How to fax in your own area code

When I select a contact within my area code, it should know to drop it so it would only dial the local 7 numbers.
i.e.: instead of 318-555-5555 in the 318 area code,
it should dial 555-5555
But it doesn't. Where is the setting that changes this for local calls, but also applies the area code and the 1 for long distance calls??

I agree completely - and I let them know that. Since my iMac isn't going anywhere, the "work around" applies, however if I used a mac on the road, it would not apply.
Hopefully they will address this in Leopard!

Similar Messages

  • How can i create my own t-code

    hi ,
    how can i create my own t-code with a specified applications? may i know the t-code for create a t-code
    Edited by: amarnath popuri on Nov 24, 2008 10:53 AM

    Hi amarnath popuri
    Use t-code SE93 to create a t-code.
    Check below link.
    http://help.sap.com/erp2005_ehp_02/helpdata/EN/43/2c43b427bf601fe10000000a422035/frameset.htm
    Regards
    Ashok

  • How do u out your own video files on the ipad?

    How do u put your own video files on the ipad and once u have done it where do u look to find it to play

    You load them into iTunes and then sync them to your iPad. You'll then find them in the Video app. For detailed information, consult the iPad User Guide; the sections on Synching and Videos will be most applicable. Then if you have specific questions, post back and we can help further.
    Regards.

  • How can you add your own print and export buttons to the CR viewer toolbar?

    I posted a previous question that was asking how to get around the Information Bar in IE7 when you export and print.  Unfortunately the CR viewer file download code gets blocked by IE7 because the buttons don't directly download the file.  However, I have been able to get a regular button that calls the following code and streams the file to the client and IE7 does not block it. 
    Sub PrintPDF(sender As Object, e As System.EventArgs)
         Dim crReportDocument as ReportDocument
         Dim crExportOptions as ExportOptions
         Dim crDiskFileDestinationOptions as DiskFileDestinationOptions
         Dim Fname as string
         CrReportDocument = New ReportDocument()
         CrReportDocument.Load(Server.MapPath("estactionlist.rpt"))
         Fname = Server.MapPath("./") & Session.SessionID.ToString & ".pdf"
         CrDiskFileDestinationOptions = New DiskFileDestinationOptions()
         CrDiskFileDestinationOptions.DiskFileName = FName
         CrExportOptions = crReportDocument.ExportOptions
         With crExportOptions
              .DestinationOptions = CrDiskFileDestinationOptions
              .ExportDestinationType = ExportDestinationType.DiskFile
              .ExportFormatType = ExportFormatType.PortableDocFormat
         End With
         CrReportDocument.Export()
         Response.ClearContent()
         Response.ClearHeaders()
                    Response.AddHeader("content-disposition", "attachment;filename=test.pdf")
                    Response.ContentType = "application/pdf"
                    Response.Charset = ""
                    Response.WriteFile(Fname)
                    Response.Flush()
         Response.Close()
         System.IO.File.Delete(Fname)
    End Sub
    So here are my questions?
    1. Is it possible to add a custom print control/icon to the CR viewer toolbar?
    2. If one is not possible, then is it possible to override the CR viewer print and export buttons with your own subroutines like the one above?
    I just want my page to look nice and hate to have print and export buttons outside of my CR viewer. 
    Thanks,
    Kevin

    It might be possible to replace the buttons in a windows app since you can retrieve the toolbar as a toolbar object in the winform viewer  ( ToolStrip toolBar = (ToolStrip) crystalReportViewer1.Controls[3]; )  however with a web app, it's a lot more difficult.
    The problem is that that you need to parse the Request string to try and figure out if the print / export button was clicked.  The code below makes the print button disappear if you click it, so you should be able to modify it to call your custom printing / exporting code instead  (You have to do this check in a postback)
            Dim I As Integer = 0
            If Request.Form.AllKeys.Length > 0 Then
                For I = 0 To Request.Form.AllKeys.Length - 1
                    Response.Write(Request.Form.Keys(I).ToString & "<BR>")
                    If Request.Form.Keys(I).ToString = "CrystalReportViewer2:_ctl2:_ctl2.x" Then
                        CrystalReportViewer2.HasPrintButton = False
                    End If
                Next
           End If
    Shawn

  • How to refund and change an area code

    Dear Sir, I have signed up to an online number 2 days ago however I now discover I need to change it to another area code in the UK. I can see from other threads that you need to cancel the old number and set up a new one. How do you do this ? And what do these numbers cost per month ? I have unlimited Europe subscription and have 2 online numbers.

