How to extract the senders IP address of an email?

How to extract the senders IP adress of an email using applescript ??

Maybe this will help.
Extract email addresses from email header - Sender (From) - Mail

Similar Messages

  • How to extract the customer's list

    Hi,
    Please help me how to extract the list of customers (sold-to-party) for whom email id is not maintained in contact person's details.
    Waiting for ur replies..
    Thanks in advance.
    Regards,
    Rahul

    Hi,
    You can select the data from KNVK..
    Get the customers..
    Then use the personnel numbers KNVK-PRSNR
    to get the email address from the table ADR6..
    If there is no value in the ADR6-SMTP_ADDR ..Then the email address is not maintained..
    Thanks,
    Naren

  • How to extract the column width in ALv report if its executed in background

    I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extract coulmns in back ground.
    I have executed in background and checked the spool and  for some of the columns width is not sufficient to display comeplete data so please suggest how to extract the columns sizes if executed inj background for an ALV

    Hi Deepthi,
    you can try with the above mentioned suggestions ,if its worked its fine ,
    If not use Docking container instead of custom container, For ALV in back ground jobs, its suggest to use docking container instead of custom container , below you can find the declaration for docking container and code to use docking and custom container in your program for fore and back ground.
    or you can use docking container alone for both operations.
    Data : G_DOCK1 TYPE REF TO CL_GUI_DOCKING_CONTAINER,
    IF CCON IS INITIAL. (ccon is container name )
    *Check whether the program is run in batch or foreground
        IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
    *Run in foreground
          CREATE OBJECT CCON
            EXPORTING
              CONTAINER_NAME = 'CON1'.
        CREATE OBJECT GRID1
            EXPORTING
              I_PARENT = parent_1.
    ELSE.
    *Run in background
          CREATE OBJECT GRID1
            EXPORTING
              I_PARENT = G_DOCK1.
        ENDIF.
      ENDIF.
    B&R,
    Saravana.S

  • How to extract the historical data from R/3

    hi
    I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
    how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
    regards

    Hi Satish,
    As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
    After data source enhancement it is supported to load normally because you don't get any historical data for that field.
    Best way is to take down time from the users, normally we do in weekends/non-business hours.
    Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
    1. Load set-up tables by yearly basis as a background job.
    2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
    This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
    Then after you can load all the data into BI first into PSA and then into Cube.
    Regards,
    Ravi Kanth.

  • How to Extract the data from R/3 Genric extractor to BW ?

    How to Extract the data from R/3 Genric extractor to BW ?

    hi,
    step by step procedure for generic extraction delta
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Refer:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Generic Extraction via Function Module
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Extractions in BI
    https://www.sdn.sap.com/irj/sdn/wiki
    New to Materials Management / Warehouse Management?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
    Ramesh

  • How to retrieve the server IP address

    Hi Experts,
    In my scenario, if some problem occur, then the XSLT mapping sends a mail to some one,subject is 'PRD', if we execute this from production or quality or development server.
    But now i want to know this mail from which server, so i want to change the subject line as 'PRD' if it is only from production system otherwise 'OTH', how to achieve this ? No hard code allow at any where.
    I have one thought, if we find the server ip address then we can recognize, but how to get the server IP address ? Is it possible ?
    Thanks
    Ramesh

