How to fill BKPF-XREF1_HD or BKPF_XREF2_HD in transaction F-43.
I would like to fill field XREF1_HD or XREF2_HD in T-Code F-43, however, I couldn't.
How to fill BKPF-XREF1_HD or BKPF_XREF2_HD in transaction F-43.
Is it impossible to fill the fields in F-43 ?
Regards
Chul Woo.
Copuld you please share how you achieved this point?
Thanks.
Federico
Similar Messages
-
How we can use XREF1_HD field of BKPF table.
Hi,
How we can use XREF1_HD field of BKPF table.
Ritu VermaHello,
Sadashivan is absolutely right.
You can update this field while posting with using standart substitution or using Business transaction event 00001120.
If you use BAPI_ACC_DOCUMENT_POST and want to fill this fields, you can use RWBAPI01 business transaction event also.
Regards,
Burak -
Enterable field BKPF-XREF1_HD(Ref.key (header) 1)?
Hi
Friends,
Does anyone know how to make the XREF1_HD and XREF2_HD fields on table BKPF available so they may be populated during document entry (FB01, FB50, etc.)?
I know there is no cofiguration for this., only through substitution we can able to display.
(Q) How to do substitution for the above subject? How to make this field enterable during document entry.
Thanks
AnilHi
Friend,
Iam working for US Client, I have an issue.
Special handling code u2013 Identify a field in Vendor master or Vendor Invoice and pass this data on to IDOC
HQ1 - Check to be sent to XXXX HQ or to vendorIdentify a field
FX1 u2013 To vendor address by Fedex
(Q) we have to give this code in XK01 or FB60? for this purpose I need Ref.key (header) 1), It is 3digits No code. I can use Ref field in BKPF, but already am using this field.
Thanks
Anil -
How to add fields to already loaded cube or dso and how to fill records in
how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?
This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382 -
How to fill internal table with no data in debugging mode
Hi all,
I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
Thanks,
BalajiHi,
In the debugging do the following..
Click the Table button..
Double click on the internal table name..
Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
Use the APPEND button to insert records to the internal table..
Thanks,
Naren -
How to fill the values in List Box?
Hi Experts,
Can anyone explain me how to fill the values in the List Box such that the value should be from the table?
For Example : Fill the EmpID from table T1 into the ListBox?
Thanks in Advance,
Regards,
Raghuhi,
and u doing it through report means from se38 than here is code...
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE mara-matnr,
END OF itab.
DATA : ok_code LIKE sy-ucomm.
CALL SCREEN 0200.
*& Module STATUS_0200 OUTPUT
text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'Z200'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'BACK' OR 'UP' OR 'CANC'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module mat_val INPUT
text
MODULE mat_val INPUT.
SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE itab
WHERE matnr BETWEEN '000000000000000101' AND '000000000000000109'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MATNR'
VALUE_ORG = 'S'
tables
value_tab = itab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " mat_val INPUT
<b>And this is flow logic..</b>
PROCESS BEFORE OUTPUT.
MODULE status_0200.
PROCESS AFTER INPUT.
MODULE user_command_0200.
PROCESS ON VALUE-REQUEST.
FIELD itab-matnr MODULE mat_val. -
How to fill dropdown list in Adobe form
Hi Experts,
I am new to adobe form.Please tell me ,how to fill drop down list in adobe form?
Thanks,
HansHello Arafat,
I am using a drop down list in Adobe Interactive Form for Web Dynpro ABAP.
The form is of ZCI type layout and the form interface is of XML schema-based interface type and the XML schema source is set to "Generated".
I have included the following code in WDDOINIT method of the view:
data: handle1 type ref to if_wd_context_node,
begin of zstruct,
zktokd type kna1-ktokd,
end of zstruct,
zitab type table of zsttxecr.
handle1 = wd_context->get_child_node( name = 'DATA.NODE1' ).
select ktokd from kna1 into corresponding fields of zstruct.
append zstruct to zitab.
endselect.
handle1->bind_table( new_items = zitab ).
In the Adobe Form Designer, i have binded the node NODE1 to the enumerated drop down list from native web dynpro library. Still the drop down box is not getting populated.
Please let me know what is missing.
Thanks and Regards. -
How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W -
How to Fill value in Input fields before displaying ADOBE FORM
Hi to all,
Please can anyone tell me how to fill the entry in ADOBE FORM before displaying?
I have written a program to generate ADOBE FORM, but I need while displaying ADOBE FROM some input field should already be filled by value and can not be changed.
Please can anyone tell me how to do that in program?
Below is the program.
DATA: fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams.
Parameters: p_pdf_form_name type fname.
fp_docparams-langu = 'E'.
fp_docparams-country = 'IN'.
fp_outputparams-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = p_pdf_form_name
IMPORTING
e_funcname = fm_name.
