How to fetch domain value range short descriptions?

hi all,
how can i fetch the short descriptions given in domain level, as single values- descriptions for report generation
Regards,
Naveen Natarajan

Hi naveen,
1. This if the FM.
2. eg
DATA : DD07V LIKE DD07V OCCURS 0 WITH HEADER LINE.
*----- Get all Master Document Types
CALL FUNCTION 'GET_DOMAIN_VALUES'
    EXPORTING
      DOMNAME         = 'VBTYP'
    TABLES
      VALUES_TAB      = DD07V
    EXCEPTIONS
      NO_VALUES_FOUND = 1
      OTHERS          = 2.
DD07V will contain all the domain values.
regards,
amit m.

Similar Messages

HOW TO ACESS DOMAINS VALUE RANGE PROGRAMTICALLY

DOMAIN IS WITHOUT VALUE TABLE, BUT WITH FIXED VALUES,
HOW CAN WE ACCESS THESE VALUES PROGRAMTICALLY,
WELL NOT FOR VALUE REQUEST TO SEE THE VALUES BUT TO DISLPAY ALL THE VALUES ENTRED IN THE VALUE RANGE OF DOMAIN , WITHIN THE PROGRAM
REGARDS

Using the FM is probably the best way to go.
report zrich_0001.
data: idd07v type table of dd07v with header line.
start-of-selection.
call function 'DD_DOMVALUES_GET'
     exporting
          domname        = 'RFBSK'    "<<--- Supply domain name here
          text           = 'X'
          langu          = sy-langu
     tables
          dd07v_tab      = idd07v
     exceptions
          wrong_textflag = 1
          others         = 2.
loop at idd07v.
write:/ idd07v-domvalue_l, idd07v-ddtext.
endloop.
Regards,
Rich Heilman

How to fill Domain Value range Programatically?

Hi Experts,
I like to fill the domain range values from 'ZTABLE' ..
so please help me how to fill the domain range values programatically .
Thanks
Banu.

Hi Banu,
You can update these values for Domain using Table *DD07L*.
DOMNAME " Domain Name
AS4LOCAL
VALPOS
AS4VERS
DOMVALUE_L " Lower Limit
DOMVALUE_H " Upeer Limit
APPVAL
So in program
Fill your Work Area and update
modify table DD07L where DOMNAME = 'YOUR_DOM_NAME'.
Cheerz
Ram

How to retrieve data from domain(Value Range) of the table

hi
how to retrieve data from domain(Value Range) of the table
thanks

Hello,
You can try using the FM: DOMAIN_VALUE_GET TB_DOMAINVALUES_GET.
BR,
Suhas
Edited by: Suhas Saha on Mar 24, 2009 10:08 AM

Extract data from domain-value range

Hi,
I have a requirement to extract data from Domain-Value range.
I am using MDM generic extractor(mdmgx)
in 'Maintain ports and check tables' i can create a port but i should mention a table name.
I have a 'DOMAIN'
with a specific value range:
01    text1
02   text2
03   text3
so on...
i need to get these entries as a part of extracted data.
Could you please tell me how to do this?
Thanks a lot in advance.
Regards,
Rashmi

Hey guys,
you're making things much to complicated. For extracting Domains with MDMGX, the TABLE NAME equals the DOMAIN NAME. Example for domain XFELD that is a common Yes/No Flag:
CLIENT            000
SYSTEM TYPE       R3
OBJECT TYPE       Vendor
MDM PORTCODE      LT_YesNoIndicator
TABLE NAME        XFELD
NONLANG FIELDS    KEY=Key
LANG FIELDS       LANGKEY=LANGKEY,VALUE=Name
WHERE CLAUSE
LINK INFO
FUNC XML
FUNC XSD
PROCESS LEVEL     0
TABLE NAME equals the domain name.
NONLANG FIELDS and LANG FIELDS use default entries as defined above.
If you check your system for "table" XFELD, you'll clearly see that it's a domain.
Cheers
Michael

Filtering domain value ranges

Is it possible to filter domain value ranges when displaying a dropdown listbox in a table control according to the value of another field?
For instance,
- I have an ITAB with the fields FIELD1 and FIELD2 and a table control TABCON connected to it.
- FIELD1 is an instance of the domain ZDOMAIN1 and FIELD2 is an instance of the domain ZDOMAIN2.
- ZDOMAIN1 has the value range X, Y.
- ZDOMAIN2 has the value range A, B, C, D.
The value of FIELD1 will be already set and not changeable at this point, as for the drop-down list for FIELD2, I want it to include
- only A and B if the value of FIELD2 is X for that entry
- only C and D if the value of FIELD2 is Y for that entry
I hope I've been able to explain my problem here.