    There is one requirement in which we have to add some condition in the Concurrent Program.But the Type of that concurrent Program is ,"Spawned ".
    Please suggest me , how can i check the Source code for this type of Concurrent Program and how can i make the changes to satisfy the requirement.Please see old threads, it should answer your question -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Spawned+AND+Concurrent+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Put your own HTML Codes?

    Is there a way to view the html code, and then place your own code in it just like you would with dreamweaver?

    Here's what I found. Some people might find it useful.
    I wanted to include some php code in a page.
    1 Include a text box in the page design which will display the result of your code. Put some marker in the box which will be easy to find like "php-code-goes-here".
    2 Publish the site to a folder.
    3 open your html editor, I recommend bbedit.
    4 open the file for the page and search for the marker you inserted. Replace the marker with your php code.
    5 save the file, remembering to rename it with a .php extension
    6 search all the other files in that site folder for references to the original .html file and change these references to the new .php file.
    7 upload the site folder to your server. you can delete the original html file if you like.
    8 bask in the glow that comes when your app works and smile.
    I guess this will work with java script and other code as well. I don't have a .mac account so I don't know if this works or even if .mac is enabled for php.
    G4 dual 1.42   Mac OS X (10.4.4)   ibook G4

  • How do you create your own theme?

    I'm into astronomy and I'd like to create my own theme on my phone (6300) for when I'm at a dark site.  We use red light only at dark sites because white light ruins your night vision for longer.  How can I create a red-based colour theme/wallpaper/text etc?

    Actually, the .nth files used as themes for S40 phones such as the 6300 are very simple and you don't really need any software other than a text editor to create them.
    These .nth files are in fact renamed .zip files. Rename one back to a .zip file, unzip it and look at the structure. At the core of it you have a simple XML file describing the various aspects of the theme. If any media (wallpaper, screensaver, ringtone etc.) is referred to in the XML file it'll be bundled in the archive along with the XML.
    Make any changes you want, zip the lot up again, rename it as a .nth file and you're done.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How do you set your own ringtones on an iPhone 6?

    I used to own an iPhone 4s and I had no problem making ringtones and transferring them to be used on the phone. However I just cant seem to work out how to get them to show up on my new iPhone 6 when choosing ringtones I have made.
    I have renamed them so they are in m4r format and they show up under "tones" in itunes under my phones dropdown but when I go to find them in the sounds menu on my phone after disconnecting it with my computer they are nowhere to be found.
    This is really starting to **** me off. Why can't they make this easier for users of an iPhone? Seems crazy that they haven't made this easier to do after 6+ versions of the their phone.

    My custom Ringtones that I have used on my earlier iPhones do show up on iPhone 6.  They are under Settings>Sounds>Ringtones ...My Custom Ringtones are the first choices showing and they have a line under the group of customer ringtones and then below the line are the standard Ringtones.  I did nothing special in iTunes when I Restored from Backup to put my personal Media and Data on my new iPhone 6.

  • How can you make your OWN text slides on imovie

    What i mean by this is, is there any other way to make text slides in imovie other than the options they already give you? I want to make my own, i'm not a fan of the ones they give

    You can use Keynote and then use in imovie.
    The trick is to Share from Keynote as a QuickTime movie. Use Timed Advance, not Manual Advance.
    If you are using Green Screen, make a gradient background of two similar shades of green.
    Here is a "green screen" example.
    Here is a Picture in Picture example

  • HT4972 How do you save your photos, Are they saved in the back up?