    Hi,
    My source is some WSDL file, this is more than 15000 characters so i am unable to send the full file.
    <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
         <wsdl:types>
              <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                   <xsd:import namespace="http://www.w3.org/XML/1998/namespace" schemaLocation="http://www.w3.org/2001/xml.xsd" />
                   <xsd:element name="Pip3A4PurchaseOrderRequest" type="Pip3A4PurchaseOrderRequest" />
                   <xsd:complexType name="Pip3A4PurchaseOrderRequest">
                        <xsd:sequence>
                             <xsd:element name="fromRole" type="fromRole" />
                             <xsd:element name="GlobalDocumentFunctionCode" type="xsd:string" />
                             <xsd:element name="PurchaseOrder" type="PurchaseOrder" />
                             <xsd:element name="thisDocumentGenerationDateTime" type="thisDocumentGenerationDateTime" />
                             <xsd:element name="thisDocumentIdentifier" type="thisDocumentIdentifier" />
                             <xsd:element name="toRole" type="toRole" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="fromRole">
                        <xsd:sequence>
                             <xsd:element name="PartnerRoleDescription" type="PartnerRoleDescription" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="PartnerRoleDescription">
                        <xsd:sequence>
                             <xsd:element name="ContactInformation" type="ContactInformation" minOccurs="0" />
                             <xsd:element name="GlobalPartnerRoleClassificationCode" type="xsd:string" />
                             <xsd:element name="PartnerDescription" type="PartnerDescription" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="ContactInformation">
                        <xsd:sequence>
                             <xsd:element name="contactName" type="contactName" minOccurs="0" />
                             <xsd:element name="EmailAddress" type="xsd:string" minOccurs="0" />
                             <xsd:element name="facsimileNumber" type="facsimileNumber" minOccurs="0" />
                             <xsd:element name="telephoneNumber" type="telephoneNumber" minOccurs="0" />
                             <xsd:element name="PhysicalAddress" type="PhysicalAddress" minOccurs="0" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="contactName">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="FreeFormText">
                        <xsd:simpleContent>
                             <xsd:extension base="xsd:string">
                                  <xsd:attribute ref="xml:lang" />
                             </xsd:extension>
                        </xsd:simpleContent>
                   </xsd:complexType>
                   <xsd:complexType name="facsimileNumber">
                        <xsd:sequence>
                             <xsd:element name="CommunicationsNumber" type="xsd:string" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="telephoneNumber">
                        <xsd:sequence>
                             <xsd:element name="CommunicationsNumber" type="xsd:string" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="PartnerDescription">
                        <xsd:sequence>
                             <xsd:element name="BusinessDescription" type="BusinessDescription" />
                             <xsd:element name="GlobalPartnerClassificationCode" type="xsd:string" minOccurs="0" />
                             <xsd:element name="PhysicalAddress" type="PhysicalAddress" minOccurs="0" />
                             <xsd:element name="ContactInformation" type="ContactInformation" minOccurs="0" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="BusinessDescription">
                        <xsd:sequence>
                             <xsd:element name="GlobalBusinessIdentifier" type="xsd:string" minOccurs="0" />
                             <xsd:element name="GlobalSupplyChainCode" type="xsd:string" minOccurs="0" />
                             <xsd:element name="businessName" type="businessName" minOccurs="0" />
                             <xsd:element name="NationalBusinessTaxIdentifier" type="NationalBusinessTaxIdentifier" minOccurs="0" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="PurchaseOrder">
                        <xsd:sequence>
                             <xsd:element name="AccountDescription" type="AccountDescription" minOccurs="0" />
                             <xsd:element name="comments" type="comments" minOccurs="0" />
                             <xsd:element name="ContractInformation" type="ContractInformation" minOccurs="0" maxOccurs="unbounded" />
                             <xsd:element name="DocumentReference" type="DocumentReference" minOccurs="0" maxOccurs="unbounded" />
                             <xsd:element name="FinancingTerms" type="FinancingTerms" minOccurs="0" maxOccurs="unbounded" />
