How to figure out specs for display replacement T60

The display on my T60 needs to be replaced, but I'm having a lot of trouble figuring out which display I have so I can order a replacement. The computer model is 1953D6U which comes in the following:
14.1-inch XGA (1024 x 768 resolution) TFT display
14.1-inch SXGA+ (1400 x 1050 resolution) TFT display
15 inch XGA (1024 x 768 resolution) TFT display
15 inch SXGA+ (1400 x 1050 resolution) TFT display
15 inch UXGA (1600 x 1200 resolution) TFT display
15.4 inch WXGA (1280x800 resolution) TFT display
15.4 inch WSXGA+ (1680x1050 resolution) TFT display
Since my display is ~12inch across, I think I have the 14.1 inch screen, but how do I know about XGA/SXGA and resolution part?
Help is much appreciated!
-Heather

ThinkPad T60 (1953-D6U)
T2300(1.66GHz), 512MB RAM, 60GB 5400rpm HD, 14.1in 1024x768 LCD, Intel 950, CDRW/DVD, Intel 802.11abg wireless, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 6c Li-Ion batt, WinXP Pro
you have the 14.1 inch xga LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

How to figure out the properties of field/object ??

Hello
I have field (say, its name is field_1) in my_form and i am coloring yellow by using below code of initialization event:
this.ui.oneOfChild.border.fill.color.value = "255,255,191"; (Actually, just for differentiating / tracing back purpose here am assigning this yellow color to this field, you can suggest me any thing else that marks / tags this field (i can not populate a value, bcz its visible to user), so that in the CHANGE event of this field, again i want to check/get/know that whether this field is tagged/marked or not)
fine. But, because of some/below reason, i need to find out its color by using JavaScript, pls. let me know how to figure out its color is as yellow by using JavaScrit?
Reason: If field_1's color is YELLOW (or you suggested any tag/mark as said in the above in red text), then i have to make HIDE the field_2
Field_0's position is extreme left, Field_1's position is middle and the Field_2's position is exterme right of the page.
I guess, i hv only one option of finding out color, hence am looking forward for JavaScript to find out the color of a field in question
(OR)
Also, pls. let me know the JavaScript that How can i make HIDE a check box for that COMLETE session (i mean, starting from launching the form in the browser until he closes the window/browser/tab/form), i guess, this idea also workes for my requirement, ( i want to put this code in the docReady event) .....no matter/what ever code is existing there in any event of that field level
Thank you

Hi,
If you want to give a visual indicator to the user, then colouring the field yellow is probably a good approach.
However if you just want to keep track on the field, then you could test the field's value (.rawValue) and take appropriate action. In addition you can also attach a variable to an object using the <desc> element. It is a bit involved but you can find an example here: http://assure.ly/x1QObn.
Hope that helps,
Niall

How to figure out server has capacity to install OEM 10 Grid control

How to figure out server has capacity to install OEM 10 Grid control
Hi Experts
I have HP_UX 11.11 server which has 1 instance on it with version 10.2.0.1.0.
Now I would like to install Grid control with a separate instance for repository.
I was told I would need 2 GB Ram for OMS and 2 GB Ram for instance.
Now how do I figure out if my server has enough resources from Ram perspective
Following is output from top and vmstat
1. for top it says 3045556K free , now is this free memory virtual(real +swap) or real?
2. as per top I only have free 3GB(3045556K) , so does that mean I can not have OMS & repository on
this server ?
3. In vmstat I see free memory as 762335
in man it says free - Size of the free list
what does this mean, how much is my free meemory ?
4. For OMS I read - It is a J2EE application that is installed and deployed using Oracle
Application Server
Now when I look at top I see these processes
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Does oasadm user means Oracle application server ? If yes does it mean I will not
need 2GB for OMS ?
cov6817:plmbomdv $ vmstat 2 5
procs memory page faults cpu
r b w avm free re at pi po fr de sr in sy cs us sy id
1 0 0 3348627 762335 69 11 0 0 0 0 0 1014 4916 671 12 1 87
1 0 0 3348627 762284 17 0 0 0 0 0 0 1040 10514 886 1 0 99
1 0 0 3330668 762284 10 0 0 0 0 0 0 1031 7820 872 0 0 100
1 0 0 3330668 762284 9 0 0 0 0 0 0 1033 6173 873 0 0 100
1 0 0 3330668 762284 5 0 0 0 0 0 0 1029 5468 891 1 0 98
cov6817:plmbomdv $ top
System: cov6817 Wed Jul 18 08:48:43 2007
Load averages: 0.02, 0.04, 0.03
267 processes: 215 sleeping, 51 running, 1 zombie
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.03 0.0% 0.0% 0.2% 99.8% 0.0% 0.0% 0.0% 0.0%
1 0.03 0.6% 0.0% 0.4% 99.0% 0.0% 0.0% 0.0% 0.0%
2 0.02 0.6% 0.0% 0.2% 99.2% 0.0% 0.0% 0.0% 0.0%
3 0.01 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
avg 0.02 0.4% 0.0% 0.2% 99.4% 0.0% 0.0% 0.0% 0.0%
Memory: 8733312K (7157492K) real, 15353696K (13382776K) virtual, 3045556K free Page# 1/10
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Thanks a lot
New DBA

