How to fetch current system time in milliseconds using AppleScript?
I need to write the actual systemtime hh:mm:ss.msc into a field of FileMaker by using AppleScript (as FileMaker does still not support TimeStamps down to milli seconds) - now, how to realize that?
Any help is welcome - Thanx
Hi Mathur,
kindly help me in mapping a field in which I have to map current system time.
I think there is no standard function for time like the date so do i write a UDF for the same or any other way an in case a UDF than please help in that.
Mathur no need to write UDF for that..
Use standard function Current date-------> In that (Target Format) u have to specify the time i.e: HHmmss
Thats it..... Noe use this function as u like...
Satya Kumar
Similar Messages
-
How to pass Current System time in the target field?
Hi Experts
kindly help me in mapping a field in which I have to map current system time.
I think there is no standard function for time like the date so do i write a UDF for the same or any other way an in case a UDF than please help in that.
Thanks
AprajitaHi Mathur,
kindly help me in mapping a field in which I have to map current system time.
I think there is no standard function for time like the date so do i write a UDF for the same or any other way an in case a UDF than please help in that.
Mathur no need to write UDF for that..
Use standard function Current date-------> In that (Target Format) u have to specify the time i.e: HHmmss
Thats it..... Noe use this function as u like...
Satya Kumar -
Current System Time in Cold Fusion
Hi,
I am getting the current system Date as below:
<cfset todaydate = CreateODBCDate(now())/>
How to get current system time in coldfusion in a similar way
and what is the syntax for it.
<cfset currenttime = XXXXXXXXXXX/> which should be of
24 hrs time format
Could anyone please help me on this
Thanks,
Cold Fusion Beginner<cfset currenttime = XXXXXXXXXXX/> which should be of
24 hrs time format
<cfset currenttime = now()>
That will be a date-time object of the current time. If you
would like
that formated in a standard 24 hour format:
<cfset currenttime = timeFormat(now(), "HH:mm:ss")>
The 'HH' time format mask is for hours in the 24 hour clock;
'hh' will
give you hours in a 12 hour format. -
How to compare the current system time with two timing?
want to get the current system time and compare with the two different timing example startwindow time as 2:00:00AM and endWindowTime as 6:00:00AM. if my current system time falls between these window i have to execute my rest of the code.
my below code works for fine for JAVA 1.6 version when i do the same code with JAVA 1.4 i am getting different date and time
String starTime=(String) NightlyvendorStatus[0].getPropertyValue("startTime");
String endTime=(String) NightlyvendorStatus[0].getPropertyValue("endTime");
Date windowStarttime = new SimpleDateFormat("HH:mm:ss").parse(starTime);
Date windowEndtime = new SimpleDateFormat("HH:mm:ss").parse(endTime);
Date systemdate = new Date();
SimpleDateFormat parser = new SimpleDateFormat("HH:mm:ss");
String systemTime=parser.format(systemdate);
Date currentTime = new SimpleDateFormat("HH:mm:ss").parse(systemTime);
if (currentTime.after(windowStarttime) && currentTime.before(windowEndtime)){
--- rest logic here---}
the output from JAVA 1.4 IS Thu Jan 01 02:00:00 GMT 1970 Thu Jan 01 06:00:00 GMT 1970 Thu Jan 01 03:23:00 GMT 1970
HOW TO DO this logic..Hi,
You can try converting dates into timestamp and compare just like as comparing two integers variables.
Regards,
Anshul -
How cost;ly it is to get the current system time
I am using this call "System.currentTimeMillis()" to get the current system time. I need to now how costly it is to get the current system time.
Why don't you time it -:) Run it 10000 times and print the first and last result. The difference is the time it took.
-
How to filter list items by current system time in search result wp or result source SharePoint 2013
I want to display Items with PressDate less than or equal
to current time in my search result webpart in SharePoint 2013.
It is working fine for current date but not considering current time.
{searchTerms} ContentType="ABC" PressDateTime<{Today+1}
Above query not supporting for Now(), due to that it
is showing items which are less than or equal to current (today's) date.
How can I compare time with current system Time?..Thanks in advance.
Regards, --NPYou can achieve the same by using a Current Date Offset in a CAML Query to Filter List Items.
Have below links for your reference.
