How to fill the field ITXNR??

Hi Gurus,
I am in a tight spot here.
Let's say I am loading data into HRP1000 {Objects Infotype}
using LSMW.
I have done the recording.
Source fields are OTYPE OBJID STEXT SHORT
Now, I am assumiing that field ITXNR in HRP1000 can be used to fill it with some legacy number.
can it be used???? Please enlighten me on this.
I would like to know how ITXNR can be filled. Should or can it be assigned any No. ranges???
Or shall I supply No.s from my excel sheet to it ; so that I will be able to extract the OBJID's generated for the legacy Numbers.
ITXNR is not there in my recording though. But it needs to be filled.
Please provide me inputs.
warm regards,
Hari Kiran

waiting for inputs ...

Similar Messages

How can I fill the field ITXNR

Hi Gurus,
I am in a tight spot here.
Let's say I am loading data into HRP1000 {Objects Infotype}
using LSMW.
I have done the recording.
Source fields are OTYPE OBJID STEXT SHORT
Now, I am assumiing that field ITXNR in HRP1000 can be used to fill it with some legacy number.
can it be used???? Please enlighten me on this.
I would like to know how ITXNR can be filled. Should or can it be assigned any No. ranges???
Or shall I supply No.s from my excel sheet to it ; so that I will be able to extract the OBJID's generated for the legacy Numbers.
ITXNR is not there in my recording though. But it need to fill it.
Please provide me inputs. My OM migration kinda depends on this now.
warm regards,
Hari Kiran

Thanks a ton for the answer andy.
Been waiting for it for so long.
I dont see much difference between HRP1000 and HRP1002.
Both have ITXNR.
Please enlighten me.
Basically, I have first loaded data into HRP1000.
then I gave my BIW team the OBID's generated.
Based on that they gave me the flat file for Relationships Infotype.
Now they dont know how to prepare the flat file for Work schedule.
So, they are saying they will provide me with a sequence number in the excel sheet and and i should be able to give them the OBJID generated for the corresponding sequence number in the excel sheet.
Confusing!!! ya it is to me too.
Any input is appreciated.
regards,
Hari

How to fill in fields in a PDF form? I have downloaded the Adobe Reader x 10.0.1.

I have the Adobe Reader x 10.0.1. Free version.
I downloaded a PDF form and open the document but cannot fill in any of the fields. With the form opened I look at File/Properties/security which shows "Filling of the form fields": Allowed.
I do not find "Typewriter" under view.
How can I type in to fill the fields
Regard

The window snip will let you see:

To create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

to create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

You need to be in a country to use its store - if you are not in the US with a US billing address then you cannot use the US store.
From the US store's terms of use :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

How to fill the values in List Box?

Hi Experts,
Can anyone explain me how to fill the values in the List Box such that the value should be from the table?
For Example : Fill the EmpID from table T1 into the ListBox?
Thanks in Advance,
Regards,
Raghu

hi,
and u doing it through report means from se38 than here is code...
DATA : BEGIN OF itab OCCURS 0,
 matnr LIKE mara-matnr,
 END OF itab.
DATA : ok_code LIKE sy-ucomm.
CALL SCREEN 0200.
*& Module STATUS_0200 OUTPUT
 text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'Z200'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
 text
MODULE user_command_0200 INPUT.
CASE ok_code.
 WHEN 'BACK' OR 'UP' OR 'CANC'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module mat_val INPUT
 text
MODULE mat_val INPUT.
SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE itab
 WHERE matnr BETWEEN '000000000000000101' AND '000000000000000109'.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MATNR'
 VALUE_ORG = 'S'
 tables
 value_tab = itab
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDMODULE. " mat_val INPUT
And this is flow logic..
PROCESS BEFORE OUTPUT.
MODULE status_0200.
PROCESS AFTER INPUT.
MODULE user_command_0200.
PROCESS ON VALUE-REQUEST.
FIELD itab-matnr MODULE mat_val.

Automatic creation of customer from BP - How to match the fields? CVI

I am trying to create a customer from a BP. I am done all the customizing steps.
Now I need to match the fields.
There is an error message with this field KNA1-SPRAS that doenst match
what should I do?
I have read this "In particular you have matched the required entry fields. You have to set all fields that are required entry fields in the customer/vendor account as required entry fields in the field selection control for your customer/vendor business partner roles."
Where do I set these fields and how do I know which fields to set?
Thank you for your help.

Hi,
I am trying to create a customer. I am done all the customizing steps.
Which steps do you follow to create? Please give me the details. Thanks.
After customizing, I created the business partner using the BP transaction. In the syncronizationcockit I still have errors messages when I select BP->Customer and then give the BP number. How should I do this correctly. Please if possible a screenshot will be good.
I have an error message that a field information is missing. I filled the field but still have the same error.
Thanks.

How to populate the field Discount Percent (DIS) in the outbound S1ORDEXC?