how much is my free meemory ?Do you have kmeminfo command installed?
4. For OMS I read - It is a J2EE application that is
installed and deployed using Oracle Application Server
s oasadm user means Oracle application server ? If
yes does it mean I will not need 2GB for OMS ?Even if that java vm is an instance of Oracle AS (OC4J), the Grid Control installs a separate instance of AS. The choice to install OMS app to any existing AS home does not exist in any version I know.
Find out what more is running on the box and how much resources (i.e. RAM) those apps are configured with.

How to figure out ORA_12203:TNS unable to connect to destination?

OS: WSK
I have installed oracle817 and form6i in different directory in a machine
and defined two oracle home for them. I can access sqlplus through
OEM of oracle817, but I can not do the same thing through form6i,
the error showed me: ORA_12203:TNS unable to connect to destination.
But after installation, I have copied tnsname.ora of oracle817(oracle_home/network/admin) to tnsname.ora of form6i
(oracle_home_net80/admin). The same error slao showed me when I open
From Builder, droped the menu FILE --> Connect: system/manager/oradb,
TNS unable to connect to destination.
How to figure out this promble? I think maybe listener configuration
have some promble, but I am not sure how to do that?
COuld some give me some ideas? Thanks

Hi shay,
I have not fixed my problem. I defined two homes respectively:
Oracle817: Home_name: oraHome81
Path: D:\oracle
Form6i: home_name: orahome6i
path: d:\Form6i
But I'm wondering when I opened the ORACLE folder under
HKEY_LOCAL_MACHINE, All_Homes just show one home name:
oraHome81 or orahome6i, deponding on which I imported later.
So I like to ask do I need make the export/import
registery of ORACLE floder under HKEY_LOCAL_MACHINE
when you install oralce and form6i together?
By the way, let me attached the TNSNAMES.ora file which
configured by Oracle during installation:
# TNSNAMES.ORA Network Configuration File: D:\oracle817\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORADB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = name3)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORADB)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = name3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = ORADB)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)

How to develop a report for display unused materials

how to develop a report for display unused materials? where can i find them?

Hi Phani,
I didnt get what u acually mean by unsued material. These are some sample materail types which u can find in table 'Mara' field 'Mtart'.
ABF Waste
AEM Samples
BLG BLG Empties External
BLGA BLGAEmpties Fixed assets
CH00 CH Contract Handling
COMP Prod. alloc., purchased
CONT KANBAN Container
COUP Coupons
DIEN Service
DOCU documentary batch
ERSA Spare parts
FERT Finished product(fert)
FGTR Drinks
FHMI Prod. resources/tools
FOOD Foods (excl. perishables)
FRIP Perishables
GR01 material type 01
GR02 material type 02
HALB Semi-finished product
HAWA Trading goods
HERS Manufacturer parts
HIBE Operating supplies
IBAU Maintenance assembly
INTR Intra material
KMAT Configurable material
LEER Empties
LEIH Returnable packaging
LGUT Empties (retail)
MODE Apparel (seasonal)
NLAG Non-stock material
NOF1 Nonfoods
PIPE Pipeline material
PLAN Trading goods (planned)
etc.
ex:
select * from mara where mtart = 'ABF'.
Regards,
Kiran B

How to get out of for loop in eclipse debugging

How to get out of for loop in eclipse debugging for java classes ?
I am in a for loop in a code. i want to get out of it ...but how ?

is changing the behaviour of a running class like that really going to be any use for debugging? what's the actual problem?

