How to Extract the Delivery Blocks

Hi,
I have a task to extract the Delivery Block reason of orders to BW.
Is there a standard datasource for it?
Best Regards

Hi Paolo,
I need the delivery blocks. Not delivery details.
For example, an incompleted order was saved in 01/01/07 with delivery block of reason YI (Initial Entry), and in 05/01/07 were added some lines to the order but it still block of reason 04 (Credit limit). In 10/01/07 the order was closed (the delivery block is blank).
For that order I need to extract three lines:
SO ___DeliveryBlockReason date
100999 _______YI _________01/01/07
100999 _______04_________ 05/01/07
100999 _____(blank) _______10/01/07
Hope it's more clearer now.
Regards,

Similar Messages

How to determine that the Delivery Block in SO is removed manually

Hi,
Is there any way to determine if the delivery block is removed manually? Because initially on VA01 we are defaulting the delivery block. Then in VA02, if the user removed the delivery block then save, then goes back to VA02 again, in this, I need to determine that the delivery block was removed manullay.
Regards,
Mawi

Hi,
You can check out in environment->changes ..you can determine the manual changes made to the order...
Thanks,
Shailaja Ainala.

How to extract the details of the stored procedures in the database?

Dear all,
How to extract the details of them?
Bst Rgds,
Edward

Hi Wa-Man Edward Chan,
Following is the PLSQL Block Which Will Give Package, Procedure, Function Source
set verify off
undefine which_object;
undefine which_line;
declare
Shows lines with context of:
VIEW
FUNCTION
PROCEDURE
TRIGGER
PACKAGE SPECIFICATION
PACKAGE BODY
The script uses to temporary tables ERROR_TABLE_TEMP and ERROR_CLOB_TEMP created with:
CREATE GLOBAL TEMPORARY TABLE ERROR_TABLE_TEMP(line number, text varchar2(4000));
CREATE GLOBAL TEMPORARY TABLE ERROR_CLOB_TEMP(TEXT CLOB);
v_offset number:= 5; -- Controls how many lines before and after the line in focus are to be shown
v_obj_name varchar2(100);
v_obj_type varchar2(100);
v_obj_type_new varchar2(100);
v_obj_line number;
v_counter number := 0;
v_text varchar2(32767);
v_subtext varchar2(1000);
v_from number;
v_len number;
v_marker varchar2(10);
v_found number;
v_line_from number;
v_line_to number;
v_long_text clob;
procedure ins_line (p_text in varchar2) is
begin
v_counter := v_counter + 1;
insert into error_table_temp(line,text)
values (v_counter,p_text);
end;
begin
delete error_table_temp;
select ltrim(rtrim(upper('&which_object'))), nvl(to_number('&which_line'),0)
into v_obj_name, v_obj_line
from dual;
begin
select decode(object_type,'PACKAGE','PACKAGE BODY',object_type)
into v_obj_type
from user_objects
where object_name = v_obj_name
and nvl(v_obj_line,0) > 0
and rownum = 1;
exception when no_data_found then
ins_line('ERROR: Object/line not found');
return;
end;
ins_line(v_obj_name||' ('||v_obj_type||')');
if v_obj_type in ('PACKAGE BODY','PACKAGE','FUNCTION','PROCEDURE') then
v_obj_type_new := v_obj_type;
ins_line('----------------------- PROGRAM LISTING -------------------------');
for code in (select trim(text) text, lpad(line,4,' ')||' '||decode(line,v_obj_line,'>>>>> ',' ') marker, type
from user_source
where name = v_obj_name
and line between v_obj_line-v_offset and v_obj_line+v_offset
order by decode(type,v_obj_type,1,2),line) loop
if v_obj_type_new != code.type then
ins_line(null);
v_obj_type_new := code.type;
v_counter := -100000; -- In order to show specification before body
ins_line(v_obj_name||' ('||v_obj_type_new||')');
ins_line('----------------------- PROGRAM LISTING -------------------------');
end if;
ins_line(code.marker||code.text);
end loop;
elsif v_obj_type = 'VIEW' then
select text
into v_text
from user_views
where view_name = v_obj_name;
v_line_from := v_obj_line-v_offset;
v_line_to := v_obj_line+v_offset;
v_obj_line := v_obj_line -1;
ins_line('------------------------------- PROGRAM LISTING -------------------------------');
for i in v_line_from..v_line_to loop
begin
if i = v_obj_line then
v_marker := '>>>>> ';
else
v_marker := ' ';
end if;
if i = 0 then
v_from := 0;
v_len := instr(v_text,chr(10));
else
v_from := instr(v_text,chr(10),1,i);
v_len := instr(v_text,chr(10),1,i+1) - v_from;
end if;
v_subtext := substr(v_text,v_from+1,v_len-1);
if v_len > 0 then
ins_line(lpad(to_char(i+1),4,' ')||' '||v_marker||v_subtext);
end if;
exception when others then
null;
end;
end loop;
elsif v_obj_type = 'TRIGGER' then
ins_line('----------------------- PROGRAM LISTING -------------------------');
delete error_clob_temp;
execute immediate 'insert into error_clob_temp (text) '||
'select to_lob(trigger_body) '||
'from user_triggers ' ||
'where trigger_name = '''||v_obj_name||'''';
select text
into v_long_text
from error_clob_temp;
v_obj_line := v_obj_line-1;
v_line_from := v_obj_line-v_offset;
v_line_to := v_obj_line+v_offset;
for i in v_line_from..v_line_to loop
begin
if i = v_obj_line then
v_marker := '>>>>> ';
else
v_marker := ' ';
end if;
if i = 0 then
v_from := 0;
v_len := dbms_lob.instr(v_long_text,chr(10));
else
v_from := dbms_lob.instr(v_long_text,chr(10),1,i);
v_len := dbms_lob.instr(v_long_text,chr(10),1,i+1) - v_from;
end if;
v_subtext := dbms_lob.substr(v_long_text,v_len-1,v_from+1);
if v_len > 0 then
ins_line(lpad(to_char(i+1),4,' ')||' '||v_marker||v_subtext);
end if;
exception when others then
null;
end;
end loop;
end if;
if v_counter = 0 then
ins_line('*********** NO CODE FOUND ***********');
else
ins_line(null);
end if;
exception when others then
ins_line('*********** ERROR: NOT POSSIBLE TO SHOW THE CODE ***********');
ins_line(' FEJL: '||sqlerrm);
end;
set linesize 4000
set heading off
set feedback off
set verify on
select text
from error_table_temp
order by line;
set linesize 80
set heading on
set feedback on
Prashant

