How to fetch published data from portal using ABAP
Hello,
I have a file published in the portal (with broadcaster). Now I want to use this file in an ABAP program. I can't call the web address directly because my program can't handle the Portal authentication. So I have two questions:
- is there any way to call Portal-websites which require authentication from ABAP?
or
- how can I directly get access to the file without detour over the Portal (where is the place in file system).
Thank you very much!
Martin
Hello Adrian,
Thank you very much for your reply.
> You can publish the report in MHTML format using the
> BEx Broadcaster to a mapped drive (completely
> independent of the portal) then you could pick this
> up from your ABAP program if you have access to that
> share.
What do you mean with "mapped drive" - <a href="http://http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/e915d951f23ee0e10000000a1553f6/frameset.htm">this</a>? I guess I could choose this drive in broadcaster at "export document in any folder" (don't know exactly English label because my system is in German language...)?
> I dont really see the value of publishing the report
> to KM if all you are wanting to do is read this back
> into your ABAP program. Why are you wanting to
> publish the report to the portal in the first place?
I need to get the image of a BW-chart in ABAP because I want to use it in SAP Interactive Forms by Adobe (I have an ABAP program to fetch my data and create the form). I could create my own chart of the data with the Internet Graphics Service but this would be a lot of work. You can create this charts very easily using the Chart Designer which i.e. is included in the Web Application Designer. If you create a Web Site containing a chart you can access this via browser and you have the chart as an image (created from current data). I tried simply to call this website with ABAP but I can not "log in" and so I have no access to this page. Because of this I had the idea to use the broadcaster to automatically publish this Web Application when my data were updated. If I use MHTML my chart-image is saved separately. This just would work for me. And now I want to get this image as a binary with ABAP.
I hope you understand my problem.
Martin
Similar Messages
-
How to Fetch the Data from a Cube
Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi KrishnaHey I got the Solution. It follows in this way :
A Cube is nothing but a Data Storage. Based on the Mapping we given it considers the data.
To fetch the data from the Cube -> we have to write the SQl Query as below :
SELECT dealer_name,model_name,sales
FROM TABLE(OLAP_TABLE('MDB.FINAL_AW DURATION SESSION',
'DIMENSION dealer_name AS varchar2(30) FROM FINALDEAL
DIMENSION model_name AS varchar2(30) FROM FINALMODEL'));
We can create View for the above statement o
we can apply group by ,rollup, etc etc clauses
and even we can write where clauses for the above select statement.
But now my doubt is :
can we apply any calculations while mapping the Level to an Dimension.
Generally we will map Level toa dimension as DBUSER.TABLENAME.COLUMN NAME
can we apply any calculation like :
MIS.PROPKEY020MB.MATURITY_DATE+2
Please help for the above.
If any wrong is there please let me know
Regards,
S.Vamsi Krishna
can we apply -
How to fetch the data from databse table and get the required output
Hi,
I have made a project that connects CEP to database table but i m getting some problem in fetching the data from database.
From the following code :
If the where condition is removed then the application runs fine but i am still not able to fetch the data from the table because it is not showing any output.
Can anyone please suggest me that how to write WHERE statement correctly and how i will be able to see the output.
