How to find a path in Application server?

Hi,
I have a reqirement that i need to download the original document which is attached in the DIR links for each line item in the PO.
Say for Eg. user is uploading the original document in CV03n.
Through program i have to download it and save it in local desktop.
But as per my concern when user uploads that document in CV03N, it should get updated in application server.
I wants to know how can i find that path through the document got updated in AL11.
Please let me know if you have any idea on this.
Also please let me know if my question is not clear.
Regards,
Prabu

Hi Prabu,
It depends on how DMS is implemented in your place.
If DMS is implemented along with CONTENT SERVER, then the actual document uploaded is stored in CONTENT SERVER and only a link is saved in SAP DB and whenever you refer to this link the image is being retrieved and displayed.
If you dont have content server then the uploaded documents are stored in your application server only. Generally the big companies which implement DMS do have a content server otherwise DB size will grow enormously in no time.
Once you check out the basics of ur requirement, then search through FM's available related to DMS.
Hope this answer helps.
Regards,
Lakshmi Narayana

Similar Messages

Function module to find the path of application server

Hi can any one say me what is the function module to find the path of the application server

Hi ,
What i understand from ur question is that u need path for application server from the presentation layer i.e user screen.
u can achive the path this way
parameter: file type filename-fileintern.
when user presses F4 here, it will show the directories and path in the AL11.
I didnt find any FM which will get the path of Al11.
revrt back if any issues,
Regards,
Naveen

How to find characterSet of Oracle Application Server

How can I find out the character set that was installed when Oracle Application Server was installed?

- Refer to the OAS Globalization Support Document.
Oracle® Application Server Globalization Support Guide
10g Release 2 (10.1.2)
B14004-02
- Read with care these sections:
6.1 Installing Oracle Application Server for Global Deployment
- Also note that
"The NLS_LANG parameter controls the locale of the runtime environment on which OPMN runs. It should correspond to the default locale of the middle-tier runtime environment, which is the default locale of the operating system. The same NLS_LANG parameter is inherited by the OPMN managed processes, such as Oracle HTTP Server and OC4J, unless it is explicitly specified with a different value in opmn.xml.
For Microsoft Windows platforms, the pre-configured NLS_LANG is automatically registered in the Win32 registry as the NLS_LANG registry key at \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOMEn. The NLS_LANG value in this registry key controls the locale of the runtime environment on which OPMN and its managed processes run. "
- Also note that the NLS_LANG parameter values will have different requirements for a monolingual and multilingual application architectures.
- to find the character set of infrastructure db or metadata repository, you may use the db method to find the character set installed.
SELECT * FROM nls_database_parameters WHERE parameter = 'NLS_CHARACTERSET'
hope that helps!
AMN

How to find open connection in application server

how find out how many request are hit in applcation server and reuest comes from which computer. if there r any solution plz give post the ans.

You could start reading the access logs of apache....
or check the server-status page...
or check in EM-website....

How to find if a SAP Application uses Shared server process ??

Hi,
Please find the details below wrt to SAP application:
SAP Release : SAP ECC 6.0
Oracle database Version : 10.2.0.4.0
Can you please tell me how to find if my SAP application with oracle uses Shared server mode or Dedicated server mode for oracle database access??
regards,
Arul S

Hi Nick,
Thanks for your reply.
I am also pasting the output of "lsnrctl services"
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=R1Q.WORLD))
Services Summary...
Service "R1Q" has 1 instance(s).
Instance "R1Q", status UNKNOWN, has 2 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
      "DEDICATED" established:269921 refused:0
         LOCAL SERVER
The command completed successfully
This looks like dedicated connection with the Oracle database..
Can you please comment on this?
Regards,
Arul S

How to find out the web/app server used by OBIEE and OBIEE HomePath (Urgent

Hi All ,
I have two questions
1) I wanted to know the OBIEE home path if it is installed on the some other machine (Client's Machine).
I wanted to update the .css files present on the machine, but before updating the file i should know the home path, to reach the desired .css file and update accordingly. I dont know where they have installed OBIEE.By default OBIEE home is (c:\) but if the user has selected some other drive then, how we can find the OBIEE Home path?
I have the access to the machine.
2) The path of the CSS files depends on the web server used by OBIEE.
When IIS web server is used, the CSS files in OracleBI_HOME\web\app\res directory
when OC4J is used, the CSS files in OracleBI_HOME\oc4j_bi\j2ee\home\applications\analytics\analytics\res
so inorder to update i must know which server is being used.
Is there any way to find out which web application server is installed on the clients machine?
Thanks in advance.!!!!!

