How to find an external HD
Hello, my question is, when you eject a external HD from your Mac, how can you get it back if you need it again?
Regards Alex
One way is to launch Disk Utility (in the Utilities folder), select the disk in question from the list on the left, and hit the "Mount" button at the top.
charlie
Similar Messages
-
Terminal - how to find my external hard drive using unix commands
just discovered terminal and using cd and ls commands, which are the only commands i know, i realized that i can't find my external hard drive. i thought it would be listed on my desktop, as it is in the OSX interface, but it isn't there.
not that im skilled enough to use terminal yet, but i thought the first step would be being able to navigate the computer's files.
really curious as to where my external hard drive is and how i can find it using unix commands in terminal.
i was trying to figure it out myself, then i thought surely someone knows this and could tell me in a sec.
thanks.
ibook Mac OS X (10.4.4)
ibook Mac OS X (10.4.4)"ls /Volumes" will list all volumes, including internal and external hard drives and mounted disk images. I find "disktool -l" more useful in scripts, as it tells you which volume names correspond to which "mount points" under /Volumes. Usually they're the same, but if you have two volumes with the same name, or you try to remount a removable volume before it is fully unmounted, you'll end up with a mount point that consists of the volume name with a numerical suffix.
-
How to find out external IP address of my WVC54GCA
Hi
My provider changed the IP address so I have no access from outside of my network.
I know, I'll have to use DynDNS and I will, but now I ned the IP address and I'm not able to find it out.
Any tipp?
Thank you in advance,
FreddieHi
Thank you for your answer!
OK, I try to reply as following (excuse my bad english):
- An alternate web access port isalready enabled on the camera and it's port forwarded on the router. I had access from everywhere before my provider changed the IP.
- I use DynDNS, but only for one Computer (with the tool "Dyn Updater"). My goal is to use the cam as a second device with DynDNS, but I guess I need the external IP first...
- DHCP is activated. Not on the router but on my WIN 2003 Server. I can't find the cam there (under the DHCP section), only my Computers and Printers.
- Also, I can't find the external IP of the cam within the Software or the Webinterface, only the internal (192.168.1.31). The external was 81.74.63.39:1031 before the IP change of my provider. Now I have 77.57.184... I tried different IP scanners, but they all only show the internal IP.
Hmmm, do I have to install the cam again or just run the setup?
Thanks,
Freddie -
How to find my external hd in mac, connected trough my router
Hi I am new to mac and this forum. I do have a WL router to control my home network and through this router i have mounted an external HD to share files through my network.
How do I find anf connect to it in mac?
- thanks a lot newbe!!Hi problem solved! I did find my wl hd drive, it is in finder on the left side below shared.
Sorry for all the trouble!! -
How to find my external hard drive
I have a external hard drive "Simple Tech" and i plugged it into my macbook pro and can not figture out where it is at. I am wanting to take my music off of the external hard drive and put it onto my itunes. I would love step by step directions would be great.
Repair permissions and restart your computer. Step by step instructions are in the Help menu.
Resetting your Mac's PRAM and NVRAM -
Labview program to find the external hardwares connected with the PC
Hai All,
Do any one know how to find the external hardware details connected with our PC (like USB memory stick), using labview program.That's assuming the user is running Windows.
If you are under Windows you can access this information from the Registry. For example, for USB you can look at the key
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB.
Message Edited by smercurio_fc on 04-30-2008 10:39 AM -
I move folders from my internal hard drive twice to an external hard drive. Now I believe Lr does not know how to find my photos. What can I do to get this cleared up.
Jim has a very good suggestion. There are many factors at work here:
1) How are you connecting the external drive to the computer?
2) How big are files (329 x 1MB is not the same as 329 x 25MB)?
3) What is your computer specification?
4) Do you have any power saving settings on (in particular something that would send the computer/hard drives to sleep)? -
I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."
-
Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.
Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.
-
How to find in R/3 System, which FI document is from which external system?
Hi Moderator/ FICO Experts,
How to find in R/3 System, which FI document is from which external system?
In case of different Non-SAP external Systems posting the data to one R/3 System.
Thanks
ChandraHi,
That really depends on the interfaces that your external systems are using. Check with your ABAP or BASIS team to see what is the method used for posting those documents and with which parameters is passed. Look at BKPF table (FI header) to see the attributes such as user, document type, reference, etc.
