How to fill the data in extraction queue (LBWQ)?
Hi,
I modified the structure of datasource 2LIS_02_SCL (change an append structure), since an error occurs when I check the datasource, I deleted the the deltaqueue in RSA7, before that, I also checked the extractorqueue, it was empty.
But when I excute OLI3BW to fill the extractor queue, it happens nothing.
How can I fill the data in extractor queue so that I can extract data from R3 to BW?
Thanks .
Regards
Whta u have done is Filling setup tables not the extractor queu......
Could you please tell whether ur load is delta load or Full load?
Khaja
Similar Messages
-
How to delete the data in update queue and delta queue for Queued delta?
Dear BWers,
How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help.
Thanks
RajHi Raj,
I think you need some ground work for the LO extraction same as others here. Please read the 3 blogs expliciltly created for LIS by Robert Negro.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
As well, the OSS 380078 would clear your doubts reagrding the the BW QUEUE mainatinance.
Please let me know if these material has been suffecient enough.
regarda,
raj -
How to fill the data of two different tables into one?
Hi Experts,
I have two tables named CDHDR and CDSHW(structure). I have extracted the data from these two tables through two function modules named CHANGEDDOCUMENT_HEADER and CHANGEDOCUMENT_POSITION. Now I have the data in to different tables.
These two tables neither has relationship with each other through any field nor have any field which exist in both. Can anyone tell me in this case what should be the process to take the data of both the tables into one table. How can I match the record of one table to another?
thanks a ton in advance.
Edited by: Moni Bindal on Apr 28, 2008 4:16 PM
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:42 PMHye Bindal,
without a relation, it is not possible to club the data of 2 internal tables. More over it depends on the requirement as to y u should club to non related quantities in an internal table.
if you wish to do so, one thing is it has internal table which includes the strucute of the 2.
data: begin of ty_out,
first type first_structure,
second type second_structure,
end of ty_out.
data: itab type standard table of ty_out.
data: wa type ty_out.
loop into it1 into wa1.
move corresponding wa to wa1.
append wa to itab.
endloop.
loop into it2 into wa2.
move corresponding wa to wa2.
append wa to itab.
endloop.
now the internal table itab will have all the contents of it1 and it2.
<REMOVED BY MODERATOR>
Thanks,
Imran.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:43 PM -
How to fill the data in JTable at runtime
Hi all,
I am having a JButton and also a JTable.
Now my problem is that intitially am setting the value of each column in the table to zero.
But when I click the JButton i have to fill the JTable with all the new values.
Please hepl me out solving this problem.
I am really struck.
Regards
RAKESH SAGARIf other suggested links give you nothing - take a look at:
http://forum.java.sun.com/thread.jspa?threadID=699117
It seems Tjirpovf have code somewhat similar what you are asking for ("reply 5" - fill table with data from GUI). And you might even find my answer to his question useful ("reply 7" - fill table with data from file and save table data to file). -
how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?
Hi JN and Barry,
Barry wrote:
The second case may not be included in the available D&T formats in Numbers 3
For my region, the Date & Time data formats include month.
The Date Pop-Up
This may not be the case for all regions.
Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
Regards,
Ian. -
How to fill the master data in ecc
Hi,
0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
Regrads,
devi.Hi Devi,
Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data.
BDC and LSMW both are used for loading data into SAP system.
Or ask even directly they can create in ECC. If it is for your testing purpose, it is better to ask them to create master in source system .
Thanks
BVR -
Hi y'all..I'm using Numbers as my record for my expenses,income,etc.
I have a "date" coloumn eg "13 September 2011" and after I fill the date and move on to the next table, a "+" sign appear on my date table automatically, what's that?How do i delete that?That means your column is not wide enough to display all of the content. Widen the column & the + will go away.
-
How to empty extraction queue (LBWQ)
Dear BWers,
How do we empty the extraction queue LBWQ?
Thanks
RajHi,
For emptying the data from the extraction queue, run the collector pgms. They start with R...Then pull that data through delta infopackages so that the delta queue is also empty. But one thing is make sure there are no more transactions posted on the source system during this activity otherwise you'll get data in your extractor queue again.
Cheers,
Kedar -
How to fill the values in List Box?
Hi Experts,
Can anyone explain me how to fill the values in the List Box such that the value should be from the table?
For Example : Fill the EmpID from table T1 into the ListBox?
Thanks in Advance,
Regards,
Raghuhi,
and u doing it through report means from se38 than here is code...
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE mara-matnr,
END OF itab.
DATA : ok_code LIKE sy-ucomm.
CALL SCREEN 0200.