Following is the config.xml for processor:
======================================
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
<processor>
<name>JDBC_Processor</name>
<rules>
<query id="q1"><![CDATA[
SELECT STOCK.SYMBOL as symbol, STOCK.EXCHANGE as exchange
FROM ExchangeStream [Now] as datastream, STOCK
WHERE datastream.SYMBOL = datastream.SYMBOL ]]></query>
</rules>
</processor>
<jms-adapter>
<name>JMS_IN_Adapter</name>
<jndi-provider-url>t3://CHDSEZ135400D:7001</jndi-provider-url>
<destination-jndi-name>jms.TestKanikaQueue</destination-jndi-name>
<user>weblogic</user>
<password>welcome1</password>
</jms-adapter>
</wlevs:config>
Following is the assembly file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring" xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
<wlevs:event-type-repository>
<wlevs:event-type type-name="StockEvent">
<wlevs:properties>
<wlevs:property name="SYMBOL" type="byte[]" length="16" />
<wlevs:property name="EXCHANGE" type="byte[]" length="16" />
</wlevs:properties>
</wlevs:event-type>
<wlevs:event-type type-name="ExchangeEvent">
<wlevs:class>com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent</wlevs:class>
</wlevs:event-type>
<wlevs:event-type type-name="StockExchangeEvent">
<wlevs:properties>
<wlevs:property name="symbol" type="byte[]" length="16" />
<wlevs:property name="price" type="byte[]" length="16" />
<wlevs:property name="exchange" type="byte[]" length="16" />
</wlevs:properties>
</wlevs:event-type>
</wlevs:event-type-repository>
<bean id="readConverter" class="com.bea.wlevs.adapter.example.JDBC_CEP.Adapter_JDBC" />
<bean id="outputJDBCBean" class="com.bea.wlevs.bean.example.JDBC_CEP.OutputBean_JDBC">
</bean>
<wlevs:adapter id="JMS_IN_Adapter" provider="jms-inbound">
<wlevs:listener ref="ExchangeStream" />
<wlevs:instance-property name="converterBean"
ref="readConverter" />
</wlevs:adapter>
<wlevs:processor id="JDBC_Processor" advertise="true">
<wlevs:listener ref="OutputChannel" />
<wlevs:table-source ref="STOCK" />
</wlevs:processor>
<wlevs:channel id="ExchangeStream" event-type="ExchangeEvent" advertise="true">
<wlevs:listener ref="JDBC_Processor" />
</wlevs:channel>
<wlevs:channel id="OutputChannel" event-type="StockExchangeEvent"
advertise="true">
<wlevs:listener ref="outputJDBCBean" />
</wlevs:channel>
<wlevs:table id="STOCK" event-type="StockEvent"
data-source="StockDs" table-name="STOCK" />
<wlevs:table id="STOCK_EXCHANGE" event-type="StockExchangeEvent"
data-source="StockDs" table-name="STOCK_EXCHANGE" />
</beans>
ExchangeEvent.java:
package com.bea.wlevs.event.example.JDBC_CEP;
public class ExchangeEvent {
public String SYMBOL;
public String symbol;
public String exchange;
public ExchangeEvent() {
public String getSYMBOL() {
return SYMBOL;
public void setSYMBOL(String sYMBOL) {
SYMBOL = sYMBOL;
public String getSymbol() {
return symbol;
public void setSymbol(String symbol) {
this.symbol = symbol;
public String getExchange() {
return exchange;
public void setExchange(String price) {
this.exchange = price;
Adapter Class:
package com.bea.wlevs.adapter.example.JDBC_CEP;
import com.bea.wlevs.adapter.example.JDBC_CEP.MyLogger;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import java.text.DateFormat;
import java.util.Date;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.TextMessage;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
public class Adapter_JDBC implements InboundMessageConverter{
@SuppressWarnings("unchecked")
public List convert(Message message) throws MessageConverterException, JMSException {
Random rand = new Random();
int unique_id = rand.nextInt();
DateFormat dateFormat;
dateFormat = DateFormat.getTimeInstance();
dateFormat.format(new Date());
MyLogger.info(unique_id + " CEP Start Time is: " + dateFormat.format(new Date()));
System.out.println("Message from the Queue is :"+ message);
TextMessage textMessage = (TextMessage) message;
String stringMessage = textMessage.getText().toString();
System.out.println("Message after getting converted into String is :"+ stringMessage);
String[] results = stringMessage.split(",\\s*"); // split on commas
ExchangeEvent event1 = new ExchangeEvent();
event1.setSYMBOL(results[0]);
List events = new ArrayList(2);
events.add(event1);
return events;
Output Bean Class :
package com.bea.wlevs.bean.example.JDBC_CEP;
import com.bea.wlevs.ede.api.StreamSink;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import com.bea.core.datasource.DataSourceService;
public class OutputBean_JDBC implements StreamSink{
public void onInsertEvent(Object event) {
if (event instanceof ExchangeEvent) {
ExchangeEvent cacheEvent = (ExchangeEvent) event;
System.out.println("Symbol is: " + cacheEvent.getSymbol());
System.out.println("Exchange is: " + cacheEvent.getExchange());
System.out.println(DataSourceService.class.getClass());
Kindly let me know if you need further info.Do you have StockDs configured in your server config.xml?
