How to extract WAD reports

Hi,
Could you please show me the steps involved for extraction of  WAD reports...
Thanks
Bye...

HI,
For you requirement you dont need to go for WAD.
from query to direct update DSO, you can load data through APD(RSANWB).
If it is necessary to load data from WAD, Please update, we will discuss.
Regards,
Ranganath.

Similar Messages

  • How to start WAD report from MSS with Hierarchy ?

    Hello to all.
    I have a WAD Report that the parameters for it are: Org  unit - as the root, and a year/month.
    The report receive an org unit and display data for it and for all org units under it in the Org. structure.
    I start the report from the MSS.
    In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
    The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
    What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
    Thanks, Pazit Atar.

    I am also facing same problem.
    I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
    PLEASE HELP.

  • How to extract the Report in CSV fromat from Fusion BI Publisher

    The Bi Publisher's viewer doesn't provide the option to export the report in CSV format. How to do that?
    I need to schedule the report and email the report in csv format.
    Please suggest a solution

    Hi,
    1. Login in BIP;
    2. Edit your report;
    3. Choose View List (On the right side, next to View Thumbnails);
    4. Choose from Output Format LOV - Data CSV and uncheck the other formats.
    5. Save the report and scheduled it again.
    Regards,
    Liviu

  • How to see WAD reports on browser

    Hi experts,
    We created some reports on BEx. Now we want to show them in browser.
    For this i went into WAD and gave one report as input.
    An URL is generated.  I copied that URL and pasted in the Address bar of internet explorer.
    It is giving an error as follows:
    =========================================
    Service cannot be reached
    What has happened?
    URL http://ocbomsap04:8014/sap/bw/BEx call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system BP1 with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:ocbomsap04_BP1_14-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team
    =================================================================
    This is the first time we are using to publish a report on browser. What the settings do we need to do to see the reports on browser ?
    Plz provide some step by step..
    Regards,
    Nishuv.

    Hi,
    Go to All programs and select your web application designer
    Select the button to create a new page in WAD
    Select the chart and place in the layout
    Next goto Data provider Target and select your query
    Give your report name in the given data provider screen
    Select your query in History/find/Favourites/Infoareas button
    Select your query in this screen and click OPEN
    Now we can see the data provider is assigned to the chart.
    To edit the chart you have to right click on the chart
    After right click on it we will find another screen where we can edit all the settings
    In this screen we can find NEXT click button to change our settings
    In this screen we can state the tasks (Title, units, values, range)
    In this screen we can change our background /validity/color
    In this screen we can add values to the chart
    In this screen we can add validity/positions/order/axis types to the chart
    In this screen we can change the global settings/and overview of the chart.
    This screen shows that we have customized the chart successfully
    After successful creation of the chart we have to save the chart
    Save your chart in your favorites by giving the description and technical name in the given block.
    Now execute your WAD by selecting the execute button
    This is the design what will be given as your out put
    Please save your LINK.
    http://epsys:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=PRICETRENDTEST&DUMMY=0
    Now your WAD is successfully designed.
    Check this link what I have done in last month.May be this link will definitely helpful.
    Thanks==points
    Regards
    Sudheer
    Edited by: SUDHEER on Dec 19, 2008 7:28 AM
    Edited by: SUDHEER on Dec 19, 2008 7:33 AM

  • How to extract 911 report from Call Manager

    Hi, It has been requested I provide a report showing only 911's and where they are originating. Does Call Manager have a utility I can use to extract this data?
    Thanks to all in advance, it is greatly appreciated.

