How to find 2 different projects are using which gl accounts and co pa char

Hi ,
There are 2 different project id s , now how to find differences between them regarding using of G/L accounts and required characteristics for the COPA module ?
Thanks & regds
Ramachandra

hope you are talking about the value field for COPA.
Please go to the project profile and find out the settlement profile, and from settlement profile find out the PA transfer structure, and check the PA transfer structure for COPA value filed details.

Similar Messages

I keep getting a message about my phone number being used for iMessage on a new iPhone. How can I see what devices are using my iMessage account and phone number?

The message "Your phone number is now being used for imessage on a new iPhone" Keeps appearing on my macbook pro. It also says "If you just activated iMessage on a new iPhone, you can ignore this alert." But the only option is to ignore the alert, because the only thing I can do with it is click "ok" and dismiss it. Is there a way I can look at a list of the devices using my iMessage account, and if there are devices that I don't recognize on that list, how can I block them from using my account?

Hi If you have another Apple device check on that screen & accept. Cheers Brian

TS4036 I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

Welcome to the Apple community.
You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc.

How to find whether user exits are used in the query or not??

Hi ,
I have to make the list of queris in which user exits are used.
Please any body help me how to find the queries in which user exits are used.
Thanks
Maruthi

Hi Maruthi,
Using table RSZGLOBV you can find out the queries that have customer exit variables.
Set filter VRPROCTP (processing type) = 3 means customer exit.
and the field COMPID will give you the Query name.
Best Wishes,
Mayank

How to find the processor we are using in C code

I have to run a code on both solaris and linux.But before running the code i want to know which processor it is going to run and accordingly i can insert processor specific functions or code........is there are any preprocessors in c which can help to find it

By "processor" do you mean the computer chip compiling the code, the computer chip executing the application, or something else?
Standard C provides no way to find out what chip you are using, but most platforms provide a way, different for every platform. By "platform", I mean the combination of computer and operating system.
Using Sun Studio on Solaris, the compiler predefines some macros that tell you the class of computer being compiled for. See the C Users Guide for details. On a SPARC system, the compiler predefines the macro __sparc. If I'm compiling for 64 bits, it predefines the macro __sparcv9. On an x86 or Opteron system, it predfines the macro __i386. On an Operton system in 64-bit mode, it predefines the macros
__x86_64 __x86_64__ amd64 _amd64__
The Solaris OS provides ways to find out the architectural characteristics, mostly via command-line utilities such as prtconf, psrinfo, and others. Linux provides x86conf.

How to find out what modules are used

In /etc/rc.conf there are a lot of modules that are loaded that don't need to be, like modules related to OSS. Is there some command that'll show me what modules are being used at the moment and/or what they do?

Yes Thinkpad FTW! Back on topic; so there are three columns: Module, Size and Used By. In the used by column what do the different numbers mean?
I ran "lsmod | less" to be able to view each individual one. (That "| less" part is really useful)
Last edited by jordanwb (2008-08-07 01:59:15)

How to find out what iviews are using a particular system

EP NW2004 SP 17
We are trying to see which iviews are associated with a particular system. I've tried using Content Admin -> Multiiple property Replacement. I add our corporate folder to the 'Selected Objects' -> click next. I then select 'iview' then 'system'. I then select radio button 'search objects by property value' and enter current value of the system in quest and new value with the same system in question. I get like 1,400 hits and the list can not be displayed.
Thanks in advance
-- Steve

Hi,
this was a really good idea. Since the list is so big, I could think of one other very simple way. Why don't you try to export the complete PCD content as a XML (via the [XML Content and Actions|http://help.sap.com/saphelp_nw70/helpdata/en/93/28f999daa6434a845da6bf9ab5072c/frameset.htm].) In the resulting file you should also be able to search for the system alias and from there get the iView (with the complete PCD path).
Of course there is certainly a way to develop some code which can do the same for you.
Regards,
Holger.

