How to Fill Setup tables for MAP (IS- Retail)

Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
Naresh

Hi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL      ---   MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208   these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh

Similar Messages

  • How to fill setup table for Application 18 Customer services

    Hi,
    How can I fill setup table for application 18.
    Regards,
    ST

    Hi,
    To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
    SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
    Also pls chk this;
    Re: query on setup table filling
    Regards
    CSM Reddy

  • How to fill setup table for the Extractor: 2LIS_02_CGR

    Hi,
    Tthere is no data for the 2LIS_02_CGR extractor in RSA3 T-Code, I would like to load the data and as per my understanding i need to fill the step table.
    Could any one provide me the step-by-step to fill the setup table.
    Regards,
    Prem
    Edited by: pannalde on Dec 2, 2010 6:03 AM

    Hi Prem:
        For more details please refer to the blog by Paulo Junior.
    "The SET UP!"
    /people/paulo.junior/blog/2010/11/25/the-set-up
    Regards,
    Francisco Milán.

  • Error while filling setup tables for 2lis_13_vahdr

    Dear friends,
    I am getting below Error while filling setup tables for 2lis_13_vahdr.
    More faulty documents found than the tolerated 0000000000
    Message no. M2222
    Can any one guide me how to address this issue.
    Thanks and Regards
    Nithya

    Hello Nithya,
    It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
    While executing OLI*BW including a value in the maintain  "No. tolerated faulty documents" - 5000 or 10000.
    Then execute the program in background.
    Once the job is completed check the background job log if any errors.
    Thanks
    Chandran

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • Trying to fill setup table for 2LIS_04_P_ARBPL

    Hi
    I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
    Am I missing a step?
    Thanks
    Pooja

    I went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
    Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
    I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
    Then I got the message - datasource still contains data to be transferred.
    Thanks!

  • Tcode to fill setup tables for application 0CS( Customer Service)

    Dear Experts,
    i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
    the datasource comes under the appilcation 0CS( Customer Service).
    when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
    Could you please let me know the transaction to fulfill the same.
    Regards,
    Sunil...

    Hi SunilKumar Bolle,
    For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
    The only way to say thanks in SDN is to assign Points.

  • Filling setup tables for 2lis_03_um

    hi
    i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
    its asking Archiving Run  . i am trying to give or f4 its not allowing me?
    please let me know

    Hi Suneel........
    Check this thread by Roberto Negro......
    Archive run.
    Hope this helps.....
    Regards,
    Debjani.....

  • How to stop document posting when filling setup tables for logistic app.

    Hello Boys
    I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP,  are running?
    So I have some questions
    1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
    3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
    4) Every logistic applications has a different procedure??
    thanks (with points of course) for any help
    rgds
    A. Garduñ

    Hi Azael:
    Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
    2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
    3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
    hope it helps.
    assign points if helpful
    kalyan

  • Strange error while filling setup tables for purchasing

    hi experts,
    while filling setup tables, job is getting cancelled. when I check in sm37 message is
    Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
    Job cancelled after system exception ERROR_MESSAGE
    It is for only the 8th month of 2009. If I run for other dates it is succesfull.
    I am not able to understand what it mean. 
    Pls guide me how to resolve this.
    regards,
    rajesh.

    hi
    according to sven check this link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
    EUR Conversion to USD
    may help you.

  • How to fill setup table of 2LIS_11_VASTI ?

    Hi,
    How do you fill the setup table for extractor 2LIS_11_VASTI?
    I don't find it in SBIW.  I have filled the sales and delivery setup tables, but this did not help.
    2LIS_11_VAST contains mostly VBUP fields. This table contains status items for sales orders and deliveries.
    Where else should I look?
    Thanks for any help,
    Jay

    Hi Jay,
    Make sure the extract structure is active. You can check the same from LBWE > 11: SD Sales BW> MC11VA0STI is active.
    If the extract structure is active. Inorder to fill the setup table. First delete the setup table for the application area 11 from SBIW transaction. Then fill the set-up table for the application area 11 as you did for deliveries.
    Then check whether data source is pulling data.
    Let me know if there is an issue even after following the above steps.
    Thanks & Regards,
    Namrata

  • How to fill setup table based on date???

    Hi Experts,
    I need to do repair full request for 2lis_11_vaitm datasource, I want to load from 1st Apr 2008 to 31st March 2009, but in OLI7BW t-code i am unable to find date field in selection screen.
    1) How can I fill setup table based on date?
    2) In RSA7 containing records even though  is it possible to fill setup table ?
    Helpful answer will be appreciated with points,
    Thanks in advance,
    Venakt.

