How to factory default cisco MDS 9222i

How to factory default cisco MDS 9222i

Hi,
write erase
write erase boot
reload
(If prompted to save run to start, say no)
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/bb.html#wp1087208
Regards,
David

Similar Messages

  • Interconnecting CIsco MDS 9222i to the HP C-Blade enclosute VC-FC Virtual connect module

    Hi,
    Anyone had the experience of interconnecting the CIsco MDS 9222i to an HP Blade system through the VC-FC virtual connect module?
    When i connect my MDS switch to the module, the VC-FC ports dont log in to the MDS. Could i be missing out on something? I have configured the MDS to use the default VSAN 1 and tried configuring the ports as F-ports but nothing worked, even with the port mode put on auto they still take on the F-port role and still the VC-FC module doesnt log in.
    Your help and support will be appreciated
    jerrysimila

    i wanna use the CLI though i also have the fabric manager at my disposal. would you kindly
    share a sanitised version of ur running config for the mds that does the FCIP replication to the DR i see if i can make head out of it then i
    f i face any challenge will holla at u. you can email me [email protected]
    My set up is as follows, ive got 2 MDS 9222i at the primary site in active-standby mode, one connects to the active VC while the other connects to the standby VC of the blade system. Then i have a similar set up for the DR. Good thing is that am first setting everything up here in my Data Centre, then test before sending the configured equipment to the DR. So i have much freedom to get dirty with the equipment, and its not a live environment yet.
    Kindly let me know the step-by-step procedure of having the FCIP set up.

  • Cisco MDS 9222i 10G Module DS-X9704 supports FCoE

    Hi, Whether Cisco MDS 9222i 10G Module  DS-X9704 supports FCoE? i saw IP over FC in the data sheet of this module but not FCoE?
    Thanks
    Abhilash

    Also whether this 10 G interface can work as an Ethernet port and not just a FiberChannel port?

  • How to factory default reset gen 3 with fast flashing led

    After the holiday power outages here in NH, I find my Apple TV (3rd gen) with a fast blinking LED. Tried to connect via USB directly to my Mac Mini with Yosemite 10.10.1 and nothing...
    iTunes does not show the device. Tried several USB cables.
    Any suggestions?

    Did you make sure to follow the steps exactly (disconnect all cables, connect micro usb, reconnect power)?
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support
    Make sure you are connecting directly to computer, not a keyboard port or USB hub
    If using a cable that came bundled with another device it may not have the capacity to transfer data (only charge) or only be designed to work with that device.

  • Cisco MDS 9222i san switch

    need to know the license means which has been shown "Evaluation mode" in attached snap shot at Fabric Manager and its remedy.

    any update on this

  • How do you factory default the MSE 3350 Mobility Solution Engine

    Hi Guys
    I was wondering if anyone knows how to factory default the MSE or know of a way to enable the setup wizard again.
    Is there a way to check the status or change the WCS communication password manually.
    Thanks in advanced

    You can use following steps to restore factory default fo MSE:
    Step 1 In Cisco WCS, click Mobility > Mobility Service Engines.
    Step 2 Click the name of the mobility services engine you want to configure.
    Step 3 Click System (left panel).
    Step 4 Click Advanced Parameters.
    Step 5 In the Advanced Commands section (right), click Clear Configuration.
    Step 6Click OK to clear the mobility services engine configurations.

  • How to reset a ISE device to factory default?

    Hello guys,
    I just started learn Cisco ISE (TrustSec 2.0), i have my company device which that set on pre-configured configuration from my company meant configured database password.
    So i want to ask that how can i reset ise device to factory default configuration.
    Plz give me answer as well as possible, thanks in advance.

    Sure...
    application reset-config Resets the Cisco ISE configuration to factory defaults.
    Sent from Cisco Technical Support iPhone App

  • How to set ASDM image on ASA remain factory-default

    Hi, Cisco Support Community
    I want to configure an ASA to facotry-default using the following commands.
    # configure factory-default
    # wr mem
    But when I use above commands, ASDM is to be unset !
    How can I set ASDM remain factory-default ? I don't want to include " #asdm image disk0:/~~.bin" command in configuration because it is not factory-default configuration.
    I don't know why I can do that on ASDM.
    First , Upgrade ASA&ASDM on ASDM.
    Second Operae factory-default and reboot on ASDM.
    Then ASA is to be factory-default and set ASDM image.
    I want to do that with CLI.
    Thanks in advance. 

    Thank you for reply.
    Of course I put ASDM image on ASA.
    You know we can launch ASDM on truly factory-default ASA.
    I mean how I can reset ASA to that condition using CLI.
    a problem is below.
    1. put ASDM image on asa flash
    2. (configure)#asdm image disk0:~~
    3.#show asdm image
    >> the image is set
    4 (config)#configure factory-default
    5.#show asdm image
    >> unset
    How can I truly reset to factory-default ?

