How to fill a symbol with color

How to fill a symbol with color?

Good day!
What do you mean by »symbol« in this case?
Is this on a Layer of its own or is it part of a photograph?
Could you please post a screenshot with the Layers Panel visible?
Regards,
Pfaffenbichler

Similar Messages

  • I HOW I FILL PDF FORM WITH HEBROW ON CHROME ?

    I HOW I FILL PDF FORM WITH HEBROW ON CHROME ?

    Chrome uses its own (incompatible) PDF viewer.
    Download the PDF to your local disk, then fill it from there with Adobe Reader.  Or use a browser that uses the Adobe PDF plugin.

  • How to fill internal table with selection screen field.

    Hi all,
    i am new to sap . pls tell me how to fill internal table with selection screen field.

    Hi,
    Please see the example below:-
    I have used both select-options and parameter on the selection-screen.
    Understand the same.
    * type declaration
    TYPES: BEGIN OF t_matnr,
            matnr TYPE matnr,
           END OF t_matnr,
           BEGIN OF t_vbeln,
             vbeln TYPE vbeln,
           END OF t_vbeln.
    * internal table declaration
    DATA : it_mara  TYPE STANDARD TABLE OF t_matnr,
           it_vbeln TYPE STANDARD TABLE OF t_vbeln.
    * workarea declaration
    DATA : wa_mara  TYPE t_matnr,
           wa_vbeln TYPE t_vbeln.
    * selection-screen field
    SELECTION-SCREEN: BEGIN OF BLOCK b1.
    PARAMETERS : p_matnr TYPE matnr.
    SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
    SELECTION-SCREEN: END OF BLOCK b1.
    START-OF-SELECTION.
    * I am adding parameter value to my internal table
      wa_mara-matnr = p_matnr.
      APPEND wa_mara TO it_mara.
    * I am adding select-options value to an internal table
      LOOP AT s_vbeln.
        wa_vbeln-vbeln =  s_vbeln-low.
        APPEND  wa_vbeln TO  it_vbeln.
      ENDLOOP.
    Regards,
    Ankur Parab

  • Filling an outline with color

    I'm using Illustrator CC.  When I draw an outline with either the pencil tool or the paintbrush tool, I can't fill it in with color, even though the path appears to be closed.  The "fill" square has a red diagonal line through it and won't switch to a color.  Any help would be appreciated.
    Thanks,  Ann

    Red slash is nothing to worry about, that just means measn fill of none.
    Make sure you have the path selected, and then try using the appearance palette instead to fill. You can either click on the arrow and do a dropdown as in the screenshot. Or as you can see the fill is highlighted (light blue running in back of the word Fill) and then click on a swatch in swatches.
    You can also double lcikc on the pencil tool, adn enable fille new pencil strokes.
    which will then use your fill and stroke colors.

  • Photoshop CS6 - How can javaScript fill blank layer with color?

    Hello,
    I'm a production artist and I work with PSD files that were created in Adobe Scene7 Image Authoring Tool. These PSDs contain a background layer along with 1-20 alpha channels. My script has to make new blank layers based on the number of alpha channels and then it has to fill the new layers with light gray. The RGB values are 161, 161, 161. I checked the PSCS6 JavaScript Reference pdf, but I don't see a method that would do this for artLayers. (Let me also say that I'm new to javaScript).
    Does anyone know how to fill a blank layer with these RGB values?
    Here's my script so far:
    #target photoshop 
    // declare variable to contain the active document
    var myDoc=app.activeDocument;
    // declare variable to contain the number of alpha channels, excluding the RGB channels
    var alphaChan = myDoc.channels.length - 3;
    // create loop to make new layers based on number of alpha channels and fill each layer with gray
    for (a=0; a<alphaChan; a=+1){
    myDoc.artLayers.add();
    if (myDoc.artLayers.length == (alphaChan + 1)) {
        break;

    var color = new SolidColor();
    color.rgb.red = 161;
    color.rgb.green = 161;
    color.rgb.blue= 161;
    myDoc.selection.fill(color);

  • In sm30, when save, how to fill the table with the system data in the table

    Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

    Hi ,
    Do like this.
    1. Go to SE11 -> give your table name and press on change button .
    2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
    3.Assign Functin group if already have one , other wise create function group and assign
    4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
    5.Click on new entries
    ->Now press F4 in T column . Select<u> "01" - Before saving the data in the database</u> and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
    ztable-username = sy-uname.
    ztable-createtime = sy-uziet.
    check and activate the code .
    With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
    Don't forget award points if it helps you.
    Regards,
    Raghav