How to place a delivery block at line item level from Inbound ORDERS IDoc?

Hi EDI/ABAP Experts,
Can anyone please tell me how to place a delivery block at line item level from Inbound ORDERS IDoc?
I tried using exit "EXIT_SAPLVEDA_001'. But there is no LIFSP field in either of XVBEP and YVBEP structures.
Can you guys throw some light. How to place a delivery block @ line item level on sales order from Inbound ORDERS IDoc.
Thanks,
Matt .

Look into the Include: LVEDAF5A that is the only place where this exit is hit... double click on the Structures and look which structure has billling block field.. and use that..
FORM CUSTOMER_FUNCTION_IDOC USING IDOC_DATA.
CALL CUSTOMER-FUNCTION '001'
    EXPORTING SEGMENT = IDOC_DATA
              DVTCOMAG = VTCOMAG
              DXMESCOD = IDOC_CONTRL-MESCOD
              CONTRL   = IDOC_CONTRL
    TABLES    DXBDCDATA = BDCDATA
              DXVBAP    = XVBAP
              DXVBEP    = XVBEP
              DYVBEP    = YVBEP
              DXVBADR   = XVBADR
              DYVBADR   = YVBADR
              DXVBPA    = XVBPA
              DXVBUV    = XVBUV
              DD_FLAG_P = D_FLAG_P
              DXKOMV    = XKOMV
              DXVEKP    = XVEKP
              DYVEKP    = YVEKP
    CHANGING DXVBAK   = XVBAK
              DD_FLAG_K = D_FLAG_K
    EXCEPTIONS
              USER_ERROR = 01.
If you are in ECC6.0 you can also use Enhancement point : INTERPRET_IDOC_ORDERS_01 SPOTS ES_SAPLVEDA. in include: LVEDAF2U

How to extract the column width in ALv report if its executed in background

I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extract coulmns in back ground.
I have executed in background and checked the spool and for some of the columns width is not sufficient to display comeplete data so please suggest how to extract the columns sizes if executed inj background for an ALV

Hi Deepthi,
you can try with the above mentioned suggestions ,if its worked its fine ,
If not use Docking container instead of custom container, For ALV in back ground jobs, its suggest to use docking container instead of custom container , below you can find the declaration for docking container and code to use docking and custom container in your program for fore and back ground.
or you can use docking container alone for both operations.
Data : G_DOCK1 TYPE REF TO CL_GUI_DOCKING_CONTAINER,
IF CCON IS INITIAL. (ccon is container name )
*Check whether the program is run in batch or foreground
    IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
*Run in foreground
      CREATE OBJECT CCON
        EXPORTING
          CONTAINER_NAME = 'CON1'.
    CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = parent_1.
ELSE.
*Run in background
      CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = G_DOCK1.
    ENDIF.
ENDIF.
B&R,
Saravana.S

