How to find all Open POs and PO status

Hi,
1. If I open any PO (we are on ECC6.0), on the PO header status Tab, we can see the status as "Fully Invoiced or Partially Invoiced or Not Invoiced" and similarly for delivery too. Is there any table to see get these statuses directly for any given PO?If no, How do I determine the status manually in the report ?
2. If you get into a PO, follow the menu path Environment-->AC Commitments docs. Choose Funds Management from the Pop-up. This shall generate a report for the document Jounal entries and display the final amounts (final bdgt) there. Is there any table where I can get this amounts for a given PO?
I want to generate a report for all the Open POs based on the different statuses from point 1 and also where its AC Commitments-FM docs amount is not equal to 0.
I checked with my MM consultant for this and he couldnt be of help.
Thanks
Kiran

>
kiran dasari wrote:
> But how can I figure out from EKBE or PO history?
>
> Do I need to compare the quantities from PO & invoices? If yes, what is the case, if there are multiple accounts for a same line item?...will calculation not be very tedious?
>
> Is there any direct shot I can hit to get the status for a given PO and given line item which says....Full Invoiced or Partially Invoiced or Not invoiced and similarly where do I go for delivery statuses?
>
> Thanks
> Kiran
Yes - it is tedious, but that is what we are paid for. You have to look at each line in the PO history table (EKBE), add up the invoices, subtract the returns. There are also some flags mentioned by other posters to determine whether the PO (or PO item) is complete.
Rob

Similar Messages

How to find all open POs and there SUM

How to find all open POs and there SUM
Please help.
Thanks,
vihar9

Have you tried looking at the tables, standard reports, or the PO display transaction? Have you asked your functional analyst or development team lead? This is not a forum to post a requirement and get your job done for you...

How to find out open POs

Dear All,
Can anybody tell me how can I find out all the open POs. Then I need to find out ED rate in each PO. Is there any standard report or if any body can tell different tables so I can pass the records.
Suggestions will be highly adored.
Regards
Rutabhadra Panda

hi,
Check Table J_1IEXCDTL (Excise invoice line item details) ...Choose parameters like Plant,Vendor,material number and it will give BED % (BEDRATE),Additional Excise Duty % (AEDRATE)
Special Excise Duty %(SEDRATE).
other relevent tables ,may be useful
J_1IEXCHDR
J_1IEXCTAX
J_1ICONDTAX
Regards,
Vineet

Find all open windows and close them

Hi,
I'm writing an application that creates a new thread. This thread loads an other application from the filesystem and invokes the main method.
When the thread loads an application that opens a frame, my application can stop the thread, but the frame stays open.
Is there a way that my application can detect if the thread has opened a frame and if there are opened frames that it can close them?

Well, tht's an idea, but my problem is, that my thread can start any aplication by invoking it's main-method.
That means that even my Thread doesn't know which and how many frames it has opened or at least I don't know how I could get a list of all openened frames :-(
A little bit code:
/*Class classToRun is given to the Thread at it's initalisation and already loaded
by a custom ClassLoader, that loads any .class file from a given location*/
classToRun.getMethod("main", new Class[]{String[].class}).invoke(null, new String[]);

How to find all open connections details...!

Hi,
Is there a way to find the details of all the open connections. We are actually having 300+ connections established in our server, which we guess would be a cause for slow performance. And we are running on JDK 1.3 version.
Any help/hint would help.
Thanks
SAM

Is there a way to find the details of all the open
connections.
We are actually having 300+ connections
established in our server, which we guess would be a
cause for slow performance. I certainly think that it cant be 300+ concurrent connections. Ideally connections are pooled so the app server would reuse the connection from the pool. However if care is not taken to close the connection in finally block then it may cause connection leaks !
Check the application server log for leaks.
Slow performance is not necessarily caused due to too many connections. You can optimize it by adding appropriate indexes, making the joins to tables so that it uses the index.
In case you use log4j then set the debug level to INFO in log4j.xml.
Too many debug statements causes a lot of I/O operations. Plus there are many more reasons. So try to investigate on these lines.
Cheers
-Rohit

How to find the Service order and its status..

Hello,
How see the status of the service order...
i have to search for all the service orders where all of them completed once....
which tables, fields are useful.
Please help to solve this issue.
thanks for yoru cooperation

Hello Gun,
How to see the status desciption for example
I1005
I1004
I1002...etc
waht I1005 means. I have to display status of each service order in the list , here i can not display I1005 is the status, instad i have to diplay I1005's desciption.

How to get all open sales orders of a customer and also account group

I want to know the logic to find all open sales orders of a customer and also account group

Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven

When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! No Finder window opens up and the spotlight dropdown menu just shuts! Please help!

When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! NO Finder window opens up and the spotlight dropdown menu just shuts! Please help!

I'm having the same problem in other places as well, for example when i downloaded Easyfind right now, clicking the small magnifying glass button on the right of the file name (shown below) would usually open up finder highlighting the file, but now nothing happens when i click on that button!
Is there a solution for this, as this was a very useful feature which i used ALL the time?

HT201210 My contact number all gone went i doing update 5.1.1 so how to find my contact back and sync into iphone

My contact number all gone went i doing update 5.1.1 so how to find my contact back and sync back into iphone.
help......help
my contact number over 500ppl

What are you keeping your calendar in on your PC? Outlook?

