How to fill up set up tables for 2lis_03_UM and BF?

Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanks

Hi,
I think you can follow the same procedure.  After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM

Similar Messages

  • Filling of set up tables for Full and Delta updates

    Dear Gurus,
    How do I go about filling the set up tables if I want to load historical data to BW using LO **** pit when set up table is running on delta ?
    I want to know how many set up tables will be there for each data source, Because if set up table is running on delta and using the same table I want to load historical data also then will I have to delete and fill set up tables or there will be a separate set up table for full upload and delta ?
    If we have multiple set up tables for one data source then in the T-code OLI*Bw, where * -> App logistics num, so to fill I just say OLI6BW, then which set up table it is going to refer.
    Clarify my doubt and get rewarded with plenty of points.
    Regards
    Mohan

    Hi,
    Filling up the set up tables depends on the datasource.
    there are different T-codes for the respective extract structures
    OLIIBW transaction PM data
    OLI1BW INVCO Stat. Setup: Material Movemts
    OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
    OLI3BW Reorg.PURCHIS BW Extract Structures
    OLI4BW Reorg. PPIS Extract Structures
    OLI7BW Reorg. of VIS Extr. Struct.: Order
    OLI8BW Reorg. VIS Extr. Str.: Delivery
    OLI9BW Reorg. VIS Extr. Str.: Invoices
    OLIABW Setup: BW agency business
    OLIFBW Reorg. Rep. Manuf. Extr. Structs
    OLIIBW Reorg. of PM Info System for BW
    OLIQBW QM Infosystem Reorganization for BW
    OLISBW Reorg. of CS Info System for BW
    OLIZBW INVCO Setup: Invoice Verification
    OLI7BW is the tcode for Sales Order.
    Hope this solves Ur issue....
    Assign points if helpful..
    Rgs,
    I.R.K

  • Error while filling the set up table for 2LIS_11_VAITM

    Dear Experts,
    i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
    The error was "Company code for sales org 9000 does not exist (document 1326)".
    when i checked the document in the Header table VBAK,company code was blank for the document .
    Company code was there in the selections for the setup table.
    The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
    Could you please help me out to over come the problem.
    Regards,
    Sunil...

    in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
    you'll have to enter at least '1' here in your case
    it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
    (under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

  • Filling of set up tables for several company codes

    hi
    i am filling a set up table for the application specific inventory control statistical data. But while setting up data filling selection parameters contains selection parameters for the single Company code.
    But in my scenarios there are several company codes whose data resides in the R/3 and i need to bring data for all company codes in the set up table.
    so now filling up the data in set up table, shall i have to fill up data for individual company code, OR i have to fill data for one company only and on delta load data pertainig to other company codes will be populated to the set up tables.
    kindly give ur expert advice in this situation.

    Hello,
    i dont understand why should it be mandatory to fill the company code on r/3 side while initialisation!!
    But even if it is mandatory, u have to do one by one init runs on R/3 side for all company codes that you need.
    Check in rsa3 for records after the init runs.
    If it was not mandatory, u could have run the setup(init) run on r/3 side for all company codes at a time by keeping the field blank!!
    Also again in the BW side you can have company code for selection in the infopakage!! there u can also have it as a range rather than running for one at a time.
    Hope it is helpful now..
    regards,

  • Set up tables for 2LIS_03_UM (OLIZBW)

    Hello Everyone,
    I was working on the 2LIS_03_UM extractor, after finishing the fill up of set up tables for BX and BF extractors and when trying to fill up the set up tables using the OLIZBW transaction code I observed that Company Code is mandatory.
    Can you guys please suggest if there is a special process or a work around where I would not have to go through this program for 774 times (we have 774 company codes in the system).
    So, please let me know if there is a workaround for this situation.
    Thanks
    Dharma.

    Yes, sorry to say that you must run it 774 times. 
    There is a possible work around.  Schedule the job for 1 company code, then create 774 steps for the job.  You will still have to run 774 times, however, if you place everything in the job steps, you will save some time since you don't have to sit and wait for 774 jobs to finish.
    I know it's a pain .... and I thought my 80 CC jobs were a pain ....  I feel for you on this one!

  • Error while filling up the setup table for 2LIS_11_VAITM...

    Hi
    I am trying to fill the set up table for Application 11since i want to work on data Source enhancement = 2LIS_11_VAITM , but while performing fill set up, I am getting following error:
    Error determining rate: foreign curr. INR local curr. USD date 07.01.2002 (doc. 7484)
    Pls. let me know how can i exclude this document number in OLI7BW.
    Pls. let me know if you have any reply on it.
    Thank You....

    Hi,
    I think there is no option to exclude the documents from the selection. I have a small suggestion,not sure whether it works .There is a field 'No. tolerated faulty documents' .You can enter some no here and try that again. If still you get the problem, ask the functional consultant to correct the document.
    Thanks

  • Error while filling up set up tables in SAP R/3

    Experts,
    I trying to fill up set up tables for application component 11 (SD) for my LO extraction. It gives me the following error
    <b>Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)</b>
    when I check in RSA3, I have data before 06/19/2007 but nothing is filled up after that.
    Does anyone know how to fix this?
    Thanks
    Ashwin

    Hi Ashwin,
    Did you get the solution for issue(filling the setup tables for applicaion component 11)
    "Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)"
    thanks in advance.
    Bhaskar.

