How to fetch the data from Ecc to BI ?

Hi everybody.
Can anyone briefly explain with the screen shots > How to fetch the datasource from RSA5 tcode in ECC to BI? How you replicate there? how the INFO PACKAGE , TRANSFORMATIONS, DTP , DSO, INFO CUBE was created? where we see the catalogs for this data.......THANKS IN ADVANCE

Hi.
You can follow the below steps to fetch the data from ECC to BI System.
1>Connection should be there between ECC and BW System.
2>Go to Tcode-RSA5 in ECC system and find your data source and then activate it.
3> Go to Tcode-RSA6 in ECC system to check whether your DS is available..if it is there then its been activated.
4>Go to Extract Checker tcode RSA3 and test the data and make sure data is correct.
5>login to BW Side..go to tcode RSA1-->Choose your source system. ECC -> double click on it and you will move to Data source>Select your Application component ex, SD,FI ...>Right click and replicate the Datasouce> Now on refresh you can see the datasource in BI System.
6>Install the related the Infoprovider .. cube or dso ..Connect the datasouurce and create Transformation.
7> Now create infopackage and run it in ful & init mode then do the delta for the new records.
Please refer the below link for more details on extraction.
http://www.trinay.com/SAP%20BW%20Extraction.pdf
Hope this helps.
Br.
Alok