HOW TO PREPARE TECH SPEC FOR OOPS PROGRAM

Hi..
This is Sri .I Created a Report program in oops. can any one help how to prepare tech spec for this oops report,,can i need to mention Classes ,Methods, ref-classes,screens in preparation of Spec..
Thanks in advance..I surly reward with points if my prob is solved,,,,,,
SRI

Hi Sri,
Tech Spec is nothing but a document containing some technical information about
the object you have developed/coded. Normally this should be prepared before you code and not the other way round.
You should mention relevant classes created / used. If you have created / added some class components like attributes/methods/events/interfaces mention that too.
You can also mention functionality to be coded in methods of the class. Please understand it is not a replica of your program but some useful technical info that the coder will use to code and later people will use for maintainance purpose.
It is better if you have some defined template for the tech spec, else just put the info in a structured and readable manner.
Regards
Indrajit.

I recently dropped my iphone 5 and it is now not turning on. will this be covered in the 1 year warranty and if not how much will it cost for a replacement ? thanks in advance

I recently dropped my iphone 5 and it is now not turning on. will this be covered in the 1 year warranty and if not how much will it cost for a replacement ? thanks in advance

No accidental damage is not covered
Apple store will exchange for a replacement in US $229 similar in other currencies

OSB: how to figure out the execution time of OSB proxy

Trying to figure out how to determine the execution time taken for any given OSB proxy. Seems like the OSB built-in alerting facilities can display the average response time of all calls to a proxy but not individually. Is there a way to dig this out from the monitoring data being collected?

Service monitoring which comes OOTB is supposed to be aggregated because in usual scenarios you dont need to see the processing time of a specific request. From a performance monitoring perspective the useful data usually is average processing time and minimum or maximum processing time for any request within the aggregation interval which is provided by OSB OOTB.
Now, in some cases the business might want to track each request individually. So, for example they can track how long did it take to process a specific order. OSB does not provide this feature OOTB. There are multiple ways to get this implemented. Two of the most common ways are:
1. Add a start and end time capturing in Proxy Services. You can use logging/reporting/publish to a DB etc to achieve this. But this is indeed intrusive and you will need to do this for every Proxy which needs to be monitored at every instance level. This is also a slight overhead in processing in itself.
2. Use monitoring products which can monitor the WS invocations externally. This will mean more investment but definitely a much better solution. You can consider using different products from Oracle and other vendors based on your requirements, features of products and costs. A few examples are OWSM, Oracle EM, CA Wily etc.

How to figure out list of users registered to POOL?

Hello ,
We have a remote site and user registers to that remote site SBA/LYNC FE directly. Now i wanted to figure out if there is any way through which i can check how many users are registered to that remote FE ??
Is there any command for the same?
Thanks

Hi,
You can also run: Get-CsUser | Get-CsUserPoolInfo to receive user pool information.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to create functional spec. for tds report in sap

hello ,
My client wants to develop tds report as per their desired format. the format is like
DATE OF DEDUCTION/DATE OF CREDIT
NAME OF THE PARTY
SEC
COMP/NON-COMP.
AMOUNT PAID
TDS
SURCHARGE(10%)
ED.CESS(2%)
TOTAL
BSR CODE
CQ/DD NO.
CHAL.SR.NO.
DEPOSIT DATE
PAN NO.
I talked to our abap person.But he said he needs the functional spec to develop the same.But i dont know how to create the functional spec and table join.
I am very new in sap.If possible then Please help me in this regard.
thanks&regards
baishali

Hi
In the functional specifications, you need to tell which Tables and Fields should be picked up for displaying the data. Specifically for TDS some of the common tables are WITH_ITEM
Also look at J1IENMIS. Much of teh information you require is there in the new TDS Report for India, though not exactly in the same order
Regards
Sanil

How to figure out suitable Enhancement Option/point

Hi All,
I have to limit creation of vendor for a particularly one user based on Country Code.
For ex
if sy-uname eq 'XYZ'.
IF LFA1-NAME1 NE 'US'.
ERROR MESSAGE...
ENDIF.
ENDIF.
I know how to do that user user exits and was trying to figure out how can i achieve this using enhancement frame work in ECC 6.0
I found all below Explicit Enhancement Points/Sections when i searched in Pragram SAPMF02K (xk01)
If you just post the relevant coe, it has a better chance of formatting.
MY QUESTIONS ARE
1) How should i figure out which enhancement point i should use for particular issue (When the user is going from Vendor Address to Vendor control Screen while creating the vendor. It should an error mess if the user is using wrong vendor code?
Thanks in advance
Venki
Edited by: venki gundla on May 31, 2009 10:05 PM
Edited by: venki gundla on May 31, 2009 10:16 PM
Edited by: Rob Burbank on May 31, 2009 6:37 PM

Hi All,
For some reason ,every thing is continous. I know it sometimes irritating but i couldn't find a way to post it
Line by line.
Actually
MY QUESTIONS ARE 1) How should i figure out which enhancement point i should use for particular issue (When the user is going from Vendor Address to Vendor control Screen while creating the vendor. It should throw an error mess if the user is using wrong vendor country name than he is authorized to?
Thanks
Venki

Help with figuring out commands for test!

