How to file share between my Quad and 2.5DP

I installed Leopard on the guinea pig G5 2.5 DP. I have 10.4.9 on the Quad.
Both non intel.
Would someone be kind enough patient and in simple terms teach me how to finally after all these years, allow files to be shared ( tiffs, jpgs etc ) from one to the other. They are each connected into a LYNKSYS ethernet hub.
is this possible to do?
if so please tell me how
i remember them telling me that i need to have permission to do so.
how is this all accomplished and is the task easy enough to be done in a short amount of time
thanks

Hi Glenn Losack-
This should help: Mac OS: Connecting to the Internet and sharing files locally at the same time
Luck-
-DaddyPaycheck

Similar Messages

  • Is there a way to file share between an iMac and iPad?

    I'm curious as to whether or not you can file share between an iPad and an iMac.  The main reason would be in case my wife or I were working on something on the iMac downstairs, we could "pull it up" on the iPad upstairs without having to sync it with the cable....or perhaps I'm just lazy...

    check out FileBrowser.
    another option may be Dropbox.

  • Cannot file share between MacBook Pro and iMac, but can Screen Share fine.

    Hi all,
    Very strange problem going at the minute!
    I can Screen Share both ways (iMac - MBP and MBP - iMac) just fine but can't seem to File Share between either computer. They are both on the same network and both have the exact same settings under SysPrefs. I can see both devices in a Finder window and can click the 'Connect As...' button, but once I've put in my credentials, the message in the Finder window changes from 'Connecting...' to 'Connection Failed' in a matter of seconds.
    Both have AFP switched on and neither has the Firewall enabled. I also cannot FTP between either computer via 'Connect to Server...', but I can utilise iTunes Home Sharing perfectly.
    I've tried pretty much everything I can find on the WWW, but nothing's worked! Help!
    Thanks!

    Hi, thanks for your help!
    I think I've solved the problem now (at long last!).
    Somehow, my sharing permissions on my Home folder on either computer won't allow me access. I've tried repairing permissions multiple times, but to no avail.
    I've solved the problem by sharing my Macintosh HD, rather than my individual Home folder and I can access everything as normal now.

  • How can I share between 2 different accounts.  we have a clinic that serves pediatics and unfortunately, they set up two different accounts within our agency.

    How can we share between two different accounts on the same iPad?  We have a therapy clinic with 2 devices and want to share apps. I did not set up the second one, but how can we fix this ?

         Hi Rosdy, to get the most out of iCloud it is recommended that you use the same account between devices. Thus whenever you buy something on your phone it becomes accessible from your laptop regardless of whether your synced it over usb or not. *
         For more information on iCloud usage please click here.
    * This feature requires that both devices be on the same WiFi network.

  • How can I home share between a wired and a wireless computer

    how can I home share between a wired and a wireless computer?  I have no problem linking wireless devices, but cannot set up homeshare with a wired PC.

    Maybe you want to describe exactly what you have and what you want to do.

  • File sharing between Mac Mini and iMac "breaks" after reboot of either device, and won't restore.  Why?  Running Maverick 10.9.1 on both.  File sharing is setup on both.  Help.

    I'm a new user - recent convert from longtime Windows to Apple.  Thought having desktops and computing aligned with phones and tablets would help.  Not so far.
    I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1.  File Sharing is set up on both.  If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart.  Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row.  File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem.  Screen Sharing also works between both without fail, and comes up after reboot of either.  No problem there.  Only difficulty is from Mac Mini to the iMac. 
    Why?  Any ideas? 

    Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac.  NEVER happens automatically.
    This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored.  Real bummer.

  • File Sharing between Windows PC and MacBook Pro using Internet Sharing

    I have a MacBook Pro and a Dell Latitude D820 running Windows XP SP2 and I want to connect both using any of these two options. I do not have a wireless router and I use Sprint 3G data card to access internet.
    1) I access the internet using a EVDO data card on my MAC and use Internet sharing to access the internet on my Dell laptop. How do I access the files on my PC from my MAC?
    2) I can have two EVDO data cards to access the MAC and PC independently. How can I setup file sharing between Windows laptop and MAC?

    Hi Dr. Poultry-
    This may be helpful: Mac OS: Connecting to the Internet and sharing files locally at the same time
    Luck-
    -DaddyPaycheck

  • How do I share / unlink  the right and left channel, so I can work with them individually ?

    I use "Adobe Sound Booster CS5"
    I have a stereo soundtrack, which I only want to remove noise in only one channel (right).
    How do I share / unlink the right and left channel, so I can work with them individually ?