I think the query should look more like this:
SELECT stocks.SYMBOL, stocks.EXCHANGE
FROM STOCK as stocks, ExchangeStream [Now] as datastream WHERE stocks.SYMBOL = datastream.SYMBOL
Thanks
andy -
How to fetch the data from Ecc to BI ?
Hi everybody.
Can anyone briefly explain with the screen shots > How to fetch the datasource from RSA5 tcode in ECC to BI? How you replicate there? how the INFO PACKAGE , TRANSFORMATIONS, DTP , DSO, INFO CUBE was created? where we see the catalogs for this data.......THANKS IN ADVANCEHi.
You can follow the below steps to fetch the data from ECC to BI System.
1>Connection should be there between ECC and BW System.
2>Go to Tcode-RSA5 in ECC system and find your data source and then activate it.
3> Go to Tcode-RSA6 in ECC system to check whether your DS is available..if it is there then its been activated.
4>Go to Extract Checker tcode RSA3 and test the data and make sure data is correct.
5>login to BW Side..go to tcode RSA1-->Choose your source system. ECC -> double click on it and you will move to Data source>Select your Application component ex, SD,FI ...>Right click and replicate the Datasouce> Now on refresh you can see the datasource in BI System.
6>Install the related the Infoprovider .. cube or dso ..Connect the datasouurce and create Transformation.
7> Now create infopackage and run it in ful & init mode then do the delta for the new records.
Please refer the below link for more details on extraction.
http://www.trinay.com/SAP%20BW%20Extraction.pdf
Hope this helps.
Br.
Alok -
Read data from SharePoint using ABAP sql command
We need to read data from a SharePoint site and update the sap object services with the information. There is a lot of information on how to put data into Sharepoint from SAP, but we need to get data from SharePoint and put it into SAP. Is it possible to retrieve data from SharePoint using sql command in ABAP program? If it is possible, what do we need to do to have SAP recognize where to get the SharePoint data?
Richard NewmanHi Newman,
You can use native sql in your abap code to read data from SharePoint's database. But I would suggest you to generate a SharePoint webservice which can provide you the neccessary data so that you can consume this webservice in ABAP
(Will be quite faster than native sql).
Regards,
Ozcan. -
Extraction of Data from ECC using ABAP Stage in Datastage
Hi
We are required to extract the customer master data from GFIMS SAP ECC5.0 system. This extraction involves fetching of data from 5 different tables. To attain this we are using ABAP stage in DATASTAGE.
For every run the ABAP stage of DataStage generates the ABAP program in DataStage, will place it in the SAP system and extract the data by executing the ABAP program.
To be able to use this ABAP stage we need to integrate the DataStage with SAP system. We have to send the cofiles and data files to SAP, these files will install a RFC enabled function module and user profile components in SAP.
They say, there is a security flaw in the function module component and this will lead to exposing of complete SAP system to outside members.
Please advise me to do alternative Ways.
Thanks in Advance.Hi
You dont see the data source in R3? When you created the data source using Tcode RSO2 you would have put the data source under some application like SD, MM etc.
Please check in the respective application for your data source. If still the data source is still not seen, then check whether the data source is active or not.
Hope it helps.
Regards
Sadeesh -
Please Help - How to Fetch the Data from a Cube
Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi KrishnaYou appear to have the wrong forum. This forum is for the Oracle Workspaces application, which is a component of Oracle Collaboration Suite.
Perhaps one of the forums in the database section will be more relevant:
http://forums.oracle.com/forums/category.jspa?categoryID=18
regards,
-Neil. -
How to fetch the data from a pl/sql table and varray, with some example
I want to fetch the data using a cursor from Pl/sql table and varry and I want to update the data.
Please provide me some example.PL/SQL Table - please note that, right term is Associative Array.
Presumably you are referring to the 'often heated' back-and-forth that sometimes goes on in the forums when people refer to ANY PL/SQL type using a term with the word 'table' in it?
Curious that you then show an example of a nested table!
type emp_tab is table of employees%rowtype;
The 'right term' for that is 'nested table'. The following would be an 'associative array' or 'index-by table'
type emp_tab is table of employees%rowtype INDEX BY PLS_INTEGER;
Those used to be called 'PL/SQL tables' or 'index-by tables' but 'associative array' is the current term used.
Associative Arrays
An associative array (formerly called PL/SQL table or index-by table) is a set of key-value pairs. Each key is a unique index, used to locate the associated value with the syntax variable_name(index).
