How to extract retail datasources please describe clearely

how to extract retail datasources please describe clearely

Dear,
http://help.sap.com/saphelp_nw04/helpdata/en/39/e531c93747da4a8806612212b013b4/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8e/65f438c842cc2be10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/35/e58282fe8711d3b49f006094b9301e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/73/d26594107711d4af1e080009d2232d/content.htm
Also check in:
www.service.sap.com/bi -->>solution detail -->>Industry Portfolios -->> Sap Retail
Thanks

Similar Messages

How to extract the xcontrol output

I created one xcontrol for pressure sensors . I am able to display the output correctly but i could not able to use the output for other inputs .
how to extract the xcontrol output
for clear understanding please see the attached vi testing .
Attachments:
testing.vi ‏9 KB
Pressure sensors.zip ‏96 KB
testing.vi ‏9 KB

I always measure velocity in furlongs per fortnight
Units are very powerful, and like any great magic, can result in serious unintended circumstances.
I've tried them a couple of times and decided they were more difficult to use than the value provided. Maybe it's better now, but I'm still on LV 8.6
http://forums.ni.com/t5/LabVIEW/Why-do-very-few-programmers-use-LabVIEW-unit-labels/td-p/1119746
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

I would like to know how to extract my old contacts from the iTunes backup? Please explain in basic english i am a beginner

I have had my old Iphone 5s replaced with a new one but I would like to know how to extract my old contacts from the iTunes backup? Please explain in basic english i am a beginner

Hey,
I think you will find that you have to have a debit/credit card stored on yur account regardless of whether your have iTunes Credit or want to purchase a free App. I don't know why, I assume its for ID verification or is part of the terms and conditions. I occasionally have to re-verify my credit card info even when just trying to run Update on one of my Apps or like I said downloading a free App.
If you need further clarification all you can do is contact iTunes Support:
https://expresslane.apple.com/ServiceOptionAction.action
Hope this helps. Andrew

My 'clear history button is not working. When I click on it it doesn't do anything and the letter are gray instead if blue like usual. I've gone to every type of settings I can bit I don't know how to fix it. Please help .

My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .

T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Help I have 'lost' my downloads icon from the dock. Can I retrieve it? If so please describe how, using simple terms

Help I have 'lost' my downloads icon from the dock on my desktop Mac. Can I retrieve it? If so please describe how, using simple terms. I have tried searching folders, finder and trash

Your Downloads folder should be in your Home folder. Just drag it to the Dock.
If you've managed to delete it, try creating a new folder called 'Downloads'. You will probably need to nominate it in Safari or any other browser preferences as your download destination. (Safari Preferences>General, 'Save downloaded items to:' menu)

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

How to debug extraction a datasource in ecc starting execution in bw ?

HI gurus,
how to debug extraction a datasource in ecc starting execution in bw ?
Thanks.

Hi,
In your issue i thick data source trace in BW is not possible but RFC is the main criteria here if it is correct data will comes to the bw automatically when ever info package triggers.
If you need to check the data source data in trace mode and it is not coming properly, then we need to check from RSA3 by executing with debug mode check box option.
Still need any clarification let me know.
Thanks & Regards,
Srinu.Rapolu

Please can someone explain how to retrieve deleted text, I was clearing old text when one came through at the same time so was also deleted.

Can someone please tell me how to retrieve deleted text. i was clearing old texts when a new one came through at the same time and was deleted also. My last update was iOS 8.1.2

You restore from a backup that was created after the text was received but before it was deleted.
But if you literally deleted it right after it came in, then it's not recoverable. Have the other person resend the text.

How to Extract Data for a Maintenance View, Structure and Cluster Table

I want to develop 3 Reports
1) in First Report
it consists only two Fields.
Table name : V_001_B
Field Name1: BUKRS
Table name : V_001_B
Field Name2: BUTXT
V_001_B is a Maintenance View
For this one I don't Find any Datasource
For this Maintenance View, How to Extract the Data.
2)
For the 2nd Report also it consists Two Fields
Table name : CSKSZ
Field Name1: KOSTL (cost center)
Table name : CSKSZ
Field Name2: KLTXT (Description)
CSKSZ is a Structure
For this one I don't Find any Datasource
For this Structure How to Extract the Data
3)
For the 3rd Report
in this Report all Fields are belonging to a Table BSEG
BSEG is a Cluster Table
For this one also I can't Find any Datasource,
I find very Few Objects in the Datasource.
For this One, How to Extract the Data.
Please provide me step by step procedure.
Thanks
Priya

Hi sachin,
I don't get your point can you Explain me Briefly.
I have two Fields for the 1st Report
BUKRS
BUTXT
In the 2nd Report
KOSTL
KLTXT
If I use 0COSTCENTER_TEXT Data Source
I will get KOSTL Field only
what about KLTXT
Thanks
Priya

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

How to extract client source ip, which has been embedded in http header?