How to find all Badis and Exits for WS14000145

Hi all:
Could you please tell me how to get all the badis and exits for workflow WS14000145 ?
Thank you very much!!!

Hello,
The main BADI corresponding to this workflow (N-step PO BDI workflow) is BBP_WFL_APPROV_BADI.
Other BADI's whcih might be interesting to you are:
BBP_WFL_SECUR_BADI --> to control the security level
BBP_CHNG_AGNT_ALLOW --> To allow/disallow adding/changnig approvers
BBP_CHNG_AGNT_GET --> Restrict the additional approvers to per-defined list
Rgds,
Prasanna

How to save all open document in png 24 by javacsript

how to save all open document in png 24 by javacsript

yeah, i can definitely see how it would be useful for some
people! and
hey, for all i know, i'm the one who's not an average user. i
was
pretty much just saying that i can see how that's something
Firefox
would think to do, but not necessarily a program like
Dreamweaver. but i
agree that it would be a useful feature in lots of programs.
and i think
that what Murray suggested is probably pretty close to what
you're
looking for, if not exactly.
d_macman wrote:
> To respond to both...
>
> courtney (n h c)... I must not be the average user then.
We have many sites,
> and I do a LOT of development, and many times, I may
have several pages with
> several includes on a page. IE, for a form page, I may
have 10-12 pages total
> (including headers, footers, java, PHP process pages,
etc) and to work out the
> processes and for development, I may create several
versions depending on the
> problems I run into.So to not go nuts, I would LOVE to
save the batch of pages
> out, and then be able to re-open them all at once.
Making it easy to jump in an
> out of a test section (I have them saved in a site, and
dont want to make
> second sites just for this purpose).
>
> Not to mention, leaving work and coming back in and
finding out the power went
> out over the weekend and my machine shutdown (and yes, I
have a UPS, but it
> wont run the system for that long).
>
> So, you see why I would like to save them as batch, like
Firefox, way easier.
>
> Murray *ACE* ...
>
> I will try that, I did not even know that was there. Way
cool ! I hope it
> works, especially for power outages, like I mentioned
above!
>
> Thanks all,
>
> Don
>
>

Reset all settings. how to recover all the bookmarks and add?

Please, help.
At one point, without my knowledge, reset all settings. How to restore all the tabs and add? It is very important to me! How could this happen and why? I did not do anything.

If you have you have reset Firefox then a new profile is created and some personal data (bookmarks, history, cookies, passwords, form data) is automatically imported and the current profile folder will be moved to the desktop to an "Old Firefox Data" folder.<br />
Installed extensions and other customizations (toolbars, prefs) that you have made are lost and need to be redone.
If you otherwise created a new profile then check if there are still other profiles present
You can use this button to go to the current Firefox profile folder and go back one level to go to the Firefox/Profiles/ folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
* /Users/<user>/Library/Application Support/Firefox/Profiles/<profile>/
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
If you use the Time Machine then you can try to recover files there and copy them to the current profile folder.
*http://www.apple.com/support/timemachine/

How to find invoice open item

how to find invoice open item.

Hi,
You can get the open items from BSIS.
To get the details of open items you need to do as below :
1. Get all the document numbers from BSIS table based on year(GJAHR) and period (MONAT).
2. Once you get all the open items from BSIS, go to BSAS with the document number retreived from BSIS.
Now you will have two internal tables, one with open items and one with closed items. Now you need to segregate the open items and closed items from BSIS.
loop at it_bsis.
read table it_bsas with key bukrs = it_bsis-bukrs
                                        hkont = it_bsis-hkont
                                        gjhar = it_bsis-gjahr
                                        monat = it_bsis-monat.
if sy-subrc eq 0.
    delete it_bsis.
    clear it_bsis.
endif.
endloop.
Now you are left with only open item only.
Thanks,
Sriram Ponna.

Muse Accordion widgit, I need to know how I find the (Open Closed ) link it seems to have vanished

Muse Accordion widgit, I need to know how I find the (Open Closed ) link it seems to have vanished all I can find is ( Expand behavior and Overlap Items Below.)

If I got your query right, do you mean you don't have all the options in the Accordion Options panel as pictured below?
If the above is true, can you try re-inserting the Accordion panel and check if the options then become available for you. Also, please check if you're running the latest version of Muse i.e. 4.1.8 as on today.
If the problem persists, please try creating a new Muse project and see if you are able to replicate the behaviour on a fresh Muse site as well.
Thanks,
Vinayak

How to find the open PR in SAP

how to find the open PR list in SAP

HI,
Using T-code ME5A - List Display of Purchase Requisitions and give input data's are as follows.
Plant                : _______
Scope of List : ALV
Tick Mark of the below options :
       Assign Purchase Requisition to be tick
       "Partial Ordered" Requisitions to be tick
        Released Requisitions Only to be tick
        Requisition for overall Release to be tick
After that, execute the report shown only released and Open purchase requisition(PR) details.
Hope, it is useful for you.
Regards,
K.Rajendran

How to find all Open POs and PO status

Similar Messages

Maybe you are looking for