    So you know how when you plug in your apple device the tab for saving your pictures in a
    certain folder comes up,
    Well that thing doesnt show up and I dont know how else to save my photos. When you
    back up your device on itunes does all my photos in my ipod get saved in there.

    - Photos in the iPod's Camera Roll/Saved Photos album is included in the backup that iTunes and iCloud makes.
    - When you import photos to your computer
    iOS: Importing personal photos and videos from iOS devices to your computer
    they go to where the program you use tells them to go.

  • How do you get your own videos or movies in iPod 5th Gen

    Is it not possible to put our own movies into an iPod? I own my movies, just as I own my music...but I can't figure out how to get any of my movies into my iPod. Or do you have to buy all movies thru iTunes in order to play them on the iPod...???
    I would appreciate any advice on this subject - Thank you!!

    Look here for some different programs that will help you convert home movies to iPod compatible.
    http://www.versiontracker.com/windows/ipod-itunes/video

  • How do you create your own short on the homescreen to email account?

    I've posted several threads and questions on here, mostly because I am looking at moving from a Blackberry to an iPhone.
    Friends have said managing multiple email accounts is easier on the iP than BB.  I fail to see how.  But here's how it might work, and I am asking if this is possible:
    Rather than just having the green 'Mail' app icon in the lower homescreen bar, can you create shortcuts directly to email accounts on the phone that show many if any of them have new emails, and link DIRECTLY to those accounts in the Mail app?
    So for example, on the 8520 (and all the others), you get an email in and see a red mark by that account's icon.  OR... you just want to check on an email in that account, you can just click that "hotmail" icon and you are straight in from the homescreen.
    On the iPhone, you seem to have to click Mail, then Account.
    Can you add a shortcut straight into each separate account?
    I'm told you "must be able to", but not yet found out if it really is possible.  Same goes for What's App - can you get the Whats App icon straight there on the homescreen, AND the MSN icon there too?  Rather than going into messages then into those apps.

    You can move any app to any location...
    Tap and hold any app until it wiggles.
    Move any app to the desired location, including folders.
    Press the Home button when done.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    http://www.apple.com/support/iphone/#basics.introduction
    Note that the double-click home allows you to switch betwee apps without going to the homescreen, i.e. you can do this from within an app.

  • How Do you Make your Own Font so you Can Use It in Preview

    Hi. I'm filling up a form that needs my signature. I can't annotate my signature (because it doesn't annotate graphics) in a PDF using Preview. I plan to just create a font of my signature so I can annotate my signature as text ( I just key in letter A and my whole signature would be that key). Thanks in advance.
    Gbu.

    http://www.yourfonts.com/

  • Make your own Fax Server with Automator! (Pagesender solution for Mavericks)