Similar Messages

How to fetch the data from databse table and get the required output

Hi,
I have made a project that connects CEP to database table but i m getting some problem in fetching the data from database.
From the following code :
If the where condition is removed then the application runs fine but i am still not able to fetch the data from the table because it is not showing any output.
Can anyone please suggest me that how to write WHERE statement correctly and how i will be able to see the output.
Following is the config.xml for processor:
======================================
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
     xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
     <processor>
          <name>JDBC_Processor</name>
          <rules>
               <query id="q1"><![CDATA[
                         SELECT STOCK.SYMBOL as symbol, STOCK.EXCHANGE as exchange
                         FROM ExchangeStream [Now] as datastream, STOCK
                         WHERE datastream.SYMBOL = datastream.SYMBOL ]]></query>
          </rules>
     </processor>
     <jms-adapter>
          <name>JMS_IN_Adapter</name>
          <jndi-provider-url>t3://CHDSEZ135400D:7001</jndi-provider-url>
          <destination-jndi-name>jms.TestKanikaQueue</destination-jndi-name>
          <user>weblogic</user>
          <password>welcome1</password>
     </jms-adapter>
</wlevs:config>
Following is the assembly file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:osgi="http://www.springframework.org/schema/osgi"
     xmlns:wlevs="http://www.bea.com/ns/wlevs/spring" xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
     xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
     xsi:schemaLocation="
          http://www.springframework.org/schema/beans
          http://www.springframework.org/schema/beans/spring-beans.xsd
          http://www.springframework.org/schema/osgi
          http://www.springframework.org/schema/osgi/spring-osgi.xsd
          http://www.bea.com/ns/wlevs/spring
          http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
          http://www.oracle.com/ns/ocep/jdbc
          http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
          http://www.oracle.com/ns/ocep/spatial
          http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="StockEvent">
               <wlevs:properties>
                    <wlevs:property name="SYMBOL" type="byte[]" length="16" />
                    <wlevs:property name="EXCHANGE" type="byte[]" length="16" />
               </wlevs:properties>
          </wlevs:event-type>
          <wlevs:event-type type-name="ExchangeEvent">
               <wlevs:class>com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent</wlevs:class>
          </wlevs:event-type>
          <wlevs:event-type type-name="StockExchangeEvent">
               <wlevs:properties>
                    <wlevs:property name="symbol" type="byte[]" length="16" />
                    <wlevs:property name="price" type="byte[]" length="16" />
                    <wlevs:property name="exchange" type="byte[]" length="16" />
               </wlevs:properties>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <bean id="readConverter" class="com.bea.wlevs.adapter.example.JDBC_CEP.Adapter_JDBC" />
     <bean id="outputJDBCBean" class="com.bea.wlevs.bean.example.JDBC_CEP.OutputBean_JDBC">
     </bean>
     <wlevs:adapter id="JMS_IN_Adapter" provider="jms-inbound">
          <wlevs:listener ref="ExchangeStream" />
          <wlevs:instance-property name="converterBean"
               ref="readConverter" />
     </wlevs:adapter>
     <wlevs:processor id="JDBC_Processor" advertise="true">
          <wlevs:listener ref="OutputChannel" />
          <wlevs:table-source ref="STOCK" />
     </wlevs:processor>
     <wlevs:channel id="ExchangeStream" event-type="ExchangeEvent" advertise="true">
          <wlevs:listener ref="JDBC_Processor" />
     </wlevs:channel>
     <wlevs:channel id="OutputChannel" event-type="StockExchangeEvent"
          advertise="true">
          <wlevs:listener ref="outputJDBCBean" />
     </wlevs:channel>
     <wlevs:table id="STOCK" event-type="StockEvent"
          data-source="StockDs" table-name="STOCK" />
     <wlevs:table id="STOCK_EXCHANGE" event-type="StockExchangeEvent"
          data-source="StockDs" table-name="STOCK_EXCHANGE" />
</beans>
ExchangeEvent.java:
package com.bea.wlevs.event.example.JDBC_CEP;
public class ExchangeEvent {
     public String SYMBOL;
     public String symbol;
     public String exchange;
     public ExchangeEvent() {
     public String getSYMBOL() {
          return SYMBOL;
     public void setSYMBOL(String sYMBOL) {
          SYMBOL = sYMBOL;
     public String getSymbol() {
          return symbol;
     public void setSymbol(String symbol) {
          this.symbol = symbol;
     public String getExchange() {
          return exchange;
     public void setExchange(String price) {
          this.exchange = price;
Adapter Class:
package com.bea.wlevs.adapter.example.JDBC_CEP;
import com.bea.wlevs.adapter.example.JDBC_CEP.MyLogger;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import java.text.DateFormat;
import java.util.Date;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.TextMessage;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
     public class Adapter_JDBC implements InboundMessageConverter{
     @SuppressWarnings("unchecked")
     public List convert(Message message) throws MessageConverterException, JMSException {
          Random rand = new Random();
          int unique_id = rand.nextInt();
          DateFormat dateFormat;
          dateFormat = DateFormat.getTimeInstance();
          dateFormat.format(new Date());
          MyLogger.info(unique_id + " CEP Start Time is: " + dateFormat.format(new Date()));
          System.out.println("Message from the Queue is :"+ message);
          TextMessage textMessage = (TextMessage) message;
          String stringMessage = textMessage.getText().toString();
          System.out.println("Message after getting converted into String is :"+ stringMessage);
               String[] results = stringMessage.split(",\\s*"); // split on commas
               ExchangeEvent event1 = new ExchangeEvent();
               event1.setSYMBOL(results[0]);
     List events = new ArrayList(2);
     events.add(event1);
     return events;
Output Bean Class :
package com.bea.wlevs.bean.example.JDBC_CEP;
import com.bea.wlevs.ede.api.StreamSink;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import com.bea.core.datasource.DataSourceService;
public class OutputBean_JDBC implements StreamSink{
     public void onInsertEvent(Object event) {
     if (event instanceof ExchangeEvent) {
          ExchangeEvent cacheEvent = (ExchangeEvent) event;
     System.out.println("Symbol is: " + cacheEvent.getSymbol());
     System.out.println("Exchange is: " + cacheEvent.getExchange());
     System.out.println(DataSourceService.class.getClass());
Kindly let me know if you need further info.