  • How to fill internal table with no data in debugging mode

    Hi all,
             I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
    Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
    Thanks,
    Balaji

    Hi,
    In the debugging do the following..
    Click the Table button..
    Double click on the internal table name..
    Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
    Use the APPEND button to insert records to the internal table..
    Thanks,
    Naren

  • How to fill an array with random numbers

    Can anybody tell me how I can fill an array with thousand random numbers between 0 and 10000?

    import java.util.Random;
    class random
         static int[] bull(int size) {
              int[] numbers = new int[size];
              Random select = new Random();
              for(int i=0;i<numbers.length;i++) {
    harris:
    for(;;) {
    int trelos=select.nextInt(10000);
    numbers=trelos;
                        for(int j=0;j<i;j++) {
    if(trelos==numbers[j])
    continue harris;
    numbers[i]=trelos;
    break;
    return numbers;
    /*This method fills an array with numbers and there is no possibility two numbers to be the
         same*/
    /*The following method is a simpler method,but it is possible two numbers to be the same*/
    static int[] bull2(int size) {
         int[] numbers = new int[size];
    Random select = new Random();
    for(int i=0;i<numbers.length;i++)
              numbers[i]=select.nextInt(9);
              return numbers;
         public static void main(String[] args) {
    int[] nikos = random.bull(10);
    int[] nikos2 = random.bull2(10);
    for(int i=0;i<nikos.length;i++)
    System.out.println(nikos[i]);
    for(int i=0;i<nikos2.length;i++)
    System.out.println(nikos2[i]);

  • How to fill combo box with list of all SQL server

    Ok, I know how to find all SQL servers that I need, I have code for that task, and I have Array of all servers.
    My problem is ...
    I made setup project and do a huge work, and in the end this task appear!
    I used ORCA tool to change TextBox (A) template in visual studio (2008 by the way), and I transform first TextBox to ComboBox.
    Now, the little part that I'am missing is how to fill this combo box with a result of my function for listin SQL servers?
    Can I somehow send combobox object to myMethod:
    private void FillCombo(ComboBox cmb)
          // do the job
    or
    instanceOfThisCombo.Items.Add(listOfSQLServers);
    please help me to solve this... thanksc#

    Hi Valerij,
    The ComboBox control in an MSI dialog uses the ComboBox table to populate the items in it. To get what you want, you need to update the ComboBox table in the MSI package with your application and run the MSI package. The following KB article describes how to dynamically populate a ListBox control in Windows Installer:
    http://support.microsoft.com/kb/291329
    This method introduced in the above KB article also applies to populating a ComboBox control in Windows Installer.
    I don't think it's possible to run the application as a Custom Action from within the MSI package because the application will modify the content of the MSI package which is currently running. So you need to launch the MSI package from within your application after updating the ComboBox table. In short, when installing, just run your application which updates the ComboBox table and install the MSI package.
    Hope this helps.
    If you have any question, please feel free to let me know.
    Sincerely,
    Linda Liu

  • How to export table data with coloring of cell according to value.

    Hi all,
    I am using jdeveloper 11.1.1.6
    i want to export table data with lot of formatting. like with coloring of cell according to value and so many.How to do that?

    Hi,
    like with coloring of cell according to value and so many.How to do that?
    Answer is, you can't
    Frank

  • Paint or Fill a pixel with color

    Greetings I am a very beginner with java 2D, I am going to design an applet simulator about artificial life. To start I want to know how to paint a pixel with any color. example
    Graphics g
    g.fillPixel(Point x, Point y, Color.ANY)Thanks by your help.
    Cordially
    Andrei
    Message was edited by:
    andreihortua

    The most efficient way to paint a pixel in Java2D is fillRect(x, y, 1, 1);
    Both drawLine and drawRect typically have higher overhead.
    Dmitri

  • How to delete a symbol with a click of a inside button

    Hello,
    I have this Symbol with a button inside. I want to click on this button and delete the Symbol.
    I have the code below but it doesn't work.
    sym.getComposition().getStage().getSymbol("vitrine_content").$("cachedarmes_movie").delete Symbol();
    if I try to do animate the symbol. It works :
    sym.getComposition().getStage().getSymbol("vitrine_content").$("cachedarmes_movie").animat e({'left':'200px'});
    And I don't see why..
    thanks
    s.

