How to find active master data source in the bw system
Hi
Can anyone guide me how to find the active master data source in the bw system
Hi,
You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
Assign points if helpful
Regards.
Similar Messages
-
How to find out which data control do the page layout components come from?
hi,
work in Jdev 11.1.2.3
After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
--i cannot find data control related information in the property pallete for the page layout component.
Regards.This information can be found in the page definition file.
Select the field in the page and then click the binding tab. -
How to find list of languages installed in the SAP system?
Hi All,
Please tell me, how to find list of languages installed in the SAP system?
Thanks and Regards,
Kumar.Hi Virgo Rhyme
Hope the following info will be helpful
3rd - SAP is the 3rd largest software company in the world
30,000 - Total number of people employed by SAP
5,400 - Number of programmers employed by SAP
$7.024 billion - FY03 Revenue
$1.077 million - FY03 Net Income
12,000 - Number of companies using SAP
79,800 - Number of SAP installations
12,000,000 - Number of people using SAP
120,000,000 - Total number of people in the 12,000 companies who are using SAP
28 - Number of languages supported by SAP
46 - Number of country-specific versions of SAP
22 - Number of industry-specific versions of SAP
1,000 - Number of pre-defined best practices contained in the SAP system
10,000 - Number of tables requiring configuration in a full SAP implementation
55,000 - Number of SAP experienced consultants worldwide
28 - Number of years ago SAP was started
Reward if helpful
Regards
Lakshman -
Hello
I have PP cube in which data is not loaded but it is activated now if I want to know the master data used by this infocube how can I find which master data this infocube is using.
As I have to load this infocube.
due points will be assigned to right answers
Regards
KrishThanks Bhanu and Kamal,
I have assigned the points.
Any other suggestions/ comments are welcome
Krish
Message was edited by: krish kumar -
InfoSpoke as Data Source in the same system
Hello Expert,
I try to include the result of infospoke as transparent table (the source of infospoke is a basic cube), this table I need to include as DataSource for using into other cube into the same system.
The transparent table is generated succesfully, but when I try to generate generic data source (SAVE), the system indicate a message:
Invalid extract structure template /BIC/OHZRD_MMC_S of data source [name datasource].
So it is very urgent and importat because it is part of a possible solution if anybody could help me in this hole or if exist other solution to my problem, please tell me.
Thanks in advanced.Hello,
I have not tried this method, as i will suggest the use of export data source , rather than extracting to a table and then loading to other data target.
Now you are taking a long routelike: Cube-> open hub->table->datasource->data target
if you use an export data source: Cube-> export datasource-> data target
now, the scenario cant avoid such modeling of infospoke , then the option is to create a view bsed on the generated table and create the datasource on top of the view.
Happy Tony -
How to find unassigned master data text objects in process chain in bi
Hi
Please let me know how to find the unassigned master data text objects in process chain.hi,
actually if u want to find that , is ur Unassigned Infoobject in present in process chain or not, , that u can find out just by right
click on your DTP (master data Txt datasource--> Master data text ), if this is present in Process chain, then on ryt click, the process chain option will be active. by clicking over that u can find the name in which this exists.
thanks. -
How to find the size of the master data objects in the BW system?
Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AMHi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal -
Identifing duplicate master data records using the MDM Import Manager
hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
a.[Remote Key] : Checks the current source rec with
repository along with all the fields - This is
default
b.Remove [Remote key] - by double click the same; and
choose any single fields like Vendor Number or
name - Then the current record will be matched
with the repository based on the field.
c.Instead of single field you can choose combination
also.
3. Based on the Match results, match class will be set
automatically;
a. None
b. Single
c. Multiple
4. Then Match Type
a.Exact-All the individual value matches are Equal.
b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points. -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to trace master data source (table-field)?
Hello All,
Please help, its Urgent!!
I have the following 4 characteristic requirement in BW from PM/PS module.
Master data source (format: table-field)
AFVV-FSAVD - early start date
AFVV-FSEDD - early finish date
AFVV-SSAVD - late start date
AFVV-SSEDD - late finish date
can anyone tell me the procedure, how to find them in R/3 n if there r any standard business content for the same?
Thanks in advance,
JPGo to RSA5 Tcode in R/3, under SAP R/3 Application component, you can get PO/PS Components, and under that you can get PO-IO/PS-IO Components, here you can check all the vaialble master data datasources.
KJ!!! -
Master Data source for sales district or Region in CRM
Dear All,
Please let me know the Master Data source for sales district or Region in CRM.
Thanks
Regards,
SaiHi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx -
Enhancing master data source.
Hi experts,
How to enhance an master data data source ( 0customer_attr ). Which function exit we need to use.
Is it EXIT_SAPLRSAP_001 or EXIT_SAPLRSAP_002 ?
Regards,
Nishuv.hi fallow these steps
1. Go To SAP R/3 TCODE-RSA6
2. Open the SAP R/3 Tab & select the module & the masterdata extractor name for ex.MM -> MM-IO ->0VENDOR_ATTR
3. Double click on it. It will show you the extract structure name under "ExtractStru" as BIW_LFA1_S.
4. Double click on it or copy the name & open SE11 & paste the name open the structure.
5. There you can find append structure field name in ZZ. i.e all append structure fields should start with ZZ as prefix.
6. To find the source field you have to go to CMOD.
7. Provide the project name which is created.
8. Then select the "Enhancement components" option.
9. Click on display button.
10. Select the function exits "Exit_SAPLRSAP_002" it will open the include program "include zxrsau02".
11. Double click on "zxrsau02".
12.You will find the case program with datasource name.
