How to extract the TCP Parameters?

How do i extract the TCP/IP parameters set on a solaris 8 system?

To get names of available tcp kernel parameter run the following:
ndd -get /dev/tcp \?
To get the value of a tcp kernel parameter:
ndd -get /dev/tcp <parameter name>
such as
ndd -get /dev/tcp tcp_time_wait_interval
For the meaning of different parameter consult Solaris kernel tuning reference (look on docs.sun.com)

Similar Messages

How to extract the column width in ALv report if its executed in background

I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extract coulmns in back ground.
I have executed in background and checked the spool and for some of the columns width is not sufficient to display comeplete data so please suggest how to extract the columns sizes if executed inj background for an ALV

Hi Deepthi,
you can try with the above mentioned suggestions ,if its worked its fine ,
If not use Docking container instead of custom container, For ALV in back ground jobs, its suggest to use docking container instead of custom container , below you can find the declaration for docking container and code to use docking and custom container in your program for fore and back ground.
or you can use docking container alone for both operations.
Data : G_DOCK1 TYPE REF TO CL_GUI_DOCKING_CONTAINER,
IF CCON IS INITIAL. (ccon is container name )
*Check whether the program is run in batch or foreground
    IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
*Run in foreground
      CREATE OBJECT CCON
        EXPORTING
          CONTAINER_NAME = 'CON1'.
    CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = parent_1.
ELSE.
*Run in background
      CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = G_DOCK1.
    ENDIF.
ENDIF.
B&R,
Saravana.S

How to use the TCP/IP in Java?Thanks!

How to use the TCP/IP in Java?Thanks!

Look at the java.net package, more specifically to classes ServerSocket (The server TPC conection) and Socket (the client TCP conection)
Abraham

How to extract the historical data from R/3

hi
I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
regards

Hi Satish,
As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
After data source enhancement it is supported to load normally because you don't get any historical data for that field.
Best way is to take down time from the users, normally we do in weekends/non-business hours.
Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
1. Load set-up tables by yearly basis as a background job.
2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
Then after you can load all the data into BI first into PSA and then into Cube.
Regards,
Ravi Kanth.

How to Extract the data from R/3 Genric extractor to BW ?

How to Extract the data from R/3 Genric extractor to BW ?

hi,
step by step procedure for generic extraction delta
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Refer:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
New to Materials Management / Warehouse Management?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
Ramesh

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to Extract the Highlight Text in PDF File

Hi Scripters,
i want know, how to extract the hightlight text in pdf files for text only format for (*.txt) file extension save.
regards
baby

Hi,
Okay i'll try do best.
thanks for your reply.
Regards
Baby

How to extract the content of a mail message?

Friends,,,
How to extract the content of a mail message?
the message does not contain any attachments or images.
its just a plain text..
if i use message.getContent(), in addition of the content it returns headers information also...
but i need only the content of that message...
if i write code like this:
String content = (String) message.getContent();
it gives cast exception...
if the message contains only plain text, no multipart, then which method is useful to extract only the content?
please tell me friends..
thanks in advannce,
regards,
Venkata Naveen

Message.getContent() does not return headers for a simple text/plain
message. If you're getting headers, something else is wrong.
Also, casting the result to String should work.
Most likely the message really isn't a simple text/plain message.
Provide more details and we'll help you figure out what you're
doing wrong.
Also, please read the msgshow.java demo program included with JavaMail.

How to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

how to extract the audio of a zip file? if it helps I'm trying to add this album zip to my library

Let's say you have a zipped audio collection (audio.zip) containing mp3 files. And you are at a Terminal prompt.
List the files in the zip archive
unzip -l audio.zip (that is ell)
Extract all mp3 audio files into a new home directory folder called mymusic
unzip -d ~/mymusic audio.zip \*.mp3
Variations of the above will depend the zip contents, and internal structure. If the zipped audio collection was gzipped, or someone used rar on it, then the extraction process will be different.

How to extract the senders IP address of an email?

How to extract the senders IP adress of an email using applescript ??

Maybe this will help.
Extract email addresses from email header - Sender (From) - Mail

How to extract the signal out from the waveform by my designated power level?

Dear all,
How can I extract the signal from the waveform accroding to the power level? I read the Trigger&Gate.vi, but this vi extract signal according to the duration time. I want to extract signal according to power level.
As shown in the following figures, the signal I want to process is between 130000 to 140000, if I zoom in, I can see the the useful signal is between 135400 to 138200. The question is how to extract the signal in the zone?
I tried the sub_NoiseEst_And_Chop_Shell.vi in the Packet_based_link example too, but this subvi seemed to be a little slow. Can anybody give me better advice? Thanks in advance!
Solved!
Go to Solution.