Please see responses to your first posting here: OBI EE Home Path

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

How to upload XML file from Application server.

Hi,
How to upload XML file from Application server.Please tell me as early as possible.
Regards,
Sagar.

Hi,
parameters : p_file type ibipparms-path obligatory.
***DOWNLOAD---->SAP INTO EXCEL
filename1 = p_file.
call function 'GUI_DOWNLOAD'
exporting
BIN_FILESIZE                    =
    filename                        = filename1
    filetype                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = 'X'
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
tables
    data_tab                        = it_stock
FIELDNAMES                      =
exceptions
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   others                          = 22
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards,
Deepthi.

Can any one tell me how to write open hubs to application server?

Hello Everone,
I created open hubs and my requirement is to write the file to application server. So, I created logical file name and logical paths as specified in below link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
That is created 'logical file path defination' in 'FILE' transaction. Used the physical path as - 'bw/FTPOUT/BPR/GM/<FILENAME>' as given in above link..
In logical file name I used the above logical file path.
When I run the open hub, I'm getting the ABAP dump "UNCAUGHT_EXCEPTION
CX_RSB_WRITE_ERROR
12/18/2008 09:00:40"
Can any one tell me how to write open hubs to application server?

Hi David,
Goto transaction code - FILE
1) Create a Logical File Path definition, enter the technical name and description by clicking new entries and save it.(z_ftp)
2) create a Logical file name definition using cross client,
enter the logical file name = z_ftp , name = ftp , physical file = ftp_test.txt,
dataformat = ASC, Appln area = BW and Logical path = z_ftp(created from step 1).
click SAVE button.
3) Assignment of physical paths to logical paths, choose your logical path here.
enter the syntax group = UNIX
Physical path = /bwftp/....
Save it .
In the openhub,
choose definition type = file
Check the applicaion sever.
servername = dev
type of file name = Logical file
Applin server file name = z_ftp
separator = |
Hope this helps and solve your problem.
Thanks
Sat

Convert file path in application server as link

How can we convert file path in application server as link to send email.
Thanks
Suresh

Your app server folders have a mappable location on your network, e.g,
server\path\filename. Use an HTML anchor tag and build the link with code. You'd be better off storing files on a file server (write to a mapped location from the app server) and link to there (same process).

How to download from spool to application server

Hi all,
   Can any one tell me how to download from spool to application server. Quick response would be appreciated.
thanks
mahesh

