How to fill text with the negative of the background image

I have a picture of grass as the background. I am trying to put text on the image, and have the fill of text be colored as the negative of the background grass image colors. To represent what I wish to do, I demonstrated the color I wish to obtain inside the fill by highlighting the text over the image. Any help is appreciated. Thanks.

Pinipples,
As I (mis)understand it, you may:
1) Copy/replace the image on top of itself;
2) Invert the colours of the copy image;
3) Place the text (which may be live Type) on top of the copy image, select both (not the original image), and Object>Clipping Mask>Make.

Similar Messages

How do I text with the iPad 2 using cellular device?

How do I text with the iPad 2 using cellular device? I also have iPhone 4, can I use them both for texting?

The iPad doesn't have any text over cellular capabilities. You can use apps like Text Free to send texts to non-iOS devices, though.

When i text with my new 4s the person receiving my text receives it from my email address, when i text with my new 4s the person receiving my text receives it from my email address

when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?

when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?

How to fill tabs with textures?

Hi all,
I wondering how to fill tabs with textures, just like in the "Personal Budget" template.
I mean this:
How could I replicate this nice effect? Please help!
I already read the user manual but I won't be able to find a solution...

One way is to open the template and select the table with the fill pattern. Open the table inspector
highlight the Image fill cell (in the "Cell Background" section). Copy.
Now open the application Preview in the Applications folder. Select the menu item "File > New From Clipboard" to create a new document with the image you copied. Now save the image as a pdf using the menu item "File > Save..."
Save it with a name you can remember in a location of your choice.
Now select a table in some other Numbers document and set the table background to the image you just saved by using the Table Inspctor:

How to highlight text with Adobe Reader XI?

email [email protected]

Thanks. The PDF file was made from a web site article and I guess this is the same as scanned as I cannot highlight. The cursor changes but cannot highlight what I want.
I was able to add text and I did this in Red and will ask the VA to read under the sections marked in Red.
Thanks,
Vernon Pobanz
From: ~graffiti <[email protected]>
To: vernon pobang <[email protected]>
Sent: Tuesday, October 7, 2014 11:57 AM
Subject: How to highlight text with Adobe Reader XI?
How to highlight text with Adobe Reader XI?
created by ~graffiti in Adobe Reader - View the full discussionUse the highlight tool under Comment>Annotations. This will only work if the pdf isn't a scanned image. If that is the case, there is no text to highlight. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6800192#6800192 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

HT3529 When texting with other iphone users, the text used to be in a blue bubble. Now it's green. What happened? Am I being charged for these text messages now? I'm with Verizon if that matters.

When texting with other iphone users, the text used to be in a blue bubble. Now it's green. What happened? Am I being charged for these text messages now? I'm with Verizon if that matters.

Thanks for the help, Allan Sampson.
I updated itunes, shut the phone off and on, it still didn't give me blue bubbles. Kept following the suggestions on the page ... I didn't know there was an IMessaging switch, but, shoot, it was OFF. Anyway, I toggled it on and now the text bubbles are blue again.

I can only text through ordinary message when not connected to the internet to someone, but when I am connected, it is automatically assumed as iMessage. How will I text ordinarily without turning off the net? Thank you!

I am from the Philippines btw. What I meant is, I cannot text someone ordinarily when the net is turned on, and it assumes to be texting through iMessage. How will I text someone without turning off the internet in an ordinary way, not in iMessage? Thank you.

I Tried that already, but if i turned it off, I cannot send an imessage to people I want to text through imessage. There are people in my contacts that when I text, it is automatically as text message, while there are some that when I text, it is through iMessage automatically, and I just want through text message also. And for the latter, I still need to turn off the wifi in my phone for them to be texted through iMessage, which is more hassle.

How to write strings with an underline on the TOP-OF-PAGE of ALV

How to write strings with an underline on the TOP-OF-PAGE of ALV

if u r using classes and methods it can be done
but if u r using normal fms and then u have to use HTML_TOP_OF_PAGE but the drawback for this it cannot be printed when the report is printed .

How can I text message from iPad to the galaxy note 2 phone ?

How can I text message from iPad to the galaxy note 2 phone ?

You can only iMessage iDevices.
You need 3rd party apps to text your Galaxy Note.

How can I export speech analysis text with imbedded timecodes for the creation of subtitle files?