*& Module STATUS_0200 OUTPUT
text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'Z200'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'BACK' OR 'UP' OR 'CANC'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module mat_val INPUT
text
MODULE mat_val INPUT.
SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE itab
WHERE matnr BETWEEN '000000000000000101' AND '000000000000000109'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MATNR'
VALUE_ORG = 'S'
tables
value_tab = itab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " mat_val INPUT
<b>And this is flow logic..</b>
PROCESS BEFORE OUTPUT.
MODULE status_0200.
PROCESS AFTER INPUT.
MODULE user_command_0200.
PROCESS ON VALUE-REQUEST.
FIELD itab-matnr MODULE mat_val. -
How to Audit the data displayed within a Webi report
Hi All,
We have BOBJ XI R2 SP4 installed on our server.
One of the requirements is to audit the data the user has viewed through Canned reports and also Adhoc reports created in Webi.
I understand that we can audit what reports are accessed by the user, but not sure how to audit the data within the report. Could someone please let me know if auditing data can be acheived form SDK ? If so how ?
Thanks,
SireeshaPablo,
The following should get you started;
This is a report to pull Universe Name, Report Name, Action Time (last refreshed), Action Duration (execution time), User Name and Object Name (universe objects used in reports).
The Result Objects are as follows:
Object Name from Actions/Action Details
Action Time from Actions
Action Duration from Actions
Action Type from Actions
Action Type Detail from Actions (detail object associated with Action Type)
User Name from Actions
Document Name from Actions/Document
Universe Name from Actions/Action Details
The Query Filters are as follows:
Action Time between Day1 And Day2
Note: The Query Filter is necessary (obviously) only to restrict the size of the query. I wouldn't run this query without a filter on demand. Depending on the size of your deployment, you might want to restrict the query initially to a specific universe/list of universes while testing.
At the report level, I moved Universe Name and Document Name in to (nested) sections.
i.e.
Section on: Universe Name
Section on: Document Name
Table
Another option would be to retrieve this information from the CMS tables using WID Scanner [here|http://www.forumtopics.com/busobj/viewtopic.php?t=80856]
The last option would be to use the Report Engine SDK (for Webi) to write a program extract this information from the CMS tables and pass it to another table. WID scanner (above) does effectively the same thing, passes the info to an MS Access table (if I remember correctly..I may be wrong. I have'nt used it since it last tried to create a report to extract all used objects.)
Best,
Srinivas -
How to insert the data from XML to a table
Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
( "STABBRE" VARCHAR2(20 BYTE),
"ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
"ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed... -
How to find the data loaded from r/3 to bw
hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u allHi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV -
How to load the data from informatica into bw & how to report the data
Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22 -
Hi Experts,
I need small information.when messages are gone into queue state due to one message
When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
if i cancel the first message then remaining all the messages are processing successfully.
So from that cancel message i want sent the data manually as business needs that data.
Can all please tell me how to send the data manually with steps.
Thanks in Advance.
BhaskarHi,
I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
Regards,
Sarvesh -
How to save the data present in TEXT BOX?
Hi friends i am able to create a text editor in one of my screen but i want to know how to save the data when the text is entered in that text box and retrive when they open the screen?
Hi ,
Please check the format below since it is based on a working code
first you need to create a text in s010 function module...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju
Maybe you are looking for
-
8600 plus with mac osX, need to delete email addresses from scanner
Have Mac osX snow leopard, need to remove/delete email addresses from my scanner list. Have tried to follow other posts to solve but they don't seem to help as I can't find the specific network folder. Thanks, Chuck
-
Greetings, Background: Structured FM 7.2 book. First chapter of book is title and front page matter and in it there's a placeholder for importing the TOC. The book was delivered to me with a TOC file preceding the first chapter above, and the instruc
-
OSB: Need to get invoker information
Hi I have two three proxy services, PS_A, PS_B and PS_C. PS_A :- Invokes PS_C through service callout PS_B :- Invokes PS_C throught service callout In the message flow of PS_C, I need to identify at runtime if PS_A or PS_B has invoked PS_C. Identifie
-
Eclipse error: Project not built since classpath...
I am using JAXB to create my package...when I then import them into eclipse, I get the following error: project was not built since its classpath is incomplete. Cannot find the class file for org.relaxng.datatype.ValidationContext. Fix the classpath
-
9.0.2 9.0.2.6 upgrade
Anybody try the 9.0.2 > 9.0.2.6 upgrade? Care to tell what was involved, how it went, and were you happy with the end results? I'm curious because we have a two-tier Win2K 9.0.2 architecture in production and no development servers in which to test t