  • How do I reset an iPad 2 to factory defaults when I can't recall the Restriction passcode?

    I have tried all of the suggested reset methods and still cannot reset to factory defaults. Somehow I setup a restrictions passcode that I can't find or remember so I seem to bee stuck.
    Does anyone have a solution?

    The only option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • Satellite L300-20D - Reset to factory default - How?

    Hi,
    My Laptop is Kind Of Messed Up At The Minute And I Am Looking To Reset To Factory Defaults.
    Can Anyone Tell Me How To Do This?
    Thanks.

    Hey,
    The exact procedure for HDD recovery is described here:
    http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
    But therefore the original OS from Toshiba (Vista) must be installed. If you have installed another OS you have to use the Toshiba recovery disk that you created.
    The installation from Toshiba recovery disk you can start if you boot from CD/DVD drive. Then follow the screen instructions to install Windows.
    Its very easy because all drivers and tools will be installed automatically.
    Please send some feedback if it worked or not. ;)

  • How do I set an ICIM in a Prisma 2 chassis back to a factory default?

    How do I set an ICIM in a Prisma 2 chassis back to a factory default?

    You need to read the documentation carefully:
    The Deploy Agents install package is created using a Configure Automatic Account Creation wizard. The wizard copies agent settings from an existing machine ID or machine ID template and generates an install package called
    KcsSetup.All settings and pending agent procedures from the machine ID you copy from—except the machine ID, group ID, and organization ID—are applied to every new machine ID created with the package.
    Including Credentials in Agent Install Packages
    If necessary, an agent install package can be created that includes an administrator
    credentialto access a customer network. Credentials are only necessary if users are installing
    packages on machines and do not have administrator access to their network. The administrator credential is encrypted, never available in clear text form, and bound to the install package.
    ¯\_(ツ)_/¯

  • How do you Reset iPad to factory defaults

    How do you reset an iPad to factory defaults?

    Go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • How to create recovery disc that have factory default in H320?

    Hi I just bought a ideacentre H320. I want to prepare recovery discs, but when I do so, I am only given the option to backup the "current system". I did not see option in such as "Factory Default Recovery Disc" as I see in OneKey Recovery 7.0 (Mine only come with something similar called "Lenovo Rescue System 3.0".
    But I don't want to back up the current system, I want to get the recovery disc to have factory image, so when I restore, it will be like I just open the the new pc from the box. How can I do that? (I know you can achieve the same thing through the "Service partition" but what if the harddisk is corrupted and you lost the partition?)
    Is there any way to backup the service partition, so when I do something like upgrade Hard drive, I will not loose the ability to return my pc to factory default? Thanks.

    Hi fongpwf and welcome to the community,
    In figure 14, it says "Create a bootable recovery disc from system backup or factory default image file."
    Are you saying that if you click the button to create the recovery discs that it only gives you the option of creating it from the system backup?
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How do I reset my Windows 10 computer to factory defaults?

    QuestionHow do I reset my Windows 10 computer to factory defaults?
    AnswerNote: This article describes resetting a Windows 10 computer to factory defaults. You can read separate articles on performing something similar in Windows 8 or Windows 7.
    A system reset will remove your installed applications and rebuild the Windows 10 system files.
    You can choose whether you want to keep your files or remove everything.
    If you choose to keep your files, your applications will be removed, system settings will be reset, and Windows files will be rebuilt. Your data and documents will remain intact on your computer.
    If you choose to remove everything, your data and documents will also be removed.
    To learn what other recovery options are available to you in Windows 10, read the following article:
    What recovery options are available in Windows 10?
    To perform a reset, follow these steps:
    Open the Start Menu and select Settings.
    Select Update & security and then Recovery.
    Under Reset this PC, select Get started.
    Choose either Keep my files or Remove everything. If you choose to remove everything, you might be given the choice of resetting all drives and partitions or resetting only the one on which Windows is installed. Choose the option you prefer. Not everyone will see this selection.
    You might also see additional options depending on whether Windows 10 came pre-installed on your computer or if you upgraded to Windows 10. Choose the options you prefer and follow the prompts to complete the reset.
    You can also watch this video explaining how to do this:

    Hi there,
    A full factory reset may not be required. Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do I reset a MacBook Pro w/retina display to factory defaults?

    We just got a MacBook Pro for my daughter and she used the migration assistant for bringning things to it.  If she wants to start over how do I reset the machine to it's factory defaults?

    Boot into the Recovery Partition:
    - Power on.
    - When you hear the chime, hold down the Command and R keys simultaneously.
    Run Disk Utility.
    - Select the internal drive (upper left disk icon).
    - Erase tab.
    - Format: Mac OS Extended Journaled.
    - Name: Macintosh HD.
    - Erase…
    Quit Disk Utility.
    Run Reinstall Install OS X and follow the directions.

Maybe you are looking for