The data type of index can be either a string type or PLS_INTEGER.
Since the Oracle docs often use 'PL/SQL table' or 'index-by table' it isn't unusual for someone asking a question to use those terms also. Technically the types may not be 'tables' but it's clear what they mean when they use the term.
In PL/SQL the term 'nested table' is still used even though the PL/SQL collection is not really a table. SQL does have nested tables where the data is actually stored in a table. The PL/SQL 'nested table' type can be used as the source/destination of the SQL data from a nested table so that may be why Oracle uses that term for the PL/SQL type.
The doc that SKP referenced refers to this use:
Nested Tables
In the database, a nested table is a column type that stores an unspecified number of rows in no particular order. When you retrieve a nested table value from the database into a PL/SQL nested table variable, PL/SQL gives the rows consecutive indexes, starting at 1. -
Hi,
I would like to retrive the data from the table COEP ,based on KOKRS,BELNR fields.
I need the output for Cost centre, cost element, wbs element,net work ,activity.
These values are storing OBJNR ,OBJNAR_1,OBJNR_2,OBJNR_N3.
But here always these field are not giving the correct values.
for example : for one record COST CENTRE vlaue is storing in OBJNR_1 field,
for one record COST CENTRE vlaue is storing in OBJNR_2 field,
for one record COST CENTRE vlaue is storing in OBJNR_3 field.
Here SAP has used a generic approach for this.
How can I dispaly the values in this case ?
Thanks and Regards
Srinivas.NHi,
I am asking, how can we say OBJNR_1 value alwyas belongs to cost center ?
USPOB is not filling always. -
How to Fetch a data from HR Master Tables?
HI,
For all employees who have Infotype 0194 records valid in the time period or payroll period selected who have the vendor selected on the selection screen, you have to read the payroll results and find the Garnishment document in the GRORD if it exists. If a time period is selected, you must search for all payroll results with a check date that falls in that time period. If a payroll period is selected, search for that particular payroll and any off-cycle payroll whose check date falls between the begin date and end date of that pay period.
Once you searched IT 0194 for Employees (EE) with the Garnishment Vendor selected and then found the payroll results to process, you must search through payroll internal GRDOC and find the same vendor. If the vendor is found, search the payroll Results Table (RT) for the V0 split which matches the GRDOC record. Then use this amount(s) for the Deduction Amount field.
I have to fetch the Deduction amount according to the given Scenario,and I have to create an Outbound Interface Program to which creates an TXt file in Client Application server with Required fields
Case Number:
P0194-GCASE
Social Security Number:
P0002-PERID
Employee First Name:
P0002-VORNA
Employee Last Name:
P0002-NACHN
Deduction Amount:
Payroll Results RT
Can any one pls know me the entire procedure how to fetch the deduction amt based on the given scenario and what r the select statements i have to write to fetch required fields listed above.to provide infotype data you should use logical database PNP (see docu there)
that will create a selection screen by default.
In your report you have to specify
TABLES: PERNR.
INFOTYPES: 0002, 0194, ....
start-of-selection.
get pernr.
here you get all the specified infotypes in tables pxxxx
end-of-selection. " ends processing one pernr and starts with next GET PERNR
there is a function module to read payroll results
PYXX_READ_PAYROLL_RESULT
in your report you have to initialize the buffers first
HR_PCLX_INIT_BUFFER
and then get the cluster directory (RGDIR)
CU_READ_RGDIR -
How to fetch latest data from database instead of clicking on Generate report in RSRT?
Hi all,
We are not able to get latest data of BEx query.Everytime we have to click on Generate Report button in RSRT for getting latest value.
Is there any way to get latest value automatically? We are not doing any changes in query.
When we click on Generate Report it is fetching data from Database instead of cache,so if it is possible to disable cache or any other workaround?
We have used time(0TIME) characteristic in query as a formula variable. We have applied a condition on that variable to fetch the first record (latest value). When we click on generate report, it fetches correct value with latest time but when we run the query without generate report, it is not fetching latest value. The cube on which this query is developed, is a realtime cube.
