How to fetch encrupted data in file

Hi All,
My scenario is that we send payments data to bank to process vendor payments.
Data is received from Finance(R/3) server to XI server, where our XI server pass data to Bank's XI server.
As it a crucial data, we exchange certificates to share data.
We have given sign and encrypt details in our receiver agreement.
At XI, we can see the payment details in payload,
My requirement is that how/from where can I fetch the encryted data and save it in file, If I want to save the encrypted data at my local desktop.
Do I have to create a seperate scenario to fetch the encrypted data.
Please suggest.
Regards,
Sachi

Dear Sachi,
Basically it means that SAP guys really do have a sense of humour it is a quotation from the Bible, Job 38:11, as you might have already checked in google.
Anyway, to solve this problem in PI you have to implement the OSS Note 1419607. For now, this functionality seems to be hidden in your PI release. You can also refer to this thread for further details:
PI Monitor Message: "Hitherto shalt thou come, but no further". No lie :)
Hope this helps finally,
Greg

Similar Messages

How does Fetch Rx Data works?

Dear Sir or Madam,
I have a problem when I am implementing MAC protocols by using LabVIEW and USRP2. Actually there are two problem, I will show them in a simple CSMA protocol.
The first design is that in CSMA protocol, node 1 sent a data packet to node 2, and node 2 received the packet, analyzed it, and sent back a corresponding ACK. The problem is, node 2 need to switch between receiving mode (to receive the packet) and transmitting mode (to sent ACK back), and the switching time is non-neglectable (around 7 to 10 ms). That delay significantly decreases system performance. Is that any way to reduce the switching time?
The second problem is rising after the first one. To overcome the time delay, I use two antennas in the system, therefore one can always work in Tx mode and another in Rx mode therefore no switching is needed. The block diagram is simplified as figure (if transmitter mode is set to false, then the receiving VI works by using another antenna).
The problem is, since we are using if structure, there is noway that transmitting and receiving can work concurrently. However, nodes always receive the signal it sent in the last while loop round. For example, after receiving a DATA packet from another node, this node sends a ACK back, and then the transmitter mode are switching to false then I can receive next packet. However, after sending the ACK, and switching to reception mode, I can receive the ACK I sent myself! That is my question, how does fetch Rx Data VI works?
Thank you very much!

Hi HustLiliAn,
Thank you very much for you quick reply. I have to say sorry that my code is only partially belonging to me so I cannot distribute all of them, beg your understanding
To overcome the delay, I open both Tx and Rx session at the beginning of the code so I don't need to initial and abort session before and after using respectively. It could save a lot of time (I measure the same delay as you shown). I read from WBX application notes (http://files.ettus.com/uhd_docs/manual/html/dboards.html) that if the system is working in the duplex mode, then antenna TX/RX is using for transmission and RX2 is using for reception. I simply tested it and it seems true.
Since two antennas are working concurrently, the receiving antenna (RX2) can receive packet even it is sent by TX/RX. My problem is, in software level I have used the if structure to make transmission and reception work successively, RX2 can still receive signal sent by TX/RX. That is the real problem. Probably we can write some compensation VI which we can remove it by using the transmitted signal, but I still want to know is there any official solution for it.
BTW, I use the modulation toolkit. Its demodulation VI is also quite slow.
Thank you for your reading. I am not a native English speaker, so if my post make you confuse, please let me know and I would like to elaborate it again.

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

How to store xml data into file in xml format through java program?

HI Friends,
Please let me know
How to store xml data into file in xml format through java program?
thanks......
can discuss further at messenger.....
Avanish Kumar Singh
Software Engineer,
Samsung India Development Center,
Bangalore--560001.
[email protected]

