How to find all open POs and there SUM
How to find all open POs and there SUM
Please help.
Thanks,
vihar9
Have you tried looking at the tables, standard reports, or the PO display transaction? Have you asked your functional analyst or development team lead? This is not a forum to post a requirement and get your job done for you...
Similar Messages
-
How to find all Open POs and PO status
Hi,
1. If I open any PO (we are on ECC6.0), on the PO header status Tab, we can see the status as "Fully Invoiced or Partially Invoiced or Not Invoiced" and similarly for delivery too. Is there any table to see get these statuses directly for any given PO?If no, How do I determine the status manually in the report ?
2. If you get into a PO, follow the menu path Environment-->AC Commitments docs. Choose Funds Management from the Pop-up. This shall generate a report for the document Jounal entries and display the final amounts (final bdgt) there. Is there any table where I can get this amounts for a given PO?
I want to generate a report for all the Open POs based on the different statuses from point 1 and also where its AC Commitments-FM docs amount is not equal to 0.
I checked with my MM consultant for this and he couldnt be of help.
Thanks
Kiran>
kiran dasari wrote:
> But how can I figure out from EKBE or PO history?
>
> Do I need to compare the quantities from PO & invoices? If yes, what is the case, if there are multiple accounts for a same line item?...will calculation not be very tedious?
>
> Is there any direct shot I can hit to get the status for a given PO and given line item which says....Full Invoiced or Partially Invoiced or Not invoiced and similarly where do I go for delivery statuses?
>
> Thanks
> Kiran
Yes - it is tedious, but that is what we are paid for. You have to look at each line in the PO history table (EKBE), add up the invoices, subtract the returns. There are also some flags mentioned by other posters to determine whether the PO (or PO item) is complete.
Rob -
Dear All,
Can anybody tell me how can I find out all the open POs. Then I need to find out ED rate in each PO. Is there any standard report or if any body can tell different tables so I can pass the records.
Suggestions will be highly adored.
Regards
Rutabhadra Pandahi,
Check Table J_1IEXCDTL (Excise invoice line item details) ...Choose parameters like Plant,Vendor,material number and it will give BED % (BEDRATE),Additional Excise Duty % (AEDRATE)
Special Excise Duty %(SEDRATE).
other relevent tables ,may be useful
J_1IEXCHDR
J_1IEXCTAX
J_1ICONDTAX
Regards,
Vineet -
Find all open windows and close them
Hi,
I'm writing an application that creates a new thread. This thread loads an other application from the filesystem and invokes the main method.
When the thread loads an application that opens a frame, my application can stop the thread, but the frame stays open.
Is there a way that my application can detect if the thread has opened a frame and if there are opened frames that it can close them?Well, tht's an idea, but my problem is, that my thread can start any aplication by invoking it's main-method.
That means that even my Thread doesn't know which and how many frames it has opened or at least I don't know how I could get a list of all openened frames :-(
A little bit code:
/*Class classToRun is given to the Thread at it's initalisation and already loaded
by a custom ClassLoader, that loads any .class file from a given location*/
classToRun.getMethod("main", new Class[]{String[].class}).invoke(null, new String[]); -
How to find all open connections details...!
Hi,
Is there a way to find the details of all the open connections. We are actually having 300+ connections established in our server, which we guess would be a cause for slow performance. And we are running on JDK 1.3 version.
Any help/hint would help.
Thanks
SAMIs there a way to find the details of all the open
connections.
We are actually having 300+ connections
established in our server, which we guess would be a
cause for slow performance. I certainly think that it cant be 300+ concurrent connections. Ideally connections are pooled so the app server would reuse the connection from the pool. However if care is not taken to close the connection in finally block then it may cause connection leaks !
Check the application server log for leaks.
Slow performance is not necessarily caused due to too many connections. You can optimize it by adding appropriate indexes, making the joins to tables so that it uses the index.
In case you use log4j then set the debug level to INFO in log4j.xml.
Too many debug statements causes a lot of I/O operations. Plus there are many more reasons. So try to investigate on these lines.
Cheers
-Rohit -
When i click on 'Show all in Finder' after searching for anything on spotlight, NOTHING happens! NO Finder window opens up and the spotlight dropdown menu just shuts! Please help!
I'm having the same problem in other places as well, for example when i downloaded Easyfind right now, clicking the small magnifying glass button on the right of the file name (shown below) would usually open up finder highlighting the file, but now nothing happens when i click on that button!
Is there a solution for this, as this was a very useful feature which i used ALL the time? -
How to get all open sales orders of a customer and also account group
I want to know the logic to find all open sales orders of a customer and also account group
Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven -
I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.
bfun
What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
on the same computer when you are using a computer player independent of Premiere Elements?
What are the properties of these clips that worked before but do not know with regard to sound
For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
We will be watching for your follow up.
ATR -
hey plz help me out!! i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me
iSight troubleshooting
http://support.apple.com/kb/HT2090 -
My contact number all gone went i doing update 5.1.1 so how to find my contact back and sync back into iphone.
help......help
my contact number over 500pplWhat are you keeping your calendar in on your PC? Outlook?
-
How to find all Badis and Exits for WS14000145
Hi all:
Could you please tell me how to get all the badis and exits for workflow WS14000145 ?
Thank you very much!!!Hello,
The main BADI corresponding to this workflow (N-step PO BDI workflow) is BBP_WFL_APPROV_BADI.