Regards,
ZalakOnce its in the request attributes it would be far better to use JSP Expression Language as well as the JSTL that Malcolm suggested So if the servlet code said:
request.setAttribute("myList", al);Then using EL and the JSTL tags from <%@taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> the JSP would look something like:
<c:forEach items="${myList}" var="user">
<TR>
<TD><c:out value="${user.name}" /></TD>
<TD><c:out value="${user.fname}" /></TD>
<TD><c:out value="${user.city}" /></TD>
<TD><c:out value="${user.cont}" /></TD>
<TD><c:out value="${user.age}" /></TD>
</TR>
</c:forEach> -
How to Fetch the Data from Screen(Structure) Leval
Hi,
In HR I have to retrive some fields from Screen leval ..Ex.Q0002..genaraly we are able to retrive the
data from PA0002.
in this Scenari how can i fetch data from Q0002.
Thanks in Advanceyou can check the below code for this .
DATA: BEGIN OF DYNP_VALUES OCCURS 10.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF DYNP_VALUES.
DATA : HELP_val TYPE Pxxxx-abcde.
REFRESH DYNP_VALUES.
DYNP_VALUES-FIELDNAME = 'PXXXX-ABCDE'.
APPEND DYNP_VALUES.
* read screen values
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = DYNP_VALUES
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC EQ 0.
SORT DYNP_VALUES BY FIELDNAME.
READ TABLE DYNP_VALUES WITH KEY 'PXXXX-ABCDE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
HELP_VAL = DYNP_VALUES-FIELDVALUE.
ENDIF.
ENDIF.
just check if this code is working for u .
br,
vijay. -
How to fetch the data from pl/sql table dynamically
Hi All, I have the requirement of comparing two db views data in pl/sql. So, I have bulk collect the view into pl/sql table. But, the issue is, It is expecting to provide the column name for comparison. But, in my case, column name is dynamic. So, i cannot provide the column name directly for comparison.
For eg: In my view t1_VW, i have 4 columns. stid, c1,c2,c3,c4 and similar structure for t2_vw
my code
TYPE v1_type IS TABLE OF t1_vw%ROWTYPE;
l_data v1_type;
TYPE v1_type1 IS TABLE OF t2_vw%ROWTYPE;
l_data1 v1_type1;
test varchar2(1000);
test1 varchar2(1000);
temp1 number;
begin
SELECT * Bulk collect into l_data
FROM T1_VW;
SELECT * Bulk collect into l_data1
FROM T2_VW;
select l_data(1).stid into temp1 from dual; -- It is working fine and gives me the value properly
-- But, in my case, we are reading the column names from array, i am constructing the query dynamically and execute it.
test :='select l_data(1).stid into temp1 from dual';
execute immediate test into temp1;
-- I am getting error as follows:
Error report:
ORA-00904: "L_DATA": invalid identifier
ORA-06512: at "SYSTEM.BULKCOMPARISON", line 93
ORA-06512: at line 2
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action
end;
- Please help me to get rid of this issue. Is it possible to construct the query dynamically and fetch the data?. If not, is there any other better approach to compare the data between two views?.Output should display what are all columns changed and its old value and new value.
For eg., output should be
COLUMNNAME OLD_VALUE NEW_VALUE STID
C1 20 10 1
C2 50 40 2
C3 60 70 2
C2 80 90 3Why no do this only via a simple sql ?
create table a (STID number, C1 number, C2 number, C3 number);
insert into a values (1, 20, 30, 40)
insert into a values (2, 40, 50, 60);
insert into a values (3, 90, 80, 100);
create table b as select *
from a where 1 = 0;
insert into b values (1, 10, 30, 40)
insert into b values (2, 40, 40, 70);
insert into b values (3, 90, 90, 100);
commit;And now you can issue such a kind of select
SELECT stid , c1, c2, c3
FROM
( SELECT a.*,
1 src1,
to_number(null) src2
FROM a
UNION ALL
SELECT b.*,
to_number(null) src1,
2 src2
FROM b
GROUP BY stid , c1, c2, c3
HAVING count(src1) <> count(src2)
order by stid;I would then create a new table a_b_difference having the same structure as a or b and insert into it like this
create table a_b_diff as select * from a where 1 = 0;
insert into a_b_diff
SELECT stid , c1, c2, c3
FROM
( SELECT a.*,
1 src1,
to_number(null) src2
FROM a
UNION ALL
SELECT b.*,
to_number(null) src1,
2 src2
FROM b
GROUP BY stid , c1, c2, c3
HAVING count(src1) <> count(src2)
order by stid
;Then each time there is a difference between a column in a and its equivalente one in b (per unique stid ) a record will be inserted in this table.