Hi i need to write the data from an XML file to a Microsoft SQL SErver database!
i got a piece of code from the net which allows me to parse th file:
import java.io.IOException;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
import org.apache.xerces.parsers.SAXParser;
import java.lang.*;
public class MySaxParser extends DefaultHandler
private static int INDENT = 4;
private static String attList = "";
public static void main(String[] argv)
if (argv.length != 1)
System.out.println("Usage: java MySaxParser [URI]");
System.exit(0);
String uri = argv[0];
try
XMLReader parser = XMLReaderFactory.createXMLReader("org.apache.xerces.parsers.SAXParser");
MySaxParser MySaxParserInstance = new MySaxParser();
parser.setContentHandler(MySaxParserInstance);
parser.parse(uri);
catch(IOException ioe)
ioe.printStackTrace();
catch(SAXException saxe)
saxe.printStackTrace();
private int idx = 0;
public void characters(char[] ch, int start, int length)
throws SAXException
String s = new String(ch, start, length);
if (ch[0] == '\n')
return;
System.out.println(getIndent() + " Value: " + s);
public void endDocument() throws SAXException
idx -= INDENT;
public void endElement(String uri, String localName, String qName) throws SAXException
if (!attList.equals(""))
System.out.println(getIndent() + " Attributes: " + attList);
attList = "";
System.out.println(getIndent() + "end document");
idx -= INDENT;
public void startDocument() throws SAXException
idx += INDENT;
public void startElement(String uri,
String localName,
String qName,
Attributes attributes) throws SAXException
idx += INDENT;
System.out.println('\n' + getIndent() + "start element: " + localName);
if (localName.compareTo("Machine") == 0)
System.out.println("YES");
if (attributes.getLength() > 0)
idx += INDENT;
for (int i = 0; i < attributes.getLength(); i++)
attList = attList + attributes.getLocalName(i) + " = " + attributes.getValue(i);
if (i < (attributes.getLength() - 1))
attList = attList + ", ";
idx-= INDENT;
private String getIndent()
StringBuffer sb = new StringBuffer();
for (int i = 0; i < idx; i++)
sb.append(" ");
return sb.toString();
}// END PRGM
Now , am not a very good Java DEv. and i need to find a soln. to this prob within 1 week.
The next step is to write the data to the DB.
Am sending an example of my file:
<Start>
<Machine>
<Hostname> IPCServer </Hostname>
<HostID> 80c04499 </HostID>
<MachineType> sun4u [ID 466748 kern.info] Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 360MHz) </MachineType>
<CPU> UltraSPARC-IIi at 360 MHz </CPU>
<Memory> RAM : 512 MB </Memory>
<HostAdapter>
<HA> kern.info] </HA>
</HostAdapter>
<Harddisks>
<HD>
<HD1> c0t0d0 ctrl kern.info] target 0 lun 0 </HD1>
<HD2> ST38420A 8.2 GB </HD2>
</HD>
</Harddisks>
<GraphicCard> m64B : PCI PGX 8-bit +Accel. </GraphicCard>
<NetworkType> hme0 : Fast-Ethernet </NetworkType>
<EthernetAddress> 09:00:30:C1:34:90 </EthernetAddress>
<IPAddress> 149.51.23.140 </IPAddress>
</Machine>
</Start>
Note that i can have more than 1 machines (meaning that i have to loop thru the file to be able to write to the DB)
Cal u tellme what to do!
Even better- do u have a piece of code that will help me understand and implement the database writing portion?
I badly need help here.
THANX

How to fetch MIR4 data based on MB51 refrence number

hi Experts.
i want to fetch MIR4 data based on MB51 refrence number.
I want to fetch below fileds in MIR4 TCODE.
1. RBKP-BELNR (Invoice Document NUMBER)
2. DRSEG-MENGE ( quantity )
3. DRSEG-WRBTR ( Amount in document currency)
As mentioned above DRSEG is structure.
please help me how to fetch 3 data fileds based on my MB51 refrence.( mkpf-xblnr ).
In MIR4 , Number of External Delivery Note( DRSEG-XBLNR ) is same as my MB51 refrence ( mkpf-xblnr).
This is the only link avilable to fetch above 3 fields.
kindly give any suggestions .
thanks & regards,
hari priya

Hi ,
can anybody give me suggestions .
What is the table name for fetching above 3 fileld data .
DRSEG is structure .
Thanks & regards,
Hari priya

How to fetch the Date column(or Month column) from the file name from the specified path in ODI 11g

Hi ALL,
Can any one help us regarding How to fecth the Date column(or month column) from the file name specified in the path in a generalized way .
For example :
file name is :subscribers (Cost) Sep13.csv is specified in the below path
E:\Accounting\documents\subscribers (Cost) Sep13.csv
here I need to fetch the "Sep13" as a Date column in the ODI 11g in the generalized way.
Can any one help us in this case as early as possible.