Hi Kilaru,
Please find the sample code for your req,t and let me know if you found any difficulty on the same.
<b>Just copy paste the code :</b>
This will Convert spool to PDF format and download.
data: w_ident     like tsp01-rqident,
      w_doctype   like tsp01-rqdoctype,
      w_bytecount type i.
data: itab_pdf    like tline occurs 0 with header line.
parameter spoolnum like tsp01-rqident obligatory.
selection-screen begin of block a2 with frame.
parameters: to_pc   radiobutton group a2 default 'X',
             pcfile like rlgrap-filename lower case,
             to_unix radiobutton group a2,
             unixfile(255) lower case.
selection-screen end of block a2.
at selection-screen on block a2.
if to_pc = 'X' and pcfile is initial.
    message e398(00) with 'Enter PC File Name.'.
elseif to_unix = 'X' and unixfile is initial.
    message e398(00) with 'Enter Unix File Name.'.
endif.
at selection-screen on spoolnum.
select single rqident rqdoctype
         into (w_ident, w_doctype)
         from tsp01
         where rqident = spoolnum.
if sy-subrc ne 0.
    message e398(00) with 'Spool' spoolnum 'not found'.
endif.
at selection-screen on value-request for pcfile.
call function 'WS_FILENAME_GET'
       exporting
            mask     = ',.,..'
       importing
            filename = pcfile
       exceptions
            others   = 1.
if sy-subrc <> 0.
    message id sy-msgid type 'I' number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
start-of-selection.
if w_doctype = 'LIST'.
    perform get_abap_spool_in_pdf.
elseif w_doctype = 'OTF'.
    perform get_otf_spool_in_pdf.
endif.
if to_pc = 'X'.
    perform write_pdf_spool_to_pc.
else.
    perform write_pdf_spool_to_unix.
endif.
message i398(00) with 'Completed OK'.
form get_abap_spool_in_pdf.
refresh itab_pdf.
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
       exporting
            src_spoolid              = w_ident
       importing
            pdf_bytecount            = w_bytecount
       tables
            pdf                      = itab_pdf
       exceptions
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            others                   = 12.
if sy-subrc ne 0.
message e398(00) with 'Cannot convert to PDF. Error =' sy-subrc.
endif.
endform.
*********************************************************form get_otf_spool_in_pdf.
refresh itab_pdf.
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
       exporting
            src_spoolid              = w_ident
       importing
            pdf_bytecount            = w_bytecount
       tables
            pdf                      = itab_pdf
       exceptions
            err_no_otf_spooljob      = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_dstdevice        = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            others                   = 12.
if sy-subrc <> 0.
message e398(00) with 'Cannot convert to PDF. Error =' sy-subrc.
endif.
endform.
*********************************************************form write_pdf_spool_to_unix.
open dataset unixfile for output in binary mode.
if sy-subrc ne 0 .
    message e398(00) with 'Cannot open unix file for output:' unixfile.
endif.
loop at itab_pdf.
    transfer itab_pdf to unixfile.
    if sy-subrc ne 0 .
      message e398(00) with 'Cannot write to unix file:' unixfile.
    endif.
endloop.
close dataset unixfile.
endform.
*********************************************************form write_pdf_spool_to_pc.
call function 'WS_DOWNLOAD'
       exporting
            bin_filesize            = w_bytecount
            filename                = pcfile
            filetype                = 'BIN'
       tables
            data_tab                = itab_pdf
       exceptions
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            others                  = 10.
if sy-subrc <> 0.
message e398(00) with 'Cannot download to PC. Error =' sy-subrc.
endif.
endform.
Hope this will help you.
Cheers
Sunny
Rewrd points, if found helpful

How to find 11i and r12 applications characterset

Hi,
How to find 11i and r12 applications characterset not of database only applications,What is IANA characterset asked in rapid install?How to find IANA character set in 11i and r12
Regards

Hi,
How to find 11i and r12 applications characterset not of database only applicationsAs applmgr user, source the application env file and issue "echo $NLS_LANG".
You can also get it from the application context file (search for <NLS_LANG oa_var="s_nlslang">).
What is IANA characterset asked in rapid install?How to find IANA character set in 11i and r12This is documented in the installation manual.
The IANA (Internet Assigned Numbers Authority) character set is the Internet-assigned standard character set name used by the Web server. See http://www.iana.org/assignments/character-sets for more information.
Regards,
Hussein