Do you have StockDs configured in your server config.xml?
I think the query should look more like this:
SELECT stocks.SYMBOL, stocks.EXCHANGE
FROM STOCK as stocks, ExchangeStream [Now] as datastream WHERE stocks.SYMBOL = datastream.SYMBOL
Thanks
andy

How to Fetch the Data from a Cube

Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi Krishna

Hey I got the Solution. It follows in this way :
A Cube is nothing but a Data Storage. Based on the Mapping we given it considers the data.
To fetch the data from the Cube -> we have to write the SQl Query as below :
     SELECT dealer_name,model_name,sales
     FROM TABLE(OLAP_TABLE('MDB.FINAL_AW DURATION SESSION',
     'DIMENSION dealer_name AS varchar2(30) FROM FINALDEAL
     DIMENSION model_name AS varchar2(30) FROM FINALMODEL'));
We can create View for the above statement o
we can apply group by ,rollup, etc etc clauses
and even we can write where clauses for the above select statement.
But now my doubt is :
can we apply any calculations while mapping the Level to an Dimension.
Generally we will map Level toa dimension as DBUSER.TABLENAME.COLUMN NAME
can we apply any calculation like :
MIS.PROPKEY020MB.MATURITY_DATE+2
Please help for the above.
If any wrong is there please let me know
Regards,
S.Vamsi Krishna
can we apply

How to Fetch the Data from Screen(Structure) Leval

Hi,
In HR I have to retrive some fields from Screen leval ..Ex.Q0002..genaraly we are able to retrive the
data from PA0002.
in this Scenari how can i fetch data from Q0002.
Thanks in Advance

you can check the below code for this .
DATA: BEGIN OF DYNP_VALUES OCCURS 10.
        INCLUDE STRUCTURE DYNPREAD.
DATA: END   OF DYNP_VALUES.
DATA : HELP_val TYPE Pxxxx-abcde.
REFRESH DYNP_VALUES.
DYNP_VALUES-FIELDNAME = 'PXXXX-ABCDE'.
APPEND DYNP_VALUES.
* read screen values
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
           DYNAME     = SY-REPID
           DYNUMB     = SY-DYNNR
       TABLES
            DYNPFIELDS = DYNP_VALUES
       EXCEPTIONS
            OTHERS     = 1.
IF SY-SUBRC EQ 0.
SORT DYNP_VALUES BY FIELDNAME.
    READ TABLE DYNP_VALUES WITH KEY 'PXXXX-ABCDE' BINARY SEARCH.
    IF SY-SUBRC EQ 0.
      HELP_VAL = DYNP_VALUES-FIELDVALUE.
    ENDIF.
ENDIF.
just check if this code is working for u .
br,
vijay.

How to fetch the data from pl/sql table dynamically

Hi All, I have the requirement of comparing two db views data in pl/sql. So, I have bulk collect the view into pl/sql table. But, the issue is, It is expecting to provide the column name for comparison. But, in my case, column name is dynamic. So, i cannot provide the column name directly for comparison.
For eg: In my view t1_VW, i have 4 columns. stid, c1,c2,c3,c4 and similar structure for t2_vw
my code
TYPE v1_type IS TABLE OF t1_vw%ROWTYPE;
l_data v1_type;
TYPE v1_type1 IS TABLE OF t2_vw%ROWTYPE;
l_data1 v1_type1;
test varchar2(1000);
test1 varchar2(1000);
temp1 number;
begin
SELECT * Bulk collect into l_data
FROM T1_VW;
SELECT * Bulk collect into l_data1
FROM T2_VW;
select l_data(1).stid into temp1 from dual; -- It is working fine and gives me the value properly
-- But, in my case, we are reading the column names from array, i am constructing the query dynamically and execute it.
test :='select l_data(1).stid into temp1 from dual';
execute immediate test into temp1;
-- I am getting error as follows:
Error report:
ORA-00904: "L_DATA": invalid identifier
ORA-06512: at "SYSTEM.BULKCOMPARISON", line 93
ORA-06512: at line 2
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action
end;
- Please help me to get rid of this issue. Is it possible to construct the query dynamically and fetch the data?. If not, is there any other better approach to compare the data between two views?.

