How to fill out an applicationi have downloaded

I have downloaded an application and when I click on line to start filling it out it highlights line but will not tyoe

Make sure you have the very latest version of Reader (XI), by going here: Adobe - Adobe Reader download - All versions
If you still can't fill it in, maybe it doesn't actually have form fields in it. You can then use the commenting tools to add text to the file.

Similar Messages

If I want to fill out estimates and have created a fill and sign form;

If I want to fill out estimates and have created a fill and sign form; do I have to access formscentral everytime or is there a way to save the fill and sign form that is readable on my tablet?

The clouds you see next to your music on the device and iCloud are two different things. When your music is not on your device it is in iTunes in the Cloud. Not the same thing as iCloud which is used to sync information between devices and house backups of your device contents. So that little cloud you see next to your songs is telling you that the music is not on your device. That's why it is giving you the message - because when you click on it, it is attempting to download it to your device.
What may have happened is when you imported your photos to the PC, you may have sync'd your device via iTunes, and you did not have the Sync Music option checked in your device Profile screen.
Hook up your device to your PC and open iTunes. Make sure the sidebar is showing (Control+S if you cannot see the sidebar with Devices listed), and click on your device to open the Device Profile screens to the right. Click on the Music tab, and make sure that the Sync All Music or Sync Selected Music box is checked. If you have Sync Selected Music checked, then below that, make sure you check all music that you want on your device. Then click on SYNC at the bottom (or APPLY).
Once you have successfully sync'd your music to your device, you will no longer see the cloud next to the songs, and you also will no longer get a message since you will have the songs physically on your device and not in iTunes in the Cloud.
Cheers,
GB

I have been suggested to down grade to 10.6.6 due to issues with Adobe and Apple working things out. I have downloaded 10.6.6 but wont let me install. Any ideas?

I have been suggested to down grade to 10.6.6 due to issues with Adobe and Apple working things out. I have downloaded 10.6.6 but wont let me install. Any ideas?

Yes, simply reinstall from your Snow Leopard installer disc. The reinstall will not erase the hard drive. After reinstalling you can upgrade to 10.6.6 with your updater.

HT4847 how do i access movies I have downloaded from itunes and permanently erase them from my cloud?

how do i access movies I have downloaded from itunes and permanently erase them from my cloud?

Hey okapi22,
Thanks for the question. Assuming you are attempting to clear up iCloud storage, it's important to note that iTunes purchases do not count against this storage. For more information, see the following:
Your iCloud storage is used for iCloud Backup, app data and documents stored in iCloud, and iCloud Mail (your @icloud.com email account).
iCloud: iCloud storage and backup overview
http://support.apple.com/kb/PH12519
Additionally, you are not able to delete purchases from iTunes in the Cloud, but you are able to hide them. Take a look at the following article:
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919
Thanks,
Matt M.

How to find out if I have Solaris v11.0 or v11.2? Where is 64bit Solaris?

How can I find out if I have Solaris v11.0 or v11.2 installed?
Does Solaris "2010.11" mean Solaris 11 or Solaris 10?
Assume I have installed Solaris 10 or Solaris 11.0:
Can I update Solaris with the integrated Update Manager to Solars 11.2 or do I have to install a new Solaris 11.2?
Finally when I go to Solaris 11 download web page
http://www.oracle.com/technetwork/server-storage/solaris11/downloads/install-2245079.html
I miss a x64bit Solaris download link.
I found only an x86 version (which means 32bit for Intel CPUs)
Thank you
Peter

There are two places to look for versioning information:
$ uname -v
That will return 11.0, 11.1, 11.2 etc
Strictly speaking that is only the kernel version but unless you do "very advanced" things with packaging it is acurrate.
$ pkg info entire
That will get you information about which SRU (patch) level you are at.
As for 64 bit that is the 64 bit version. For Solaris the term "x86" means Intel/AMD compatible processor. Solaris 11 only boots on 64 bit SPARC and Intel/AMD processors.
Since Solaris 7 there has been support for running both 32 bit and 64 bit applications on a 64 bit kernel. Solaris 11 only delivers a 64 bit kernel for all supported processors.

How to fill out form fields in Adobe Reader

I was set a PDF, from my employer, but am unable to fill out form field, and sign it using Adobe Reader. I have an I Mac, with the latest OS, and a free version of Adobe Reader.

Make sure you have the very latest version of Reader (XI), by going here: Adobe - Adobe Reader download - All versions
If you still can't fill it in, maybe it doesn't actually have form fields in it. You can then use the commenting tools to add text to the file.

How to find out which Tables have been accessed without looking at the SQL query ?