These are study guide questions, I would appreciate any help!!
What does the following PowerShell command do?
PS C:> ls | Where-Object { $.PSIsContainer } | ForEach-Object { (ls $ | ? { -not $_.PSIsContainer } | sort LastWriteTime)[0] }
Select one:
Finds all the files that are one subdirectory deep
Searches one subdirectory level deep and finds the least recently modified file in each subdirectory
Recursively searches for the file named "0"
Searches each subdirectory and finds the most recently modified file
Recursively searches for the newest file on the system
What does the following PowerShell command do?
PS C:> Select-String "[0-9]{10}" audit.log
Select one: Searches for the literal string "[0-9]{10}" and returns each line containing the string
Looks for and returns the first instance of the literal string "[0-9]{10}" in the file audit.log
Looks for and returns each line containing 10 consecutive digits in the file audit.log
Looks for and returns the first number that is exactly 10 digits found in the file audit.log
Looks for and returns a 0-9 followed by a 1 or 0 in the file audit.log
What does the following PowerShell command do?
PS C:> ls -r -fo | ? { $_.LastAccessTime -gt (Get-Date).AddDays(-1) } | select LastAccessTime, Name
Select one: Finds all files, excluding hidden files, accessed in the last day and outputs the last access time and filename
Finds all files, excluding hidden files, accessed in the last day and outputs the last access time and the user
Finds all files, including hidden files, accessed in the last day and outputs the last access time and filename
Finds all files, including hidden files, accessed in the last day and outputs the last access time and the user
Finds all files, including hidden files, accessed more than one day ago and outputs the last access time and filename
What does the following PowerShell command do?
PS C:> Get-Process cmd | ? { $_.StartTime -lt (Get-Date).AddHours(-1) } | Stop-Process
Select one: Kills any cmd.exe process that has been running for longer than an hour
Starts cmd.exe and stops it after one hour
Kills any cmd.exe processes that started exactly one hour ago
Kills any cmd.exe process that has started in the past hour
Starts cmd.exe after pausing for one hour
What does the following PowerShell command do?
PS C:> ls \users\ephil\Documents | % { move $.FullName -dest $.FullName.ToLower() }
Select one: Moves each file in \Users\ephil\Documents to a lower directory
Moves each file in \Users\ephil\Documents to the directory named FullNameToLower
Moves files with all lowercase characters to \Users\ephil\Documents
Finds all files containing the words user, ephil or documents and renames them to lower case
Renames each file in \Users\ephil\Documents to lower case

It really doesn't help you learn if we're giving you the answers to questions. That said, there are a number of places where the code you've posted has syntax errors. Any place you see "$" with nothing after it in that code (ie, "$.StartTime" or "ls $ |",
assume they meant to type "$_" ("$_.StartTime", "ls $_ |").
There are also a lot of aliases and partial parameter names in the code. This may be deliberate, to get you to play around with the commands and figure out what the cryptic notation really means, but I don't think it's very helpful. We encourage
people to use full command and parameter names in scripts to enhance code clarity; the same standard should be applied to your test questions. Aliases are an optional convenience if you want to save some typing, once you're comfortable with them.
So, here are the aliases used in your questions, along with their actual command / parameter name:
% : ForEach-Object
? : Where-Object
ls : Get-ChildItem
sort: Sort-Object
select: Select-Object
move: Move-Item
-r: (as a parameter to ls / Get-ChildItem) -Recurse
-fo: (as a parameter to ls / GetChildItem) -Force
-dest: (as a parameter to move / Move-Item) -Destination
Yes the $_. turned out as $. for some reason.
Could you help me with any of these questions? They will really prepare me well for the test. If you could provide answers for any of them I could then work backwards and figure out how to arrive at the answer.