Regards,
Eli -
How to find the WebUrl alert was raised for external network
I have two weburl's requestes to monitor under SCOM2007 R2
url one: https://www.asdftest.com
url two: https://www.lkjhtest.com
"url one" is configured to access the weburl from internal network and external network(internet) as well.
"url two" is not configured to access from external network(internet). only configured for for internal network.
I have configured for scom monitoring for the above two urls using the SCOM 2007 R2 web application template. After configuration i have not received any alert from the "Url Two"
Q1). I am expecting an alert for "Url two" because it is not configured for external network access.
why i was not received any alert for that.
Q2). How to find an web Url alert is raised for internal network or external network. SCOM Tool is not asked me to specify that the weburl is is from internal/external network access.
Q3). Particularly how to find the Url alert was raised for external network
please suggest me and correct me if i am wrong.
Thanks in advance.Hi,
Please refer to your another thread:
http://social.technet.microsoft.com/Forums/en-US/10d32ff3-d1a5-4875-b1ad-bb01a5799a33/web-url-monitoring-internalexternal-network?forum=operationsmana
Regards,
Yan Li
Regards, Yan Li -
How to find External Bank Reconciliation # given Check #?
I have a check number for an outgoing payment that has been reconciled on a bank rec, and we can't locate the Bank rec.. Is there a way to find the Bank Rec# that the check was on? Any information as to how to find this would be greatly appreciated. Thanks. this is on version SAP B1 2007.
The link between Check # and External Bank Reconciliation # would probably be a many to one relationship. There is no direct link between them. You may have to dig into the G/L account for all detailed JE for find them.
Thanks,
Gordon -
I have sensory issues. How can I find an external monitor that isn't too bright?
I have sensory issues which make bright lights very painful. Some monitors are too bright to look at. I chose a Macbook Air, in part because Apple allowed me to dim the screen, but I wanted to find an external monitor so I could use the Macbook as a desktop as well as a laptop. I recently tried an Aoc monitor, but it doesn't allow me to dim the screen enough without special software. I would rather not have to use extreme settings [Brightness 0] and special software [Easy on the Eyes] to dim the screen. I had tried comparing brightness in-store, locally, but I guess I couldn't tell because the store was full of bright lights, and because I was wearing sunglasses to cope with the bright lights. Can anyone suggest ways to find better more accessible monitors?
There are two ways. Likely if you have the money, the Apple monitor would likely be the best options since it powers your macbook and other stuff as well. It is expensive though. For a nonApple monitor the feature you are looking for is called backlight level. The brightness control doesn't actually control brightness as might be expected because it modifies the signal. The backlight level however does control the brightness of the backlight itself, like the buttons on a real mac. You won't be able to use the buttons on the keyboard though. So when you go shopping, make the salesman show you this feature in the store in the monitors interface and you should be good to go.
Also, if you are sensitive to bright light, did you know about the ability to assign a single key on the keyboard to invert the screen instantly? I prefer white text on black myself. -
How to find type of a table....
Hi,
There is a name that is either a normal table or external table or queue table. How to find out table type. Type column of user_objects shows type as Table for all the three.
Regards,
SanjeevSanjeev according to me, all the three are in different dictionary tables and not in one user_tables. user_tables hold information only for normal tables.
SQL> desc USER_EXTERNAL_TABLES
Name Null? Type
TABLE_NAME NOT NULL VARCHAR2(30)
TYPE_OWNER CHAR(3)
TYPE_NAME NOT NULL VARCHAR2(30)
DEFAULT_DIRECTORY_OWNER CHAR(3)
DEFAULT_DIRECTORY_NAME NOT NULL VARCHAR2(30)
REJECT_LIMIT VARCHAR2(40)
ACCESS_TYPE VARCHAR2(7)
ACCESS_PARAMETERS VARCHAR2(4000)
SQL> desc USER_queue_tables
Name Null? Type
QUEUE_TABLE VARCHAR2(30)
TYPE VARCHAR2(7)
OBJECT_TYPE VARCHAR2(61)
SORT_ORDER VARCHAR2(22)
RECIPIENTS VARCHAR2(8)
MESSAGE_GROUPING VARCHAR2(13)
COMPATIBLE VARCHAR2(5)
PRIMARY_INSTANCE NUMBER
SECONDARY_INSTANCE NUMBER
OWNER_INSTANCE NUMBER
USER_COMMENT VARCHAR2(50)
SECURE VARCHAR2(3) -
How to find number of files in a folder using pl/sql
please someone guide as to how to find number of files in a folder using pl/sql
RegardsThe Java option works well.