Other BADI's whcih might be interesting to you are:
BBP_WFL_SECUR_BADI --> to control the security level
BBP_CHNG_AGNT_ALLOW --> To allow/disallow adding/changnig approvers
BBP_CHNG_AGNT_GET --> Restrict the additional approvers to per-defined list
Rgds,
Prasanna -
How to save all open document in png 24 by javacsript
how to save all open document in png 24 by javacsript
yeah, i can definitely see how it would be useful for some
people! and
hey, for all i know, i'm the one who's not an average user. i
was
pretty much just saying that i can see how that's something
Firefox
would think to do, but not necessarily a program like
Dreamweaver. but i
agree that it would be a useful feature in lots of programs.
and i think
that what Murray suggested is probably pretty close to what
you're
looking for, if not exactly.
d_macman wrote:
> To respond to both...
>
> courtney (n h c)... I must not be the average user then.
We have many sites,
> and I do a LOT of development, and many times, I may
have several pages with
> several includes on a page. IE, for a form page, I may
have 10-12 pages total
> (including headers, footers, java, PHP process pages,
etc) and to work out the
> processes and for development, I may create several
versions depending on the
> problems I run into.So to not go nuts, I would LOVE to
save the batch of pages
> out, and then be able to re-open them all at once.
Making it easy to jump in an
> out of a test section (I have them saved in a site, and
dont want to make
> second sites just for this purpose).
>
> Not to mention, leaving work and coming back in and
finding out the power went
> out over the weekend and my machine shutdown (and yes, I
have a UPS, but it
> wont run the system for that long).
>
> So, you see why I would like to save them as batch, like
Firefox, way easier.
>
> Murray *ACE* ...
>
> I will try that, I did not even know that was there. Way
cool ! I hope it
> works, especially for power outages, like I mentioned
above!
>
> Thanks all,
>
> Don
>
> -
Reset all settings. how to recover all the bookmarks and add?
Please, help.
At one point, without my knowledge, reset all settings. How to restore all the tabs and add? It is very important to me! How could this happen and why? I did not do anything.If you have you have reset Firefox then a new profile is created and some personal data (bookmarks, history, cookies, passwords, form data) is automatically imported and the current profile folder will be moved to the desktop to an "Old Firefox Data" folder.<br />
Installed extensions and other customizations (toolbars, prefs) that you have made are lost and need to be redone.
If you otherwise created a new profile then check if there are still other profiles present
You can use this button to go to the current Firefox profile folder and go back one level to go to the Firefox/Profiles/ folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
* /Users/<user>/Library/Application Support/Firefox/Profiles/<profile>/
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
If you use the Time Machine then you can try to recover files there and copy them to the current profile folder.
*http://www.apple.com/support/timemachine/ -
How to find all JMX ports on a server?
How to find all jmx ports on particular server (say localhost) on windows
I have multiple JVM's running on my local server, and there is extensive use of JXM mbeans by the applications running on each server. So I want to connect to all these JMX servers and to instrument the MBeans using Jconsole(Jconsole localhost:<port>). But I don't know the port numbers, and its not logged by the application.
How do I find all the ports jmx servers connected?
Note : In my case I can not instrument using the PID.
thanks,
bala KHi kajbj,
I tried stop/start the application, but couldn't find any difference in the netstat command. I know it should show the JMX port (I am able to see on a test application), but this application's JMX port usage is missing.
netstat -ano --> Do i need to use any other commands?
I just injected few lines of code ( to list the MBeanServers programatically), to this application (did some usual tweaks to let this code execute at some time) and its listing couple of MBeanServers and lot of MBeans.
MBeanServerFactory.findMBeanServer(null); and so on.....
Is there a way to get the port using the Management API's?
thanks,
bala K -
I had on my desk top PC (a vista OS) a version of FireFox that the book marks where listed in the book tool bar tab and the "book tool" was able to show all my favs and there was a scroll bar on the right side of the top right side. I would like very much to turn it on in the Laptop I just bought and am having a fit trying to figure out all the differences,.I very much like this function; however, I am now using win 7 which in and of itself is difficult to figure out troubles when they occur such as if the MSN Bing program opens a video window while I am playing, the media center will lock up, or if I am listening to BBradio.org and click on lestening to one of the pastors the laptop will show static on the screen and all you hear is static like you just went to the twilight zone.
== This happened ==
Not sure how often
== unpredictableTo attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html
Maybe you are looking for
-
I've tried to uninstall and reinstall the app but nothing happens. When I try to open the app, it either crashes immediately or asks me for my iTunes password and the the app does nothing or crashes. Has anyone else had this problem? Any suggestions?
-
Fraudulent calls on my account. Need refund of $12...
Hello, I have a Skype account (mosaicsteph) that I have not used in 6 months. I have a credit card on file and when my account is below 50 cents it automatically adds funds back to the account. On November 11, 2012 my account was accessed by an unkno
-
I have two tables (Accounts, and Accounts_LOAD). The _Load table is a daily feed. For my first step, I need to delete all the duplicates from _Load that exist in Accounts. How can I delete duplicate entries which exist in two tables..?
-
I have seen this question around the net several times, but no proper solution have been provided. What I am doing is that I am basically returning the last 5 results in the db. The db. has a potential for a size about 1000 rows. Even though by the u
-
Hi, I have a strange problem on my T21 IBM laptop, I have installed Solaris 8 (07/01) on it. Whenever I reboot the system by using init 5,6, shutdown or poweroff commands it comes back and get stuck just after the boot window(the one we use to do sin