You can do more by adding the name of the table in front of each record in this table to see exactly where the data comes from
Best Regards
Mohamed Houri -
How to fetch the data from query to internal table ?
Dear all ,
I would like to fetch the query data(sq01) into my internal table ? is it possible to do that ?
Best Regards,
CarlosHi
Try this <b>RRW3_GET_QUERY_VIEW_DATA</b>
Also, you can have a look at this...
<a href="/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii Query results into Internal table</a>
Regards
Raj -
How to fetch the data from a standard report to a user defined report
Hi,
i m using a standard report RFEBKA00 which uses CHAR300 variable(it is not used in selection screen).
can u help me ,
to collect the data from CHAR300 and to use it in my own report.
Message was edited by:
jaya ramanhi jayaramm..
you have to use SUBMMIT and send the parameters of your selection screen to the standard submmit prorgram...
beliow is the program for you .... just pick the selection parameter and pass corresponding parameter in the Submit which i mention as ...... replace with = and parameter in the selection screen.
report zrsers.
INCLUDE rfebka03.
INCLUDE rfebfr03. " Data France
INCLUDE RFEKAP00. "n927883
TABLES: rfsdo,
sscrfields,
hrdeaoifld.
DATA: lt_statements TYPE STANDARD TABLE OF fieb_kukey,
l_statement TYPE fieb_kukey.
*Daten für die Mahnsperre "mo260105
TYPES: BEGIN OF s_kukey_mansp,
sign(1),
option(2),
low TYPE kukey_eb,
high TYPE kukey_eb,
mansp TYPE mansp,
anztg TYPE anztg,
bukrs TYPE bukrs,
END OF s_kukey_mansp.
DATA: lt_kukey TYPE STANDARD TABLE OF s_kukey_mansp,
l_kukey LIKE LINE OF lt_kukey,
l_gjahr TYPE gjahr,
LT_GJAHR TYPE STANDARD TABLE OF GJAHR,
L_MANSP TYPE MANSP,
l_kunnr TYPE kunnr,
l_lifnr TYPE lifnr.
FIELD-SYMBOLS: <mansp> LIKE LINE OF gt_mansp.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-165.
PARAMETERS: einlesen LIKE rfpdo1-febeinles,
format LIKE rfpdo1-febformat DEFAULT 'M' AS
LISTBOX VISIBLE LENGTH 30 USER-COMMAND bai,
AUSZFILE LIKE RFPDO1-FEBAUSZF,
umsfile LIKE rfpdo1-febumsf,
pcupload LIKE rfpdo1-febpcupld DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK 1.
*------- Buchungsparameter ---------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 2 WITH FRAME TITLE text-160.
*SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_xcall TYPE febpdo-xcall RADIOBUTTON GROUP 1.
*SELECTION-SCREEN
* COMMENT 03(29) FOR FIELD pa_xcall.
PARAMETERS: pa_xbkbu TYPE febpdo-xbkbu.
*SELECTION-SCREEN
* COMMENT 35(16) text-171 FOR FIELD pa_xbkbu.
PARAMETERS: pa_mode TYPE rfpdo-allgazmd NO-DISPLAY.
*SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_xbdc LIKE febpdo-xbinpt RADIOBUTTON GROUP 1.
SELECTION-SCREEN
COMMENT 03(29) text-163 FOR FIELD pa_xbdc.
SELECTION-SCREEN
COMMENT 35(20) text-164 FOR FIELD mregel.
PARAMETERS: mregel LIKE rfpdo1-febmregel DEFAULT '1'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
PARAMETERS: pa_test LIKE rfpdo1-febtestl RADIOBUTTON GROUP 1.
SELECTION-SCREEN
COMMENT 03(29) text-168 FOR FIELD pa_test.
SELECTION-SCREEN: END OF LINE.
PARAMETERS: valut_on LIKE rfpdo2-febvalut DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK 2.
*------- Finanzdisposition ---------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 5 WITH FRAME TITLE text-172.
SELECTION-SCREEN: BEGIN OF LINE.
PARAMETERS: pa_xdisp LIKE febpdo-xdisp.