  • How to check whether set up tables are filled or not

    Hi Gurus,
    How to check whehter set up tables are filled or not?
    Cheers,
    Reddy.

    Hi Reddy.......
    And another point I want to make u clear............LBWQ is not the Delta Queue.............Delta queue is RSA7...............it comes into play in delta loading.......LBWQ is Extraction Queue.........While delta loading....if we use the Update mode Queued Delta........then any Changes will not directly get updated in the Delta queue.....For the Delta set up.........
    1) First u hav to run init with data transfer(After filling the set up table)
    2) After that any Changed ........will be recorded in the Extraction Queue(LBWQ)........
    3) After a certain number of records get accumulated in LBWQ........We hav to run V3 jobs to bring the data in the Delta queue(RSA7)...
    Check this.....
    Re: question on LBWQ and RSA7
    Regards,
    Debjani.....

  • How to extract data into the set-up table for 2LIS_06_INV LIS structure

    We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV  (Invoice Verification) structure. Interestingly, I don't see any Events under this structure  (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
    I see Invoice Verification when I use the Inventory Management -Perform Setup  option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
    Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
    Thanks,
    Sanjay

    1: RSA5 Activate Data Source
    2: LBWE Activate datasource again
    3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

  • Error while filling set up tables for 2LIS_11  data sources

    hello All ,
    I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
    Job started
    Step 001 started (program RMCVNEUA, variant &0000000000005, )
    Start of order processing
    Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
    Job cancelled
    Is there any setting required in R3 side before filling setup tables of SD ?
    I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
    Regards ,
    Amol Kulkarni
    Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
    Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

    Hi,
    one of the sales document currencies is not maintained properly in the system and therefore its failing.
    you need to correct those documents before filling the set up tables.
    Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
    This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
    generally you will see the sales doc number in the error for which its failing.
    May be at the time of filling some óne was working on some sales document and tried it save it.
    correct that doc and fill the set up tables again.
    Thanks
    Ajeet

  • Filling the set up tables

    Filling the set up tables
    I am mentioning here the run name, Termination date & time ( time how many minutes I have to increase is it like that for these many records these much time we have to mention) I say execute ,it is giving me the error
    Error determining rate foreign currency INR local currency
    Eur date 02.01.1997(doc 4969)
    What I should do to solve this
    what I did is I  specified the doc no from 33 to 4968
    & executed then it is asking for archive session, what is this archive session & is it mandatory to specify the archive value ,if so what value I should specify in that
    Thanks in advance

    Hi,
    <i>Error determining rate foreign currency INR local currency
    Eur date 02.01.1997(doc 4969)</i>
    Here the Curency conversion factor maybe missed in R/3 .Show this error to your FI functional peoople to slove this.
    With rgds,
    Anil Kumar Sharma .P

  • How to find R/3 table  for FI and PS Datasources

    Hi,
    Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
    Thanks
    Shanthi

    Hi,
    To find DS assigned to a table.
    How to find the Datasources for the given table names ?
    How to find the Datasources for the given table names ?
    To find Tables assigned to a DS.
    USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
    retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Thanks,
    JituK

  • How do we populate the SIGN_POST table for routing server

    Hi,
    How do we populate the SIGN_POST table for routing server…? We having the Street data network... we have populated the NODE, EDGE and PARTITION tables from street data. Is there any procedure available for populating the SIGN_POST table from street data? ARE there any predefined methods available?
    Thanks and Regards
    Aravindan

    This data has to come from the data provider.
    There are no procedures to populate this information, if this
    data is not available for your data set.
    For example, NAVSTREETS from NAVTEQ has this data as part
    of their street network data.
    siva

  • I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

    I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

    To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
    Email message files can be read as plain text in TextEdit or any word processor.
    To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
    It may work, but it seems like a lot of unnecessary hassle.

  • How to set userlevel permission for GFS and NFS

    hi
    how to set userlevel permission for GFS and NFS?
    regards

    hi
    http://www.redhat.com/docs/manuals/enterprise/
    AND
    http://en.tldp.org/
    probably your best bet.
    regards

Maybe you are looking for

  • Dúvidas sobre B2B

    Bom dia ALL, Tenho algumas dúvidas  a levantar em relação ao B2B - XML Email. Primeiro ponto) Caso o fornecedor envie uma nota fiscal que esta em duplicidade, usando ou não a solução GRC, vou receber duas vezes na caixa de e-mail ? Se isso acontecer,

  • PO Std Workflow stuck "In Process" status

    Dear Experts, I have a case where a PO workflow is stuck "In Process" for over 8hrs. The background step - that has the underlining method to set status of PO to released is stuck and has not completed. (WS14000145) I am not sure of what could have b

  • Inbox icon number gone

    Since I installed 10.4.7 the number of msgs in the inbox has disappeared on the mail icon in the dock. I checked and the Helvetica font appears to be enabled. Any ideas?

  • How to get the  ESS & MSS users in ECC 6.0  into portal

    Hi Experts How to get the  ESS & MSS users in ECC 6.0  into portal Thanks Daya

  • How to tokenize clob

    I have text-documents stored in clobs and would like to create a sinlge table for each document listing all the words that occur in the text. Is there a funktion in PL/SQl that can solve my problem easily?