    I have been scouring these discussion boards for some time now looking for a suitable substitute to PageSender, an awesome fax solution for the Mac from SmileOnMyMac LLC, which for some inexplicable reason stopped development and updates after OS 10.6.8. The result is that many small business office users who still rely on fax (and yes...no matter what they tell you, most of the business world DOES still use fax because it's legally binding and more secure than email for the transmission of legal documents or healthcare records, and does not rely on database integration accross different systems, which is sadly but very realistically still a long ways off), and no longer have a way to integrate faxes into a paperless or digital workflow office system.
    I suspect like many folks who receive faxes, those who used PageSender, used a very powerful feature to forward faxes by email, thereby turning your Mac into a Fax server that could distribute your faxes to other workstations and staff throughout the business via email. Presumably, if you have your own email server (Exchange, Kerio, AppleMail server, PostFix enabler etc.) you could distribute faxes on your own internal network, securely behind a firewall, and effectively create a digitial/paperless workflow for your faxes.
    Even if you have a USB modem or multifunction printer that allows you to recieve a Fax to your desktop (Apple's internal fax via printer preferences, and some HP models like the HP MFP 127fw) for example will allow you to recieve a Fax to a desktop folder or forward to a single email address. But the former is of limited functionaliy and the later only lets you send to an email address out over the internet with a registered public domain, which means you give up all control of privacy and means you can't process it through a private mail server to create a digital workflow for your office...
    ...Until now!!!
    I am happy to report that I have finally discovered a very easy and useable feature that will save a lot of time, money, and headaches for those looking to create a digital workflow and fax server system for a small office system. (I don't think there is any limit to scale here, but I suspect offices with more than 10 employees probably have a BizHub, or HP MFP/digital sender that can create the same process directly from the printer, but of course these come with a price tag of $2000 and up...).
    To accomplish this however, you will need some basic requirements which are as follows:
    1) A USB modem from either US Robotics or Zoom Modem. These are readily available from Amazon, MacMall or any number of other online vendors and work very well and seemlessly with all Macs running OSX right up through Mavericks
    OR
    A Multifunction printer that is capable of receiving faxes to a desktop Mac like the HP 127 fw. Other models exist from other manufacturers as well, but you will have to do a bit of research and probably check with the vendor or user manual directly to confirm that Fax to desktop is supported for Mac and OS 10.9.
    2) A dedicated Mail Server (MSFT Exchange, Kerio, MacOSX server with mail server enabled, or PostFix enalber or MailServe from Cutedge Systems)
    You will need to set up an email account on your server that is the parent for all incoming faxes from which the faxes will be sent out as part of your digital workflow. This is beyond the scope of this discussion but if you've come this far and you're still reading, you probably know  how to do this already. I recommend setting this up as a POP account, not IMAP. This way, the attatchments (your faxes) will always remain on your server as a back up, until you delete them from the server.
    3) Now simply go to System preferences and select "Printers and Scanners". Select either the Fax printer for your multifunction printer, or add a fax printer/reviever using the + button and select "Fax" if you are using a USB modem. You must have the USB modem attatched to the computer in order to use the built-in Apple Fax feature for the latter option.
    4) Now click on the receive options. Select "Recieve faxes to this computer" and set your ring answer settings. Check "Save to" and select the designated folder (either Faxes or Shared Faxes on your computer) or create a new folder. Depending on the volume of faxes, and your back up systems, you may want to designate a separate folder on a separate drive, exclusively for your Faxes. This is where all your faxes will be stored.
    5) Now launch "Automator" in your applications folder and create a new workflow. You will be presented with several options. Select "Folder Action".
    6) At the top right of the window space you will see "Folder Action receives files and folders added to" . Select the Fax folder you created in step 4.
    7)On the left hand side of the "Actions" menu select "Mail"
    8) From the list of actions select "New Mail Message" this will take the latest Fax added to your Fax folder and attach it as a PDF to a new outgoing mail. In the "TO" address put the email address that belongs to the parent account your created for the Faxes on your mail server eg. [email protected].  In the subject field you can put "Fax Workflow" or any other generic subject that will identify to all reciptients that this is an email that contains a Fax/PDF attatchment.
    Under "account" use the SMTP account you set up on your mail server to handle the routing of internal emails. In most cases, this will be the same as the parent account created above. (Effectively, this account is sending and receiving emails to itself).
    9) From the list of actions, select "Send outgoing messages".
    10) Save the Automator workflow with a name like "FaxDistribution" or "FaxFlow".
    11) Go back to the Fax folder you created in step 4. Right click or option click on the folder and scroll down the options menu and select "Folder Actions Setup". You will see a list of scripts including the Automator workflow you just created. Choose it.
    That's it!! From now on, when you get a fax, it will get dumped into the designated fax folder, and this will automatically trigger the workflow to atttach and send it as an email to anyone in your office that is set up to receive emails with the "faxserver" address. You now have a paperless fax digital workflow server system for distributing your faxes digitally to anyone in your office who needs to review your faxes. Good luck!

    Thank you for this interesting posting.

  • How do transfer your own DVDs to ipad

    How do you transfer your own DVDs to iPad

    presuming you mean home made dvd's, not commercial dvd's....Handbrake is a great program to convert file types. You then sync those via iTunes to your device.
    If it's commercial dvd's, you're on your own because no one here can help you break the encryption on those.

Maybe you are looking for