How to Extract the Hierarchy Set from R/3 into BW

Hi all,
     A Hierarchy Set Z_XX has been created for 0STKEYFIG InfoObject with the
following details in R/3 for :
     Table: CCSS
     Field: STAGR (Statistical Key Figure).
I have tried to Refresh the Hierarchies with ' Available Hierarchies from OLTP'   button on 'Hierarchy Selection' tab from Hierarchy InfoPackage, but I didn't find this new Hierarchy set.
How to bring this Set in to BW? Does it require any other process in R/3 side, PLEASE ?
Thanks.

Hi Voodi,
   When I clicked 'Where Used' button then 'Display Set : Subordinate Sets' displayed with the following info.
No.           Set Id
001     Z_36_STAT_CDVHSMSOLD     TOTAL HSM SOLD-COMBINED
002     Z_36_STAT_CDVKGSCONS     Kilograms of Rollstock Consumed
003     Z_36_STAT_CDVLBSCONS     Pounds of Rollstock Consumed
004     Z_36_STAT_CDVMSFSOLD     MSF SOLD - Combined
Thanks.

Similar Messages

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to extract the historical data from R/3

hi
I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
regards

Hi Satish,
As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
After data source enhancement it is supported to load normally because you don't get any historical data for that field.
Best way is to take down time from the users, normally we do in weekends/non-business hours.
Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
1. Load set-up tables by yearly basis as a background job.
2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
Then after you can load all the data into BI first into PSA and then into Cube.
Regards,
Ravi Kanth.

How to extract the signal out from the waveform by my designated power level?

Dear all,
How can I extract the signal from the waveform accroding to the power level? I read the Trigger&Gate.vi, but this vi extract signal according to the duration time. I want to extract signal according to power level.
As shown in the following figures, the signal I want to process is between 130000 to 140000, if I zoom in, I can see the the useful signal is between 135400 to 138200. The question is how to extract the signal in the zone?
I tried the sub_NoiseEst_And_Chop_Shell.vi in the Packet_based_link example too, but this subvi seemed to be a little slow. Can anybody give me better advice? Thanks in advance!
Solved!
Go to Solution.

I was working on something similar but haven't had time to fully develop it.
My idea was to use an envelope detector (low pass filter) and then use an energy detection VI on the envelope.
Here's where I left off
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
test.vi ‏331 KB

How to extract the red layer from BayerRG8 file with VBAI?

Dear readers,
We're currentely trying to build a inspection program using a CVS and two cameras.
A first question to help us: How can we extract the red layer from a Bayer RG8 image?
To illustrate a lit bit more: lets take a picture of chilis and tomatoes plants. We would like to extract the red color of the picture to know where the vegetable are and if they are eatable.
So, in a first time, we just want to see the red layer of the picture.
On a second step, we would like to extract the poistion of the red areas and rank them according to intensities and store all the relevant data in a .txt file.
Thank in advance for the time you will spend on that topic.
Regards

Maybe including a picture with the info you want would help. It sounds like you could use a detect object step (which works with color images), and you could get the position of all red objects. I would also recommend using the Hue plane instead of the Red plane to look for color since this is more robust to lighting changes. Once you have the bounding box for each red object, you can create a programmatic ROI around it and use the Measure Color step to get detailed color information about your reb objects. Here's a sample inspection that uses colored candy to give you an example of what I'm suggesting. Let us know if more specifically what you are looking for if this doesn't help. The example is in VBAI 2012. Let us know what version of VBAI you are using because this may affect what functionality you can use.
Thanks,
Brad
Attachments:
Color Example.zip ‏358 KB

How to change the Character Set from AL32UTF8 to WE8DEC

Hello!!
I want to know how to change the character set in the database from AL32UTF8 to WE8DEC.
I tried to use the comand ALTER DATABASE CHARACTER SET but I got an error because WE8DEC is not a superset of AL32UTF8.
I need to import tables from a server that uses WE8DEC. So when I do the import to my server, wich has AL32UTF8 , I can't import the rows that include an Ñ.
So I want to change the caracter set to WE8DEC. How can I do it?
Is it needed to change the language configuration? The remote server has AMERICAN_AMERICA, and my server has MEXICAN SPANISH_MEXICO (both uses text in spanish).
Thanks a lot!!