I found a script that allows you to export all your text layers with time codes as a .srt subtitle file. However, instead of multiple text layers, I have only one: essentially the meta data from Premiere speech analysis that with the aid of a different script, is being used at a "subtitle layer". Essentially, I'm trying to use this data to create a .srt file so I can create actual subtitles, not this hybrid animation/text layer.
Here is the script I used to export the text layer to .srt:
Subtitle Exporter v01
Script by Philipp Grolle
www.display-artists.de
Instructions:
Select all the Text Layers you want to export, run the script, and save the file as .srt
Attention: The Script has not been debugged or testet. Try it on your own risk!
// get all the selected Layers
var theComp = app.project.activeItem;
var alleLayer = theComp.selectedLayers;
// count how many layers are selected
var anzahlLayer = alleLayer.length;
// Enable the line below if you want to change the order of your text (ascending / descending)
/* alleLayer.reverse(); */
 // prompt to save file
 var theFile = File.saveDialog("Save the text file.", "untitled.txt", "TEXT txt");
 // if user didn't cancel...
 if (theFile != null) {
 // open file for "w"riting,
 theFile.open("w","TEXT","????");
 // Do it for all the selected Layers
 for (x = 0; x < anzahlLayer; x++)
 // get In- and Outpoint of the current Layer and convert to timecode (00:00:00:00)
 var timecodeIn = timeToCurrentFormat(alleLayer[x].inPoint, 25);
 var timecodeOut = timeToCurrentFormat(alleLayer[x].outPoint, 25);
 // split the value of the inPoint; converting last 2 characters (frames) to milliseconds, and finally join it again with comma instead of colon
 var str_in= timecodeIn;
 var timeCodeAnfang_in=str_in.slice(0,8);
 var timeCodeEnde_in=str_in.slice(9,11);
 var millisek_in = timeCodeEnde_in*40; // 1000 milliseconds divided by 25 fps = 40
 var zusammen_in = timeCodeAnfang_in +"," + millisek_in;
 //split the value of the outPoint; converting last 2 characters (frames) to milliseconds, and finally join it again with comma instead of colon
 var str_out= timecodeOut;
 var timeCodeAnfang_out=str_out.slice(0,8);
 var timeCodeEnde_out=str_out.slice(9,11);
 var millisek_out = timeCodeEnde_out*40;
 var zusammen_out = timeCodeAnfang_out +"," + millisek_out;
 //counter for the number above the timecode (in the results)
 var zaehler = x+1;
 //writing the results to file
 theFile.write(zaehler);
 theFile.write("\r\n");
 theFile.write(zusammen_in);
 theFile.write(" --> ");
 theFile.write(zusammen_out);
 theFile.write("\r\n");
 theFile.write(alleLayer[x].property("Source Text").value);
 theFile.write("\r\n\n");
 // close the text file
 theFile.close();
 // open text file in default app
 theFile.execute();
As I am only using one text layer, it shows me only one continious subtitle in the .srt file. Does anyone have any suggestions?

I should add that I myself am not particularly familiar with scripts or scripting, I'm merely trying all possible solutions to my problem and this seems to be a good approach. Any help would be much appreciated.

How to fill matrix with the output of recordset query?

Hi all,
I want a user matrix to load data when I hit a button and the data to be filled is the output of an sql query. binding the matrix columns with table columns and then load the matrix with DBDatasource attached to that table will not do in this case as the columns in the sql query are from several different tables or views.
writing following line to do this takes several minutes to load the data:
For j = 0 To Reordset.RecordCount - 1
Matrix.AddRow()
Matrix.Columns.Item("col1").Cells.Item(i).Specific.value = Recordset.Fields.Item("cardcode").Value
Recordset.movenext()
next
Is there any other way to fill the matrix in this case, which loads the data faster?
Regards,