I would suggest using a piece of Jython code for this. Something like this...
import os
import os.path
filelist = os.listdir(E:\Accounting\documents\)
for file in filelist:
datestr = file[19:-4]
You'd need to work out what to do with datestr next... perhaps write it to a table or update an ODI variable with it.
Hope this is of some help.

How to fetch the data from databse table and get the required output

Hi,
I have made a project that connects CEP to database table but i m getting some problem in fetching the data from database.
From the following code :
If the where condition is removed then the application runs fine but i am still not able to fetch the data from the table because it is not showing any output.
Can anyone please suggest me that how to write WHERE statement correctly and how i will be able to see the output.
Following is the config.xml for processor:
======================================
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
     xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
     <processor>
          <name>JDBC_Processor</name>
          <rules>
               <query id="q1"><![CDATA[
                         SELECT STOCK.SYMBOL as symbol, STOCK.EXCHANGE as exchange
                         FROM ExchangeStream [Now] as datastream, STOCK
                         WHERE datastream.SYMBOL = datastream.SYMBOL ]]></query>
          </rules>
     </processor>
     <jms-adapter>
          <name>JMS_IN_Adapter</name>
          <jndi-provider-url>t3://CHDSEZ135400D:7001</jndi-provider-url>
          <destination-jndi-name>jms.TestKanikaQueue</destination-jndi-name>
          <user>weblogic</user>
          <password>welcome1</password>
     </jms-adapter>
</wlevs:config>
Following is the assembly file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:osgi="http://www.springframework.org/schema/osgi"
     xmlns:wlevs="http://www.bea.com/ns/wlevs/spring" xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
     xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
     xsi:schemaLocation="
          http://www.springframework.org/schema/beans
          http://www.springframework.org/schema/beans/spring-beans.xsd
          http://www.springframework.org/schema/osgi
          http://www.springframework.org/schema/osgi/spring-osgi.xsd
          http://www.bea.com/ns/wlevs/spring
          http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
          http://www.oracle.com/ns/ocep/jdbc
          http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
          http://www.oracle.com/ns/ocep/spatial
          http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="StockEvent">
               <wlevs:properties>
                    <wlevs:property name="SYMBOL" type="byte[]" length="16" />
                    <wlevs:property name="EXCHANGE" type="byte[]" length="16" />
               </wlevs:properties>
          </wlevs:event-type>
          <wlevs:event-type type-name="ExchangeEvent">
               <wlevs:class>com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent</wlevs:class>
          </wlevs:event-type>
          <wlevs:event-type type-name="StockExchangeEvent">
               <wlevs:properties>
                    <wlevs:property name="symbol" type="byte[]" length="16" />
                    <wlevs:property name="price" type="byte[]" length="16" />
                    <wlevs:property name="exchange" type="byte[]" length="16" />
               </wlevs:properties>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <bean id="readConverter" class="com.bea.wlevs.adapter.example.JDBC_CEP.Adapter_JDBC" />
     <bean id="outputJDBCBean" class="com.bea.wlevs.bean.example.JDBC_CEP.OutputBean_JDBC">
     </bean>
     <wlevs:adapter id="JMS_IN_Adapter" provider="jms-inbound">
          <wlevs:listener ref="ExchangeStream" />
          <wlevs:instance-property name="converterBean"
               ref="readConverter" />
     </wlevs:adapter>
     <wlevs:processor id="JDBC_Processor" advertise="true">
          <wlevs:listener ref="OutputChannel" />
          <wlevs:table-source ref="STOCK" />
     </wlevs:processor>
     <wlevs:channel id="ExchangeStream" event-type="ExchangeEvent" advertise="true">
          <wlevs:listener ref="JDBC_Processor" />
     </wlevs:channel>
     <wlevs:channel id="OutputChannel" event-type="StockExchangeEvent"
          advertise="true">
          <wlevs:listener ref="outputJDBCBean" />
     </wlevs:channel>
     <wlevs:table id="STOCK" event-type="StockEvent"
          data-source="StockDs" table-name="STOCK" />
     <wlevs:table id="STOCK_EXCHANGE" event-type="StockExchangeEvent"
          data-source="StockDs" table-name="STOCK_EXCHANGE" />
</beans>
ExchangeEvent.java:
package com.bea.wlevs.event.example.JDBC_CEP;
public class ExchangeEvent {
     public String SYMBOL;
     public String symbol;
     public String exchange;
     public ExchangeEvent() {
     public String getSYMBOL() {
          return SYMBOL;
     public void setSYMBOL(String sYMBOL) {
          SYMBOL = sYMBOL;
     public String getSymbol() {
          return symbol;
     public void setSymbol(String symbol) {
          this.symbol = symbol;
     public String getExchange() {
          return exchange;
     public void setExchange(String price) {
          this.exchange = price;
Adapter Class:
package com.bea.wlevs.adapter.example.JDBC_CEP;
import com.bea.wlevs.adapter.example.JDBC_CEP.MyLogger;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import java.text.DateFormat;
import java.util.Date;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.TextMessage;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
     public class Adapter_JDBC implements InboundMessageConverter{
     @SuppressWarnings("unchecked")
     public List convert(Message message) throws MessageConverterException, JMSException {
          Random rand = new Random();
          int unique_id = rand.nextInt();
          DateFormat dateFormat;
          dateFormat = DateFormat.getTimeInstance();
          dateFormat.format(new Date());
          MyLogger.info(unique_id + " CEP Start Time is: " + dateFormat.format(new Date()));
          System.out.println("Message from the Queue is :"+ message);
          TextMessage textMessage = (TextMessage) message;
          String stringMessage = textMessage.getText().toString();
          System.out.println("Message after getting converted into String is :"+ stringMessage);
               String[] results = stringMessage.split(",\\s*"); // split on commas
               ExchangeEvent event1 = new ExchangeEvent();
               event1.setSYMBOL(results[0]);
     List events = new ArrayList(2);
     events.add(event1);
     return events;
Output Bean Class :
package com.bea.wlevs.bean.example.JDBC_CEP;
import com.bea.wlevs.ede.api.StreamSink;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import com.bea.core.datasource.DataSourceService;
public class OutputBean_JDBC implements StreamSink{
     public void onInsertEvent(Object event) {
     if (event instanceof ExchangeEvent) {
          ExchangeEvent cacheEvent = (ExchangeEvent) event;
     System.out.println("Symbol is: " + cacheEvent.getSymbol());
     System.out.println("Exchange is: " + cacheEvent.getExchange());
     System.out.println(DataSourceService.class.getClass());
Kindly let me know if you need further info.