How to upload a file in application server to an internal table

Hi,
      I am asked to upload a file from application server to internal table. Can you please suggest me the ways to do it or the function module which helps to browse the application server file names.
I have done a program. But its giving problem in searching the files from application server. I am pasting my code for ur review. Please tell me which part i have to correct or suggest me some other ways to do it.
*& Report ZUPLOAD1
REPORT ZUPLOAD1.
type-pools: truxs.
parameters: p_upl_ps radiobutton group g1 default 'X', "upload from pres. server
             p_path type rlgrap-filename,
             p_upl_as radiobutton group g1,   "upload from appln server
             <b>p_dir LIKE filepath-pathintern DEFAULT 'Y_ABAP',
             p_file LIKE filepath-pathintern lower case,</b>
             p_test as checkbox.
constants: c_x value 'X',
           c_tab type c value cl_abap_char_utilities=>horizontal_tab.
types: ty_data(1000) type c.    "structure to hold legacy data
data: i_data type standard table of ty_data. "internal table of ty_data
types: begin of stritab,
      land1 type v_t604-land1, "structure of legacy file.
      stawn type v_t604-stawn,
      bemeh type v_t604-bemeh,
      impma type v_t604-impma,
      minol type v_t604-minol,
      end of stritab.
data: gi_itab type standard table of stritab, "internal table of legacy file
      gw_itab type stritab. "work area
data: i_raw type truxs_t_text_data,
      v_fullpath type string.
at selection-screen on value-request for p_path.
if p_upl_ps = c_x. "if presentation server is selected
perform get_file.
else.            "if application server is selected
perform set_file_path.
perform upload_from_server.
perform split_data.
endif.
form get_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
IMPORTING
   FILE_NAME           = p_path.     "getting the file name of pres server
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR          =
    I_LINE_HEADER              = 'X'              "converting excel to sap and filling in
    I_TAB_RAW_DATA             = i_raw      "internal table
    I_FILENAME                 = p_path
TABLES
    I_TAB_CONVERTED_DATA       = gi_itab
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
form set_file_path.                 "Getting the file path of application server
data: lv_file type p_file.
      lv_file = p_file.
      CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
        EXPORTING
        CLIENT                           = SY-MANDT
          LOGICAL_PATH                     = p_dir
        OPERATING_SYSTEM                 = SY-OPSYS
        PARAMETER_1                      = ' '
        PARAMETER_2                      = ' '
        PARAMETER_3                      = ' '
        USE_BUFFER                       = ' '
          FILE_NAME                        = lv_file
        USE_PRESENTATION_SERVER          = ' '
        ELEMINATE_BLANKS                 = 'X'
       IMPORTING
         FILE_NAME_WITH_PATH              = v_fullpath
       EXCEPTIONS
         PATH_NOT_FOUND                   = 1
         MISSING_PARAMETER                = 2
         OPERATING_SYSTEM_NOT_FOUND       = 3
         FILE_SYSTEM_NOT_FOUND            = 4
         OTHERS                           = 5
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
endform.
form upload_from_server.
data: lv_msg type string,
      lw_data type ty_data.
open dataset v_fullpath for input message lv_msg in text mode encoding default.
if sy-subrc <> 0.
message lv_msg type 'i'.
stop.
endif.
do.
read dataset v_fullpath into lw_data.
if sy-subrc <> 0.
write:/5 'Error in processign data set'.
exit.
endif.
append lw_data to i_data.
enddo.
close dataset v_fullpath.
if sy-subrc <> 0.
write: /5 'Error closing dataset'.
endif.
endform.
form split_data.
data: lw_data type ty_data.
data: lw_itab type stritab.
data: begin of ty_itab,
      land1 type v_t604-land1,
      stawn type v_t604-stawn,
      bemeh type v_t604-bemeh,
      impma type v_t604-impma,
      minol type v_t604-minol,
      end of ty_itab.
loop at i_data into lw_data.
split lw_data at c_tab into
      ty_itab-land1
      ty_itab-stawn
      ty_itab-bemeh
      ty_itab-impma
      ty_itab-minol.
lw_itab-land1 = ty_itab-land1.
lw_itab-stawn = ty_itab-stawn.
lw_itab-bemeh = ty_itab-bemeh.
lw_itab-impma = ty_itab-impma.
lw_itab-minol = ty_itab-minol.
append lw_itab to gi_itab.
endloop.
endform.
start-of-selection.
loop at gi_itab into gw_itab.
write: /5 'COUNTRY', 'IMPORT CODE', 'SUP UNIT', 'FIRST UOM', 'SECOND UOM',
       /5 gw_itab-land1, gw_itab-stawn,gw_itab-bemeh,gw_itab-impma,gw_itab-minol.
endloop.
end-of-selection.
I hope problem must be in p_dir and p_file which are in bold.. Kindly help me out. Thanks in advance.