Hello Binita,
I've tested the CFL for DataTable-Matrixes in my test-AddOn. But there's still one problem left. Maybe you find it out (I will need this in the future too...).
The ChooseFromList must be added behind the DataTable-Bind, which is done on every MTX-Load (it's not from the sample above, so the UIDs are new ones):
            oDt = oDts.Item("dt_test")
            query = "SELECT * FROM [@T_CONVTOOLS01]"
            oDt.ExecuteQuery(query)
            oMtx.Columns.Item("0").DataBind.Bind("dt_test", "Code")
            oMtx.Columns.Item("1").DataBind.Bind("dt_test", "U_Alpha01")
            oMtx.Columns.Item("2").DataBind.Bind("dt_test", "U_Price01")
            oMtx.Columns.Item("3").DataBind.Bind("dt_test", "U_Quant01")
            oMtx.Columns.Item("4").DataBind.Bind("dt_test", "U_Date01")
            AddChooseFromLists()
            oMtx.LoadFromDataSource()
...where AddChooseFromLists() is...
Private Shared Sub AddChooseFromLists()
        Try
            Dim oCfls As SAPbouiCOM.ChooseFromListCollection
            Dim oCons As SAPbouiCOM.Conditions
            Dim oCon As SAPbouiCOM.Condition
            Dim oCfl As SAPbouiCOM.ChooseFromList
            Dim oCflCreationParams As SAPbouiCOM.ChooseFromListCreationParams
            Dim oBtn As SAPbouiCOM.Button
            Dim oMtx As SAPbouiCOM.Matrix
            Dim oCol As SAPbouiCOM.Column
            Dim oEtx As SAPbouiCOM.EditText
            oMtx = oForm.Items.Item("MTX_TEST02").Specific
            oCfls = oForm.ChooseFromLists
            oCflCreationParams = SboCon.SboUI.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
            oCflCreationParams.MultiSelection = False
            oCflCreationParams.ObjectType = SAPbouiCOM.BoLinkedObject.lf_BusinessPartner
            oCflCreationParams.UniqueID = "CFL_C1"
            oCfl = oCfls.Add(oCflCreationParams)
            '### OPTION:
            '# Shown ChooseFromList restricted by Conditions
            oCons = oCfl.GetConditions()
            oCon = oCons.Add()
            oCon.Alias = "CardType"
            oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
            oCon.CondVal = "C"
            oCfl.SetConditions(oCons)
            oCol = oMtx.Columns.Item("1")
            oCol.ChooseFromListUID = "CFL_C1"
            oCol.ChooseFromListAlias = "CardCode"
        Catch e As Exception
            Microsoft.VisualBasic.MsgBox(className & ".AddChooseFromLists()" & vbCrLf & "Exception:" & vbCrLf & e.Message.ToString)
        End Try
    End Sub
But I'm running into problems when trying to set the MTX-Cell via DataTable at the CFL-Event (see comment):
            If pVal.EventType = SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST Then
                Dim oMtx As SAPbouiCOM.Matrix
                Dim oCFLEvent As SAPbouiCOM.IChooseFromListEvent
                Dim oCFL As SAPbouiCOM.ChooseFromList
                Dim oDataTable As SAPbouiCOM.DataTable
                Dim cflID As String
                Dim oDt As SAPbouiCOM.DataTable = oForm.DataSources.DataTables.Item("dt_test")
                oCFLEvent = pVal
                cflID = oCFLEvent.ChooseFromListUID
                'Dim oForm As SAPbouiCOM.Form
                'oForm = SboConnection.SboUI.Forms.Item(FormUID)
                oCFL = oForm.ChooseFromLists.Item(cflID)
                If Not oCFLEvent.BeforeAction Then
                    oDataTable = oCFLEvent.SelectedObjects
                    If oDataTable Is Nothing Then Exit Sub
                    '############## Matrix Test #######################################################################
                    If (oCFLEvent.ItemUID = "MTX_TEST02") Then
                        oMtx = oForm.Items.Item("MTX_TEST02").Specific
                        '### CFL Results to UserForm
                        oDt.Rows.Offset = oCFLEvent.Row - 1
                        MsgBox(oDt.GetValue("U_Alpha01", oCFLEvent.Row - 1))
                        MsgBox(oDataTable.GetValue("CardCode", 0))
                        ' PROBLEM - can't get this working - don't know at the moment:
                        ' on other forms SetValue works....
                        oDt.SetValue("U_Alpha01", oCFLEvent.Row - 1, oDataTable.GetValue("CardCode", 0))
                        ' this also gives me problems...:
                        'oMtx.Columns.Item("1").Cells.Item(oCFLEvent.Row).Specific.value = oDataTable.GetValue("CardCode", 0)
                        oForm.Update()
                    End If
                End If
            End If
The CFL-Form opens and returns the choosen value(s) at the CFL-event. But writing to MTX still not works with this code...
Maybe you find the last piece. If so: please write here.
Cheers,
Roland
p.s.:
David Nussböck wrote
LOL - ROLAND WAS FASTER ))
...just one minute...