    When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
    Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
    The above is some background info. To your current situation, you can use a workaround like:
    * Export your audio file to separate channels by File > Export > Channels to mono files.
    You will get 2 files with _L and _R suffix.
    You can then edit them separately. You can go from Mono to Stereo by the following step.
    Or
    * Choose - Edit > Insert > Channels  into New Multitrack file.
    That will separate the Left and Right Channels and add them to a new multitrack file.
    You can then click the Edit link at the top right of the channel to edit it.
    You can then save that file as a new audio file.
    Dean

  • HT4878 How do i share my pictures, music and videos from one user to another on the same computer?

    How do i share my pictures, music and videos from one user to another on the same computer?

    lots of ways... you could use a thumb drive, you could drag files to the users public folder drop box, you could send it through email, you could use the internet servic called drop box (not to be confused with Apple's user public foldelr drop box).

  • How do I share in the music and apps that my children have purchased, but maintain my own identity?

    How do I share in the music and apps that my children have purchased, but maintain my own identity?

    You don't. Everythng downloaded with one Apple ID can not be transfered to another Apple ID. So you would need to buy it a second time. This is one of the Pit Falls of the whole Download only model.
    That is why I refuse to buy things like music or movies that are tied to a specific User Name, ID.

  • How to provide joins between oracle tables and sql server tables

    Hi,
    I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server.
    how to provide joins between oracle tables and sql server tables ? Any help on this
    Regards,
    Malli

    user10675696 wrote:
    I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server. Bad idea most times. Heterogeneous joins do not exactly scale and performance can be severely degraded by network speed and b/w availability. And there is nothing you can do in the application and database layers to address performance issue at the network level in this case - your code's performance is simply at the mercy of network performance. With a single glaring fact - network performance is continually degrading. All the time. Always. Until it is upgraded. When the performance degradation starts all over again.
    If the tables are not small (few 1000 rows each) and row volumes static, I would not consider doing a heterogeneous join. Instead I would rather go for a materialised view on the Oracle side, use a proper table and index structure, and do a local database join.

  • How can I distinguish between the first and the rest in Smartforms??

    I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Regards,
    Subhasish

    >
    Subhasish Ganguly wrote:
    > I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Hello Vamshi,
    As per the OP's requirement he has to print 3 copies of the invoice. Which according to my understanding should be printed at the same time ? May be i am wrong in interpreting this.
    You must be knowing you can control the print params of the SmartForms in CONTROL_PARAMETERS where you set the NO_DIALOG & in the OUTPUT_OPTIONS pass the number of copies.
    I think the solution you have proposed the "Original Copy" will be printed only once. (Correct me if i am wrong)
    Every time the user prints the invoice again he will be getting a "Duplicate Copy". If this is what the OP wants the logic is perfect
    Cheers,
    SUhas

  • I am new to Apple; how do i toggle between the pc and and overhead projector? Which keys?

    I am new to Apple; how do I toggle between the pc and an overhead projector? Which keys?

    Not sure how your question relates to an AirPort Extreme, AirPort Express or Time Capsule......these products:
    It appears that you have a question about a MacBook Air.  If that is the case, then please post your question in the support area for the MacBook Air linked below:
    MacBook Air

  • How do you file share between mac and pc?

    i need to know how one can share files between a mac and a pc. my MBP is running os x 10.5.2 and my PC is running vista.
    thanks!