                             <xsd:element name="generalServicesAdministrationNumber" type="generalServicesAdministrationNumber" minOccurs="0" />
                             <xsd:element name="GlobalGovernmentPriorityRatingCode" type="xsd:string" minOccurs="0" />
                             <xsd:element name="GlobalPurchaseOrderFillPriorityCode" type="xsd:string" minOccurs="0" />
                             <xsd:element name="GlobalPurchaseOrderTypeCode" type="xsd:string" maxOccurs="unbounded" />
                             <xsd:element name="governmentContractIdentifier" type="governmentContractIdentifier" minOccurs="0" />
                             <xsd:element name="installAt" type="installAt" minOccurs="0" />
                             <xsd:element name="isDropShip" type="isDropShip" />
                             <xsd:element name="OrderShippingInformation" type="OrderShippingInformation" minOccurs="0" />
                             <xsd:element name="ProductLineItem" type="ProductLineItem" maxOccurs="unbounded" />
                             <xsd:element name="proprietaryInformation" type="proprietaryInformation" minOccurs="0" />
                             <xsd:element name="requestedEvent" type="requestedEvent" minOccurs="0" />
                             <xsd:element name="requestedShipFrom" type="requestedShipFrom" minOccurs="0" maxOccurs="unbounded" />
                             <xsd:element name="SecondaryBuyer" type="SecondaryBuyer" minOccurs="0" />
                             <xsd:element name="shipTo" type="shipTo" minOccurs="0" />
                             <xsd:element name="TaxExemptStatus" type="TaxExemptStatus" minOccurs="0" />
                             <xsd:element name="totalAmount" type="totalAmount" minOccurs="0" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="AccountDescription">
                        <xsd:sequence>
                             <xsd:element name="accountName" type="accountName" />
                             <xsd:element name="AccountNumber" type="xsd:string" minOccurs="0" />
                             <xsd:element name="billTo" type="billTo" minOccurs="0" />
                             <xsd:element name="CreditCard" type="CreditCard" minOccurs="0" />
                             <xsd:element name="financedBy" type="financedBy" minOccurs="0" />
                             <xsd:element name="GlobalAccountClassificationCode" type="xsd:string" minOccurs="0" />
                             <xsd:element name="prePaymentCheckNumber" type="prePaymentCheckNumber" minOccurs="0" />
                             <xsd:element name="WireTransferIdentifier" type="xsd:string" minOccurs="0" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="accountName">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="billTo">
                        <xsd:sequence>
                             <xsd:element name="PartnerRoleDescription" type="PartnerRoleDescription" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="PhysicalAddress">
                        <xsd:sequence>
                             <xsd:element name="addressLine1" type="addressLine1" minOccurs="0" />
                             <xsd:element name="addressLine2" type="addressLine2" minOccurs="0" />
                             <xsd:element name="addressLine3" type="addressLine3" minOccurs="0" />
                             <xsd:element name="cityName" type="cityName" minOccurs="0" />
                             <xsd:element name="GlobalCountryCode" type="xsd:string" minOccurs="0" />
                             <xsd:element name="GlobalLocationIdentifier" type="xsd:string" minOccurs="0" />
                             <xsd:element name="NationalPostalCode" type="xsd:string" minOccurs="0" />
                             <xsd:element name="postOfficeBoxIdentifier" type="postOfficeBoxIdentifier" minOccurs="0" />
                             <xsd:element name="regionName" type="regionName" minOccurs="0" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="addressLine1">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="addressLine2">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="addressLine3">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="cityName">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="postOfficeBoxIdentifier">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="regionName">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="businessName">
                        <xsd:sequence>
                             <xsd:element name="FreeFormText" type="FreeFormText" />
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="CreditCard">
                        <xsd:sequence>
                             <xsd:element name="cardHolderName" type="cardHolderName" />
                             <xsd:element name="creditCardIdentifier" type="creditCardIdentifier" />
                             <xsd:element name="expiryDate" type="expiryDate" />
                             <xsd:element name="GlobalCreditCardClassificationCode" type="xsd:string">