    Thanks. I ve tried it and it deletes the uppermost Symbol just after the Stage.
    The STAGE -> vitrine_content-> cachedarmes_movie...

  • How to use Field-symbol with dynamic select query

    Can anybody tell me, how to use field-symbols in the dynamic select query.

    FIELD-SYMBOLS <fs> { typing | STRUCTURE struc DEFAULT dobj }.
    1. ... typing
    2. ... STRUCTURE struc DEFAULT dobj
    The FIELD-SYMBOLS statement declares a field symbol <fs>. The name conventions apply to the name fs. The angle brackets of the field symbols indicate the difference to data objects and are obligatory. You can declare field symbols in any procedure and in the global declaration section of an ABAP program, but not in the declaration section of a class or an interface. You can use a field symbol in any operand position in which it is visible and which match the typing defined using typing.
    After its declaration, a field symbol is initial - that is, it does not reference a memory area. You have to assign a memory area to it (normally using the ASSIGN statement) before you can use it as an operand. Otherwise an exception will be triggered.
    eg.
    FIELD-SYMBOLS <fs> TYPE ANY.
    DATA: BEGIN OF line,
            string1(10) VALUE '0123456789',
            string2(10) VALUE 'abcdefghij',
          END OF line.
    WRITE / line-string1+5.
    ASSIGN line-string1+5(*) TO <fs>.
    WRITE / <fs>.
    output:
    56789
    56789
    reward if helpful
    anju

  • How to replace one symbol with another?

    I have a symbol with some very basic animations. I would like to set conditions upon which one symbol is swapped out for a symbol in a library. Each symbol is the same size, but so far I can't seem to get this right. I've attempted createChildSymbol but nothing really works.  I've got it set up as:
    My Stage:
    container0container (rectangle)
    container1container (rectangle)
    container2container (rectangle)
    button1
    button2
    My library symbols:
    Symbol_1
    Symbol_2
    Symbol_3
    Symbol_4
    Symbol_5
    I want to be able to click button 1, and replace the container1>container with container1>Symbol2 and then play the animation associated with container1
    Can anyone advise me on this?

    Not sure if it is what you want but try this:
    sym.$('down_btn').click(function(){
    var firstS = sym.createChildSymbol("Symbol_1", "container1");
    sym.play('down1');
    sym.$('up_btn').click(function(){
    var firstS = sym.createChildSymbol("Symbol_2", "container1");
    sym.play('up1');

  • How to fill selection box with clientside data?

    i want to make a html form that reads option values from the client.
    Because there are too many data, it's not reasonable for me to design a page which connects to server each time to fill the selection boxes.Instead i want to check if data resides at the clientside, if so fill selection boxes with that data, if not download it for the first time and store it on the client for later local retrieval.In addition i must be able to update that data residing on the client when i want.

    Hi,
    I can tell you some hints. Use cookies to store the information on to the client-side. You can read data from cookies using JavaScript. If you want to store huge amount of data on to the client-side, perhaps this would not be a better idea. In J2EE architecture we often use sessions to store values. You need to design your implementation in such a way that for the first time you fetch all the values from the database and put it in a session, and the next time onwards you can get the values from the session itself and thereby you can avoid going to database each and everytime. Write a Java class which has all the necessary get and set methods and store the object in the session. Using that object reference you can set and get the values from it. I hope this will help you.
    Thanks

Maybe you are looking for

  • When downloading a file, if I right-click and select new the submenu is not displayed

    I have Firefox 12 installed; running XP SP3. Options/General/Always ask me where to save files is selected. If I download a file and select save file, I will get a save file to dialog. If I right-click in the dialog and select new, there is no submen

  • How do I create tabs for pdf documents?

    I need to create tabs for documents I am saving as a single pdf file.

  • What does the exclamation point mean?

    When I try to view photos in iPhoto '08 and increase their size, all I see is a graphic exclamation point.  What does that mean?

  • Forms User Exit calls

    Hi, I am trying to make a user_exit call in Forms9i. I have created a Pro*Cobol file as specified and created a form with user_exit calls. Everything has compiled. My platform is win2k. The place where I am stuck is I don't know how to create an envi

  • 4 Aironet 1252's with 2.4 & 5 GHz Radios

    I just deployed 4 1252 Aironets.  I had some reports of connections coming up and dropping.  I think the issue is how the radios are tuned in them.  I am using multiple SSID's and VLAN's.  One of the SSID's is configured for both the 2.4 & 5 GHz.  My