Output should display what are all columns changed and its old value and new value.
For eg., output should be
COLUMNNAME OLD_VALUE NEW_VALUE STID
C1 20 10 1
C2 50 40 2
C3 60 70 2
C2 80 90 3Why no do this only via a simple sql ?
create table a (STID number, C1 number, C2 number, C3 number);
insert into a values (1, 20, 30, 40)
insert into a values (2, 40, 50, 60);
insert into a values (3, 90, 80, 100);
create table b as select *
from a where 1 = 0;
insert into b values (1, 10, 30, 40)
insert into b values (2, 40, 40, 70);
insert into b values (3, 90, 90, 100);
commit;And now you can issue such a kind of select
SELECT stid , c1, c2, c3
   FROM
( SELECT a.*,
         1 src1,
         to_number(null) src2
   FROM a
   UNION ALL
   SELECT b.*,
         to_number(null) src1,
         2 src2
    FROM b
   GROUP BY stid , c1, c2, c3
   HAVING count(src1) <> count(src2)
   order by stid;I would then create a new table a_b_difference having the same structure as a or b and insert into it like this
create table a_b_diff as select * from a where 1 = 0;
insert into a_b_diff
SELECT stid , c1, c2, c3
   FROM
( SELECT a.*,
         1 src1,
         to_number(null) src2
   FROM a
   UNION ALL
   SELECT b.*,
         to_number(null) src1,
         2 src2
    FROM b
   GROUP BY stid , c1, c2, c3
   HAVING count(src1) <> count(src2)
   order by stid
   ;Then each time there is a difference between a column in a and its equivalente one in b (per unique stid ) a record will be inserted in this table.
You can do more by adding the name of the table in front of each record in this table to see exactly where the data comes from
Best Regards
Mohamed Houri

Please Help - How to Fetch the Data from a Cube

Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi Krishna

You appear to have the wrong forum. This forum is for the Oracle Workspaces application, which is a component of Oracle Collaboration Suite.
Perhaps one of the forums in the database section will be more relevant:
http://forums.oracle.com/forums/category.jspa?categoryID=18
regards,
-Neil.

How to fetch the data from a pl/sql table and varray, with some example

I want to fetch the data using a cursor from Pl/sql table and varry and I want to update the data.
Please provide me some example.

PL/SQL Table - please note that, right term is Associative Array.
Presumably you are referring to the 'often heated' back-and-forth that sometimes goes on in the forums when people refer to ANY PL/SQL type using a term with the word 'table' in it?
Curious that you then show an example of a nested table!
type emp_tab is table of employees%rowtype;
The 'right term' for that is 'nested table'. The following would be an 'associative array' or 'index-by table'
type emp_tab is table of employees%rowtype INDEX BY PLS_INTEGER;
Those used to be called 'PL/SQL tables' or 'index-by tables' but 'associative array' is the current term used.
Associative Arrays
An associative array (formerly called PL/SQL table or index-by table) is a set of key-value pairs. Each key is a unique index, used to locate the associated value with the syntax variable_name(index).
The data type of index can be either a string type or PLS_INTEGER.
Since the Oracle docs often use 'PL/SQL table' or 'index-by table' it isn't unusual for someone asking a question to use those terms also. Technically the types may not be 'tables' but it's clear what they mean when they use the term.
In PL/SQL the term 'nested table' is still used even though the PL/SQL collection is not really a table. SQL does have nested tables where the data is actually stored in a table. The PL/SQL 'nested table' type can be used as the source/destination of the SQL data from a nested table so that may be why Oracle uses that term for the PL/SQL type.
The doc that SKP referenced refers to this use:
Nested Tables
In the database, a nested table is a column type that stores an unspecified number of rows in no particular order. When you retrieve a nested table value from the database into a PL/SQL nested table variable, PL/SQL gives the rows consecutive indexes, starting at 1.

How to fetch the data from the table COEP for WBS element,cost center,,,,,?

Hi,
I would like to retrive the data from the table COEP ,based on KOKRS,BELNR fields.
I need the output for Cost centre, cost element, wbs element,net work ,activity.
These values are storing OBJNR ,OBJNAR_1,OBJNR_2,OBJNR_N3.
But here always these field are not giving the correct values.
for example : for one record COST CENTRE vlaue is storing in OBJNR_1 field,
for one record COST CENTRE vlaue is storing in OBJNR_2 field,
for one record COST CENTRE vlaue is storing in OBJNR_3 field.
Here SAP has used a generic approach for this.
How can I dispaly the values in this case ?
Thanks and Regards
Srinivas.N

Hi,
I am asking, how can we say OBJNR_1 value alwyas belongs to cost center ?
USPOB is not filling always.