    Venkata,
    1) How can I fill setup table based on date?
    --> If date not possible then try to setup with available options/characteristics.
    --> While pulling into BW, extract data selectively. Give date selection at infopcakge.
    2) In RSA7 containing records even though is it possible to fill setup table ?
    --> Yes, you can do it.
    Srini

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • Error while filling setup table for Quality Mangement D/Sources

    HI Experts,
    Iam trying to fill the QM setup tables.
    Steps iam following are
    1.T-code OLIQBW
    2.Selecting Event QV, QE and gave selection parameters and name for Run.
    3. Execute
    4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
       Exception  CX_SY_DYN_CALL_PARAM_NOT_FOUND
       Date and Time          27.08.2009 11:21:01                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.

    Hi Mansi,
    Runtime Errors         CALL_FUNCTION_PARM_UNKNOWN                                                 
    Exceptn                CX_SY_DYN_CALL_PARAM_NOT_FOUND                                             
    Date and Time          27.08.2009 11:56:20                                                                               
    ShrtText                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLQMER" had to be terminated because one of the                  
         statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                                     
         with the parameter "I_ADDITIONAL_DATA".                                                      
         This parameter is not defined.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                     
         . The exception, which is assigned to the class                                              
          'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither                                               
         caught nor passed along using a RAISING clause, in the procedure                             
          "QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"                                                   
    Since the caller of the procedure could not have expected this exception                     
          to occur, the running program was terminated.                                               
         The reason for the exception is:                                                             
         The reason for the exception is:                                                       
         Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                               
         with the parameter "I_ADDITIONAL_DATA".                                                
         This parameter is not defined.                                                                               
    Missing RAISING Clause in Interface                                                        
         Program                                 SAPLQMER                                       
         Include                                 LQMER$01                                       
         Row                                     5                                              
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS                                                                               
    Trigger Location of Exception                                                              
         Program                                 SAPLQMER                                       
         Include                                 LQMERU01                                       
         Row                                     488                                            
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS

  • Short dump error while filling setup tables for 2LIS_06_INV

    Hi All,
    I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
    Error
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    plz can anyone help me out...

    Dear friends,
    I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
    error:in detail.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    Information on where terminated
        Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
        The main program was "RMCENEUR ".
        In the source code you have the termination point in line 827
        of the (Include) program "LMRMBWF01".
        The program "SAPLMRMBW" was started as a background job.
        Job Name....... "RMCENEUR"
        Job Number..... 10524100
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
         declared
        in the RAISING clause of its signature.
        The procedure is in program "SAPLMRMBW "; its source code begins in line
        806 of the (Include program "LMRMBWF01 ".
      806 FORM bw_retrieve_db_co  USING    t_mcrbkey_bv    TYPE mcrbkey_t
      807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
      808                                  t_ekbe_acc      TYPE t_ekbe
      809                         CHANGING t_mcrbco        TYPE mcrbco_t.
      810
      811   TYPES: BEGIN OF s_target.
      812   TYPES: table_left LIKE rbco.
      813   TYPES: table_right TYPE rbex.
      814   TYPES: END OF s_target.
      815   TYPES: t_target TYPE TABLE OF s_target.
      816
      817
      818   DATA: t_rbco_nbv  TYPE t_target,
      819         t_rbco_bv   TYPE t_target,
      820         s_rbco      TYPE s_target,
      821         s_ekbe      LIKE ekbe,
      822         s_mcrbco    TYPE mcrbco,
      823         l_index     LIKE sy-tabix.
      824
       825 * Data source: invoice item non-background
      826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
    *>>>>>     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i*
      828        ON   ( rmandt = imandt AND
      829               rbelnr = ibelnr AND
      830               rbuzei = ibuzei AND
      831               rcobl_nr = icobl_nr )
      832        INTO TABLE t_rbco_nbv
      833        FOR ALL ENTRIES IN t_mcrbkey_nbv
      834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
      835              r~belnr = t_mcrbkey_nbv-belnr.
      836   ENDIF.
      837 * Data source: invoice item background
      838   IF NOT t_mcrbkey_bv[] IS INITIAL.
      839     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i
      840        ON   ( rmandt = imandt AND
      841               rbelnr = ibelnr AND
      842               rbuzei = ibuzei AND
      843               rcobl_nr = icobl_nr )
      844        INTO  TABLE t_rbco_bv
      845        FOR ALL ENTRIES IN t_mcrbkey_bv
      846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
    Thnks in advance

Maybe you are looking for