-- results table that will contain a file list result
create global temporary table directory_list
directory varchar2(1000),
filename varchar2(1000)
on commit preserve rows
-- allowing public access to this temp table
grant select, update, insert, delete on directory_list to public;
create or replace public synonym directory_list for directory_list;
-- creating the java proc that does the file listing
create or replace and compile java source named "ListFiles" as
import java.io.*;
import java.sql.*;
public class ListFiles
public static void getList(String directory, String filter)
throws SQLException
File path = new File( directory );
final String ExpressionFilter = filter;
FilenameFilter fileFilter = new FilenameFilter() {
public boolean accept(File dir, String name) {
if(name.equalsIgnoreCase(ExpressionFilter))
return true;
if(name.matches("." + ExpressionFilter))
return true;
return false;
String[] list = path.list(fileFilter);
String element;
for(int i = 0; i < list.length; i++)
element = list;
#sql {
insert
into directory_list
( directory, filename )
values
( :directory, :element )
-- creating the PL/SQL wrapper for the java proc
create or replace procedure ListFiles( cDirectory in varchar2, cFilter in varchar2 )
as language java
name 'ListFiles.getList( java.lang.String, java.lang.String )';
-- punching a hole in the Java VM that allows access to the server's file
-- systems from inside the Oracle JVM (these also allows executing command
-- line and external programs)
-- NOTE: this hole MUST be secured using proper Oracle security (e.g. AUTHID
-- DEFINER PL/SQL code that is trusted)
declare
SCHEMA varchar2(30) := USER;
begin
dbms_java.grant_permission(
SCHEMA,
'SYS:java.io.FilePermission',
'<<ALL FILES>>',
'execute, read, write, delete'
dbms_java.grant_permission(
SCHEMA,
'SYS:java.lang.RuntimePermission',
'writeFileDescriptor',
dbms_java.grant_permission(
SCHEMA,
'SYS:java.lang.RuntimePermission',
'readFileDescriptor',
commit;
end;
To use:
SQL> exec ListFiles('/tmp', '*.log' );
PL/SQL procedure successfully completed.
SQL> select * from directory_list;
DIRECTORY FILENAME
/tmp X11_newfonts.log
/tmp ipv6agt.crashlog
/tmp dtappint.log
/tmp Core.sd-log
/tmp core_intg.sd-log
/tmp da.sd-log
/tmp dhcpclient.log
/tmp oracle8.sd-log
/tmp cc.sd-log
/tmp oms.log
/tmp OmniBack.sd-log
/tmp DPISInstall.sd-log
12 rows selected.
SQL>
Maybe you are looking for
-
Error while running Test-SpContentDatabase. How to resolve?
PS C:\> Test-SPContentDatabase -Name WSS_Content_2222 -Webapplication http://10.10.24.241:2222 Category : SiteOrphan Error : True UpgradeBlocking : False Message : Database [WSS_Content_2222] contains a site (Id = [3eafefc7-e4
-
Hello I have a problem with my HP Pavilion Elite HPE - 555sc. I`m trying to install windows 7 on the SSD through recovery disks I ordered from the HP support page. This dosen`t work to the SSD, so i tried doing it to my HDD last night. When the insta
-
Erroneous behavior of return keys in Indesign CS5
Strange and reproducable serious error of Indesign CS5: Pressing the main return key within a text paragraph doesn't enter a line break but a "new column" break making all text below disappear (and being pushed to the next column or linked text frame
-
I'm not sure how I managed to do this but... I deleted my VmareFusion partition with win7, and vmware fusion. Then I upgraded to Lion. Then... I created a new partition using Bootcamp assistant and then re-installed Win7. At some point, when I was aw
-
Privileges required for database backup with RMAN
Hello, We have 10g R2 on Solaris box. We use RMAN for backup and use the SYS account on the database to connect and take the backup. Are there specific privileges that are required to take the database backup , so that I do not use the SYS account or