How to fill in a text box on a pfd form downloaded from the internet

I am desperate to know how to fill in text boxes on a pdf form that has been downloaded from the internet

Usually you just click in it and start typing... If that's not working then maybe what you're seeing is not a real text field.
In that case you can probably use the Add Text Comment tool under the Comment panel to add text to the file.

Similar Messages

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
Is it tall like this.
Then it is Gen5.
otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
Open the Airport utility and give us a screenshot of the summary page.
That will also help us determine that you have the TC, which version and how it is setup.
You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
You do not do anything in the TC.. set it up in the Ubee router.
Port forward 548 to the TC in the Ubee router.
And make sure the TC has a static IP in the Ubee router.
Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
You are fighting hard because Apple made this hard.. not easy.

How to I add Camera Raw presets I've downloaded from the internet?

How to I add Camera Raw presets I've downloaded from the internet? I have a mac and I use Creative Cloud.

Presets are stored under Library>Application Support>Adobe>Camera Raw>Settings. Install them there. Once done, load the settings:
Benjamin

How do I stop click-thru "'Firefox' is an application downloaded from the Internet. Are you sure you want to open it?"?

Every single time I launch Firefox 20 under Mac OS X 10.7.5 I get the click-thru warning message "'Firefox' is an application downloaded from the Internet. Are you sure you want to open it?". How do I stop this? There are internet postings and previous postings about solving this using Terminal commands for OS X 10.5.x & 10.6.x, but these commands do NOT work in 10.7.x or 10.8.x. This seems to be a Firefox ONLY issue, and solving it by globally turning off OS X security features as recommended before in a previously closed thread seems like a really BAD solution. Is there a "Firefox only" solution, or will I just have to stop using Firefox?

I had upgraded to Firefox 20 using the automatic update process, so the last time I'd downloaded a .dmg and manually installed Firefox was a long time ago. I trashed Firefox 20, downloaded a new .dmg and manually transferred to Applications folder and this persistent message ended. I assume if I'd ever launched from the open .dmg the same error message would result, so the fix offered was a solution even though the cause was something different since I only used the automatic update process and never manually handled Firefox .dmg downloads.

Everytime i open a safe website I get this message ""ai-13.php" is a script application downloaded from the Internet. Are you sure you want to open it?" How do I get this to stop?

Question
Everytime I open a safe website I get this message "“ai-13.php” is a script application downloaded from the Internet. Are you sure you want to open it?" How do I get this to stop?

WZZZ,
Thanks, the following command (ran as root) worked for me!
xattr -d com.apple.quarantine /Applications/Google\ Chrome.app
Chrome is set to start on launch, so I'd get the following warning on every start/restart
Google Chrome” is an application downloaded from the Internet. Are you sure you want to open it?

How do I disable this - "Firefox.app" is an application downloaded from the Internet. Are you sure you want to open it?

how do I disable this - “Firefox.app” is an application downloaded from the Internet. Are you sure you want to open it?

If you want to open it confirm that you do. You will not be asked that question again after the first time you open it
Unless you are keeping Firefox in the .dmg it was downloaded in. That is to say, if you obtained Firefox in a .dmg, and you have kept the .dmg mounted, and are launching Firefox from the mounted .dmg, then you will ALWAYS get that warning. You should copy Firefox from the mounted .dmg to your Applications Folder (or anywhere you prefer), and then eject the mounted .dmg. Unless you need to install Firefox on another system, you can then delete the .dmg.

How do I get downloads from the internet to open in something other then text edit?, How do I get downloads from the internet to open in something other then text edit?

Lots of times when I download files from the internet like games or something they will open up in text edit. When it comes up its just a bunch of letters and numbers, it won't actually run the application. How do I get the file to open up correctly and actually run?

Hi, do you have a link to one of these you downloaded that does this?
Basically you, in the Finder, do a Get Info on it, look for Open With & choose the proper application, but might these be Windows® only games?

How do I connect my text boxes to allow one to overflow into the next?

In older versions, you could create a text box on one page and have it flow into a text box into a different page. How do I do this in the newest version? It's a pretty important function!

Pretty well stuffed up in Pages 5.
You select the Textboxes > Format > Arrange > Unite
This makes them one masked shape with no control over textflow and does not let you link from one page to another or any custom textbox order.
As with virtually every answer here the solution is to use Pages '09 which should be still be in your Applications/iWork folder.
P

How do I save images downloaded from the Internet?

I have the URL to an image stored on the Internet. Is it possible to open a connection and store the image on my computer? I'm not totally new to this, I've written a small program that could read text files from an ftp server, but it's my first try at downloadning images. Here's the code I'm using
String wwwfile = ....;
               System.out.println(protocol+host+wwwfile);
                    URL url = new URL(protocol+host+wwwfile);
                    URLConnection urlc = url.openConnection();
                    InputStreamReader reader = new InputStreamReader(urlc.getInputStream());
                    File file = new File(path,fileName);
                    OutputStreamWriter writer = new OutputStreamWriter(new FileOutputStream(file));
                    int c;
                    while((c = reader.read())!=-1)
                    writer.write(c);
                    reader.close();
                    writer.flush();
                    writer.close();
When I read text files, I used BufferedReader/PrintWriter instead of InputStreamReader/OutputStreamReader. The picture I want to download seems to be downloaded, it's stored on the computer, but upon viewing the picture, the browser displays the icon telling me the picture is abscent.
What is it that I'm doing wrong?
regards
simon

Ah, this might be the problem. You're using an InputStreamReader and OutputStreamWriter to wrap the streams with reader/writers. This is bad. This will corrupt binary data.
Try this:
        System.out.println(protocol + host + wwwfile);
        URL url = new URL(protocol + host + wwwfile);
        URLConnection urlc = url.openConnection();
        // Use InputStream/OutputStreams instead of Reader/Writers for binary data.
        // Otherwise it will get corrupted.
        InputStream in = urlc.getInputStream();
        File file = new File(path, fileName);
        OutputStream out = new BufferedOutputStream(new FileOutputStream(file));
        int c;
        while ((c = in.read()) != -1) {
            out.write(c);
        in.close();
        // You don't have to flush the file if you're
        // closing it right after.
        out.close();

How do I open apps downloaded from the internet on my macbook?