How to fetch the data from a standard report to a user defined report

Hi,
i m using a standard report RFEBKA00 which uses CHAR300 variable(it is not used in selection screen).
can u help me ,
to collect the data from CHAR300 and to use it in my own report.
Message was edited by:
        jaya raman

hi   jayaramm..
you have to use SUBMMIT and send the parameters of your selection screen to the standard submmit prorgram...
beliow is the program for you .... just pick the selection parameter and pass corresponding parameter in the Submit which i mention as ...... replace with = and parameter in the selection screen.
report zrsers.
INCLUDE rfebka03.
INCLUDE rfebfr03.                      " Data France
INCLUDE RFEKAP00.                                          "n927883
TABLES: rfsdo,
        sscrfields,
        hrdeaoifld.
DATA: lt_statements TYPE STANDARD TABLE OF fieb_kukey,
      l_statement TYPE fieb_kukey.
*Daten für die Mahnsperre                                  "mo260105
TYPES: BEGIN OF s_kukey_mansp,
        sign(1),
        option(2),
        low TYPE kukey_eb,
        high TYPE kukey_eb,
        mansp TYPE mansp,
        anztg TYPE anztg,
        bukrs TYPE bukrs,
      END OF s_kukey_mansp.
DATA: lt_kukey TYPE STANDARD TABLE OF s_kukey_mansp,
      l_kukey LIKE LINE OF lt_kukey,
      l_gjahr TYPE gjahr,
      LT_GJAHR TYPE STANDARD TABLE OF GJAHR,
      L_MANSP TYPE MANSP,
      l_kunnr TYPE kunnr,
      l_lifnr TYPE lifnr.
FIELD-SYMBOLS: <mansp> LIKE LINE OF gt_mansp.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-165.
PARAMETERS:     einlesen     LIKE rfpdo1-febeinles,
                format       LIKE rfpdo1-febformat DEFAULT 'M' AS
                LISTBOX VISIBLE LENGTH 30 USER-COMMAND bai,
                AUSZFILE     LIKE RFPDO1-FEBAUSZF,
                umsfile      LIKE rfpdo1-febumsf,
                pcupload     LIKE rfpdo1-febpcupld DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK 1.
*------- Buchungsparameter ---------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 2 WITH FRAME TITLE text-160.
*SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_xcall TYPE febpdo-xcall    RADIOBUTTON GROUP 1.
*SELECTION-SCREEN
* COMMENT 03(29) FOR FIELD pa_xcall.
PARAMETERS: pa_xbkbu TYPE febpdo-xbkbu.
*SELECTION-SCREEN
* COMMENT 35(16) text-171 FOR FIELD pa_xbkbu.
PARAMETERS: pa_mode TYPE rfpdo-allgazmd NO-DISPLAY.
*SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_xbdc LIKE febpdo-xbinpt   RADIOBUTTON GROUP 1.
SELECTION-SCREEN
COMMENT 03(29) text-163 FOR FIELD pa_xbdc.
SELECTION-SCREEN
COMMENT 35(20) text-164 FOR FIELD mregel.
PARAMETERS: mregel   LIKE rfpdo1-febmregel DEFAULT '1'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
PARAMETERS: pa_test LIKE rfpdo1-febtestl RADIOBUTTON GROUP 1.
SELECTION-SCREEN
COMMENT 03(29) text-168 FOR FIELD pa_test.
SELECTION-SCREEN: END OF LINE.