yes it is possible
in process before output, you should build the value list dynamically and call function module VRM_SET_VALUES to update it on screen

Domain value range

hi
i am changing the table field domain value range. after changing i am getting the warning msg like below. if i ignore it and transport odes it affect anyways.
and also does anyone tell me when we transport only the structure get transported or even the values get transported?
<b>The key length, i.e. the sum of the field lengths of all the key fields of the table,
is more than 120 bytes.
Note the following restricted fuctionality for this table:
- Table contents cannot be transported by specifying key values, at
best by specifying generic key values with a maximum length of 120
bytes.
- The table may not be used as the base table of a lock object.</b>

Hi ,
Instead of changing the domain value range ,
create a Z Domain group say copy it from the existing one and increase the range .
This will reflect on the field name in the Ztable . Do activate and adjust database from SE14 on the table .
Remember that the new range of values will be overlapped to the existing version in the target system .
for this what u have to do is for the existing domain field where used list see the tables in which it is to be used .
and then if its not causing any inconsistencies u can transport or else the dependent tables which are referring to the domain group have to be modified .
regards,
Vijay

Possible to display domain value range descriptions rather than values?

Hi All,
We're using ECC6.
I have a context input field on my view, which is bound to a data type that is bound to a domain. The values are brought back from the domain automatically but when the user selects a row, the fixed value is displayed rather than the description, i.e. the code for the value is displayed rather than the short description.
This is not acceptable. Before I go off and code something for this instead is there a parameter I can set to tell it to display the description rather than the code.
Many thanks,
Liz.

HI Liz,
You can read the domain name i guess, then you can use the Function Module DD_DOMVALUES_GET, make the call as
CALL FUNCTION 'DD_DOMVALUES_GET'
       EXPORTING
            domname        = i_dom_name
            text           = 'X'
            langu          = sy-langu
       IMPORTING
            rc             = lv_rc
       TABLES
            dd07v_tab      = t_dd07v
       EXCEPTIONS
            wrong_textflag = 1
            OTHERS         = 2.
you should get the short description in the field ddtext of result t_dd07v.
Now instead of creating a domain you can provide these values to the valid values for your context dynamically.
Hope this helps.
Regards
Vineet

Any FM avaliable for reading domain value range

Hi experts,
Is there any FM avaliable to read values from value range of a domain.
I need to fetch short descriptions for corresponding fixed values in value range.
Please help.
Thanks in advance,
Neelima

Hi,
Is there any FM avaliable to read values from value range of a domain?
Yes. Of course, you can try using the following.
Let me assume that there is a domain called ZGENDER and it has the following fixed values:
Value Description
M        Male
F         Female
U         Unknown.
Then do the following code:
DATA: l_t_gender TYPE TABLE OF dd07v.
To get the possible list of Genders
CALL FUNCTION 'GET_DOMAIN_VALUES'
    EXPORTING
      domname         = 'ZGENDER'
    TABLES
      values_tab      = l_t_gender
    EXCEPTIONS
      no_values_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I need to fetch short descriptions for corresponding fixed values in value range.
Yes. After calling the function module, l_t_gender-ddtext will have the short descriptions.
Please revert back for any clarifications.
Best Regards,
Suresh

Get domain value range dynamically

Hi all,
I need to create a dynamic method that retrieves the value range (key-value) of a domain.
It is pretty simple to get fixed values using FM DD_DOMVALUES_GET, but how do I manage a value table?
For example:
Field XFELD has fixed values so use DD_DOMVALUES_GET
Fields BUKRS and SPRAS have value tables.
I can get the value table name using FM DDIF_FIELDINFO_GET and retrieve the data from that table. Unfortunately, I can be sure to get the right key field, but I can't be sure to get the right value field, it depends on the value table definition.
BUKRS has T001 that stores the text in field BUTXT of the same instead SPRAS has T002 that stores the text in text table T002T in field SPTXT.
Is there any standard function module that does the trick?
In this thread Gregor Wolf managed it manually using a case statement, but I would avoid it, too many case statements...
Thanks
Ivan

What I am doing is not quite the same but similar - I am dynamically getting the text description when I have a data element and the value of the variable that references that data element.
I was pointed to CL_TEXT_IDENTIFIER which when you pass in the domain and the value magicaly brings back the text description, despite the fact that, as far as I can see, SAP has set up almost every text table slightly differently - sometimes in the main table like T001W or lFA1, sometimes which just the language and the value as a key, sometimes with extra key fields (e.g. MAKT) and sometimes with added organisational key fields e.g. the same GL account have different text descriptions in different chart of accounts.
I think at some stage CASE statements or subclasses are going to have to come into the equation, due to the utter lack of consistency in SAP table defintions.
Cheersy Cheers
Paul