Trying to figure out script for use in Butler

Hi,
I download a lot of bittorrents from a particular bt site -- bt.etree.org. To download and seed, I use Vuze. Downloading the bt files and then starting up Vuze to load in the files are tasks I repeat over and over again. I'd like to automate it as per the following pseudocode:
When user clicks any download link on bt.etree.org, peform these actions:
1. Start Vuze.
2. Navigate to File --> Open --> Open bittorrent file*
3. Navigate to folder where downloads are stored.
*or something like that path; I'm not actually in front of my iMac at the moment.
I can't figure out how to make this work. I tried recording the actions, but it didn't help.
I'd like to load this script into Butler. I know how to set up Applescript in Butler, I just don't how to make code out of this particular set of steps.
Any guidance is appreciated.
Thanks for your time.

No offense, but it sounds to me like you're making the classic mistake many people make when starting out with AppleScript.
From your question, it's clear that you're trying to get AppleScript to perform the actions you'd take manually - open this, click here, select this menu item, etc.
While that's mostly workable (and easy to conceptualize), that's not where AppleScript's strength is. Rather than telling AppleScript HOW to do things (click here, type this, etc.) you're better off telling it WHAT you want it to do - in this case, open a torrent file. The reality is that - in most cases - you don't care HOW it's done, just that it happens. In this case you have no real interest in clicking menu items, navigating file dialogs, etc. you just want to open the file.
Therefore I suggest that your request could be handled by:
tell application "Finder"
open file "your.torrent" of folder (path to downloads folder) using application "Vuze"
end tell
Now this does assume that you know the name of the torrent you want to open, but could be easily reworked to prompt you if that's what you need.
Note also that this script targets the Finder to open the file - that's because Vuze has no AppleScript support of its own - you can't tell Vuze to do anything directly. It's an all too-common problem.

How to Figure out what checkboxes are selected upon a button click...

If I have a panel with some JCheckBoxes and a JButton, how can I figure out what checkboxes are selected upon the button click? If I add an actionlistener to the button, inside actionPerformed, how would I know what checkboxes are selected? One caveat is that the name and number of these checkboxes are dymanically chaing based on a configuration file so I do not know what the names of these check boxes are.
Any help/code sample would be appreciated.

Here's one of several different ways to do it. It attaches an ItemListener to each checkBox. When the checkBox is clicked, it is either added or removed from a List of selected items. Clicking the button will show you the selected items.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
public class CheckBoxTest extends JFrame
JCheckBox chkChoice1 = new JCheckBox("English");
JCheckBox chkChoice2 = new JCheckBox("French");
JCheckBox chkChoice3 = new JCheckBox("German");
JCheckBox chkChoice4 = new JCheckBox("Italian");
JTextArea txaDisplay = new JTextArea(5, 20);
JButton btnShow = new JButton("Show Selected Items");
ArrayList <JCheckBox>choices = new ArrayList<JCheckBox>();
public CheckBoxTest()
    super("");
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    chkChoice1.addItemListener(new CheckBoxListener(chkChoice1));
    chkChoice2.addItemListener(new CheckBoxListener(chkChoice2));
    chkChoice3.addItemListener(new CheckBoxListener(chkChoice3));
    chkChoice4.addItemListener(new CheckBoxListener(chkChoice4));
    btnShow.addActionListener(new ActionListener(){
      public void actionPerformed(ActionEvent event)
        txaDisplay.setText("");
        for (JCheckBox jcb : choices)
          txaDisplay.append(jcb.getText() + "\n");
    JPanel buttonPanel = new JPanel(new FlowLayout());
    buttonPanel.add(chkChoice1);
    buttonPanel.add(chkChoice2);
    buttonPanel.add(chkChoice3);
    buttonPanel.add(chkChoice4);
    JScrollPane scroll = new JScrollPane(txaDisplay);
    scroll.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
    scroll.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
    JPanel dataPanel = new JPanel();
    dataPanel.add(btnShow);
    dataPanel.add(scroll);
    Container c = getContentPane();
    c.setLayout(new BorderLayout());
    c.add(buttonPanel, BorderLayout.NORTH);
    c.add(dataPanel, BorderLayout.CENTER);
    pack();
public static void main( String[] args )
    CheckBoxTest frame = new CheckBoxTest();
    frame.setVisible(true);
class CheckBoxListener implements ItemListener
    JCheckBox checkBox;
    public CheckBoxListener(JCheckBox checkBox)
      this.checkBox = checkBox;
    public void itemStateChanged(ItemEvent event)
      if (checkBox.isSelected())
        choices.add(checkBox);
      else
        choices.remove(checkBox);
}Or, you could just maintain all the checkboxes in a Collection ahead of time. When the Show button is selected, simple query isSelected() on each item.
Again, there are several different ways.

How to figure out specs for display replacement T60

Similar Messages

Maybe you are looking for