Sharepoint Tips And Tricks
CAML Query to Date prior to 30 days from today
Thanks. -
BPM: How to capture Webservice system Time
Dear friends,
I have one Sybchrounous Interface as follows :
Local PI folder -
>PI -
> Webservice system
( Sync Interface )
Overall flow:
1. PI Picks up the Control file consisting of date& time, count and start fields from PI folder.
2. PI mapping converts the file to soap request message and sends it to Web Service
3. PI receives the response soap message from web service converts into an XML file and places in the PI folder.
4. The loop continues in PI BPM until all the records of particular time period are retrieved.
Logic in Detail:
5. The initial request file consists of a user defined time stamp (since), count and start values to retrieve the initial load.
6. PI BPM sends this request in a synchronous mode to Web service and gets the response back.
7. Apart from the device details, the response message from WS consists of u2018current_timeu2019 field which is the current system time of webservice when the query is executed on the web service System.
8. BPM has to capture this field during first iteration and updates the source request message field u2018sinceu2019 with the web service system time.
9. From next cycle, PI picks up the file which consists of WB service system time in the u2018sinceu2019 field.
10 BPM continues in loop until all the records are fetched from web service and writes the files with time stamp concatenated to the PI folder.
Bottlenecks:
Tried to implement with BPM ..But facing problems to implement point 4 ,8 and 10 .
Kindly guide me how we can design this interface .
Renu.Dear friends,
I have one Sybchrounous Interface as follows :
Local PI folder -
>PI -
> Webservice system
( Sync Interface )
Overall flow:
1. PI Picks up the Control file consisting of date& time, count and start fields from PI folder.
2. PI mapping converts the file to soap request message and sends it to Web Service
3. PI receives the response soap message from web service converts into an XML file and places in the PI folder.
4. The loop continues in PI BPM until all the records of particular time period are retrieved.
Logic in Detail:
5. The initial request file consists of a user defined time stamp (since), count and start values to retrieve the initial load.
6. PI BPM sends this request in a synchronous mode to Web service and gets the response back.
7. Apart from the device details, the response message from WS consists of u2018current_timeu2019 field which is the current system time of webservice when the query is executed on the web service System.
8. BPM has to capture this field during first iteration and updates the source request message field u2018sinceu2019 with the web service system time.
9. From next cycle, PI picks up the file which consists of WB service system time in the u2018sinceu2019 field.
10 BPM continues in loop until all the records are fetched from web service and writes the files with time stamp concatenated to the PI folder.
Bottlenecks:
Tried to implement with BPM ..But facing problems to implement point 4 ,8 and 10 .
Kindly guide me how we can design this interface .
Renu. -
How to get the system time(hh:mm:ss) in jspx file itself.
Hi I'm using jdeveloper 11.1.1.3.0.
I am having one transient attribute in VO (data type is Timestamp and format is hh:mm:ss) and created the data control. Now I am drag and drop that attribute in one jspx file itself. if i run that page mean i need the current system time as a output. it ll automatically run in the output page(like digital clock - HH:MM:SS). how to implement this one plz help me sir.Hi john
I got the output using the poll operation in the jspx file. But the mouse pointer is also updated(arrow mark and round alternatively). so how to stop the mouse pointer update.
Regards
Ragu -
How can i capture system time in an infoobject
Hi
Can I get the current system time and date into infoobjects?? if yes how??
Regards
SujaiHi
i guess i wasn't clear with the requirement.
the data is going to be entered in the infoObject manually thru the infoObject maintenance screen (RSD1), i will not be able to put the code in the transformation since there is no transformation at all.
I wanted to know if i could populate the fields without the user's help in keying in the values for the date and time attributes.
can i acheive this thru a custom coversion routine???
Hope i am clear this time.
Regards,
Sujai
Edited by: Sujai S on Mar 18, 2009 5:55 PM -
How to get the system time in a Swing application ?
I know how to do it in JavaScript, but not java. Please help me, and also how to get the system time in an Applet. Thanks !!!
Check this link, I hope it helps
http://202.71.136.142:8080/globalleafs/Swing/View.jsp?slno=22&tbl=0 -
To get the system time in milliseconds
i want to get the system time in milliseconds
eventhough the MLS(milliseconds) is given in the select statement as follows,
sql>select to_char(sysdate,'MON:DD:YYYY.HH:HH:MI:SS:MLS') "NOW" from dual;
does not seem to work.
it throws the error that
ORA-01821: date format not recognized
please give a solution
thanks in advance
nullHi,
Yes, any of Oracle tools could not provide the milliseconds.
