How to fill selection screen in background job

Hi experts,
I use FM BP_JOB_CREATE to create background job. This job is program with one parameter on selection screen - production order number.
This job is created when production order is saved.
How can I fill production order number on selection screen? Do I need to create variant for every production order number?
Thanks&regards,
Jirka

To create variants you can use !
RS_CREATE_VARIANT
You can also use
JOB_OPEN
JOB_SUBMIT
JOB_CLOSE.
to create a job.
Regards,
Lalit Mohan Gupta.

Similar Messages

  • How to find process chain using background job in sm37

    How to find process chain using background job in sm37

    Better is to select the job.
    Select (Define) Step (s) or F6.
    Select the line and Menu Goto>Variant.
    The variant contains the name of the CHAIN and its VARIANT.
    Success
    We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
    We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
    We could not find the scheduled job via SM37.
    Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
    We delete these entries via function BP_JOB_DELETE....
    Edited by: Jack Otten on Jul 9, 2010 2:50 PM

  • Selection screen in background MRP

    Hi all,
    Can anyone please tell me what is the meaning of 'selection screen', in background MRP variant? What does it contains and what is its significance?
    Thanks in advance
    Sumeet

    Hi,
    In a variant there are several fields in the selection screen, the variant is saved with a set of these field values.
    In the case of MDBT, you can create several varinats for different materials or Plants and then execute those varinats whenver you need.
    Basically the varinat caoncept is associated with Back ground jobs and also user specific entries.
    Suppose every time you do not want to repeatedly enter the same field values , you can use these varinats.
    Reward if you like it.

  • HOW TO USE SELECTION SCREEN

    HOW TO USE SELECTION SCREEN
    I WANT TO INSERT PURCHASE DOCUMENT NUMBER
    AND WANT TO SEE ALL INFORMATION FOR THAT PURCHASE DOCUMNET NUMBER.
    THANKS IN ADVANCED.

    The main use of the selection-screen is to select screen in the back ground
    ex :    
    TABNAME
    IN THE ABOVE FIGURE  TABNAME IS THE FIELD AND THE BACK END IS   CREATED SCREEN IN THE BACK END
    THIS SCREEN CREATION WE CAN USED THE SCREEN SELECTION

  • How to pass selection screen parameters in text elements?

    how to pass selection screen parameters in text elements?

    don't you mean he other way around. Assign text-elements (selection texts) to select options?
    This you do in the menu where you can find text-elements, selection texts.
    menu Goto->text elements->selection texts.
    Edited by: Micky Oestreich on May 10, 2008 2:45 PM

  • WAD template with BSP Application - how to read selection screen values

    Hello,
    I've created Web template with Web Application Designer (WAD).
    I would like to extend  that page with BSP Application...
    Purpuse of this application is to read some information from tables
    on BW transaction server and display them within Web page.
    Question: How to read selection screen values from a Web template ?
    Thanks for any help,
    Pawel Borowiec

    Hi,
    The selection screen parameters will be on an inputField, so try and get the is of the inputfield generated by doing View source...
    And once you get the inputfield Id, you can read the value in the InputField(InF) by
    using the following code...!
    data : if_value type ref to cl_htmlb_inputfield.
    data : variable type string.
    if_value ?= cl_htmlb_manager=>get_data( request = request
                                                name    = 'inputField'
                                                id      = 'InF_ID_here'
           if if_value->value is not initial.
             variable  = if_value->value.
           endif.
    Hope this helps.
    <b><i>Do reward each useful answer..!</i></b>
    Thanks,
    Tatvagna.