  • How to Extract the Highlight Text in PDF File

    Hi Scripters,
    i want know, how to extract the hightlight text in pdf files for text only format for (*.txt) file extension save.
    regards
    baby

    Hi,
    Okay i'll try do best.
    thanks for your reply.
    Regards
    Baby

  • How to extract the content of a mail message?

    Friends,,,
    How to extract the content of a mail message?
    the message does not contain any attachments or images.
    its just a plain text..
    if i use message.getContent(), in addition of the content it returns headers information also...
    but i need only the content of that message...
    if i write code like this:
    String content = (String) message.getContent();
    it gives cast exception...
    if the message contains only plain text, no multipart, then which method is useful to extract only the content?
    please tell me friends..
    thanks in advannce,
    regards,
    Venkata Naveen

    Message.getContent() does not return headers for a simple text/plain
    message. If you're getting headers, something else is wrong.
    Also, casting the result to String should work.
    Most likely the message really isn't a simple text/plain message.
    Provide more details and we'll help you figure out what you're
    doing wrong.
    Also, please read the msgshow.java demo program included with JavaMail.

  • How to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

    how to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

    Let's say you have a zipped audio collection (audio.zip) containing mp3 files. And you are at a Terminal prompt.
    List the files in the zip archive
    unzip -l audio.zip (that is ell)
    Extract all mp3 audio files into a new home directory folder called mymusic
    unzip -d ~/mymusic audio.zip \*.mp3
    Variations of the above will depend the zip contents, and internal structure. If the zipped audio collection was gzipped, or someone used rar on it, then the extraction process will be different.

  • How to know the assigned IP address on Access Point

    Hi, we have several cisco access points model here in our office, one of which is currently unused and I would like to know how to view the assigned IP Address and login information without resetting the device.
    Cisco AP: Cisco Small Business Pro AP541N
    Someone teach before on how to do it but it was long time ago and I already forgot the procedure.
    Hoping someone can guide me through on how to do it.
    Best regards,
    Duane

    Hello Duane,
    How to determine ip address of APs:
    Login to the switch where the APs are connected and enter the following command.
    show cdp neighbor detail.
    As long as CDP is enabled, this will display all directly connected Cisco devices, which will include the ip addresses of each device.
    Login info:
    You can try the default login user id: cisco and password:cisco.
    Hope this helps.

  • How to reset the network IP address from terminal/command line in Mac OSX?

    Do anyone knows how to set the network IP address from terminal/command line in Mac OS X?

    how about a GUI, ever heard of a GUI? it's this really neat thing, where you don't have to worry about remembering long strings of text to do something. Mac OS X actually has a rather decent one (that was sarcasm by the way, Mac is the best) you could have it done in like 30 sec, if you use the network pane of system preferences.

  • How to change the source ip address

    hi all,
    i got the problem that how to change the source ip address when i
    get a website's page!
    i mean i want to change the source ip address when i access the
    remote website, sure i know when change the source ip, i can not get
    the result correctly when changing the source ip address, but it is not
    important to get the result i just want to send out a "click" event to the website by calling a post method in the site!
    does anybody have some ideas?
    Best Regards,
    Eric Gau

    Here's some code that connects to google and does a get:
    import java.io.*;
    import java.net.*;
    public class HTTPTest {
        private Socket sock;
        private BufferedReader in;
        private BufferedWriter out;
        private boolean running = false;
        HTTPTest() {
        private void go(String site) {
            try {
                sock = new Socket(site, 80);
                in = new BufferedReader(new InputStreamReader(sock.getInputStream()));
                out = new BufferedWriter(new OutputStreamWriter(sock.getOutputStream()));
                System.out.println("Connected");
                out.write("GET / HTTP/1.1\r\n\r\n");
                out.flush();
                doRead();
            } catch (IOException e) {
                e.printStackTrace();
        private void doRead() {
            running = true;
            String line;
            System.out.println("Read started");
            while (running) {
                try {
                    line = in.readLine();
                } catch (IOException e) {
                    e.printStackTrace();
                    line = null;
                if (line == null) {
                    running = false;
                } else {
                    System.out.println(line);
            System.out.println("Socket closed");
        public static void main(String [] args) {
            String site;
            if (args.length > 0) {
                site = args[0];
            } else {
                site = "google.ca";
            new HTTPTest().go(site);
    }

  • How to extract the signal out from the waveform by my designated power level?