How to fill field with test data in alv grid display

hi all,
i m adding field TEXT to the structure for displaying grid.
i m modifying program like this
DATA: ALV_OUTPUT LIKE HRPDV_EXPIRED_Q OCCURS 0 WITH HEADER LINE.
TYPES : BEGIN OF FS_OUTPUT .
 TEXT(20) TYPE C.
 INCLUDE STRUCTURE HRPDV_EXPIRED_Q.
TYPES TEXT(20) TYPE C.
TYPES END OF FS_OUTPUT.
DATA: fs_output like table of alv_output.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'TEXT'.
WA_FIELDCAT-seltext_l = 'Abteilungs Struktur'.
wa_fieldcat-tabname = 'ALV_OUTPUT'.
WA_FIELDCAT-COL_POS = '13'.
APPEND WA_FIELDCAT TO P_GT_FIELDCAT.
this is what i have write for diapalying field. but my question is how to fill test data with field TEXT.I m writing like this but not executed in the aboove grid dispaly statement.
loop at alv_output.
*alv_output-text(20) = 'abcdefgh'.
*modify alv_output.
*endloop.
plz tell me how to fill test data

hI..,
Your table declaration has to be like this..
TYPES : BEGIN OF FS_OUTPUT .
INCLUDE STRUCTURE HRPDV_EXPIRED_Q.
TYPES TEXT(20) TYPE C.
TYPES END OF FS_OUTPUT.
DATA: ALV_OUTPUT LIKE standard table of fs_output initial size 0.
loop at alv_output into fs_output.
fs_output-text(20) = 'abcdefgh'.
modify alv_output index sy-tabix from fs_output transporting text.
endloop.
Now give this table alv_output to the GRID_DISPLAY function module..
you will get the required output !!
Plz do remember to close the thread when ur problem is solved !!
reward all helpful answers !!
regards,
sai ramesh

How to highlight text with a translucent color

I have to highlight text from a JTextArea, but the color is too dark... So I'd like to highlight with a translucent color. How can I do it ?
Here is my code :
JTextArea jt;
int beginSelect;
int endSelect;
Highlighter hl = jt.getHighlighter();
DefaultHighlighter.DefaultHighlightPainter hld = new DefaultHighlighter.DefaultHighlightPainter(Color.BLUE);
try {
hl.addHighlight(beginSelect, endSelect, hld);
catch (BadLocationException e) {}
Thank you.

import javax.swing.plaf.*;
        Color color = new Color(220, 200, 240, 150);
        ColorUIResource colorResource = new ColorUIResource(color);
        UIManager.put("TextArea.selectionBackground", colorResource);Default for windows is [r=49, g=106, b=197]
and for metal is [r=204, g=204, b=255].

[CS3 JS] How to associate text with an XML tag

Hello,
I have a script that allows one to create or modify an XML tag after one selects text, a text frame or an existing XML tag. It works fine for making the XML tag but it does not associate the text or text frame to the tag. To do that I have to right click on the selection and use the context menu to Tag Text or Tag Frame.
I want to make this automatic but cannot see how to script it.
Thanks for any help

I figured out the problem (which of course creates other interesting problems).
In the line:
var elementRef = rootElement.xmlElements.add (tagRef);
I forgot to add a reference to the xmlContent. It should read:
var elementRef = rootElement.xmlElements.add (tagRef, whatToTag);
However, this script is designed to create a dialog box where one can either create a tag along with attributes or edit an existing one. I'll post it when I am done, but there is one hangup. The script not only changes the name of a selected xml tag but all tags with the same name. How can I get it to change only the selected tag? Below is the boiled down script that duplicates that problem.
Thanks,
Tom
var myDoc = app.activeDocument;
var selObj = app.selection[0];
var TagIWantToChange = selObj.markupTag;
var newTagName = "PleaseWork"; //This line replaces all the coding to create a dialog box where the tag name could be edited.
TagIWantToChange.name = newTagName;

How to fill text with the negative of the background image

Similar Messages

Maybe you are looking for