Domain Value Range: long value

Hi,
how can i get the "long value" (Short Description of the Fix. Value) of a Domain?
-> for example
A    ABAP
J    JAVA
In the db, i get the value 'A' or 'J' , on screen i want to give out ABAP or JAVA..
Thx

This will work
REFRESH vrm_table.
SELECT domvalue_l ddtext INTO TABLE vrm_table
    FROM dd07t
    WHERE domname = 'ZLMFUCONTTYPE'
      AND ddlanguage = sy-langu
      AND domvalue_l IN type_range.

Diplay Domain Value Range.

Hi,
I wish to display Value Range as define in Domain for certain field in R/3.
Eg, ZSEX domain 's Value Range in R/3 as below
01 Male
02 Female
Assume ZZSEX field is using ZSEX domain;and
Expected "Male" to be display when field value ZZSEX = 01.
How to achieve this in Java Web Dynpro?
Thanks.
Best regards,
Xiang Li Heah

Hi,
Why dont you send both ZSEX domain 's value range and text to WebDynpro from R/3 in bapi output as below?
ZZSEX     ZZSEXTXT
01           Male
02           Female
(Or)
What you need to do is , You have to store these texts (key , value) in WebDynpro side.
You can use simple type for this purpose.
Create one simple type "SEXSimpleType" in webdynpro local dictionary and enter the enumeration values as below.
01           Male
02           Female
Create one context attribute called "SEXAttr" and change the type of this context attribute to "SEXSimpleType".
Now in the code when the value of ZZSEX = 01 then get the corresponding text by using the below code.
ISimpleTypeModifiable simpleType = wdContext.nodeTest().getNodeInfo().getAttribute( "SEXAttr").getModifiableSimpleType();
ISimpleValueServices services = simpleType.getSVServices();
IModifiableSimpleValueSet valSet = services.getModifiableSimpleValueSet();
wdComponentAPI.getMessageManager().reportSuccess( "SexText: " + valSet.getText(ZZSEX));
Regards,
Charan

How to change the standard Fields short description in KNVV table

Hi All,
Our system is recently upgraded from 4.7 to ECC 6. When we compared both versions we found the KNVV table fields descriptions are changed in 4.7(customer modifications done in 4.7) and same these customer modifications are not copied to ECC 6 from 4.7 version.
So I tried to change the short description at domain level with the help of access key. But the description is not changed. Can you please let me know is there any procedure that how can we change the fields description for standard tables.
KNVV table in 4.7                                                        ECC 6
Fields                       Short Description                     Short Description
1. KVGR1               Gen.Bus.Terms print                Customer group 1
2. KVGR2               VAT on FOC                            Customer group 2
3. KVGR3               Confirmation status                 Customer group 3
4. KVGR4               Collect Billing                           Customer group 4
5. KVGR5               SC Surchge Excl                    Customer group 5
Regards,
Jyothi CH.

You need not use access key to change field labels
Transaction CMOD -> Go to -> Text Enhancements -> Keyword -> Change.
Here you can change all data element KNVGR1 to KVGR5