Do you have StockDs configured in your server config.xml?
I think the query should look more like this:
SELECT stocks.SYMBOL, stocks.EXCHANGE
FROM STOCK as stocks, ExchangeStream [Now] as datastream WHERE stocks.SYMBOL = datastream.SYMBOL
Thanks
andy

How to Fetch a data from HR Master Tables?

HI,
For all employees who have Infotype 0194 records valid in the time period or payroll period selected who have the vendor selected on the selection screen, you have to read the payroll results and find the Garnishment document in the GRORD if it exists. If a time period is selected, you must search for all payroll results with a check date that falls in that time period. If a payroll period is selected, search for that particular payroll and any off-cycle payroll whose check date falls between the begin date and end date of that pay period.
Once you searched IT 0194 for Employees (EE) with the Garnishment Vendor selected and then found the payroll results to process, you must search through payroll internal GRDOC and find the same vendor. If the vendor is found, search the payroll Results Table (RT) for the V0 split which matches the GRDOC record. Then use this amount(s) for the Deduction Amount field.
I have to fetch the Deduction amount according to the given Scenario,and I have to create an Outbound Interface Program to which creates an TXt file in Client Application server with Required fields
Case Number:
P0194-GCASE
Social Security Number:
P0002-PERID
Employee First Name:
P0002-VORNA
Employee Last Name:
P0002-NACHN
Deduction Amount:
Payroll Results RT
Can any one pls know me the entire procedure how to fetch the deduction amt based on the given scenario and what r the select statements i have to write to fetch required fields listed above.