How to find the objects that are used for a particular BEx query

Hi ,
I am preparing the inventory for BEx queries. Means for a particular BEx query I want to know the correcsponding
1. Selection screen variables
2. Characteristics
3. Restrcited, Calculated and normal key figures.
I have checked all the BEx query related tabe but unable to find the proper relation between these tables to get the desired output.
Can you help for table joins to get the output as mentioned above.
Thanks in advance.
Regards,
Sai

Hi,
you want find the total information about query details use the T CODE - RSRTQ.
give the proper selection then execute.
please find the doc.
RSRTQ – Query Definition – Multipurpose T-Code on BEx Queries
Thanks,
Phani.

How can I block a website without using an admin account and other accounts for my children?

i want to block a particular website so my children wont see it, but i cant seem to find a way to restrict it without having to create different accounts; i would like to just block it on this account, like on the restricted sites option on internet explorer, is there any way?

For just simple site blocking, try BlockSite: https://addons.mozilla.org/en-US/firefox/addon/3145/
You can password protect BlockSite, but it is possible to bypass.
For full parental controls, there is FoxFilter: https://addons.mozilla.org/en-US/firefox/addon/4351/ - however this seems to be fee supported.

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

How can I find out whitch table are used in whitch document?

How can I find out whitch table are used in whitch document?
In the table EUL5_DOCUMENTS are stored the Documents and in the table EUL5_OBJS are stored the tables. How can I query these tables together?
Are there other possiblities?
Thanks

Hi Dierk
Please take a look at this thread: Re: An EUL query to list out All the Columns (Fileds) for each Workbook
I think you may well find what you are looking for in the answer that I gave there.
Best wishes
Michael

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to find those different namespaces in schema?

Hi,
I heard that schema contains different name spaces. how to find those different namespaces in schema?
I checked with this but it is throwing "table or view doesn't exist".
select namespace from v$librarycache;
Thanks
Praveen

Are you referring to this? From the SQL Language Reference manual under Schema Object Names and Qualifiers
7. Within a namespace, no two objects can have the same name.
The following schema objects share one namespace:
Tables
Views
Sequences
Private synonyms
Stand-alone procedures
Stand-alone stored functions
Packages
Materialized views
User-defined types
Each of the following schema objects has its own namespace:
Indexes
Constraints
Clusters
Database triggers
Private database links
Dimensions
Because tables and views are in the same namespace, a table and a view in the same schema cannot have the same name. However, tables and indexes are in different namespaces. Therefore, a table and an index in the same schema can have the same name.
Each schema in the database has its own namespaces for the objects it contains. This means, for example, that two tables in different schemas are in different namespaces and can have the same name.
Each of the following nonschema objects also has its own namespace:
User roles
Public synonyms
Public database links
Tablespaces
Profiles
Parameter files (PFILEs) and server parameter files (SPFILEs)
Because the objects in these namespaces are not contained in schemas, these namespaces span the entire database.Which is why you can do:
SQL> create table t (id number, descr varchar2(10));
Table created.
SQL> alter table t add constraint t check (mod(id,2) = 0);
Table altered.
SQL> create index t on t(id);
Index created.
SQL> create trigger t
2 before update on t
3 begin
4 dbms_output.put_line('T Trigger');
5 end;
6 /
Trigger created.but not:
SQL> create view t as select * from t;
create view t as select * from t
ERROR at line 1:
ORA-00955: name is already used by an existing objector
SQL> create procedure t
2 begin
3 null;
4 end;
5 /
create procedure t
ERROR at line 1:
ORA-00955: name is already used by an existing objectJohn

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?
We are two people using three difrent Macs, 1 Iphone and 1 Ipad with separate USERS on each Mac but sharing the same Apple ID: xxxxxx
I set up the first user to iCloud and it was OK but when I set up the second user to use iCoud the first users's info gets mixed with the second user's info?
Do we have to set up a diffrent Apple ID for each other?
Sometime ago I added my friends E mail (yyyyy) to the main Apple ID (xxxx) as for using his E mail account (to separate our e mail accounts, and it's working ok) but now when I try to create a new apple ID whith the same friend's e mail (yyyyyy) it says that his mail (yyyyy) is already an apple ID when the Apple ID is really my E mail (xxxxx)... any clue?
Thanks

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How to find 2 different projects are using which gl accounts and co pa char

Similar Messages

Maybe you are looking for