How to filter the Dimension data automatically when data source is ESSBASE?

Hi Experts,
Since the datasource is ESSBASE,when I only drag the Dimension column for displaying, it will show any redundance value,and it will not be related with Fact Table.
I try to edit the formual as below, it does not work.However, the datasource is relation DB, it will be OK. Why? Are there any missing steps?
Whether it need the MDX , Thanks.
Case when 1=0 then cast(Sales as char) else Year end
OR
Case when 1=0 then Country else Year end
For example,
Year
1999
2000
2001
2013
2014
2015
...

Yes right,
AFAIK there isn't a filter feature for Event Hub. The only way to have now is to put a specific property inside your EventData that consumer group can check to filter if it is interested in the data or not.
Paolo.
Paolo Patierno

Similar Messages

How to expand the hierarchy column automatically when delivery reports by a

Hi Experts,
In OBIEE 11.1.1.6.0,how to expand the hierarchy column automatically when delivery reports by agent?
For example:
In SampleLite RPD, when we drag "Time Hierarchy" and Sales column into the report , and sent it by agent ,it will only display "Total" sales, not show all level value,such as Year,Month,Day.So how to expand the hierarchy column automatically when delivery reports by agent?
If we expand all levels and save them, it will be ok, however, when we add new data, it will be collpased automatically and not show the lowest level data, requiring Users or Developer to modify this report for expanding the hierarchy. We think it is very trouble, is there any good suggestion or method for achieving our requirement?

958054 wrote:
Hi Dpka,
Is it any difference? I look at the result is same.
Firstly, you said it is 'Add member of ',
Now, you said it is 'Keep member of'
Could you please tell me which options I must select ? Thanks very much.Here is some notes from the documentation to make a better sense of how those two options would work:
•Selection steps — When you create selection steps, you can add a group or a calculated item in a step. Subsequent Keep Only or Remove steps might reference members that were included in the group or calculated item.
◦A group list is affected by members that are kept or removed in subsequent steps, but the group outline value remains the same. For example, suppose the MyNewYork group contains Albany and Buffalo and its value is 100. Suppose Albany is removed in a later step. The value of the MyNewYork group remains at 100, but Albany is no longer listed with the group.
◦A calculated item is not affected by members that are kept or removed in subsequent steps, because removals can affect the components of the formula.
•Groups and calculated items — A step can include a group or calculated item. Groups and calculated items can be used only with Add steps; they cannot be used in Keep Only or Remove steps.

How to set the POV in WebAnalysis when data source is HFM?

Hi Every one..
Could any one tell how to set pov in web analysis when data base is HFM. And hoe to make the report Dynamicall (Current Pov Member like in FR). for this if use Essbase Ican get it it easiliy by using Subtitutional variable but is ti possible fo rHFM.
Thnaks in advance
Rao

yeas agree with sanakar,
this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
Hope u understand this.

How to filter the data in dropdown?

Hello,
How to filter the data
I got all the project name in dropdown when you select the project name in other textbox the project id will come automatically.
so I want to get only those project name that is assigned to that particular user.
I have
ProjectName(dropdown),
ProjectId(Textbox),
Employee code(Unique value),
employee Id (Unique for particular employee means if User A works on 5 projects so for all 5 projects the employee Id will be same),
Project Id( 5 projects 5 different id)
I didnt get the exact formula or I have to use any javascript code.Any help...
Thanks,

If I am understanding correctly, you want to populate a drop down with values from a list.
Using InfoPath:
right click on the drop down to be populated, and choose drop down list box properties.
add the list with the values as a data source.
click the filter box next to entries.
select the field you want from the other list.
click filter data.
set the filter (click AND if you need more lines).
click OK on any dialogs you need to to get back to the editor.
Test your form.

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms.
How can i do this?

Hi,
You can select the Payment Term at PO Header Level.
When you book an invoice, that Payment Term will automatically defaulted to Invoice.
You can define Payment Term in AP.
Payment terms have one or more payment terms lines, each of which creates one scheduled payment. Each payment terms line and each corresponding scheduled payment has a due date or a discount date based on either a specific day of a month, such as the 15th of the month, or a number of days added to your terms date, such as 14 days after the terms date.
Payment Terms (Oracle Payables Help)

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

How to filter the data in different sections (e.g. Report Footers)?