How to determine the delivery plant in a CRM Sales Order

Hi experts:
In CRM how to work the delivery plant determination? and I can change the Plan in a Sales Order before its download to ECC?
I download the DNL_PLANT object but i don't understand what is the functionality of these are created like business partner in CRM.
Thanks in advanced by your orientation about these questions that have me a little bit confuse.
Sussie

Hi Reddy
Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
I know that in R/3 is determined by:
1. Customer-Material info record (Sales Area data)
2. Customer Master data (Sales area data)
3. Material Master data (Sales-area data)
I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
it?? and where in the crm sales order before it is download to R/3??
Thanks
Sussie

How to restrict the delivery quantity not more than target quantity?

Dear Gurus,
How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
Any other effective method? Please advice. Thanks.
Regards,
David

Dear all,
It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
I think there must be somewhere besides of those you menetioned.
I notes that SAP help for the overdelivery tollerance setting of scheduling agreement:
Overdelivery Tolerance Limit
Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
Dependencies
If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
Pls help! Thanks.
Regards,
David

How to clear the delivery group in sales order?

Dear All:
My sales order is auto created from CRM by BAPI, but in vbap table, the GRKOR field is 001, only one order , how to clear the delivery group in the sales order ?
Regards
Peter.

Thread Locked - Reason Duplicate Post
How to clear the delivery group in sales order?
Please dont post the same query twice. Continue all your queries in one thread
G. Lakshmipathi

How to get the Delivery address for PO

I have a problem.
I am working on a SAP Script , which is for PO(Zmedruck_po) , which is a copy of
MEDRUCK.
I am asked to print the delivery adress in a window .
The scenario is like this .
In ME23N , under item details , there is a tab called DELIVERY ADDRESS
this has option to enter the adress details or a delivery number in the address text box .
If the address number is present i have to print that address , else i have to print the address which is entered in the delivery address tab.
If the delivey address number is there i have no problem in printing it ,But if address number is not there ,I need to know how to get the delivery address,
is it the plant address, company code address ... ?
I debuged ,but could not find out.
Can anyone help please .

Hi,
try using the below method:
Goto TWLAD table with storage location (EKPO-LGORT) as key to get address number (ADDRNUMBER). then goto ADRC table to get the address of the delivery
Regards
Shiva

How to extract the historical data from R/3

hi
I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
regards

Hi Satish,
As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
After data source enhancement it is supported to load normally because you don't get any historical data for that field.
Best way is to take down time from the users, normally we do in weekends/non-business hours.
Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
1. Load set-up tables by yearly basis as a background job.
2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
Then after you can load all the data into BI first into PSA and then into Cube.
Regards,
Ravi Kanth.

How to Extract the data from R/3 Genric extractor to BW ?

How to Extract the data from R/3 Genric extractor to BW ?

hi,
step by step procedure for generic extraction delta
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Refer:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
New to Materials Management / Warehouse Management?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
Ramesh

How to Extract the Highlight Text in PDF File

Hi Scripters,
i want know, how to extract the hightlight text in pdf files for text only format for (*.txt) file extension save.
regards
baby

Hi,
Okay i'll try do best.
thanks for your reply.
Regards
Baby

How to extract the content of a mail message?

Friends,,,
How to extract the content of a mail message?
the message does not contain any attachments or images.
its just a plain text..
if i use message.getContent(), in addition of the content it returns headers information also...
but i need only the content of that message...
if i write code like this:
String content = (String) message.getContent();
it gives cast exception...
if the message contains only plain text, no multipart, then which method is useful to extract only the content?
please tell me friends..
thanks in advannce,
regards,
Venkata Naveen

Message.getContent() does not return headers for a simple text/plain
message. If you're getting headers, something else is wrong.
Also, casting the result to String should work.
Most likely the message really isn't a simple text/plain message.
Provide more details and we'll help you figure out what you're
doing wrong.
Also, please read the msgshow.java demo program included with JavaMail.

How to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

how to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

Let's say you have a zipped audio collection (audio.zip) containing mp3 files. And you are at a Terminal prompt.
List the files in the zip archive
unzip -l audio.zip (that is ell)
Extract all mp3 audio files into a new home directory folder called mymusic
unzip -d ~/mymusic audio.zip \*.mp3
Variations of the above will depend the zip contents, and internal structure. If the zipped audio collection was gzipped, or someone used rar on it, then the extraction process will be different.

How to extract the senders IP address of an email?

How to extract the senders IP adress of an email using applescript ??

Maybe this will help.
Extract email addresses from email header - Sender (From) - Mail

How to Extract the Delivery Blocks

Similar Messages

Maybe you are looking for