How to extract SXMB_MONI message in bulk

Hi All,
I want to extract messages (input and output messages) for a scenario from SXMB_MONI. The volume of message is too high (more then 1k), so i would like to ask if there is any easy way to extract the message. I am on PI 7.31 dual stack.
regards,
Harish

Hi Hareesh,
For this i need to write a program and convert the Xstring to string format (SXMB_GET_MESSAGE_PAYLOAD). But i am searching for any standard option in which i do no need to write any ABAP code.
regards,
Harish

Similar Messages

How to extract error message for each output type.

Hi All,
Need your advice on the problem that I have.
Expected Solution:
1. Create an extra column for displaying header output error message from VF02 into a report program.
Steps that i have did:
1. Go to transaction VF02.
2. Enter a billing document number.
3. Hit enter. Click "Goto" > Header> Output
4. Click on the status that is red colour. Click on "processing log".
5. Press "F1" on the red colour message type. (Found out that it is a structure).
Need your advice on the question that I have:
1) How do we know that which "not successfully" process output type belong to which error message class?

Hi Brad Bohn,
Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
From my further research and in depth debugging into this function module, i manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output. How does this internal table is populated?
Thanks in advance.
Regards
Shawn

How to extract sms messages from iphone?

im using 3gs and im trying to extract sms messages from it. but i dunno how.
thanks in advance!
and btw im also using windows.. so no mac.

Hi, I found this step by step guide explains how to backup sms from iphone to computer. You can do the extract work in a few clicks.
Hope this can hlep.
Good luck!

Xpath in BPEL: How to extract from message type to string

Hi all,
I am currently trying to extract all content from a special message type to a string. The special message is really just simple XML.
However, I wish to convert the special domain specific message to a string to send to another partnerlink.
I figured that it would be a simple matter of using an assign / copy operation using the special message and the ora:getContentAsString function.
This does not work :-(
I get the following error in the domain log:
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:getContentAsString(bpws:getVariableData('businessEventBody'))", the reason is FOTY0001: type error.
Please verify the xpath query.
Does anyone have any ideas on how to solve this?
Regards,
Aagaard


Hi,


Let me explain the scenerio:


I XSD I have is:


<xs:schema xmlns:xs="<a href="http://www.w3.org/2001/XMLSchema">http://www.w3.org/2001/XMLSchema</a>"
targetNamespace="**************"
<xs:element name="OrdDesc">
<xs:complexType>
<xs:sequence>
<xs:element name="ord" type="number10" />
<xs:element name="ord_name" type="varchar2150" />
<xs:element name=ord_add1" type="varchar2240" minOccurs="0" /> <xs:element name="ord_add2" type="varchar2240" minOccurs="0" /> <xs:element name="ord_city" type="varchar2120" minOccurs="0" /> <xs:element name="county" type="varchar2250" minOccurs="0" /> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> The runtime XML I would get: <?xml version="1.0" encoding="UTF-8" ?> <Messages> <Message> <family>New</family> <type>OrderCreate</type> <id>22</id> <messageID/> <routingInfo/> <messageData><![CDATA[<!DOCTYPE *************"> <OrdDesc> <ord>22</wh> <ord_name>Ord1</wh_name> <ord_add1>Park Avenue</wh_add1> <ord_add2/> <ord_city>XYZ</wh_city> <county/> </OrdDesc>]]></messageData> </Message> <Message> <family>New</family> <type>OrderMod</type> <id>22</id> <messageID/> <routingInfo/> <messageData><![CDATA[<!DOCTYPE *************"> <OrdDesc> <ord>22</wh> <ord_name>Ord1</wh_name> <ord_add1>Park Avenue</wh_add1> <ord_add2/> <ord_city>XYZ</wh_city> <county/> </OrdDesc>]]></messageData> </Message> </Messages> Now, the Msg type(<type>OrderCreate</type>) I am referring to is not the part of XSD, it gets generated at the time message is created. That's why I don't see that tag in the payload. Payload shows the elements of XSD. Please help.

How to extract Idocs Numbers from Bulk Purchase orders

Hi Gurus,
I have around 1400 purchase orders.I need to get their Idoc numbers to reprocess in order to generate Sales orders.Is their any process to extract the Idoc numbers of all the purchase orders at a time. Pls suggest on the same.
Thanks in Advance
Ganesh Kumar

Use t.code WE02.
Enter IDOC basic type and date ranges. This will pull the IDOC numbers.
Regards

HT201774 How do I delete excess email messages from my iPhone. There are 300 messages listed, and every time I delete some, more are added from old messages. How do I limit the number of messages that can appear on my phone? How can I delete messages i

How do I delete excess email messages from my iPhone. There are 300 messages listed, and every time I delete some, more are added from old messages. How do I limit the number of messages that can appear on my phone? How can I delete messages in bulk,

You can't.
All photos transferred from your computer are stored in the Photo Library. The photos in the album or albums below are not duplicates - they include a pointer to the original photos stored in the Photo Library. This way you can view the photos in a particular album only by selecting the album, or you can view all photos available in all albums by selecting Photo Library.
Just as with an iTunes playlist. A song cannot be in an iTunes playlist unless the song is in the main iTunes library. Placing a song in a playlist does not duplicate the song. Remove the main iTunes library or the songs from the main iTunes library that are in a playlist and the songs will no longer be in the playlist either. This way you can listen to the songs in the playlist only by selecting the playlist, or all songs in your entire iTunes library by selecting Music under Library in the iTunes source list.
The same with iPhoto on a Mac. A photo cannot be in an in iPhoto Event or Album unless the photo is in the main iPhoto library. Placing a photo in an Event or Album does not duplicate the photo. This way you can view the photos in an iPhoto Event or Album only by selecting the Event or Album, or all photos in all Events or Albums.