PARAMETERS: valut_on     LIKE rfpdo2-febvalut DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK 2.
*------- Finanzdisposition ---------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 5 WITH FRAME TITLE text-172.
SELECTION-SCREEN: BEGIN OF LINE.
PARAMETERS: pa_xdisp LIKE febpdo-xdisp.
SELECTION-SCREEN
COMMENT 03(29) text-170 FOR FIELD pa_xdisp.
PARAMETERS: pa_verd LIKE rfffpdo1-ffdisxverd.
SELECTION-SCREEN
COMMENT 34(15) text-174 FOR FIELD pa_verd.
SELECTION-SCREEN
COMMENT 55(15) text-173 FOR FIELD pa_dsart.
PARAMETERS: pa_dsart LIKE fdes-dsart.
SELECTION-SCREEN: END OF LINE.
PARAMETERS: intraday     LIKE rfpdo1_en-akintraday AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK 5.
*C5060356
*------- BAI Preprocessor --------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 6 WITH FRAME TITLE text-007 .
PARAMETERS:     p_baipre   TYPE bai_prep AS CHECKBOX MODIF ID mo1,
                p_priord   LIKE prior_day AS CHECKBOX MODIF ID mo1,
                p_stop     LIKE stop_flag AS CHECKBOX MODIF ID mo1.
SELECTION-SCREEN END OF BLOCK 6.
*------- Interpretationsparameter --------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE text-166.
DATA: num10(10) TYPE n.
DATA: chr16(16) TYPE c.
SELECT-OPTIONS: s_filter FOR febpdo-febfilter1.
SELECT-OPTIONS: t_filter FOR febpdo-febfilter2.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN
   COMMENT 01(31) text-176 FOR FIELD pa_bdart.
PARAMETERS: pa_bdart     LIKE febpdo-bdart.
SELECTION-SCREEN
   COMMENT 36(21) text-177 FOR FIELD pa_bdanz.
PARAMETERS: pa_bdanz     LIKE febpdo-bdanz.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK 3.
*------- Ausgabeparameter ----------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 4 WITH FRAME TITLE text-167.
PARAMETERS: batch        LIKE rfpdo2-febbatch,
            p_koausz     LIKE rfpdo1-febpausz,   " Kontoauszug drucken
            p_bupro      LIKE rfpdo2-febbupro,
            p_statik     LIKE rfpdo2-febstat,
            pa_lsepa     LIKE febpdo-lsepa.
SELECTION-SCREEN END OF BLOCK 4.
SUBMIT RFEBKA00
        WITH AUSZFILE = AUSZFILE   ***like this replace the .... and pass selection parameters
        WITH BATCH = BATCH
        WITH EINLESEN ...
        WITH FORMAT ...
        WITH INTRADAY ...
        WITH MREGEL ...
        WITH PA_BDANZ ...
        WITH PA_BDART ...
        WITH PA_DSART ...
        WITH PA_LSEPA ...
        WITH PA_MODE ...
        WITH PA_TEST ...
        WITH PA_VERD ...
        WITH PA_XBDC ...
        WITH PA_XBKBU ...
        WITH PA_XCALL ...
        WITH PA_XDISP ...
        WITH PCUPLOAD ...
        WITH P_BAIPRE ...
        WITH P_BUPRO ...
        WITH P_KOAUSZ ...
        WITH P_PRIORD ...
        WITH P_STATIK ...
        WITH P_STOP ...
        WITH S_FILTER ...
        WITH T_FILTER ...
        WITH UMSFILE ...
        WITH VALUT_ON = VALUT_ON   and return .
reward points if it is usefull
Girish