E_INTERFACE_TYPE = E_INTERFACE_TYPE
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
IMPORTING
/1BCDWB/FORMOUTPUT = fp_outputparams
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Jul 25, 2011 2:57 PMHello,
you need to provide the information via the interface, which you create for the Adobe form.
And then pass this values via the following function module inside your generation report.
CALL FUNCTION fm_name
check standard report : FP_EXAMPLE_01 as an example! -
How to fill forms in adobe reader with lithuanian fonts?
How to fill forms in adobe reader with lithuanian fonts?
when i switch on my pc alt+shift to lithuanian language i can only use 2 lithuanian fonts, for other lithuanian fonts i get only blank
could someone help me to solve this case?Adobe Acrobat. A bit expensive just to change the document background...
-
How to fill the gaps in SAP Fico configuration
Hi Guys,
Can anyone please explain me that how to fill the gaps in SAP FICO implementation project
Thanks in advance
VasuHello,
Perhaps you might find some useful info here http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/36/f1a5e16cde4121acc69a91728b9082/frameset.htm
Regards,
Paul -
How to fill the master data in ecc
Hi,
0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
Regrads,
devi.Hi Devi,
Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data.
BDC and LSMW both are used for loading data into SAP system.
Or ask even directly they can create in ECC. If it is for your testing purpose, it is better to ask them to create master in source system .
Thanks
BVR -
How to fill a symbol with color
How to fill a symbol with color?
Good day!
What do you mean by »symbol« in this case?
Is this on a Layer of its own or is it part of a photograph?
Could you please post a screenshot with the Layers Panel visible?
Regards,
Pfaffenbichler -
How to fill in a text box on a pfd form downloaded from the internet
I am desperate to know how to fill in text boxes on a pdf form that has been downloaded from the internet
Usually you just click in it and start typing... If that's not working then maybe what you're seeing is not a real text field.
In that case you can probably use the Add Text Comment tool under the Comment panel to add text to the file. -
How to fill field with test data in alv grid display
hi all,
i m adding field TEXT to the structure for displaying grid.
i m modifying program like this
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
TYPES : BEGIN OF FS_OUTPUT .
TEXT(20) TYPE C.
INCLUDE STRUCTURE HRPDV_EXPIRED_Q.
TYPES TEXT(20) TYPE C.
TYPES END OF FS_OUTPUT.
DATA: fs_output like table of alv_output.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'TEXT'.
WA_FIELDCAT-seltext_l = 'Abteilungs Struktur'.
wa_fieldcat-tabname = 'ALV_OUTPUT'.
WA_FIELDCAT-COL_POS = '13'.
APPEND WA_FIELDCAT TO P_GT_FIELDCAT.
this is what i have write for diapalying field. but my question is how to fill test data with field TEXT.I m writing like this but not executed in the aboove grid dispaly statement.
loop at alv_output.
*alv_output-text(20) = 'abcdefgh'.
*modify alv_output.
*endloop.
plz tell me how to fill test datahI..,
Your table declaration has to be like this..
TYPES : BEGIN OF FS_OUTPUT .
INCLUDE STRUCTURE HRPDV_EXPIRED_Q.
TYPES TEXT(20) TYPE C.
TYPES END OF FS_OUTPUT.
DATA: ALV_OUTPUT LIKE standard table of fs_output initial size 0.
loop at alv_output <b>into fs_output</b>.
<b>fs</b>_output-text(20) = 'abcdefgh'.
<b>modify alv_output index sy-tabix from fs_output transporting text.</b>
endloop.
Now give this table alv_output to the GRID_DISPLAY function module..
you will get the required output !!
Plz do remember to close the thread when ur problem is solved !!
reward all helpful answers !!
regards,
sai ramesh
Maybe you are looking for
-
when i receive e-mail from friends who use aol, my i-mail program always categorizes them as junk mail even though i have the sender in my address book. i have checked and the "exception" box for "senders address in my address book" is checked in jun
-
Hai Guru's, Can any body send info.spec reg.service products, Iam in urgent need of it. I would be grateful if any one of u send info. my mail id. [email protected]
-
Change in Invoice percentage to be updated automatically in Contract
Hi, I am creating wbse in my project and assigning milestones to it.I am assigning various invoice percentages to these milestones. I am copying these milestones details into Sales Contract. Later on I am changing the invoice %age in milestones. My
-
A chart with an X axis ?
I have equispaced X data and am using stacked plots to show three different values from a measurement. Is it possible to wire a 4-tuple (X, Y1, Y2, Y3) in the form of an array to the input of a chart and get a realtime XY1Y2Y3 plot (stacked) ? Solve
-
I do not want to pay for it. I accidentally deleted it because it showed up twice on my launchpad thanks!