  • How to cal selection screen in module pool

    Hi abapers,
    I have to use selection screen in module pool programme..How to call selection screen in module pool.
    Regards,
    ramya

    YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
    SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
      SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                          NO INTERVALS.
        SELECT-OPTIONS SEL1 FOR SY-SUBRC.
        PARAMETERS     PAR1 LIKE SPFLI-CARRID.
        SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
      SELECTION-SCREEN END OF BLOCK BL1.
    SELECTION-SCREEN END OF SCREEN 123.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN BEGIN OF SCREEN 99.
      SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                       USER-COMMAND US01.
      SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
      PARAMETERS     PAR2 TYPE I.
    SELECTION-SCREEN END OF SCREEN 99.
    THEN YOU HAVE TO CALL THAT
    CALL SELECTION-SCREEN scr.
    AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
    CALL SCREEN..
    REGARDS
    SHIBA DUTTA

  • How to capture selection-screen values

    Hi,
      How to capture selection-screen values when user pressing F3 or Back button after the display of report.
    Regards,
    Bujji.

    Hi Bujji,
    select-option are actually ranges or more general internal tables with the structure:
    SIGN:    'I'nclusive or 'E'xclusive
    OPTION:  'EQ', 'BT', 'NE', 'GE', 'CP', ....
    LOW:     low value of type of the curresponding "FOR table-field"
    HIGH:     high value of type of the curresponding "FOR table-field"
    You may just code:
    TABLES: mara.
    SELECT-OPTIONS s_matnr FOR mara-matnr.
    LOOP AT s_matnr.
      WRITE: / s_matnr-sign,
               s_matnr-option,
               s_matnr-low,
               s_matnr-high.
    ENDLOOP.
    If you find my answer useful, please don't forget the reward.
    Regards,
    Juergen

  • How to avoid selection-screen?

    Hi,
    i have this short report:
    TABLES: MARA.
    SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
    AT SELECTION-SCREEN.
      IF SY-BATCH = 'X'.
    * how to avoid selection screen
      ENDIF.
    START-OF-SELECTION.
      SELECT * FROM MARA WHERE MATNR IN S_MATNR.
        WRITE: / MARA-MATNR.
      ENDSELECT.
    END-OF-SELECTION.
    in batch i don't want the selection-screen. Is it possible? How can i do this?
    Thanks.
    regards, Dieter

    Dieter Gröhn wrote:
    > Hi,
    >
    > i have this short report:
    >
    >
    > TABLES: MARA.
    > SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
    > *
    > AT SELECTION-SCREEN.
    >   IF SY-BATCH = 'X'.
    > * how to avoid selection screen
    >   ENDIF.
    > *
    > ************************************************************************
    > START-OF-SELECTION.
    > *
    >   SELECT * FROM MARA WHERE MATNR IN S_MATNR.
    >     WRITE: / MARA-MATNR.
    >   ENDSELECT.
    > *
    > END-OF-SELECTION.
    >
    >
    > in batch i don't want the selection-screen. Is it possible? How can i do this?
    >
    > Thanks.
    >
    > regards, Dieter
    Please check the value of the variable sy-binpt, I believe the value of the variable sy-binpt will be set to 'X'  if the program is called from a bath input, hope this helps.

  • How to get selection screen variant name of a report ?

    Hi Experts,
    Can any body please suggest, how I can get the variant name that was selected when a report program was being scheduled in background?
    I am using system field SY-SLSET but it is working only at foregrounf execution.In background mode it holds different value like '&0000000000038'.
    Thanks in advance.

    Hi !
    When running the program in foreground (SE38 -> F8) or in a background job (SM36), sy-slrel is correctly filled.
    When running in background via SE38 transaction (run in background  : F9), sy-slrel is not filled correctly (&000010 for example).
    However, in the second case, you still are in foreground when in the selection screen. Thus this simple but quite efficient idea of  [Vinod Vemuru|http://wiki.sdn.sap.com/wiki/display/~ncz6anw] :
    http://wiki.sdn.sap.com/wiki/display/ABAP/Howtogetthevariantnamewhenrunningthereportinbackgroundfromselectionscreen

  • How to submit the report in Background job.