Pls let me know how to fetch the data from tables bdcp or bdcps

Hi guru's!!!!
I want to post the changed master data to the legacy.
I am npt using IDOC. I want to go ahead by using the change doc. I want to know how we can filer the change doc. data for my equirement. & also how to send the data
transaction wise. I am using the FMs "change_pointers_read.
it is very urgent..
Thanks in advance!!!!!

Hi,
1. You will have to activate the change pointers for the master data you are looking for.
2. You can do the configuration so that whenever master data is changed, a IDOC is triggered for that master data.
3. You can configure the IDOC's to be transmitted to your legacy system in the form of files or to your middleware system.
<b>You don't have to read the CHANGE POINTERS yourself.</b>
Regards,
Ravi
Note : Please mark all the helpful answers
Message was edited by: Ravikumar Allampallam

How to fetch the data from query to internal table ?

Dear all ,
I would like to fetch the query data(sq01) into my internal table ? is it possible to do that ?
Best Regards,
Carlos

Hi
Try this <b>RRW3_GET_QUERY_VIEW_DATA</b>
Also, you can have a look at this...
<a href="/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii Query results into Internal table</a>
Regards
Raj

Fetch the data from the tables in the SQL 2005 server to sap R/3.

Hi Experts,
We need to fetch the data from the tables in the SQL 2005 server to sap R/3.
Please explain which will be the best approach to fetch the same and how to do it. Sample program can greatly help.
<< Please do not offer points >>
Regards,
Shobana K
Edited by: Rob Burbank on Sep 21, 2010 2:36 PM

Hi,
Try NATIVE SQL statements in your abap code otherwise you can try to establish jdbc connection from ABAP program.
search in SDN for samples!
Suresh

Fetch the data from the Data base based on selection criteria in ABAP

Hi
I am new to ABAP and working on the Screen where User Enters Company code from and to , Document no and to, I have defined as specified below
SELECT-OPTIONS Company     FOR p_ccode.
SELECT-OPTIONS Document    FOR p_fdocnr.
SELECT-OPTIONS Year           FOR p_fyear.
When I debug in the pgm I get the values as
IBT11001100 (From and To Company Code)
IBT23234241002323424246 (From and To doc no)
IBT20092009 (From and To Year)
How can write a SQL select statement to fetch the data from the Database based on the above inputs
Thanks
PR

Moderator message:
Sorry - this isn't an ABAP training forum. Please press F1 on SELECT-OPTIONS and/or SELECT.
Thread locked.
Rob

I am extracting the data from ECC To bw .but Data Loading taking long tim

Hi All,
i am extracting the data from ECC To BI Syatem..but Data Loading Taking Long time. from last 6 hoursinfopackage is running.still it is showing yellow.Manually i made the red.and delete again i applied repeat of the last delta.but same proble is coming .in the status job is showing bckground job is not finished at source system.we requested to basis.basis people killed that job.again we schedule the chain also again same problem is coming.how can i solve this issue.
Thanks ,
chandu

Hi,
There are different places to track your job. Once your job is triggered in BW, you can track your load job where exactly it is taking more time and why. Follow below steps:
1) After InfoPackage is triggered, then take the request number and go to source system to check your extraction job status.
You can get the job status by taking the request number from BW and go to transaction SM37 in ECC. Then give the request number with begining '' and ending ''. Also give '*' to user name.
Job name: REQ_XXXXXX
User Name: *
Check the job status whether job is completed or cancelled or short dump. If the job is still running check in SM66 whether you can see any process. If not accordingly you got to check in ST22 or SM21 in ECC. If the job is complete, then the same in BW side now.
2) Check the data arrived in PSA, if not check whether Transfer routines or start routines are having bad SQL or code. Similarly in update rules.
3) Once it is through in Source system (ECC), Transfer rules , Update Rules, then the next task is updating the data might some time take more time which might be based on some parameters ( Number of parallel process to update database ). Check whether updating the database is taking more time and may be you got to check with the DBA guy also.
At all the times you should see minimum of atleast once process running all the time in SM66 till the time your job gets complete. If not you will see a log in ST22.
Let me know if you still have questions.
Assigning points is the only way of saying thanks in SDN.
Thanks,
Kumar.

Query on loaded the data from ECC to BI

Hello Bw guys,
I kept one responsibility in my resume as Loaded the data from ECC to BI and used intialization with delta update and full update methods.What does it means? Can u please help me out?
Thanks
Amarnath K

Very simple.
This is somewhat like how you updated your resume by transfering from another and did a fake update to your resume.
The difference is ECC does that using a authorized route to update it in BI.
PS:If you have provided the client name you are going to join it will be easy for us to explain to them directly.
~Andrew
Edited by: Andrew J on Dec 18, 2009 3:44 PM

How to fetch the data from Ecc to BI ?

Similar Messages

Maybe you are looking for