How to find a proper host for my audio and video for podcasts?

how do i find a proper audio/video host that can work with
the feed for podcasts?

This is help you ? http://dfcb.github.com/BigVideo.js/ I like to Know too but i dont nothing about code.

Similar Messages

Finder crashes with "open as" on audio and video files

My system was restored by Time Machine some time ago.
Since than my Finder crashes whenever i use the "open as" menu on movie or audio files.
I do a ctrl-click and choose "open as" nothing happens like a freeze and than the Finder crashes and starts new. Sometimes the Finder doesn't even appear again, so that i have to use the power button of my MBP to switch it off.
Other file types like jpg, pdf, ... work just fine.
I'm using a MBP, Intel Core Duo 2Ghz with 2 Gb Ram under 10.6.4.
I repaired permissions and even rebuild the launch services but it didn't help.

Hello s:
The only thing I can think of to try is to trash a preference file (com.apple.finder.plist) and restart.
If that does not help, I would reinstall OS X 10.6 (over your existing system and then run software update.
Barry

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

This functionality is not available in LabVIEW RT. If you attempt to switch execution target to an RT controller already targetted by someone else, it will tell you too many hosts are connected and fail. Of course if it allows you to switch, then no one was connected. By attempting to switch execution target you can use the message above to determine if anyone is targetted or not, but if someone is, there is no way to determine who.
If you are concerned about this sort of thing, you might check the RT target options in LabVIEW RT to change the IP access list for hosts that are allowed to switch execution target to it.

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

How to find out the Tcodes for the exits

Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
                          EXIT_RFEKA400_001
                          EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
                   USEREXIT_FIELD_MODIFICATION
                   USEREXIT_MOVE_FIELD_TO_VBAK
                   USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
          HISTORICAL_VALUES
          MD_ADD_ELEMENTS
          MD_CHANGE_MRP_DATA
          MD_PIR_FLEX_CONS
          MD_PLDORD_POST
          ME_REQ_POSTED
          NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

i have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong!

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to find out the description for the given field?

Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...

Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri...

URGENT: How to find out the Tables for Routines in BW.

Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.

Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen.

How to find out the link for the tables for sub contract PO

Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.

Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK.

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to determine the proper size for Oracle 8i Data Base Objects

Hi,
I'm working on an Oracle 8i Data base. I'd like to know how to determine the proper size for the Data Base objects such as tables, datafiles, tablespaces...
Thanks.

Start with the docs.
http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/schema.htm#949
Best Regards
Krystian Zieja / mob

How to find the workflow admins for all costcenters ?

Dear SRM gurus
We are using Classic scenario with N th step workflow with BADI.
we have a requirement.
How to find the workflow admins for the particular costcenters.
we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
Is there anyway to find all the admins for a cost center(users are more than 7000+)
can anybody send work flow related presentations or cookbook
Thanks in Advance.
srinu

hi
I have not received any thing.Please send again
[email protected]
[email protected]

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

How to find the search help for the parameters stmt in a report

hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statement

I am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful.

How to find the creation date for a released requests..

Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..

hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod

How to find a proper host for my audio and video for podcasts?

Similar Messages

Maybe you are looking for