Hi,
I would like to know is there a way to find out what queries have been executed and on which tables without looking at the SQL query.
I have an old C++ code which calls some library functions to access the Oracle database. The source code for the library is not available to me yet. The functions selects/updates/deletes and inserts based on some input parameters I give. I do not know which tables it affects. How do I find out the actual SQL query and/or the tables it accesses ? I was told about V$SQL table that
has the most recently executed queries, but
I did'nt see any queries connected to my process.
Could anybody help me on this ?
Thanks
Jagdeep
[email protected]
null

PRECISE/SQL can help you if you have access to it
2nd option can be that turn on SQL_TRACE
Run executable of ur c++ program
it will create a trace file in user_dump_dest
and then using TKPROF u can see all quesries and their plan also.
HTH
Gagan Deep Singh
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by (jagdeeps):
Hi,
I would like to know is there a way to find out what queries have been executed and on which tables without looking at the SQL query.
I have an old C++ code which calls some library functions to access the Oracle database. The source code for the library is not available to me yet. The functions selects/updates/deletes and inserts based on some input parameters I give. I do not know which tables it affects. How do I find out the actual SQL query and/or the tables it accesses ? I was told about V$SQL table that
has the most recently executed queries, but
I did'nt see any queries connected to my process.
Could anybody help me on this ?
Thanks
Jagdeep
[email protected]<HR></BLOCKQUOTE>
null

How to find out which documents have been indexed?

Hi,
How can we find out which documents have been indexed by intermedia - I get a lot of errors when i look in ctx_user_index_errors - but how can I relate or find which error row means which row or document in the table on which the index is created??
Thanks
Dhwanil Shah

You can enable the log to see what's going. That will tell you the exact number of documets that failed.

How to fill out POST HTML forms from my Java Application?

Hi -
I am writing a little Java GUI program that will allow a user to fill out data from the GUI and then submit that data. When they submit the data (two text fields) I want to take the two text fields and submit them via the POST form method of a HTML document over the web.
Here is what I got so far:
host = new URL("http", "<my_address>", web port, "/query.html");
            InputStream in = host.openStream();
            BufferedInputStream bufIn = new BufferedInputStream(in);
            for (;;)
                int data = bufIn.read();
                // Check for end of file
                if (data == -1)
                    break;
                else
                    System.out.print ( (char) data);
            }What that code does is makes a URL, opens a stream, and reads the HTML source of the file at the specified URL. There is a form that submits data via the POST method, and I would like to know how to write data to specific forms and specific input types of that form.
Then, I'd like to be able to read the response I get after submitting the form.
Is this possible?
Thanks,

Here is how one of my e-books go about Posting
I tryied in one of my projects and it works ok
(Tricks of the Java Programming Gurus)
There's another reason you may want to manipulate a URLConnection object directly: You may want to post data to a URL, rather than just fetching a document. Web browsers do this with data from online forms, and your applets might use the same mechanism to return data to the server after giving the user a chance to supply information.
As of this writing, posting is only supported to HTTP URLs. This interface will likely be enhanced in the future-the HTTP protocol supports two ways of sending data to a URL ("post" and "put"), while FTP, for example, supports only one. Currently, the Java library sidesteps the issue, supporting just one method ("post"). Eventually, some mechanism will be needed to enable applets to exert more control over how URLConnection objects are used for output.
To prepare a URL for output, you first create the URL object just as you would if you were retrieving a document. Then, after gaining access to the URLConnection object, you indicate that you intend to use the connection for output using the setDoOutput method:
URL gather = new URL("http://www.foo.com/cgi-bin/gather.cgi");
URLConnection c = gather.openConnection();
c.setDoOutput(true); Once you finish the preparation, you can get the output stream for the connection, write your data to it, and you're done:
DataOutputStream out = new DataOutputStream(c.getOutputStream());
out.writeBytes("name=Bloggs%2C+Joe+David&favoritecolor=blue");
out.close();
//MY COMMENT
//This part can be improved using the URLEncoder
//******************************************************You might be wondering why the data in the example looks so ugly. That's a good question, and the answer has to do with the limitation mentioned previously: Using URL objects for output is only supported for the HTTP protocol. To be more accurate, version 1.0 of the Java library really only supports output-mode URL objects for posting forms data using HTTP.
For mostly historical reasons, HTTP forms data is returned to the server in an encoded format, where spaces are changed to plus signs (+), line delimiters to ampersands (&), and various other "special" characters are changed to three-letter escape sequences. The original data for the previous example, before encoding, was the following:
name=Bloggs, Joe David
favoritecolor=blue If you know enough about HTTP that you are curious about the details of what actually gets sent to the HTTP server, here's a transcript of what might be sent to www.foo.com if the example code listed previously were compiled into an application and executed:
POST /cgi-bin/gather.cgi HTTP/1.0
User-Agent: Java1.0
Referer: http://www.foo.com/cgi-bin/gather.cgi
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Content-type: application/x-www-form-urlencoded
Content-length: 43name=Bloggs%2C+Joe+David&favoritecolor=blue
Java takes care of building and sending all those protocol headers for you, including the Content-length header, which it calculates automatically. The reason you currently can send only forms data is that the Java library assumes that's all you will want to send. When you use an HTTP URL object for output, the Java library always labels the data you send as encoded form data.
Once you send the forms data, how do you read the resulting output from the server? The URLConnection class is designed so that you can use an instance for both output and input. It defaults to input-only, and if you turn on output mode without explicitly setting input mode as well, input mode is turned off. If you do both explicitly, however, you can both read and write using a URLConnection:
c.setDoOutput(true);
c.setDoInput(true); The only unfortunate thing is that, although URLConnection was designed to make such things possible, version 1.0 of the Java library doesn't support them properly. As of this writing, a bug in the library prevents you from using a single HTTP URLConnection for both input and output.
//MY COMMENTS
When you doing URL encoding
you should not encode it as one string becouse then it will encode the '=' signes and '&' signes also
you should encode all the field names and values seperatly and then join them using '&'s and '='s
Ex:-
public static void addField(StringBuffer sb,String name, String value){
   if (sb.length()>0){
      sb.append("&");
   sb.append(URLEncoder.encode(name,"UTF-8"));
   sb.append("=");
   sb.append(URLEncoder.encode(value,"UTF-8"));
}