    Mac/Windows Networking in Leopard
    The following articles outline how to set up networking between Macs using Leopard and Windows PCs:
    Setting up a Windows computer to share files with Mac users
    Setting up a Mac computer to share files with Windows users
    Sharing with Windows computers
    If you can’t connect to your Mac from a Windows computer
    Sharing your computer with others on your network
    More information is also available by selecting Mac Help from the Finder's Help menu and searching for the relevant terms such as "windows", "networking", "sharing", etc.
    Also read:
    Simple guide to Leopard/Windows Home Networking
    Written by Intercepter121 and originally posted on the Apple Discussions here.
    If your network complies to the minimum requirements described below you should be able to share resources without any need to enter commands in the terminal to modify configuration files in your mac.
    Requirements
    1. A decent router
    2. Mac Os x 10.5.1 installed on your macs
    3. Windows XP or Vista
    4. Number of network devices <10
    5. Some network printers or drives (NAS)
    6. A decent ISP offering a good DNS service
    <u>General Settings
    If your router offers DHCP and any of the device has power saving features there is a risk that the IP addresses are renewed. This can be problematic as the devices keep changing IP addresses. As this is your network is strongly recommended to reserve IP addresses to the MAC (Machine Address Code) of the various devices so that they can power on and off and still keep the same IP.This simple suggestion will greatly improve the browsing of the local network.
    Accessing Windows Resources from Leopard with no authentication
    Windows
    1. Check the settings of the PC and ensure the IP addresses on the local LAN are trusted
    2. Activate sharing on the desired devices ensuring the shares are read and write. If you use Vista ensure password protected sharing is disabled.
    3. Try to access the windows share from another windows computer if available to confirm no authentication is required
    MAC
    1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
    2. Go back into system preferences network. On the tab location click edit locations. Duplicate Automatic and call the new location Home. Now select the Home location and go into Advanced-WINS. In the workgroup field enter the same value that is on the other windows computers for example HOME. Now press enter then go back to the main screen. Select Edit locations and delete the location automatic. Now edit your location Home and rename it Automatic. This workaround is a leopard bug described here.
    3. Give 5 minutes to allow all the other machines to broadcast their IP address and the other computers should appear on the left side of your finder window. You can now select the shares you want to connect. As no authentication is active if you are prompted with a user name just press OK.
    The procedure to access a NAS is the same as above, just ensure permissions are set to files are read/write for anyone to avoid confusion.
    NOTE: There is no need to activate SMB sharing if you don't want to allow the PC to read folders on your MAC
    Troubleshooting
    After you have followed all the steps you don't see any windows PC.
    Identify the IP address of the machine you want to connect. In finder select Option+K and enter SMB://IPADDRESS. If you can connect you have a name resolution problem. Go into your router configuration and ensure that the option DNS assigned by ISP is selected and you don't have services like Open DNS in use and fixed IP addresses in that field. Apply the changes and reboot the router. You should start seeing windows PC in finder shortly after.
    Your ISP DNS service is poor and you must use Open DNS or similar
    If you are forced to use services like open dns you have the risk that the router propagates the DNS servers to your machines. As the implementation of SAMBA in Leopard effectively blocks the MAC to be a master browser for performance reasons you end in a situation in which tiger machines connect and leopard ones don't see a single share. Let's fix it.
    1. Go into System Preferences->Network then advanced DNS if you see here the IP addresses of the open dns servers this is the case. Unfortunately you will be forced to change the hosts file.
    2.Ensure you have reserved IP addresses to all your machines so that they always get the same IP.
    3. Now login into your mac as administrator and go into utilities=>terminal.
    4. Issue the following command sudo pico /etc/hosts
    5. Now scroll down and enter all the IP addresses and computer names of any device you want to browse
    6. Reboot your MAC
    The windows devices will now appear in finder and you will be able to connect with Option+K.
    You cannot access shares even entering the IP address
    You have not reserved IP addresses to each machine. Go into your router LAN set up and make sure that is the case.
    Accessing Leopard resources from Windows
    1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
    2. Go into System preferences->accounts and click on Guest flag the option Enable guest account to access shared folders
    3. Now into System preferences->sharing select file sharing and then options here flag SMB and select the user that has to be logged into the computer when the share has to be accessed. Ensure that the folder you want to share has read/write or whatever permissions you like it to have set for Everyone
    You should now be able to see your MAC in the windows network resources and access the shared folder with a double click without any password request.
    Troubleshooting
    You don't see any MACs from Windows
    Check the firewall settings at the start of this post. Then go back to the Network configuration hit advanced and then TCPIP check is using DHCP and not a fixed address. Then check the sharing is set as above with SMB clicked. If SMB is not set you won't even see your mac from windows.
    You see the MAC and the shared folders but you can't read or write on it
    Ensure you have set the guest account to access shared folders. Then check on the sharing preferences that there is at least one folder with read permission for everyone. The classic case here is Dropbox that leopard sets as read and write for the user of the MAC but no access for other users. You try to click on drop box and receive an error but when you actually try to write a file you can do it. Check the permissions on the subfolders of the share as those permissions will prevail on the home shared folders
    FAQ
    You may want to do more complicated things, but first ensure you can actually share files without security in place so you can identify the root cause of your possible problems
    I want to password protect my windows shares: once you have done the relative set up in windows vista and ensured you can connect from another windows machine you will need to use user name and password of the Vista user to connect.
    I want to password protect my MAC shared folders: Go into user account and disable guest access to shared folders is no shared folder has to be accessed without password otherwise leave it checked. Create a new user for sharing (better than giving away your password) so that this user only accesses the folders you want to share. In System preferences network select file sharing SMB and flag only the new user you have defined. Then go back to the folder section and set the permissions you like on the folder you want to share for this newly defined user.
    Good Luck

  • How do I get pages documents to share between a PC and an IPad?

    I have read the instructions for both the IPad and the PC cloud installation and the document sharing portion. I did everything that the apple website said to do but my documents aren't sharing. Everything is up to date: itunes, pages.  How do i get the documents to share between my two devices?

    In an attempt to be helpful in this thread, I present you with this:
    http://www.insanelymac.com/forum/index.php?showtopic=43983
    The keyboard drivers are in the first post.

Maybe you are looking for