    Hi Ross,
    This is the only method that I know of to do this type of search (in CCM);
    Using SQL Queries to Search the Call Detail Record with Cisco CallManager
    Search for Calls Made to a Specific Number
    In some situations, you might need to find out the extension which called 911 on a specific date. Complete these steps in order to search for calls made to a specific number such as 911.
    In order to search for calls that are made to a specific number, you can run a different query.
    For example, if you want to look for calls to 911 you can enter the query select * from CallDetailRecord where finalcalledpartynumber='911'.
    The bottom of the page displays all the entries in the CDR that have the final called party number equal to 911.
    Add a date to this query in order to refine it.
    For example, for all calls to 911 after August 1st, 2003, run the query select * from CallDetailRecord where finalcalledpartynumber='911' and datetimeconnect > '1059696000'.
    The bottom of the page displays all the entries in the CDR that have the final called party number equal to 911 made after August 1st, 2003. '1059696000' is the universal time in seconds for August 1st, 2003.
    In order to see who calls 911, run the query select callingpartynumber from CallDetailRecord where finalcalledpartynumber='911'.
    From this doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d71c5.shtml
    Hope this helps!
    Rob
    Please remember to rate helpful posts.....

  • Extract the report into excel file

    how to extract the report into excel file?
    which function module i have to use ?

    Hi Pavan,
    If you want to download the displayed list in the Excel file,then at the time when the list is displayed on the screen, you can go to System option on the menu bar,from there go to List and then Save.You will get a pop up which shows you all the formats of download available.Select the one you want to and mention the target path of the file on the Presentation server.
    Secondly,you can use the T-codes "CG3Y" to download the data from the Application Server to the Presentation Server and T-code "CG3Z" for vice-versa.
    Or else you can use any of the FMs to first download the ABAP list to the ASCII or the BIN format and then convert it to excel using the FM "SAP_CONVERT_TO_XLS_FORMAT" or "TEXT_CONVERT_XLS_TO_SAP
    I hope I have tried to answer your query.
    In case of any further queries,please let know.
    Regards,
    Puneet Jhari.

  • How to extract the column width in ALv report if its executed in background

    I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extract coulmns in back ground.
    I have executed in background and checked the spool and  for some of the columns width is not sufficient to display comeplete data so please suggest how to extract the columns sizes if executed inj background for an ALV

    Hi Deepthi,
    you can try with the above mentioned suggestions ,if its worked its fine ,
    If not use Docking container instead of custom container, For ALV in back ground jobs, its suggest to use docking container instead of custom container , below you can find the declaration for docking container and code to use docking and custom container in your program for fore and back ground.
    or you can use docking container alone for both operations.
    Data : G_DOCK1 TYPE REF TO CL_GUI_DOCKING_CONTAINER,
    IF CCON IS INITIAL. (ccon is container name )
    *Check whether the program is run in batch or foreground
        IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
    *Run in foreground
          CREATE OBJECT CCON
            EXPORTING
              CONTAINER_NAME = 'CON1'.
        CREATE OBJECT GRID1
            EXPORTING
              I_PARENT = parent_1.
    ELSE.
    *Run in background
          CREATE OBJECT GRID1
            EXPORTING
              I_PARENT = G_DOCK1.
        ENDIF.
      ENDIF.
    B&R,
    Saravana.S

  • How to keep the input parameters in a query (WAD report)

    In some WAD reports, we have to record the report name and the user name (which user use the report) and what the selection criteria the user input. How can we do?
    Thank you
    Michelle Lee

    Hi.
    Report name: create user exit variable (lets say Z_QUERY_NAME) with following code at I_STEP=2
    WHEN 'Z_QUERY_NAME'.
    DATA lv_compid    TYPE rszcompid.
    CLEAR lv_compid.
    IMPORT compid = lv_compid FROM MEMORY ID 'COMPID'.
    l_s_range-low  = lv_compid .
    l_s_range-sign = 'I'.
    l_s_range-opt  = 'EQ'.
    APPEND l_s_range TO e_t_range.
    User name: crate user exit variable (lets say Z_USER) with following code at I_STEP=2
    WHEN 'Z_USER'.
    CLEAR l_s_range.
    l_s_range-low  = sy-uname.
    l_s_range-sign = 'I'.
    l_s_range-opt  = 'EQ'.
    APPEND l_s_range TO e_t_range.
    Then in WAD create 2 InfoField webitems. Set dataprovider and select variables for info fields.
    Regards.

  • How to extract latest instance of a report using BO Enterprise SDK?