When you export from WE8DEC server what did you use
for NLS_LANG char set? And when importing?
The export was done in another computer because I can't do the export in the server (I have 10g, and the remote server has 9i and the export is not working). In my server, when I tried to do the import, the NS_LANG value was MEXICAN SPANISH_MEXICO.WE8MSWIN1252.
When I try to import to my database I got the error:
import done in WE8DEC character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing USRMCR06's objects into PRIMARIZACION
. . importing table "CHG_FONDOS_MARZO_CD_MOR"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "PRIMARIZACION"."CHG_FONDOS_MARZO_CD_MOR".
"NOMBRE" (actual: 41, maximum: 40)
Column 1 16623436
Column 2
Column 3 Pymes_1
Column 4

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to read the hierarchy data from the same table using loop in AMDP method

Hi All,
We have a requirement to get the top partner from BUT050 table.
Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
Example:
For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
For partner 3523(BUT050-PARTNER1) there is partner 4544 (BUT050-PARTNER2) last level .
so in this case for the partner 1234 the Top parent is 4544 .
I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
IV_Parent is the input partner and ev_top_parent is the output value.
AMDP Procedure Method:
    DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
    DECLARE found INT := 1;
          iv_partner1 = SELECT partner1 FROM but050
                          WHERE partner2 = iv_partner
                          AND reltyp = :iv_hierarchy
                          AND date_to >= :lv_date
                          AND date_from <= :lv_date;
     WHILE found <> 0 do
       select partner1 into ev_top_parent from :iv_partner1;
                       iv_partner1 = SELECT partner1 FROM but050
                       WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
                       AND reltyp = 'ZBP004'
                       AND date_to >= :lv_date
                       AND date_from <= :lv_date;
       select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
    END WHILE;
This method is working fine, but here it is only taking one single partner and getting the top parent as output.
Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
Thanks.
Regards,
Laxman.P

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

How to extract the budget data from essbase to Ms access database

Hi,
i want to know how to extract budget dat fro hyperion to Ms access database
please help me in this regard how to proceed, and what are the process i need to follow
Regards
Hypuser

You can write a Calc script to export only the 'Budget' data and loaded back the exported file into MS Database via Loader or import.
Cheers
Cnee:)

How to extract the hierarchy(in the levels) into BW

Thanks in advance.
Edited by: S MB on May 6, 2009 11:13 AM
Edited by: S MB on May 6, 2009 11:14 AM

hi,
You can create the mapping between the hierarchy datasource in BW to the masterdata object.And then creation of infopackeage and extract the data.
While creating the transfer rules, mapping is to be done to Header and Node i.e, on the top of communication structure you get an option 'Segment' which has dropdown Header/Node. You can map the objects and load the data.
Let me know if you are expecting the same or any further details.
Regards,
Geetha.

How to extract the Title info from multiple PDFs

Is there a utility or some program that will extract the Title info (located in the Title field under the Description tab from Document Properties)? I have hundreds of PDFs that I would like to be able to have extracted into some txt file or excel file. Any ideas? Thanks!

I was working on something similar but haven't had time to fully develop it.
My idea was to use an envelope detector (low pass filter) and then use an energy detection VI on the envelope.
Here's where I left off
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
test.vi ‏331 KB

How to store the data captured from oscilloscope into the MS Access database table

Hi All,
In my application, I tried to save the data captured from SCOPE, but could store only 200 bytes. I've taken the Memo data type for the field in database. I want to store all data ( 4 channels) in one field & retrieve back and display on the XY Graph.
Thanks in advance.
Regards,
Shrini

kramish wrote:
Im pretty sure that Access does support JDBCNo it does not. It supports ODBC.
just doing a quick Google came up with some pages:
http://blog.taragana.com/index.php/archive/access-microsoft-access-database-from-java-using-jdbc-odbc-bridge-sample-code/
http://www.javaworld.com/javaworld/javaqa/2000-09/03-qa-0922-access.html
Both articles explains how to use the jdbc-odbc bridge. I think I've seen a pure jdbc driver for access but it wasn't from Microsoft and it wasn't free.
Kaj

How to get the alert context from scom event into incident description?

Hello,
I user SCO for creating incidents of SCOM events. My problem ist that in some events the most interesting information is standing in AlertContext. But I cannot add this text to the descritipn field of our incident tool. If I user the published variable Context
from MonitorAlert the creating of the incident fails. The right information is standing in the Params field of the Context content. But if I add the Params variable from MonitorAlert there is not the content given.
So how can I add the AlertContext information in my incident content?

Hi,
I use the Publish Data Context from "Get Alert" and the xpath-Query below to get the short name of the service if Alert is "Windows service stopped".
I think it's difficult to have a default Query because the Context is too various fot all OpsMgr Alerts.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

How to keep the eyedropper tool from spontaneously changing into color theme tool?

How can I keep the eyedropper tool from changing into the color theme tool? Is there a key command? Its very annoying when I am trying to copy format and it keep changing spontaneously into the color them tool. Using CC and OS 10.9.5 on a Mac Book Pro. Thanks!

You can't. Terminal brainfade by the engineers.

How to Extract the Hierarchy Set from R/3 into BW

Similar Messages

Maybe you are looking for