How to fill setup table of 2LIS_11_VASTI ?

Hi,
How do you fill the setup table for extractor 2LIS_11_VASTI?
I don't find it in SBIW. I have filled the sales and delivery setup tables, but this did not help.
2LIS_11_VAST contains mostly VBUP fields. This table contains status items for sales orders and deliveries.
Where else should I look?
Thanks for any help,
Jay

Hi Jay,
Make sure the extract structure is active. You can check the same from LBWE > 11: SD Sales BW> MC11VA0STI is active.
If the extract structure is active. Inorder to fill the setup table. First delete the setup table for the application area 11 from SBIW transaction. Then fill the set-up table for the application area 11 as you did for deliveries.
Then check whether data source is pulling data.
Let me know if there is an issue even after following the above steps.
Thanks & Regards,
Namrata

Similar Messages

How to Fill Setup tables for MAP (IS- Retail)

Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
Naresh

Hi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh

How to fill setup table for Application 18 Customer services

Hi,
How can I fill setup table for application 18.
Regards,
ST

Hi,
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
Also pls chk this;
Re: query on setup table filling
Regards
CSM Reddy

How to fill setup table based on date???

Hi Experts,
I need to do repair full request for 2lis_11_vaitm datasource, I want to load from 1st Apr 2008 to 31st March 2009, but in OLI7BW t-code i am unable to find date field in selection screen.
1) How can I fill setup table based on date?
2) In RSA7 containing records even though is it possible to fill setup table ?
Helpful answer will be appreciated with points,
Thanks in advance,
Venakt.

Venkata,
1) How can I fill setup table based on date?
--> If date not possible then try to setup with available options/characteristics.
--> While pulling into BW, extract data selectively. Give date selection at infopcakge.
2) In RSA7 containing records even though is it possible to fill setup table ?
--> Yes, you can do it.
Srini

How to fill setup table for the Extractor: 2LIS_02_CGR

Hi,
Tthere is no data for the 2LIS_02_CGR extractor in RSA3 T-Code, I would like to load the data and as per my understanding i need to fill the step table.
Could any one provide me the step-by-step to fill the setup table.
Regards,
Prem
Edited by: pannalde on Dec 2, 2010 6:03 AM

Hi Prem:
For more details please refer to the blog by Paulo Junior.
"The SET UP!"
/people/paulo.junior/blog/2010/11/25/the-set-up
Regards,
Francisco Milán.

How to fill setup table and initialization

Hi,
Can any body send me the document for filling the setup tables and initialization ?
My mail id is [email protected]
Regards,
Viren.

Hi
Please sent that doc. to me also.
[email protected]
Regards
Swetha

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

Strange error while filling setup tables for purchasing

hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.

hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you.

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

Timeout error while filling setup tables

HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.

thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM

Can we select desire fields while filling setup tables?

Hi
When we fill setup tables we have some fields over there on which we can put some conditions & we can fill setup tables for that particular conditions..
Now take example of datasource 2LIS_04_P_COMP..
To fill setup tables I went in tcode OLI4COMP... I want to fill setup tables for some particular date range...
I have only 5 fields in OLI4COMP.. I dont have field Posting date BUDAT there...
I want to refill setup tables by usiing selections range on BUDAT but its not available in OLI4COMP..
How to achieve this?? Please Help..
Regards
Swati

Hello Swati,
You can not do the fill with the date range if there is no entry.
The alternative approach is that you can collect the document which belongs to your date range and then give that selection at the Document selections.
For this you need to check the documents from the base tables of your application.
This will solve your issue. I hope you might have deleted the earlier Setup tables before doing this activity.
Hope this helps.
Thanks

Filling Setup Table

Hi all,
I have activated 2lis_01_s001 datasource in R/3.
Now I want to fill setup table for this.
So, How can i fill setup table for 2lis_01_s001?
Thanks in Advance,
Warm Regards,
Rishit

Hi Rishit,
goto -> SBIW -> follow the path -> give ur information structure name and run statistical setup,it brings data into ur structure then run init or full in BW.
after running init activate ur delta in LBW0.
if u run INIT or FULL then data comes from Information structure
if u run delta data comes from transparent tables.
also check the links:
Extraction from datasource 2LIS_01_S001
2LIS_01_S001
2LIS_01_S001 - Pl. help - I can not Setup LIS Environment for S001
Where is tables "SnnnBIW1 & SnnnBIW2"
2LIS_01_S001 Problem
2lis_01_s001
Hope it helps
Regards,
Tanish

Trying to fill Setup table but could'nt able to do?

Hello all
Iam trying in Sandbox,to fillup the setup tables for Sales Application "11",but its saying like "<b>No extraction structure active or no BW connected</b>",for this I deleted the setup tables from "LBWG" and tried to delete the Init load from Infopackage,but no Init load is available there? and then Iam trying to fillup the setup table but the same error is repeating.
How to fillup setup tables now?
Many thanks

Error message when filling the setup tables   Help
    SAP Note Number      Note Language    DEEN    Display Versions    12
Print      SSCR      Download
Text Header Data Release Correction Instructions Support Packages >>
Symptom
When you call the transactions for filling the setup tables to initialize the logistics data for the Business Information Warehouse, the system terminates with error message M2630:"No extraction structure active", although the update is active for at least one extract structure.
Additional key words
LBWE OLI4BW OLI9BW OLI7BW
Cause and prerequisites
The problem may be caused by the fact that there is no BW system connected to the OLTP system.
Solution
Change the text in error message M2630 to:
"No extract structure active or no BW system connected"
Source code corrections

Delete and Fill Setup table

Hi Experts,
Can anyone tell me the steps to delete and fill setup tabel??
Thanks
dave

Hi Dave
How are you ?
See the answers below.
Delete setup tables
Tcode LBWG-> ENter application number (ex. Purchasing-02)-> Execute
Fill setup tables
Tocde OLI*BW Path is ->tcode SBIW->Business Information Warehouse->Settings for Application-Specific DataSources->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Perform Setup - SD Sales Orders
Ex. OLI7BW for setup for SD sales orders.In this screen mention the values for document data restrictions such as Sales organization, company code etc, Enter name of run and provide date of termination & time -> future date and time. The setup job will contunue running till this date& time and then will terminate.
Excute the job in background
Hope it helps
Regards
Pradip

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

How to fill setup table of 2LIS_11_VASTI ?

Similar Messages

Maybe you are looking for