    Using BO Enterprise SDK how to extract latest instance of report from Crystal Enterprise XIR2?. Can anybody help me with explanation or code?
    Thanks in advance.

    Hi,
    Use the following query in the query builder
    SELECT
    SI_NAME, SI_SCHEDULEINFO.SI_STARTTIME
    FROM
    CI_INFOOBJECTS
    WHERE
    SI_RECURRING = 1
    SI_NAME: The recurring report name.
    SI_SCHEDULEINFO.SI_STARTTIME:  The date and time the report is scheduled to run next.
    The query above will return all the recurring reports .
    Regards,
    Prithvi
    Edited by: Raj_10 on Sep 14, 2011 1:54 PM

  • How to force selection screen in WAD Report

    Hi Gurus,
    How do we force a variable selection screen in WAD Report. We are in SP 10.
    Thanks
    Syed

    Hi Karthik,
    Iam not sure for some reason, when I select web_template and click on Web Parameters, there nothing available below Behaviour section. However when I create a new Analysis Item and see its properties, the Behaviour section shows only Allow Navigation & Only Hierarchy options.
    Should I reinstall my front end. We are in SP10.
    Appreciate your response.

  • How to  extract  data from PCD tables to create  custom activity report

    Hi Friends
    I have a requiremnt for creating custom portal activity report, even though we have
    standard report for that, we need to extract the data from the following pcd tables
    WCR_USERSTAT, WCR_WEBCONTENTSTAT,WCR_USERFIRSTLOGON,
    WCR_USERPAGEUSAGE.
    This extraced data will be used to create BW Reports.
    my questions  are
    1.How to extract the  data from   pcd tables?
    2.can i use   UME API   for  extracting the  data from the given PCD tables?
    3.Can i querry   the  PCD tables from JSPdynpage or  Webdynpro APP?
    Please guide me.
    Thanks in advance
    Ashok

    Hi Kishore,
    Refer to
    http://wiki.sdn.sap.com/wiki/display/Snippets/DirectAccesstoDatabaseTables
    http://wiki.sdn.sap.com/wiki/display/WDJava/OracleConnectivitywithEJBusingWebDynproApplication
    JDBC Connectivity with Webdynpro and Max DB
    Thanks
    Prashant

  • How to Extract data and reports from the SAP BW warehouse

    Hi to All Guru's
    I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools.  After Extracting the data from SAP BW how can we move all the data to Cognos.  It would be kind enough to provide me with any documentation or links.  Step by step procedure would be very much helpfull to me.
    Thanks
    Venu

    Hi Voodi
    Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos.  Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this.  Thanks for your concern.
    Venu

  • WAd Report - How to change Cursor Type...

    Hi,
    In BI WAD report output, the cursor type is Pointer (Hand sign). I wanted to change it to some other type, is this possible, If yes, could u pls let how can i do that. I tried a lot but didn't suceed.
    Thanks...

    I think this would be possible by having custom CSS embedded in web template. E.g. see here:
    http://www.zimmertech.com/tutorials/css/20/changing-cursors-tutorial.php

  • WAD report - How to navigate to first page?

    Good day,
    When i run my WAD report, have the pages navigation.
    When i click to LAST page and then click button "Change variables", a get my report with new data by another key, but it display it's LAST page too!
    How can i changed variables and get the report with NEW data starting with FIRST page.
    I have found BI_COMMAND "NAVIGATE_ROW_PAGE_START", but there is unavailable in command constructor.
    Regards and waiting for answer.
    Thank you!

    I think this would be possible by having custom CSS embedded in web template. E.g. see here:
    http://www.zimmertech.com/tutorials/css/20/changing-cursors-tutorial.php

  • How to extract all the list of reports names available in the WEBI public?

    can anyone please help me how  to extract all the list of reports names which are available in the WEBI Public folder?
    I ran the VB macro downloaded from net but that is extracting all crystal,deski & webi reports..
    but i want only webi list of reports..
    Please help me to achieve this?
    Thanks
    Radha

    Is this about Business Objects WEBI? You might want to post in the BOBJ forums instead.[BOBJ Forums|/community [original link is broken];

Maybe you are looking for