to provide infotype data you should use logical database PNP (see docu there)
that will create a selection screen by default.
In your report you have to specify
TABLES: PERNR.
INFOTYPES: 0002, 0194, ....
start-of-selection.
get pernr.
here you get all the specified infotypes in tables pxxxx
end-of-selection. " ends processing one pernr and starts with next GET PERNR
there is a function module to read payroll results
PYXX_READ_PAYROLL_RESULT
in your report you have to initialize the buffers first
HR_PCLX_INIT_BUFFER
and then get the cluster directory (RGDIR)
CU_READ_RGDIR

How to fetch published data from portal using ABAP

Hello,
I have a file published in the portal (with broadcaster). Now I want to use this file in an ABAP program. I can't call the web address directly because my program can't handle the Portal authentication. So I have two questions:
- is there any way to call Portal-websites which require authentication from ABAP?
or
- how can I directly get access to the file without detour over the Portal (where is the place in file system).
Thank you very much!
Martin

Hello Adrian,
Thank you very much for your reply.
> You can publish the report in MHTML format using the
> BEx Broadcaster to a mapped drive (completely
> independent of the portal) then you could pick this
> up from your ABAP program if you have access to that
> share.
What do you mean with "mapped drive" - <a href="http://http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/e915d951f23ee0e10000000a1553f6/frameset.htm">this</a>? I guess I could choose this drive in broadcaster at "export document in any folder" (don't know exactly English label because my system is in German language...)?
> I dont really see the value of publishing the report
> to KM if all you are wanting to do is read this back
> into your ABAP program. Why are you wanting to
> publish the report to the portal in the first place?
I need to get the image of a BW-chart in ABAP because I want to use it in SAP Interactive Forms by Adobe (I have an ABAP program to fetch my data and create the form). I could create my own chart of the data with the Internet Graphics Service but this would be a lot of work. You can create this charts very easily using the Chart Designer which i.e. is included in the Web Application Designer. If you create a Web Site containing a chart you can access this via browser and you have the chart as an image (created from current data). I tried simply to call this website with ABAP but I can not "log in" and so I have no access to this page. Because of this I had the idea to use the broadcaster to automatically publish this Web Application when my data were updated. If I use MHTML my chart-image is saved separately. This just would work for me. And now I want to get this image as a binary with ABAP.
I hope you understand my problem.
Martin

How to create a data load file from Excel !!!

Hi All,
I'm new to HFM and would like to load data into an HFM application. As I have an Excel file with all the data. When I'm directly loading the data it throws an error saying "No section has been specified to determine if this is data, description or line item detail". How can I convert this excel file into proper format (.dat) file understandable by HFM ?

There are several ways to get this data into HFM.
1) FDM - best option if you have it
2) Webforms/Data Grids
3) HsSetValue formulas in Excel
4) DAT file loads
5) JVs, etc
If you wish to use DAT files created via Excel, you will likely want to use Excel VBA macros to create your DAT file to load. We do this on occasion for special projects and it works quite well. What you can do is set up an Excel file with your data inputs to look however you want, then link your POV members and amounts to another tab (we commonly call this the Export tab and it is set up in an HFM-friendly format).
Create a macro to write a DAT file to a specified location using data from the Export tab. The DAT file will need to be formatted as below. For a specific sample, you can extract data from your HFM app and see the format.
!Data
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Scenario;Year;Period;View;Entity;Value;Account;ICP;Custom1;Custom2;Custom3;Custom4;Amount
Brush up on Replace, Merge, or Accumulate load options in the HFM Admin and User Guides, then upload your new DAT file.

How to fetch NO DATA FOUND exception in Ref Cursor.

