How to feed a cluster into the mathscript?

Hi all,
I am trying to feed a cluster into the mathscript. I found that if the name of the cluster element does not have any space or special characters, it works pretty well. But it doesn't run if the name of the cluster elements have any special characters. Is it how Mathscript designed? Any workaround here?
Solved!
Go to Solution.

Hey dragondiver,
Hope you're doing well today. This document overviews the intended use and behavior of data types with MathScript.
Passing Data in and out of the MathScript Node (MathScript RT Module)
http://zone.ni.com/reference/en-XX/help/373123C-01/lvtextmathmain/ms_passing_data_lv_mathscript/
So, to answer your question more specifically, the rule for naming of elements within a cluster passed into the Node is,
"You must label individual elements of the cluster. Labels must start with an alphabetic character and can contain only alphanumeric characters and underscores without any spaces."
This should account for the behavior you're seeing with your code!
Tim A.
National Instruments

Similar Messages

How do I feed an envelope into the printer?

Hello,
I have an HP Officejet Pro 8500a Plus. I'm having a heck of a time trying to understand how to feed an envelope into the printer so that it comes out nice and even.
I am putting the envlope into the tray (on top of the paper that's already there) face side down, and when the printer "grabs" the envelope, it brings it in crooked. I don't have this issue with regular paper, but since the printer is only able to grab it from a certain location, it will always pull it in crooked---thus, the printing on the envelope will be crooked as well.
I tried lining up the envelope along both the right and left sides of the tray, but the printer will not accept envelopes this way--it instantly jams. So I end up placing the envelope right smack in the middle, and I hold it there with my hand to sort of "guide" it in as the printer grabs it. But no matter how steady I am in holding it, the grabber is always going to make the envelope go crooked.
There's got to be a better way to do this. What am I missing?
(I'm using an Apple iMac and MacBook Pro, and I'm using a template on Pages. I also have Word, and I can use a Word template--but the result is the same).
Thanks!
This question was solved.
View Solution.

Hi,
The procedure is a bit long, please read this book from page #24:
h10032.www1.hp.com/ctg/Manual/c02668142.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I install memory into the Pavilion 17z-F2 series laptops?

How do I install memory into the Pavilion 17z-F (17z-F200, product L2H13AV) series laptops?
HP appears to have no maintenance guide available for this model series. What's up with that?
Please, do not offer the generic (and out-of-date) Pavilion 17 Notebook PC Maintenance and Service Guide. It does not appear to apply to the 17z-F series. This guide instructs to remove the bottom service panel which I could have figured that out on my own. However, the 17z-F series does not appear to have any removable panels at all. I took an up-close look at the Pavilion 17z-F100. And, it does not have any removable panels on the underside, except for the battery. So, I presume the 17z-F200 to be the same.
I am a computer technician. And, this is the first laptop I have seen without any service panels. I am probably going to have to disassemble the entire outer-shell to install memory (or to replace the hard disk drive once the time comes). But, every laptop I have worked on in the past had its own special array of hidden screws or special tricks for disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

How about this one:
Pavilion 17z Manual
Don't get me started on this. It's one of my pet peeves, too. HP is not the only one doing this. Acer and Toshiba, etc. also are selling "closed" systems now. I hate it. I will absolutely never knowingly buy one but I am spending a lot of time here answering questions just like this. Good luck and let us know how you do. Sounds like you will be fine.
If this is "the Answer" please click "Accept as Solution" to help others find it.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

How many pictures (or how many bytes) are we talking? Now that the pictures are imported one way to cross users is to use a removable drive (although large volumes of files preclude this).
The other is to login as the user where the pictures are, then copy them into the public drop box of the user where you want the picture.
The arrow is showing (in ths example) copy files from the Pictures folder for my user to the guest user accounts public dropbox. When you do this you may have to authenticate and you won't be able to see the results of the copy until you log in as the other user.
All users are in the folder "/Users/"

I am a CC subscriber and trying to update lr5.7 and I am told to got to my CC folder and click on install. The problem is, LR is not in my file. I guess I have been using my original lr that I bought years ago. What now? How do i get lr into the CC file?

I am a CC subscriber and trying to update lr5.7 and I am told to got to my CC folder and click on install. The problem is, LR is not in my file. I guess I have been using my original lr that I bought years ago. What now? How do i get lr into the CC file?

Gary116 please remove and reinstall Lightroom by following the steps listed in CC desktop lists applications as "Up to Date" when not installed. The version of Photoshop Lightroom available through the Creative Cloud Desktop application supports your Creative Cloud Membership.

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)?
HP appears to have no maintenance guide available for this model. What's up with that?
I took a look at the Pavilion 17z-F100 (sent by mistake). It does not have any removable panels on the underside. And, the User Guide for the 17z-F200 indicates that it will be the same (assuming it ever arrives).
I am probably going to have to disassemble the entire outer-shell to install memory (or replace the hard disk drive, once the time comes). But, every laptop I have worked on in the past has had its own special place for hidden screws or special trick to disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

@DLBurkhart ,
Hello and thank you for posting on the HP support forums. Here is a link to the HP Pavilion 17 notebook Maintenance and service guide.
HP Pavilion 17 Notebook PC Maintenance and Service Guide
In the guide you will find the instructions on how to access the memory module and as well you should find the supported memory configurations.
I hope this was helpful.
Thank you for posting and have a great day
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

How to add an item into the Newsstand

How to add an item into the Newsstand. Please do NOT reply using "tech-language." Use standard- normal everyday English. Thanks,
Don Otlin
Franklin Square, NY

Open Newsstand. Tap on the "Store" button in the upper right. Any newspaper or magazine you download from the store will appear in Newsstand.

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

How to include a report into the SAP-SCRIPT

plz tell me
How to include a report into the SAP-SCRIPT
ASAP

creat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*&      Form get_data1
      text
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data1 TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*&      Form get_data
      This form is to read details from LIKP    *
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
   READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM.                    "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

How to publish my ebook into the ibook store directly is there a link?

How to publish my ebook into the ibook store directly, is there a link?

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/apply

How do I get back into the US iBookstore?

How do I get back into the US iBookstore? I looked up a book title by a British author and ended up in the UK iBookstore. The book was priced in £, I tried to buy it, then a message appeared that I had to go to the US iBookstore, but no directions or way to get back there. I've tried everything. Help!

1. Go to Settings > iTunes & App Stores > Apple ID.
2. Tap your Apple ID
3. Tap View Apple ID
4. Enter your password
5. Go to Country/Region in the popup window to change to the desired store.

My ipod is locked, but there is no unlock button, how do i get back into the ipod

the ipod is locked, with no unlock button. how do i get back into the ipod

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

TS1424 I have used itunes forever, now when I try to go to the itunes store, it says an error has occured error code 3212, how do I get back into the itunes store

I have used itunes forever, Sunday night when I tried to get into the itunes store an error popped up and said could not open; error code (-3212), How do I get back into the itunes store?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

I just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

I assume you have iTunes Match turned on in iTunes?
You can create a smart playlist in iTunes that has "iCloud Status" is "Matched" or "Upload" - that will tell you what's in the cloud.

TS2972 How do i get files into the library form a Windows host computer

How do I get files into the sharing library with a Windows host Computer? Other than buying another computer!

You use iTunes, though only specific formats are supported.
Which AppleTV modesl do you have? 1, 2 or 3?

How to feed a cluster into the mathscript?

Similar Messages

Maybe you are looking for