SELECTION-SCREEN
COMMENT 03(29) text-170 FOR FIELD pa_xdisp.
PARAMETERS: pa_verd LIKE rfffpdo1-ffdisxverd.
SELECTION-SCREEN
COMMENT 34(15) text-174 FOR FIELD pa_verd.
SELECTION-SCREEN
COMMENT 55(15) text-173 FOR FIELD pa_dsart.
PARAMETERS: pa_dsart LIKE fdes-dsart.
SELECTION-SCREEN: END OF LINE.
PARAMETERS: intraday LIKE rfpdo1_en-akintraday AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK 5.
*C5060356
*------- BAI Preprocessor --------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 6 WITH FRAME TITLE text-007 .
PARAMETERS: p_baipre TYPE bai_prep AS CHECKBOX MODIF ID mo1,
p_priord LIKE prior_day AS CHECKBOX MODIF ID mo1,
p_stop LIKE stop_flag AS CHECKBOX MODIF ID mo1.
SELECTION-SCREEN END OF BLOCK 6.
*------- Interpretationsparameter --------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE text-166.
DATA: num10(10) TYPE n.
DATA: chr16(16) TYPE c.
SELECT-OPTIONS: s_filter FOR febpdo-febfilter1.
SELECT-OPTIONS: t_filter FOR febpdo-febfilter2.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN
COMMENT 01(31) text-176 FOR FIELD pa_bdart.
PARAMETERS: pa_bdart LIKE febpdo-bdart.
SELECTION-SCREEN
COMMENT 36(21) text-177 FOR FIELD pa_bdanz.
PARAMETERS: pa_bdanz LIKE febpdo-bdanz.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK 3.
*------- Ausgabeparameter ----------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 4 WITH FRAME TITLE text-167.
PARAMETERS: batch LIKE rfpdo2-febbatch,
p_koausz LIKE rfpdo1-febpausz, " Kontoauszug drucken
p_bupro LIKE rfpdo2-febbupro,
p_statik LIKE rfpdo2-febstat,
pa_lsepa LIKE febpdo-lsepa.
SELECTION-SCREEN END OF BLOCK 4.
SUBMIT RFEBKA00
WITH AUSZFILE = AUSZFILE ***like this replace the .... and pass selection parameters
WITH BATCH = BATCH
WITH EINLESEN ...
WITH FORMAT ...
WITH INTRADAY ...
WITH MREGEL ...
WITH PA_BDANZ ...
WITH PA_BDART ...
WITH PA_DSART ...
WITH PA_LSEPA ...
WITH PA_MODE ...
WITH PA_TEST ...
WITH PA_VERD ...
WITH PA_XBDC ...
WITH PA_XBKBU ...
WITH PA_XCALL ...
WITH PA_XDISP ...
WITH PCUPLOAD ...
WITH P_BAIPRE ...
WITH P_BUPRO ...
WITH P_KOAUSZ ...
WITH P_PRIORD ...
WITH P_STATIK ...
WITH P_STOP ...
WITH S_FILTER ...
WITH T_FILTER ...
WITH UMSFILE ...
WITH VALUT_ON = VALUT_ON and return .
reward points if it is usefull
Girish
Maybe you are looking for
-
I just picked up a new remote control for Comcast yesterday. I was able to program the remote for the TV after several trys but the cable is not working. The cable light comes on but nothing else. I am able to adjust the volume but no other buttons w
-
I have two reports with drilldown enabled. One has the "magnifying glass" icon to click on to get to the details - the other one does not. How does one "turn on" the magnifying glass? Thank you in advance.
-
How can I manage to install Acrobat Pro XI in Safari ?
Pascal Guernier May 5, 2014 8:26 AM Hi, Someone can tell me how I can manage to install Acrobat Pro XI as the default PDF reader ? Before I tried to remove Acrobat Reader XI from my MacBook Pro retina under Mac OS.X.9.2. With the help of Apple's phon
-
I have a UITableView with a menu on it. I would like to have a description, picture, title and price for each item. there are 19 items so i figured that creating 19 views in the storyboard would not work. Is there a way of doing this? I have the head
-
Help Please ... with calling functions inside listener events
I need the window to update itself before another method inside my listener is called. When I make the call to updateUI() it preforms it's function once my listener event is compelete while I would like to to happend. paw.updateHasMoved(); temp.updat