    Hello Friends,
    In the selection screen I have 2 radio buttons one for background Process & other for foreground processing. if the user selects the background processing the program should execute in background and output need to be sent to SAP Inbox.
    Issues:
    1) If I am using the JOB_Submit FM or Report Submit the program is going to infinite loop and many continiously jobs are are being scheduled. How to avoid.
    2) Is there any best possible way to send the mail to SAP Inbox.
    Note: I am using OOALV in my program....
    Thanks,
    Ravi

    Hi,
    the first problem looks like you have an infinite recursion. You just need to avoid background scheduling again. There is a system field sy-batch. So if this field is equal to 'X' then you are already in background mode and you don't need to schedule your background job again. Another way is to split your program in two programs. The first will be responsible for scheduling or executing the second one.
    You can use FM SO_NEW_DOCUMENT_SEND_API1 to send message to workflow inbox. You need to user receiver type B. There are so many posts on this forum about sending emails from ABAP which may help you with implementing this requirement.
    Cheers

  • How to Execute RMDATIND inside another Background Job using a variant?

    Hi,
    It is only possible to start RMDATIND (direct input) in background from transaction BMV0 u2013 it is impossible just to place the program in another job in SM37 or SM36.
    In a related thead I saw : u201DSolved my self by using BI_START_JOB. If I use this function module along with RS_CREATE_VARIANT and RS_VARIANT_DELETE. u201C
    Following is the link to that thread
    Re: Problem in using JOB_OPEN, JOB_SUBMIT & JOB_CLOSE
    RS_CREATE_VARIANT (Creating a variant (not using a selection screen))
    RS_VARIANT_DELETE(Variant to be deleted)
    BI_START_JOB
    Can some one provide me with all the parameters required to execute the above Function Modules?

    Hi,
    Refer below thread:
    Process Control in Confirmation Parameters
    All the relevant details are explained in detail..
    Best Regards,
    Siva

  • How to Upload a file in background job

    Hi,
    I am facing a problem is i have to upload a  file but i have to run that program in background, by using gui upload or ws upload will not run in background canany one pls tell me how to do that .

    There is no other easy solution.
    Some complicate options are to:
    1] In the selection screen take the file name which is the presentation server...write code to copy this file to the appserver and the submit the program to run in background and read using open dataset.
    2] There are also some complicated ways of accessing the presentation server in background by creating rfc destinations for the PC a accessing it thru function modules, but these are not recommended.

  • To fill selection screen parameter with user's parameter id

    Hi,
    I need to display PLANT on the selection screen of a report as SELECT-OPTIONS.
    When launching the transaction for the report, the program must fill the PLANT by default with the user's own parameter id (WRK) .
    How can it be done?
    Regards
    Nishant

    HI nishant,
    in INITIALIZATION EVENT.
    1. first get the parameter id value
       in some variable of type plant.
       (eg p1)
    2. then (suppose the select option name is myplant)
      MYPLANT-SIGN = 'I'.
      MYPLANT-OPTION = 'EQ'.
      MYPLANT-LOW =  p1 . "<---- from above variable in point 1
    APPEND MYPLANT.
    regards,
    amit m.

  • Dynamic Variant -Current date  in selection screen - for batch jobs

    Hi Experts,
    My report runs in batch job with a variant, daily.
    One of the filed in selction screen should hv CURRENT DATE, with out providing as input explicitly by user.
    So, How Can I get it done?
    Its some thing with Dynamic variants + Selection Variables +  date selection, but, I forgot the navigation etc.
    pl. let me know
    thanq

    thanq.
    and pls. let me further clarify that,
    programitically am populating the date as current date minus 1 in the field of my_date in the selection screen.
    now, they wanna to run the report in back ground, daily.
    now, I followed ur tip/link and saved with_date_variant, fine.
    so, pls. let me know that,
    1) if the report runs in back ground tomorrow with with_date_variant(which is i created by seeing ur link), Is the selection screen my_date(prog. populates as June 5th) will be override with current date(i.e. June 6th)?
    In broad, Is the selection criteria wuld be over writes with the Dynamic varints?
    thanq

Maybe you are looking for