see the following ex:
*&      Form SUB_GET_FILEPATH
      text
--> p1        text
<-- p2        text
FORM SUB_GET_FILEPATH .
    GFILE = 'D:\SAP_INT\INBOUND\INBOX'. "Path
ENDFORM.                    " SUB_GET_FILEPATH
*&      Form SUB_GET_FILE
      text
--> p1        text
<-- p2        text
FORM SUB_GET_FILE .
DATA: P_FDIR(200) TYPE C.
DATA: IT_FILEDIR1 TYPE STANDARD TABLE OF TY_FILEDIR WITH HEADER LINE.
P_FDIR = GFILE.
CALL FUNCTION 'RZL_READ_DIR_LOCAL'
    EXPORTING
      NAME     = P_FDIR
    TABLES
      FILE_TBL = IT_FILEDIR.
REFRESH : IT_FILEDIR1.
LOOP AT IT_FILEDIR.
    IF IT_FILEDIR-NAME(4) = 'ZINC' OR IT_FILEDIR-NAME(4) = 'zinc'.
      MOVE IT_FILEDIR-NAME TO IT_FILEDIR1-NAME.
      APPEND IT_FILEDIR1.
    ENDIF.
ENDLOOP.
IF IT_FILEDIR1[] IS INITIAL.
    STOP.
ENDIF.
LOOP AT IT_FILEDIR1.
    REFRESH: I_TAB.
    CLEAR: I_TAB.
    NAME = IT_FILEDIR1-NAME.
    CONCATENATE: GFILE '\' NAME INTO G_FILE.
    OPEN DATASET G_FILE FOR INPUT IN TEXT MODE
                                     ENCODING DEFAULT
                                     IGNORING CONVERSION ERRORS.
    IF SY-SUBRC EQ 0.
      CONCATENATE 'FILENAME : ' G_FILE INTO I_MSG1.
      APPEND I_MSG1.
      DO.
        READ DATASET G_FILE INTO RECORD.
        IF SY-SUBRC = 0.
          SPLIT RECORD AT ',' INTO I_TAB-BUKRS I_TAB-EBELN
              I_TAB-BLDAT I_TAB-XBLNR I_TAB-LIFNR I_TAB-AMOUNT
              I_TAB-CURR I_TAB-BUSAREA
              I_TAB-BKTXT I_TAB-DMBTR I_TAB-MENGE I_TAB-SRNO.
          MOVE-CORRESPONDING I_TAB TO I_TAB1.
        ELSE.
          EXIT.
        ENDIF.
        APPEND I_TAB1.
        CLEAR: I_TAB, I_TAB1.
      ENDDO.
    ENDIF.
    CLOSE DATASET G_FILE.

How to delete a file from application server?

Hi gurus,
i want delete a file from application server . can any one tell me the BAPI/Fm .
thanks in advance

See the replies of the thread;
How to delete File from the Application Server,ABAP
But i can smell something fishy in both The specified item was not found. and The specified item was not found. style of posting questions. Also both of you have similar questions in your profile....
Hmmm, Mods have to take care of the Rest...
Regards
Karthik D

How deploy 6i Forms Fmx trought Application Server 10g

Hello every one,
Situation :
In my company, we have a software developed by a team using Oracle Forms 6i, the application is connected te Oracle 9i Database and every thing works well.
Problem :
I was able to upgrade the database from 9i to 10g. But my question : is it possible to deploy all the Forms (fmx 6i version) on Application Server 10g. I want to use the 3-tiers architecture.
Take note that i have not the fmb source files. Just the FMX (about 40 files)
If yes, can you explain also how to proceed (tools to install on Application Server) and how to setup the connection between the 3 tiers throught a LOCAL NETWORK.
Regards
Kira

You will at least need to recompile all those *.fmb to *.fmx in the version of the App server you will be using.
We have a forms6 c/s application we are migrating to forms 11g and it almost that easy (except for changes in how you launch reports).
The application server is setup alot like the client/server side of forms is, it needs a tnsnames.ora that points to the database and it needs to know where you will be storing the forms and report. Looks for any *.fmx and that will be the default location.

How to find a path in Application server?

Similar Messages

Maybe you are looking for