I downloaded an app from the Avery website to create labels. When I download the app and try to open it i get a garbled message. Any idea how I can open the app?

I was not given an option of which to download. I have this problem all the time and someone told me how to fix it once, but I cannot remember what the answer was.

I can't fill in or edit a box in a form I downloaded from the internet to sign

I had to download a document and sign it on adobe reader. I was able to fill it in and sign the document, but when I saved it, there was an error. Now I can't edit what I wrote in those boxes. please help.

EDIT: I just found something in the more like this section next to this post and was able to fix it.
The name of the post is "Re: Cannot add, edit, or delete contacts."

How do I open a .fdf file downloaded from the internet?

Hello =-D
   I have been on a website many times in the past and opened pdf files. Today however, I have been trying to download an adobe file, and its showing up as a .fdf file. When I click to open (or drag and drop) I keep getting this error message:
This PDF is attempting to launch:
[insert file location here]
Are you sure you want to continue?
[Yes]
[No]
     When I click on yes, I get the same repetitive error message and nothing opens. I have tried about 30+ yes's and still nothing.
I am running windows 7 professional with Adobe XI. I know I have opened this file on this computer in the past, I do not know why it will not open now. It has been about 8 months since I have tried though...
Thanks peeps =-)
~Firedogjoe

Hi Graffiti,
   Thank you for providing the website... After looking over the website you provided, I am still a bit confused. I will break it down for ya =-)
FYI, I am not that computer savvy, but I am sure you will figure that out by the end of this post...
It states:
   The easiest is when the PDF is set up to import the FDF
programmatically (using a JavaScript to import the FDF), or has the
Import FDF action. In both cases, the FDF file name is specified.
Q: How do I get Adobe to set up PDF to import FDF programmatically?
It states:
   Another possibility is if the FDF has the reference to the "base PDF"
included. In this case, opening the FDF will automatically load the
according PDF. If the base PDF is already open, the data gets
imported immediately.
Q: How do I know if the FDF has a reference to the "base PDF"?
Statement: If it should "Load automatically", I would not have an issue... or am I reading this wrong?... #confused
It states:
   You can also try to open an FDF file which does not have the
reference to the base PDF; it will then ask for the PDF to be loaded
into.
Q: How do I know if the FDF does not have a reference to the "base PDF"?
statement: Nowhere do I see it asking for the PDF to be loaded...
Thank you
~Firedogjoe

How to implement an app in a bridge to grab input stream from the Internet

I set up a pc as a linux-based (Red Hat 9.0) bridge device at first. The pc got two NICs, both of their IPs set as 0.0.0.0. Just now, whole the LAN can uses the pc as a transparent bridge to communicate with external network without change any network setting.
Consider to monitor the data stream between LAN and external network. I try to implement a sniffer-like app in the bridge device now.
Below is a portion of my sniffer app, as I run the app in the bridge device, the outcoming result will be:
print test line 01
not my expected result:
print test line 01
print test line 02
Can anyone help me to clear my idea?
public grabInputStream()
     String t = "";
     int listenPort = 80;
     try
          ServerSocket serverSocket = new ServerSocket(listenPort);
          System.out.println("print test line 01");
          Socket listenSocket = serverSocket.accept();
          System.out.println("print test line 02");
          InputSream listenInputStream = listenSocket.getInputStream();
          while (listenInputStream.available()>0)
               t+=(char)listenInputStream.read();
     catch (Exception e)
          e.printStackTrace();
}

Using available() is a bad way to check if the stream is still open.
Reread the documenation on available to see while.
Just read only byte at a time until the stream ends. See the javadoc on read() to see how.
Note: a byte is not a char and a single char can take up 2 or 3 bytes.
Using a String like this is both inefficient and incorrect.
I suggest you use apache's IOUtils class to convert an InputStream into a String.

How to disable "This file was downloaded from the internet" prompts?

They're annoying. I always say "yes" and I think they cause problems sometimes when I use these files with Terminal. How do I get rid of them, if I can?

If you do that, you may lose the new XProtect malware detection feature as well. See
About file quarantine in Mac OS X v10.5 and v10.6

How do I disable the feature that asks, "...is an application that was downloaded from the Internet. Are you sure you want to open it?" I get this message every time I double-click to unpack a zip file.

I am using Firefox 6.0 (I know it's an older version, but I am a doctoral student at a university that is whose system is, at this time, only compatible with this version) on an Intel Mac.

If using a mouse, you can right click on the application installer this will give you an "Open with" popup and you can chooes to open the application installer using the standard installer.
Another method to do the same exact thing is to hold the Control key while left clicking on the Application installer will give you the exact same popup menu.

How to fill in a text box on a pfd form downloaded from the internet

Similar Messages

Maybe you are looking for