Then why cant not use external procedures (RPC) and get a time string from OS.
These are steps:
1. Create a C shared library.
(Some times U have to go for OCI programs.)
Milliseconds provision is there in C. ( use tm struct). Make a string as ur format by using any string functions in C or sprintf(). By using return, return this string.
Here error may come, if u are using pure C. Better to go for OCI call back methods.
2. Create oracle library and attach this shared libary with it.
3. Create external procedure/function and connect this.
If u want code, I can post it here.
with regards,
Boby Jose Thekkanth,
Dharma Computers(P) Ltd.
Bangalore-India.
www.dharma.com.
null -
Howto Current System Time in the format YYYYMMDDHHMMSS
Hi, Is there a way to calculate current system time in java so the output will be in the format YYYYMMDDHHMMSS?
Create a Date object from the system time:
long now = System.currentTimeMillis();
java.util.Date date = new java.util.Date(now);
System.out.println(date);
You can then use the SimpleDateFormat class to format the Date however you want. -
Hi
I want to subtract few mins (say 5 min , 10 min ,15 mins , max to 55 mins) from the current system time,
ex-current time 00:40:00
Subtract 5 mins(means 5 mins backward)
Final time 00:35:00
ex-current time 01:20:00
Subtract 30 mins(means 30 mins backward)
Final time 00:50:00
Pls help me with this with a appropriate logic or FM..
Thanks a lot in advance
Basic Date and Time questions are not allowed. They have been answered umpteen times. Please search for them.
Edited by: kishan P on Sep 1, 2010 12:05 PM
Edited by: Matt on Sep 1, 2010 9:01 AM - And please do not post in ALL CAPITALSMay be you can do something like this!
data: l_time like sy-uzeit.
data: l_time1 like sy-uzeit value '06'. "6 hrs to be deducted from system time
move sy-uzeit to l_time. "this is system time
"write l_time.
"write:/ l_time1.
SUBTRACT l_time1 from l_time.
write:/ l_time. "This is 6 hrs behind system time
Rajasekhar -
hi
good
i want to subtract 6 hours from the current system time,
ex-current time 17.07
Subtract 6 hours(means 6 hours backward)
Final time 11.07
Pls help me with this with a appropriate logic.
Thanks a lot in advance
mrutyun^May be you can do something like this!
data: l_time like sy-uzeit.
data: l_time1 like sy-uzeit value '06'. "6 hrs to be deducted from system time
move sy-uzeit to l_time. "this is system time
"write l_time.
"write:/ l_time1.
SUBTRACT l_time1 from l_time.
write:/ l_time. "This is 6 hrs behind system time
Rajasekhar -
How do you return System Time of the local box in FTP command
How do you return System Time of the local box in FTP command... since I want to output the system time of my local box copying to the FTP server...
Its asking me to enter a new date... I actually want to return it into a log file since I am using ws_ftp.... but the log files dont have any date time being returned... i just want to be able to echo that date time into the log file... but it doesnt do that... I also tried
SHELL ECHO %DATE% %TIME%
but it returns this in the log file
Processing Line 10 [SHELL ECHO %DATE% %TIME]
I also tried in my ws_ftp script and it says:
Processing Line 15 [!Date]
Sending command [!Date] with parameter []
!Date
500 '!DATE': command not understood
Failure in command [!Date]
Maybe you are looking for
-
ERROR partner 'localhost:sapgw00' not reached
Hi, i have BI system with portal. when i am trying to connetct portal with url http://<hostnaem>/<ip>:<portnumber>/irj/portal ---it is displaying as 500 internel server error with java.lang.NullPointerException: null . i am keeping here two logfiles
-
Question About Text Message With LG Env3 phone
I'm getting an arrow and it's sending a text from one Verizon phone to another. What does this mean? <Branched to a new discussion for more exposure.> Message was edited by: Verizon Moderator
-
How to create a Table of content in pages?
I am using iPad pages, and figuring out how to create a table of content.
-
Can anyone help i have a new laptop and want to transfer all my itunes music over to this. Have downloaded itunes tried to sync my music and transfer but not working. It prompted me to erase and sync or transfer purchases which is the option i went
-
Problem of refreshing a tree in web dynpro java
hi all, I'm facing a problem for refreshing a tree in web dynpro java for SAP HR. I created a viewset with 2 cells( 1 view for each). In the 1st view I created a droplistbyindex to select the unit ID and in the 2nd view ( defaut=false) I called a me