    Dear all,
         How can  I extract the signal from the waveform accroding to the power level? I read the Trigger&Gate.vi, but this vi extract signal according to the duration time. I want to extract signal according to power level.
         As shown in the following figures, the signal I want to process is between 130000 to 140000, if I zoom in, I can see the the useful signal is between 135400 to 138200. The question is how to extract the signal in the zone?  
        I tried the sub_NoiseEst_And_Chop_Shell.vi in the Packet_based_link example too, but this subvi seemed to be a little slow. Can anybody give me better advice? Thanks in advance!
    Solved!
    Go to Solution.

    I was working on something similar but haven't had time to fully develop it.
    My idea was to use an envelope detector (low pass filter) and then use an energy detection VI on the envelope.
    Here's where I left off
    Anthony F.
    Product Marketing Engineer
    National Instruments
    Attachments:
    test.vi ‏331 KB

  • How to extract the date value of IBOR date="12/12/2009"

    I have the following query, but do not get the date value out:
    WITH ibors AS (
    SELECT xmltype('<?xml version="1.0" encoding="utf-8"?>
    <IBOR date="12/12/2009">
    <LIBOR currency="USD">
    <OneYear>1.38875</OneYear>
    </LIBOR>
    </IBOR>
    ') ibor_xml
    FROM dual
    SELECT i.ibor_date, i.ibor_oneyear
    FROM ibors,
    XMLTABLE(
    '//IBOR'
    PASSING ibors.ibor_xml
    COLUMNS ibor_date VARCHAR2(20) PATH '/IBOR/date',
    ibor_oneyear VARCHAR2(20) PATH '/IBOR/LIBOR/OneYear'
    ) i;
    How to extract the date value of <IBOR date="12/12/2009">?

    Hi,
    The date is an attribute of element IBOR. So you must use "@date" in the xpath expression :
    WITH ibors AS (
    SELECT xmltype('<?xml version="1.0" encoding="utf-8"?>
    <IBOR date="12/12/2009">
    <LIBOR currency="USD">
    <OneYear>1.38875</OneYear>
    </LIBOR>
    </IBOR>
    ') ibor_xml
    FROM dual
    SELECT i.ibor_date, i.ibor_oneyear
    FROM ibors,
    XMLTABLE(
    '//IBOR'
    PASSING ibors.ibor_xml
    COLUMNS
    ibor_date VARCHAR2(20) PATH '/IBOR/@date',
    ibor_oneyear VARCHAR2(20) PATH '/IBOR/LIBOR/OneYear'
    ) i;

  • How to extract the Fast Formula Body through database?

    Hi All
    The Oracle fast formulas are stored in the ff_formulas_f table under the column formula_text having the datatype long. I want to extract the formula text through back end. When I use the statement, Select formula_text from ff_formulas_f, I am getting only the first line.
    How to extract the full formula text?
    Regards
    Rahman

    Here's a unix shell script to do it for you based on the info given by the other posters.
    #!/bin/sh
    if \[ "$1" == "" \]; then
    echo Syntax: $0 FAST_FORMULA_NAME
    exit 1
    fi
    ffname=`echo $1|tr \[:lower:\] \[:upper:\]`; export ffname
    sqlplus -silent $ORAUSER/$ORAPASSWD <<END
    set define off serveroutput on format wrapped linesize 512 pagesize 0 feedback off verify off heading off echo off pause off long 100000
    column formula_text format a512;
    select formula_text from ff_formulas_f where formula_name = '$ffname';
    exit;
    END
    Also this will list the formula names given a substring:
    #!/bin/sh
    if \[ "$1" == "" \]; then
    echo Syntax: $0 FAST_FORMULA_NAME
    exit 1
    fi
    ffname=`echo $1|tr \[:lower:\] \[:upper:\]`; export ffname
    sqlplus -silent $ORAUSER/$ORAPASSWD <<END
    set define off serveroutput on format wrapped linesize 512 pagesize 0 feedback off verify off heading off echo off pause off long 5000
    select formula_name from ff_formulas_f where formula_name like '%$ffname%';
    exit;
    END

Maybe you are looking for