I was working on something similar but haven't had time to fully develop it.
My idea was to use an envelope detector (low pass filter) and then use an energy detection VI on the envelope.
Here's where I left off
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
test.vi ‏331 KB

How to extract the date value of IBOR date="12/12/2009"

I have the following query, but do not get the date value out:
WITH ibors AS (
SELECT xmltype('<?xml version="1.0" encoding="utf-8"?>
<IBOR date="12/12/2009">
<LIBOR currency="USD">
<OneYear>1.38875</OneYear>
</LIBOR>
</IBOR>
') ibor_xml
FROM dual
SELECT i.ibor_date, i.ibor_oneyear
FROM ibors,
XMLTABLE(
'//IBOR'
PASSING ibors.ibor_xml
COLUMNS ibor_date VARCHAR2(20) PATH '/IBOR/date',
ibor_oneyear VARCHAR2(20) PATH '/IBOR/LIBOR/OneYear'
) i;
How to extract the date value of <IBOR date="12/12/2009">?

Hi,
The date is an attribute of element IBOR. So you must use "@date" in the xpath expression :
WITH ibors AS (
SELECT xmltype('<?xml version="1.0" encoding="utf-8"?>
<IBOR date="12/12/2009">
<LIBOR currency="USD">
<OneYear>1.38875</OneYear>
</LIBOR>
</IBOR>
') ibor_xml
FROM dual
SELECT i.ibor_date, i.ibor_oneyear
FROM ibors,
XMLTABLE(
'//IBOR'
PASSING ibors.ibor_xml
COLUMNS
ibor_date VARCHAR2(20) PATH '/IBOR/@date',
ibor_oneyear VARCHAR2(20) PATH '/IBOR/LIBOR/OneYear'
) i;

How to extract the Fast Formula Body through database?

Hi All
The Oracle fast formulas are stored in the ff_formulas_f table under the column formula_text having the datatype long. I want to extract the formula text through back end. When I use the statement, Select formula_text from ff_formulas_f, I am getting only the first line.
How to extract the full formula text?
Regards
Rahman

Here's a unix shell script to do it for you based on the info given by the other posters.
#!/bin/sh
if \[ "$1" == "" \]; then
echo Syntax: $0 FAST_FORMULA_NAME
exit 1
fi
ffname=`echo $1|tr \[:lower:\] \[:upper:\]`; export ffname
sqlplus -silent $ORAUSER/$ORAPASSWD <<END
set define off serveroutput on format wrapped linesize 512 pagesize 0 feedback off verify off heading off echo off pause off long 100000
column formula_text format a512;
select formula_text from ff_formulas_f where formula_name = '$ffname';
exit;
END
Also this will list the formula names given a substring:
#!/bin/sh
if \[ "$1" == "" \]; then
echo Syntax: $0 FAST_FORMULA_NAME
exit 1
fi
ffname=`echo $1|tr \[:lower:\] \[:upper:\]`; export ffname
sqlplus -silent $ORAUSER/$ORAPASSWD <<END
set define off serveroutput on format wrapped linesize 512 pagesize 0 feedback off verify off heading off echo off pause off long 5000
select formula_name from ff_formulas_f where formula_name like '%$ffname%';
exit;
END

How to extract the smtp response code

Hi,
I am trying to get the server response by SMTPTransport.getLastServerResponse(),
and getting the response as "250 2.0.0 OK 1201842889 c39sm4983397anc.25", in case of success.
This response would differ in case of failure.
Could please guide me as how to extract the response code from the result.
Thanks!!

It's time to read the SMTP spec.
Also, read the javadocs for the com.sun.mail.smtp
package to see how to get an Exception even for
success that includes the detailed response codes.
The smtpsend.java demo program will show you how
to interpret the exception.

How to extract the xcontrol output

I created one xcontrol for pressure sensors . I am able to display the output correctly but i could not able to use the output for other inputs .
how to extract the xcontrol output
for clear understanding please see the attached vi testing .
Attachments:
testing.vi ‏9 KB
Pressure sensors.zip ‏96 KB
testing.vi ‏9 KB

I always measure velocity in furlongs per fortnight
Units are very powerful, and like any great magic, can result in serious unintended circumstances.
I've tried them a couple of times and decided they were more difficult to use than the value provided. Maybe it's better now, but I'm still on LV 8.6
http://forums.ni.com/t5/LabVIEW/Why-do-very-few-programmers-use-LabVIEW-unit-labels/td-p/1119746
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How to extract the TCP Parameters?

Similar Messages

Maybe you are looking for