How to fill out form using adobe?

I downloaded adobe to fil out the form but i cant still open it.

You either need to purchase Adobe Acrobat Pro, or go to a place such as http://www.pdfescape.com/ to fill out the form. There is an edit functionality in Preview application, but that doesn't always fill out all types of forms.

How to find out users who have answered security questions

Is there any report where we can find out users who have answered security questions.
Please reply back to this.

This might help you:
Define a task template, reference the UserQuestionReport task definition:
<TaskDefinitionRef>
    <ObjectRef type='TaskDefinition' id='#ID#TaskDefinition:UserQuestionReport' name='User Question Report' displayName='UI_REPTS_XML_USER_QUESTION_TITLE'/>
</TaskDefinitionRef>Define desired variables
      <Attribute name='attrListField'>
        <List>
          <String>accountId</String>
          <String>policy</String>
          <String>loginInterface</String>
          <String>questions</String>
        </List>
      </Attribute>
      <Attribute name='attrMapField'>
        <Map>
          <MapEntry key='accountId' value='UI_REPTS_XML_REPORT_ATTR_ACCOUNTID'/>
          <MapEntry key='loginInterface' value='UI_ATTR_LOGIN_INTERFACE'/>
          <MapEntry key='policy' value='UI_SERVICEMODIFY_JSP_ACCOUNTPOLICY'/>
          <MapEntry key='questions' value='UI_ATTR_MIN_QUESTION_UNANSWERED'/>
        </Map>
      </Attribute>and the rest of the task template for a report definition.
Hth
Edited by: nickoarg on Feb 5, 2009 1:57 PM

How to fill out metadata presets on import panel?

I am an amateur photographer and see no need for copyrighting any photos at the moment(legally) as i do not submit any photos for publishing etc. Do i need to fill out the copyright section.. And what other sections do i need to fill out under basic info etc.? Thanks!!

If the form was properly made, including all the necessary permisions, then it can be copied, saved and printed as every other unprotected file.

How can I transfer music I have downloaded myself from my iPad to my iTunes library on my laptop. I cannot access my library and had to start anew one which does not contain non purchased music

I was locked out of my user account on my laptop due to a registry problem. I had another administrator account on the laptop so I am using that now. I could get to the files in the old account and copied them over...... All except the iTunes library. I have a new iTunes library in the new user account but it only contains my purchases, none of the music I downloaded from my own CD,s. Also all my playlists have disappeared. Fortunately, I still have all my library on my iPad and old iPod, but I can't find out how to transfer the music from them to the laptop. I can't back them up onto my laptop either, otherwise everything would be erased from them. I don't know what else has not been transferred over. I think all my apps are there, but none of the audiobooks.

If the music is purchased through iTunes:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
If the music is not purchased through iTunes:
Senuti — Recover music from your iPod, iPhone or iPad to your Mac

How to find out which formulas have been used in sales orders of a period

Hi Experts,
I am trying to find out how much my users actually use the formula and average pricing. Therefore, I am trying to build a quick viewer by relating tables. In order to use the F&A pricing, they use one particular condition type ZFA1. By linking tables vbak and KONV via KNUMV, I can see in which orders they have used ZFA1, but I also want to find out which Formula they have chosen from the repository. As this is visible for the user from the sales order, there should be a table that stores it, but I cannot find it. Does someone know the table and can help me on this topic?
If you provide the solution, I will definitely give you the reward points. Thank you in advance!
Greetings
Petra

Hi Petra,
Please try to check the table OICQ7 with KNUMV from VBAK.
KR,
Sergey

How to fill out a form such as a IRS form

For an example, lets say you take the 1040 form from the IRS, the user enters input for the form in the console or gui and the input is placed in the correct places on the IRS form. You can't make your own form, it has to be the official IRS form. So for example, when the user inputs first name and last name and social security #, it would be placed in the correct spots on the actual form and then if you print out the form or view it, you will see the input. I have never done this before, How can this be done? Thanks alot for your help

Theoretically it is a simple matter. Practically a hair raising experience. However, the point of the matter is that while printing your formating must be perfectly aligned. That apart, you must also be cautious of "printer specific" vaguries. java.awt and java.awt.print packages have many classes for the purpose - you can also go for third party printing packages.
Ironluca

How to fill out an applicationi have downloaded

Similar Messages

Maybe you are looking for