13.Choose your master datasource & check the table names & the logic. -
How can i lookup a data source v5 in WSAD 5.1?
Hi all,
I'm using WSAD 5.1 to developer a web application based on J2EE 1.3 that have a simple java classes. My application uses a data source version 5 to have access the database. I?m using service locator pattern to lookup a JNDI but it dont work properly on stand alone java classes, only on EJB components.
How can i lookup a data source version 5 from my java class on WSAD 5.1?
Can anyone help?
Thanks,Oh I did not realize that you were talking about a stand-alone application. You cannot use the server datasources in your stand-alone application.
You can use the Oracle helper classes to construct a DataSource on the client side.
http://java.sun.com/j2se/1.4.2/docs/api/javax/sql/DataSource.html and driver specific documentation to achieve this. I will try to send a few links, if I find any.
In a stand-alone application, you can use some connection pooling mechanism on your own.
The ideal thing to do is to keep your data access in your middle tier (EJBs) and call the EJB's. This way you can reuse things in multiple client tiers and use the container provided datasource and connection pooling mechanisms.
Hope this helps.
Vijay -
How to start with Master data management
Hi All,
I want to start with Master Data Management. Can any one provide me proper material to get the knowledge on Master Data Management Integration. And What is the relationship between XI.and for starting MDM what all settings i have to do???
Its really urget plz help me out.
Thanks,
Seema Khandelwal
Message was edited by:
Seema khandelwalHi ..
look at this documents
/people/andreas.seifried/blog/2007/08/30/how-to-use-the-test-environment-of-the-mdm-enrichment-controller
/people/harrison.holland5/blog/2006/11/27/mdm-syndication
/people/harrison.holland5/blog/2007/01/22/testing-and-monitoring-an-interface-between-mdm-xi
see this Wiki to find all the documentation on MDM:
https://wiki.sdn.sap.com/wiki/display/HOME/MasterDataManagement
Here, for the components you need to install:
https://wiki.sdn.sap.com/wiki/display/HOME/MasterDataManagement+Components
Others smart links are here:
- sdn e-learning.
https://www.sdn.sap.com/irj/sdn/mdm-elearning
http://service.sap.com/installMDM for a
you can use expression editor to do that:
have a look at this guide on how dates can be calculated there
with your field it can be very similar:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b025fab3-b3e9-2910-d999-a27b7a075a16
for more details about expression editor:
Calculation Fields chapter
https://websmp108.sap-ag.de/~sapidb/011000358700006291622006E
MDM 5.5 SP05 - ABAP API
https://websmp101.sap-ag.de/~sapidb/011000358700000271902007E
MDM 5.5 SP05 - ABAP API How To Guides (ZIP File)
https://websmp101.sap-ag.de/~sapidb/011000358700000271912007E
How to Identify Identical Master Data Records Using SAP MDM 5.5 ABAP APIs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e060251e-b58d-2910-02a2-c9a1d60d9116 -
How to connect to different data sources in XI 3.1 UNIVERSE?
hi experts,
We are going to migrate from BO 6.5 to BO XI3.1.
and we have different data sources to extract and generate the reports using various tools like Webi,Crystal Reports, Deski etc.
1 How to connect to different data sources like SAP BI query, DB2, Oracle etc,, provide me the step by step solution.
2 We need to migrate the universes and reports from BO 6.5 to BO XI 3.1 using the Report Conversion Tool.
can we directly convert from the deski reports to Webi or do we need to migrate first through Import Wizard?
3 Scheduling the Reports through Infoview
4 Various issues and how to resolve those issues, we generally face while scheduling, and while creating the queries like for example time out errors etc..
5 BO Security
6 Universe creation with best practices and the loops,contexts,aliases etc..
please provide me the step by step solution documents and links.
thans in advance
venuscmI would recommend to take a look at the official documentation. YOu can find this here
http://help.sap.com
NAvugate to SAP BusinessObjects->All products and the select the product you want eg. BusinessObjects ENterprise or Universe designer and the appropriate version XI 3.1. Take a look at the admin and the user guides.
Currently the Data FEderator will allow you to buid a universe that access data from various data sources. Another option is to merge queries from different universes at report level.
Regards,
Stratos
Maybe you are looking for
-
I cant put pdfs or music on my itouch,it wont sync.the message i get when itunes comes up is "iTunes was unable to load data class information from sync services.reconnect or try again later." and its just my itouch i tried another one and was able t
-
What is a diference between Apple TV and Elegato
Does ATV work without comp on and no wifi router on?
-
Dear Experts, I have ECC PO and as of now user creates manual sales order in other R/3 4.7 which is time consuming, less accurate and erroneous process. I got to know something on ALE configuration where user creates PO in ECC, automatically SO creat
-
Canon 5d3 turns into deathbed wishlist
I'm really blown away that the extremely heartfelt post i wrote last night was deleted by some bleeping moderator. Typing in forum rules in the search box gives nothing in reply about whether or not you can put in that you're selling your gear and i
-
Documentation on shownone in jbo:InputSelect
I'm using Oracle JDeveloper 9.0.3 and the documentation does not seem to include "shownone" for the jbo:InputSelect tag. I want to use "shownone" to provide a default selection like "please make a selection" or something. Here is the code: <jbo:Input