Can someone please tell me how to extract the client source ip which has been embedded in http header?
the web server is running SunOS 5.8 and iPlanet6.0sp6
Thanks.

Clear the cache and cookies.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies":
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*https://itunes.apple.com/us/app/bitdefender-virus-scanner/id500154009?mt=12

How to extract the data

data source is 0FI_AP_4 how to extract the data from R3 to bw

Hai Anand...
If you also Create a DataSource in R/3 Extract it Using the Transaction code RSA3 and Please Replicate DataSource in BW.....
Replication is Easy in BW....
Just Click on Right from the SourceSystem and Click the option " Replicating DataSource "....
The Datasource will be replicated in BW after Clicked.....
Assign points If It Helps 
BalajeeKannan

How to extract the Private Note data in Document Service Object?

HI EXPERTS,
In transaction ME53N, display document, click on the Service Object button and enter a Private Note.
How to extract this data and show it in a report?
Moderator message: please analyse yourself before asking, describe your own efforts and where you are stuck when posting again.
locked by: Thomas Zloch on Aug 19, 2010 1:33 PM

I did quite an amount of debug of transaction Code FB03.
SO_OBJECT_READ is the function module that is used to read this data.
The inputs are as below:
folder_id is generated from:
Within CL_GOS_SRV_PERSONAL_NOTE and METHOD check_status -->
        CALL METHOD cl_binary_relation=>read_links_of_binrel
          EXPORTING
            is_object              = is_lporb
            ip_relation            = 'PNOT'
            ip_role                = 'GOSAPPLOBJ'
          IMPORTING
            et_roles               = lt_roles
where
is_lporb-typeid = BKPF
is_lporb-catid = BO
is_lporb-instid = 'CompanyCodeDoc nofiscal year'
lt_roles-instid+12 is used for the SO_OBJECT_READ function module
Thanks,
Ven
PS: if any body comes across a better solution, let me know.

How to extract row number of geoRaster as number ?

Hi all,
I need to get the row (or similarly column and band) number of a georaster as number. Some approach that i have explored :
(a)
Using SDO_GEOR.getSpatialDimSizes, which return an sdo_Number_array. For example SDO_NUMBER_ARRAY(211, 725) means 211 rows by 725 columns.
But then how to get the 211 (or 725) as a number ? Any command for extracting the value ? substring clearly helpless.
(b)
Using metadata extract in PL/SQL. An example is
create or replace function dimRaster
(gr sdo_georaster)
return number as
total_dim number;
begin
total_dim := gr.metadata.extract('/georasterMetadata/rasterInfo/totalDimensions/text()',
'xmlns=http://xmlns.oracle.com/spatial/georaster').getNumberVal();
dbms_output.put_line('Total dimesnion'||CHR(9)||': '||total_dim);
return null;
end;-----------------
The above works fine. It extracts the value in rasterInfo>totalDimensions as NUMBER. But the following isn't working:
dim_row number;
dim_row_Str := gr.metadata.extract('/georasterMetadata/rasterInfo/dimensionSize type="ROW"/size/text()',
'xmlns=http://xmlns.oracle.com/spatial/georaster').getStringVal();
I get the following error message
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: '/georasterMetadata/rasterInfo/dimensionSize type="ROW"/size/text()'
The number that i need to extract is in rasterInfo> dimensionSize type="ROW"> size.
Please advise.
cheers,
=Damon

Here is a function to do it. Since a function can only return one value, I created an object type for it.
If this was going onto my production system, I would validate the metadata before running the procedure on a georaster object.
Hope this helps:
-- gr_dims object holds # rows, # columns, and # bands
create or replace type gr_dims as object (
r number,
c number,
b number);
create or replace function georaster_size (geor sdo_georaster)
return gr_dims deterministic is
rowcols sdo_number_array := new sdo_number_array();
result gr_dims := new gr_dims(null,null,null);
begin
rowcols.extend(3);
rowcols := SDO_GEOR.getSpatialDimSizes(geor);
result.r := rowcols(1);
result.c := rowcols(2);
result.b := SDO_GEOR.getBandDimSize(geor);
return result;
end;
select georaster_size(georaster) from map_rasters where georid=1;
--GEORASTER_SIZE(GEORASTER)(R, C, B)
--GR_DIMS(5117, 3748, 1)
select g.gr.r, g.gr.c, g.gr.b
from (select georaster_size(georaster) gr from map_rasters where georid=1) g;
-- GR.R GR.C GR.B
-- 5117 3748 1

How to extract retail datasources please describe clearely

Similar Messages

Maybe you are looking for