Please help..it's Urgent..How to fetch the value from table row from Page

Hi,
I have created a table with 2 LOV's , LOV2 is dependent on LOV2.
Here I can not use the general Dependent LOV concept, as these values are coming from 2 different LookUps.
I am not able to fetch the user input for LOV1 (from page) .that is why not able to set the where cluse fro 2nd LOVVO.
I have used this code:
if ("ViolationCat".equals(lovInputSourceId)) {
OAMessageLovInputBean msglov =
(OAMessageLovInputBean)webBean.findChildRecursive("ViolationCat");
// String p_violation_category = "'"+(String)msglov.getValue(pageContext)+"'";
String p_violation_category =
(String)msglov.getValue(pageContext);
// System.out.println(" p_violation_category =" +
// p_violation_category);
String v_violation_category = "";
//System.out.println("vcat=" + vCat);
OAViewObject violationVO =
(OAViewObject)am.findViewObject("SNI_Violation_DtlsVO2");
Number vcatViolationIdnum =
(Number)violationVO.getCurrentRow().getAttribute("ViolationId");
String vcatViolationId = "" + vcatViolationIdnum;
pageContext.putTransactionValue("vcatViolationId",
vcatViolationId);
pageContext.putTransactionValue("p_violation_category",
p_violation_category);
String query =
" SELECT LOOKUP_CODE, \n" + " MEANING, \n" +
" LOOKUP_TYPE \n" +
" FROM apps.fnd_lookup_values \n" +
" WHERE LOOKUP_TYPE ='SNI_VIOLATION_CATEGORY' AND MEANING=?";
PreparedStatement ps = txn.createPreparedStatement(query, 1);
try {
ps.setString(1, p_violation_category);
ResultSet rs = ps.executeQuery();
//System.out.println("before while,");
// rs.next();
// v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category="+v_violation_category);
while (rs.next()) {
//System.out.println("inside while");
v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category=" +
// v_violation_category);
ps.close();
} //try ends
catch (Exception e) {
e.getMessage();
//System.out.println("in catch.." + e.getMessage());
OAViewObject subCatVO =
(OAViewObject)am.findViewObject("SNI_ViolationSubCategoryVO1");
//System.out.println("get VO before where clause: subCatVO::"+subCatVO.getQuery());
subCatVO.setWhereClause("LOOKUP_TYPE like '%SNI_VIOL_SUB_CAT_" +
v_violation_category + "'");
System.out.println("after set where clause VO: subCat VO::" +
subCatVO.getQuery());
subCatVO.executeQuery();
// System.out.println("query of subCat VO::" +
// subCatVO.getQuery());
//End of sub category Validation
It is working fine only for the 1st row of teh table.
I have tried to fetch the value using :
String violationCategory = (String)violationVO.getCurrentRow().getAttribute("ViolationCategory");
String violationSubcategory = (String)violationVO.getCurrentRow().getAttribute("ViolationSubcategory");
But it is fetching null value.
Please tell me how can I able to fetch the values.

Hi
in your scenarion,first u have to identify the particular row of table where the changes is being made ,u have to use this code .when u select the lov ,first it will give the row refernce and then u have to catch the lov event
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
if ("<ItemPPREventName>").equals(event))
// Get the identifier of the PPR event source row
String rowReference =
262
pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
Serializable[] parameters = { rowReference };
// Pass the rowReference to a "handler" method in the application module.
am.invokeMethod("<handleSomeEvent>", parameters);
In your application module's "handler" method, add the following code to access the source row:
OARow row = (OARow)findRowByRef(rowReference);
if (row != null)
thanx
Pratap

How to fetch the value of tabular form item in javascript

Hello all
I want to do some calculations on the value entered by the user in the textfield of a tabular form, how can I fetch the value of tabular form item in the javascript?
I am using normal tabular form, not using apex_item tabular form.
I can pass the current textfield value to the function using "this" as a parameter, but how can I fetch the value of other rows of that same column?
Thanks
Tauceef

Hi Alistair
jQuery is still not working, but I got it done through some other means, this is the code:
function total(pThis){
var l_Row = html_CascadeUpTill(pThis,'TR');
var l_Table = l_Row.parentNode;
var l_Row_next = l_Row;
var n_rows = l_Table.rows;
var lInputs;
var v1;
var sum = 0.0;
var temp;
var i = 0;
var j = 0;
//alert(n_rows.length);
while(j < (n_rows.length - 1))
temp = 0;
if(l_Row_next != null){
lInputs = html_Return_Form_Items(l_Row_next,'TEXT');
v1 = lInputs[0].value;
//alert(v1);
sum = parseFloat(sum) + parseFloat(v1);
l_Row_next = l_Row_next.nextSibling;
temp = 1;
if(temp == 0){
l_Row_next = l_Table.getElementsByTagName('TR')[1];
lInputs = html_Return_Form_Items(l_Row_next,'TEXT');
v1 = lInputs[0].value;
sum = parseFloat(sum) + parseFloat(v1);
l_Row_next = l_Row_next.nextSibling;
j= j+1;
$x('P78_TOTAL').value= parseFloat(sum);
I am calling this function onblur event of the textfield.
Still I am having one problem, I want to perform this calculation on load of the page also, how can I do that? because while calling onblur of the textfield I can pass that textfield to this function but on onLoad how I will pass the textfield to call this function so that I will be able to get the textfield value in the function?
there may be some rows already existing, so I want the total of the existing rows to be displayed in my P78_TOTAL textfield that is why I need to do this calculation on onLoad of the page.
Thanks
Tauceef
Edited by: Tauceef on Jul 8, 2010 4:57 AM

How to fetch domain value range short descriptions?

Similar Messages

Maybe you are looking for