In my procedure ref cursor is out parameter with returns dataset. in my proceudre
its like...
OPEN pPymtCur FOR
select.....
when I call this procedure from report to get dataset it causes NO DATA FOUND exception.
How to fetch this exception in my oracle procedure so I can get some other data.
Any Idea to do this?
Edited by: Meghna on 17-Jun-2009 22:28

Mass25 wrote:
Correct me if I am wrong.
So if I do something as follows in my stored proc, I do not have to check for NO_DATA_FOUND?
OPEN my_CuRSR FOR
SELECT DISTINCT blah blah blahmy_cursr is what I am returning as OUT param in my SP.Correct. At the point you open the cursor, oracle has not attempted any 'fetch' against the data so it won't know if there is any data or no data. that only occurs when a fetch is attempted.
Take a read of this:
[PL/SQL 101 : Understanding Ref Cursors|http://forums.oracle.com/forums/thread.jspa?threadID=886365&tstart=0]

How to Fetch the Data from a Cube

Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi Krishna

Hey I got the Solution. It follows in this way :
A Cube is nothing but a Data Storage. Based on the Mapping we given it considers the data.
To fetch the data from the Cube -> we have to write the SQl Query as below :
     SELECT dealer_name,model_name,sales
     FROM TABLE(OLAP_TABLE('MDB.FINAL_AW DURATION SESSION',
     'DIMENSION dealer_name AS varchar2(30) FROM FINALDEAL
     DIMENSION model_name AS varchar2(30) FROM FINALMODEL'));
We can create View for the above statement o
we can apply group by ,rollup, etc etc clauses
and even we can write where clauses for the above select statement.
But now my doubt is :
can we apply any calculations while mapping the Level to an Dimension.
Generally we will map Level toa dimension as DBUSER.TABLENAME.COLUMN NAME
can we apply any calculation like :
MIS.PROPKEY020MB.MATURITY_DATE+2
Please help for the above.
If any wrong is there please let me know
Regards,
S.Vamsi Krishna
can we apply

How to use a data link file (UDL)

Hi,
several times I developed applications using Crystal Reports 2008 which used a data base on my development PC and when I deployed them on a production server I had the problem to change the Data Source Location to reflect the new Server name and SQL Server Instance. Moreover, this had to be done on the server, because CR 2008 check the new data source location when you change it, and because I was not connected to the server I couldn't do it on my development pc.
I thought that the data link file was the solution to this problem, meaning that CR2008 could use a data link file (UDL file) as a data source location, so when deploying the reports on the server I had only to point the data link file to the new server instance.
With my surprise, I have seen that when using a data link file to define the data source in CR 2008, it copies the definition found in it, instead of using it at run time. SO when I deploy the reports on the server I still have the same problem to change the data source location for all the reports.
Perhaps I didn't understand the data link file use. So, how do I solve the problem of using a data source location that can be valid when deploying the reports on a server?
Thanks

Hi Antonio,
Go to our download page above, there you will find samples to test with:
http://www.sdn.sap.com/irj/boc/samples
Or to .NET samples: http://www.sdn.sap.com/irj/boc/samples?rid=/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375 [original link is broken]
Find any of them that sets database location/log on.
Thank you
Don

How do I delete data (mail, files, photos, etc) from iCloud?

I'd like to stay below 5Gb on my iCloud account. How can I delete data from ICloud once it's there? For instance, once I've transferred files from my iMac to iPad (or downloaded and deleted Mail from both) do these data accumulate on my iCloud account, or can I selectively delete some. A corollary question is whether synched data, such as mail, is automatically deleted from iCloud if I delete it from all synched devices. Thanks!

It appears you cannot delete
https://discussions.apple.com/thread/3104002?start=0&tstart=0

How t o make data in file as tab delimited..

Hi frndz,
How to make data in file as tab delimited.

For tab delimiting pl use the following snippet..I guess you are aware of the rest of the stuff..
data: w_tab type c value cl_abap_char_utilities=>horizontal_tab,
rec_file type string.
concatenate <fld1> <fld2> ...<fldn> into rec_file
separated by w_tab.
~Suresh

How to fetch encrupted data in file

Similar Messages

Maybe you are looking for