Hi,
I am using Crystal Reports 11 to generate cross-tables.
I plan to generate 3 cross-tabs, and each cross-table will be put in a section. For example, cross-tab1 in Report Footer a; cross-tab2 in Report Footer b; cross-tab3 in Report Footer c.
I know use "Select Expert" to filter data. But, it seems that "Select Expert" filters data for the whole report.
I want to filter the data for each cross-table separately. For example, filter cross-tab1 based on condition1; filter cross-tab2 based on condition2; filter cross-tab3 based on condition3.
How to filter the data in different sections (e.g. Report Footers)?
Thank you in advance.

Hi,
Now that you've inserted the subreport just right-click the sub-report and click Edit. The Design page for sub-report should open up.
You can now insert the cross-tab on the Report Header and insert a record selection formula of your choice.
Also, suppress all the other sections of the subreport so the Main report only shows the crosstab without any spaces.
Do the same for all the subreports.
-Abhilash

My iPod touch 2nd gen keeps turning the volume down automatically when i am doing things on it how do i fix it

my iPod touch 2nd gen keeps turning the volume down automatically when i am doing things on it how do i fix it? This happens when using the volume control buttons and the volume option in settings. It keeps turning itself down to silent. Any ideas?

?

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

In windows 7, how do I make firefox start automatically when I turn on the pc.?

In windows 7, how do I make firefox start automatically when I turn on the pc

That worked, thanks. When I turn on the pc, I almost always go to the internet before anything else, so this eliminates one step. It doesn't seem to save any time, however, but it is easy. If anyone else wants to try this, it looks like it's very easy to undo if you change your mind.

How to get pricing date automatically when billing

Does anybody know where can I set, to get pricing date automatically when billing? (BTY must by the Sales order type)?
Thanks you guy.

Hi check in t-code VOV8 and enter sales order document type you can see pricing date setting as well as you can change manually pricing date while billing creation of billing VF01.
Hope this will help you.
Best Regards
Sainath

How to disply the input text box when the data in the table is empty

Hi,
I m using JDeveloper 11g 5.1.1.1 : How to display the Input text box when the data in the table is empty or by using the dual table.
Since there is no record in the table, screen is displying only the lable. not displying the Input text box.? Any property is there to enable?.
One more case i tried by using dual (eg Select '0' as name from dual) created one view object and dragged in the JSF screen as input combo box with list of values.
In this case also it is not displaying the combo box.Just displaying the Lable name and 0 only.
Regards
Bijesh K

Hi,
I didn,t get you.Could you please explain. I am not choosing the ADF table. Selecting and dragging ADF form only.
Regards
Bijesh K

How to filter the data on Reports from collected from differnet Agents

1) I have to write a Plug-in which would fetch the same type of data from 7 Agents. I need to generate the report for each Agent separately,This plug-in will be deployed in various different environment. So I will not know the host name as it will be deployed different environment. Can anyone suggest how to filter the data for each agent from the table. I see one solution of using Bind variable for the Target GUID in PL/SQL file. Can you please suggest if there is any other better way of doing this.????
Also Can you please suggest what are the best ways to debug the OEM Plug-in?
Thanks Anyway.....

What I mean filtering data means displaying data for each Agent Seperatly. Assume I have collected Filesystem data from 5 Agents (5 different server). Now I want do display file system data for Agent1 (server 1). How would I fetch it from MGMT$Metric_Current. Currently I use a bind variable
??EMIP_BIND_TARGET_GUID?? to filter the data for a Agent from MGMT$Metric_Current view. I compare Target Name entered while deploying Plug-in with the Target_Name column of specified view.Is there any other way of fetching data from this table for a Agent?
I hope I am prety clear now. My Problem is IO dont want to force user to enter exact Server name while deploying Plug-in.
Thanks......

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to filter the Dimension data automatically when data source is ESSBASE?

Similar Messages

Maybe you are looking for