SXMB_MONI messages

Hi,
May I know, how to check SXMB_MONI messages with PI 7.1(/nwa)?
Sundari

Hi ,
Refer these blogs
The specified item was not found. - controlling access to msg display
The specified item was not found. - msg are not seen in sxmb_moni
The specified item was not found. - msg monitor
Enhanced Message Monitoring using Runtime Workbench and Adapter Monitor - Enhanced Msg Monitoring using RWB & adapter Monitor
The specified item was not found. - Personalized logging & tracing
Getting started with XI, part 1: XI 3.0 cheat sheet - cheat sheet of xi 3.0
Regards,
Surya

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

I receive numerous messages in "Bulk Mail". Where do they come from and how can I prevent them from being received? Thanks

Once you're on a spammer's list, there's nothing you can do to stop the flood of e-mail messages. You can either control it, using spam filtering (which is what files those messages in the Junk Mail folder), or you can throw out your e-mail address and get a new one.
It's sad, but spam is simply a fact of life at this point, and there's nothing to be done about it. Legislation has been tried, with zero success, since most spam either comes from countries with no legislation or from personal computers that have been infected with malware and are part of a "botnet."

How to extract the content of a mail message?

Friends,,,
How to extract the content of a mail message?
the message does not contain any attachments or images.
its just a plain text..
if i use message.getContent(), in addition of the content it returns headers information also...
but i need only the content of that message...
if i write code like this:
String content = (String) message.getContent();
it gives cast exception...
if the message contains only plain text, no multipart, then which method is useful to extract only the content?
please tell me friends..
thanks in advannce,
regards,
Venkata Naveen

Message.getContent() does not return headers for a simple text/plain
message. If you're getting headers, something else is wrong.
Also, casting the result to String should work.
Most likely the message really isn't a simple text/plain message.
Provide more details and we'll help you figure out what you're
doing wrong.
Also, please read the msgshow.java demo program included with JavaMail.

How to extract the actual XML document from soap message?

My problem is " how to extract the actual XML document from soap message? "
i just want to extract the attachment i.e. (pure XML document without any soap header or envolope).
i could be ver thank full if u could solve my problem.
[email protected]

Hi,
This is some skeleton code for extracting an attachment from a SOAPMessage.
import javax.activation.DataHandler.;
import javax.xml.soap.*;
import javax.xml.message.*;
Iterator allAttachments = message.getAttachments();
AttachmentPart ap1 = null;
while(allAttachments.hasNext()){
ap1 = (AttachmentPart)allAttachments.next();
//Check that the attachment is correct one. By looking at its mime headers
//Convert the attachment part into its DOM representation:
if(ap1.getContentType() == "text/xml"){
//Use the activation dataHandler class to extract the content, then create a StreamSource from
//the content.
DataHandler attachmentContent = ap1.getDataHandler();
StreamSource attachmentStream = new StreamSource(attachmentContent.getInputStream());
DOMResult domAttachment = getDOMResult(attachmentStream);
domAttachment holds an xml representation of the attachment.
Hope this helps.

How to retrive archived messages in sxmb_moni

Hi,
My client want to see specific date archive messages, how to see those messages in SXMB_MONI window. Let me know any standard program and procedure. I am using PI 7.0 version SP19.

Follow the below to activate your infostructure,then you should be able to see archived messages.
1. start SXMB_ADM
2. choose Schedule archiving jobs
3. click "Archive management"
4. click "Information System"
5. click "Customizing"
6. choose "Archive Infostructure" for Object "BC_XMB" and activate it by clicking on "Activate" button.
7. go back and click on "Status".
8. click on "Status per Infostructure"
9. select your object "SAP_BC_XMB" and click "Fill Structures"
10. run it as a background task
Thanks
Aamir

Seeburger AS2 Adapter - How to extract copy of file sent out ?

Hi Experts,
The scenario is SAP R/3 sends idoc to PI. PI converts this into a flat file and sends to Trading Partner through Seeburger AS2 adapter.
We can trace the message content in XML format within PI using SXMB_MONI or RWB. How to extract a copy of the Flat file converted by AS2 adapter and sent to Trading Partner ?
Thanks very much for you help !
Thanks,
Rukmani

>>Was hoping for a method that does not need additional coding.
None of the two methods I suggest require coding. First method just require adding 1 line in module config in your communication channel. Second method requires one addition config in receiver determination and agreements.
>>is there a way to get the converted message content from SeeBurger Workbench even for successful messages ?
No. If you have purchased Message Tracking, then you could configure that for your scenarios to view payloads. However, this method will definitely need some coding.
Regards,
Prateek Raj Srivastava

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to extract SXMB_MONI message in bulk

Similar Messages

Maybe you are looking for