Hello all,
I am working with the Spec2000 to send out the IDOC S1ORDEXC.
Does anyone know how to populate the field Discount Percent (DIS)?
This field length of Discount Percent is 2 characters, but our customer discount in the Princing Conditions (Sales Order) is longer than 2 characters (ex: 7.500-%)
Thank you

Hello Thuan
I guess you are working with IS- ADEC and SPEC 2000. I am not an expert on this but leave you some hints from OSS notes I came across.
It appears like Discount Percent - DIS and Procurement Discount Percent -PDP are complementary and mutually exclusive. If one exists, the other need not.
Looks like DIS is computed as (100-PDP)/100 and it is just a 2- integer data (as in 20 Percent). It is a kind of multiplier (Factor), example if PDP discount is 10 percent, then DIS (Factor) is 0.9 and so final (net) price after discount = Price*0.9.
" If the discount comes in the S1BOOKED inbound into SD in the field DIS, then the discount has to be sent back in the DIS field .. if it came in the PDP field then it has to be sent back in the PDP field. If there was no discount in the incoming IDoc, then the discount has to be filled in the PDP if there was a change in the discount".
KDATE in SPEC 2000 file maps to DIS and KPERC to PDP.
PDP has 4 characters and per OSS note 440380, the point is ignored meaning you can work with 1225 instead of 12.25.
So may be you can work with PDP?
OSS notes: Apply to older releases but may still be applicable conceptually speaking.
456153 - S1ORDEXC does not send out Discount
440380 - PDP has only 4 characters in the SPEC IDoc instead of 5
596042 - Discount percent DIS not considered e processing S1ORDEXC
698668 - Incorrect calculation of unit price for PO item by S1ORDEXC
Let me know you final findings.

In sm30, when save, how to fill the table with the system data in the table

Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

Hi ,
Do like this.
1. Go to SE11 -> give your table name and press on change button .
2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
3.Assign Functin group if already have one , other wise create function group and assign
4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
5.Click on new entries
->Now press F4 in T column . Select "01" - Before saving the data in the database and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
ztable-username = sy-uname.
ztable-createtime = sy-uziet.
check and activate the code .
With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
Don't forget award points if it helps you.
Regards,
Raghav

How to change the Field Symbol, so Adobe Forms takes it as a Table?

Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?

Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name TYPE rs38l_fnam,
 fp_docparams TYPE sfpdocparams,
 fp_outputparams TYPE sfpoutputparams,
 it_kna1 TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN' "& Form Processing: Call Form
 CHANGING
 ie_outputparams = fp_outputparams
 EXCEPTIONS
 cancel = 1
 usage_error = 2
 system_error = 3
 internal_error = 4
 OTHERS = 5.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME' "& Form Processing Generation
 EXPORTING
 i_name = 'ZAF_FS_1'
 IMPORTING
 e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
 EXPORTING
 /1bcdwb/docparams = fp_docparams
 it_data = it_kna1
* IMPORTING
* /1BCDWB/FORMOUTPUT =
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
6) Output -
BR.

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

How to hide the field from the view in the webdynpro application?

Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
Dharani

Hi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani

How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?

Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W

How to determine the field size

I am going to make a multiplatform application that hopefully
will run on linux and windows 2000.If the os is 2000, then I will use
vb.net/aspx else I'll use java servlets. I make the connection
to the web server ( through HTTP) not directly to database server.
So, the resultset will be stored in the String object. The columns
will be separated by delimeter. Our problem is how to determine
the size and type of the fields of mssql,oracle and postgres database
so that we can include it in the String object.
Ex.
String sResultSet=new String();
ResultSet rs=statement.executeQuery(sSQL);
while(rs.next()){
sResultset=sResultSet + rs.getString(field1) + "||" + rs.getString(field2) + "||";
vertical bars acts as delimeter
supposedly this is the code:
sResultset=sResultSet + rs.getString(field1) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||" + rs.getString(field2) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||";
supposedly this is the code if rs.getFieldType() and rs.getFieldSize() methods are existing
Anyone can give me an idea how to get the field type and field size of the database?
thanks in advance

Yes, but I dont know how to do it.
Can you give me an example of using it.
Thanks in advance

How to get the field COMPLETION in extract layout

Hi,
Does anyone knows How to get the field COMPLETION in extract layout? i have not been able to find it and it is imperative to have it for implementing a new evaluation.
Thanks a lot for your help.
CAMILO URIBE

Hi Neil,
The following steps describe what we did to get the new evaluation:
1. Define Attributes and Object Types for Evaluations: here we added a new field for evaluation. The field was COMPLETION (degree of processing in percent), with relevant object "TASK". "No Summarization" was configurated as Rule for Summarization
2. Define Extract Layouts: here we created a new extract layout for evaluation. The objects and attributes to be used were defined (the field COMPLETION was defined as attribute).
3. Assign Extract Layouts to Project Types.
4. Define Evaluations: the new layout for evaluation were created using the attributes.
5. Define Severity.
6. Define Threshold Values. In the new evaluation the field COMPLETION was used in the formula.
After configurating and testing, we have noticed that the values of field COMPLETION are not taking into account. It does not matter which value it has, evaluation always take 0.
Thanks for your help,
CAMILO URIBE

How to get the field name of an internal table during runtime?

How to get the field name of an internal table during runtime?

Hi Sudhir,
Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
Example Code:
 DATA: v_field(60). " Insert this code.
 GET CURSOR FIELD v_field. " Insert this code.
 CHECK v_field = 'ITAB-KUNNR'. " Insert this code. (or)
Write: v_field.
Regards,
Ramganesan K.

How to fill the field ITXNR??

Similar Messages

Maybe you are looking for