HOW TO FIND AND CORRECT THE SQL QUERY ERRORS ????

Sometimes I get the errors while executing the sql queries.
I just wanted to know about the various ways by which I can find the sql query errors .
Any suggestions will be deeply appreciated.

If you get the an error from SSMS and you can't comprehend it, you can google the error message and google would always lead you to the correction. Or you can post the error in this forum, people
here are always kind and ready to help :).
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Similar Messages

  • I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

    I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

    cr is installed by updating your app.  use help>update, or update manually
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • HT4009 I did not download the in-app purchase at time of original App download, now I cannot figure out how to find and download the in-app purchase.  Please help!

    did not download the in-app purchase at time of original App download, now I cannot figure out how to find and download the in-app purchase.  Please help!

    Hello paddyliverpool,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Refund is an option.
    Best of luck,
    Mario

  • How to find leap year in sql query

    How to find leap year in sql query

    Select
    CASE
      WHEN result = 0 THEN 'Leap_Year'
      WHEN result <> 0 THEN 'Not_A_Leap_Year'
    END
    From (Select mod((EXTRACT(YEAR FROM DATE '2013-08-24')), 4) result FROM DUAL);

  • How to find duplicate row in sql query?

    Hi All,
    Please solve my query, find duplicate row and how to count its. your suggestion would be greatly appreciated.

    You can use group by and having.
    SQL> WITH t
      2       AS (SELECT       LEVEL id
      3                 FROM   DUAL
      4           CONNECT BY   LEVEL <= 5
      5           UNION ALL
      6           SELECT       LEVEL + 2
      7                 FROM   DUAL
      8           CONNECT BY   LEVEL <= 3)
      9  SELECT   *
    10    FROM   t;
            ID
             1
             2
             3
             4
             5
             3
             4
             5
    8 rows selected.
    SQL> WITH t
      2       AS (SELECT       LEVEL id
      3                 FROM   DUAL
      4           CONNECT BY   LEVEL <= 5
      5           UNION ALL
      6           SELECT       LEVEL + 2
      7                 FROM   DUAL
      8           CONNECT BY   LEVEL <= 3)
      9  SELECT     id, COUNT (*)
    10      FROM   t
    11  GROUP BY   id
    12    HAVING   COUNT (*) > 1;
            ID   COUNT(*)
             3          2
             4          2
             5          2
    SQL>

  • How to find and replace the text present in the url

    I have a column of type NCLOB with some text having url's in between as shown below:
    ========================================================================
    This text is for testign purpose.This text is for testign purpose.
    <A PL/SQL <U PL/SQL </U> </A>
    Thsi text is also for testign purpose.This text is for testign purpose.
    <A http://forums.oracle.com> <U oracle metalink> </U> </A>
    This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
    ========================================================================
    Requirement:
    ========
    Requirement is to implement the find and replace functionality.
    I just need to check whether the search text is present in the url or not?
    Suppose if search for orcale.com, since its part of the url so the search should be successful otherwise search should be unsuccessful.
    Here I can give you the hint like, always the url lies between the anchor tags *(<A </A>).*
    Tahnks in Advance.

    I had I think a similiar question the other day thay I Frank and Michaels answered for me.
    not sure if I totally have what you want but.
    WITH t
            AS (SELECT '<A PL/SQL <U PL/SQL Thsi text is also for testign purpose.This text is for testign purpose.
    <A http://forums.oracle.com> This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
                          txt
                  FROM DUAL)
    SELECT REGEXP_SUBSTR (REGEXP_REPLACE (txt, '(.*<A)|(</A>.*)'), 'oracle.com')
      FROM tthe first part the regexp replace part gets the text between a start and end point you mentioned that would be <A and </A>
    the regexp substr just looks for the phrase oracle.com in the text between those two points.
    Edited by: pollywog on Oct 6, 2010 8:26 AM

  • How to find and display the posistion in an array list

    hi all,
    i know this is proballly simple but i have an arraylist where every time someone connects to my system it adds them to an arraylist, how can i post back somelike like hi user "1" thanks for connecting and so on. i just dont understand how to find their unique posistion in the array list and display it as a number.
    any help would be great

    So to be clear...
    You have an arraylist of connections .... for example
    ArrayList<ConnectedPeople> connPplArr = new ArrayList();And then each time someone connects you would add a connected people object to the arraylist.
    ConnectedPeople, migh contain username etc etc.
    You could then do:
    ConnectedPeople newConnection..... ;
    int index = connPplArr.indexOf( newConnection );
    if(int == -1){
        add them to your array
        index = connPplArr.size();
    return "Hello user "+ index;That what you mean?
    I know some of it is sudo code, but have I understood your problem?
    Edited by: Azzer_Mac on Apr 29, 2008 2:20 AM
    Edited by: Azzer_Mac on Apr 29, 2008 2:20 AM

  • How to find and install the Portal Development Kit (PDK) for SAP Enterprise

    Hi ,
    I have the following question regarding thePortal Development Kit (PDK) for SAP Enterprise Portal 6.0. We have Enterprise Portal 6.0 up and running.
    1> How Do I find whether we already have this inported in the EP environment: I have admin and super admin role and trying to find '*java' in the Role. But didn't find one. Does that mean we don't have this imported already?
    2> I have tried to Find out the PDK( which is also a Business Content) in SDN in the Portal Business content link (https://www.sdn.sap.com/sdn/contentportfolio.sdn) , but haven't found. Where from I download this business content?
    3> What are the special steps that need to be taken to import this and make it working?
    Thanks
    Arunabha

    Hi Arunabha,
    1. Note that the search is case sensitive. Therefore you should search for java and Java.
    2. Download from: https://www.sdn.sap.com/sdn/downloaditem.sdn?res=/html/PDK60_download.htm
    3. Deploy with SDM: http://help.sap.com/saphelp_nw04/helpdata/en/22/a7663bb3808c1fe10000000a114084/content.htm
    Hope that helps,
    Yoav.

  • How to find and replace the main logic board on HP4600N Laser Printer.

    Can anyone let me know how to replace the main logic board on my HP Laser 4600 N.  My printer was freezing up and in calling customer service, they informed me that the main logic board is going bad.  Now I have the part but no instructions on how to replace or where to find it on the printer. 

    A Google search may turn up a downloadable service manual for the Laserjet 4600.
    You might also ask in the HP Enterprise Business Community Forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to find and separate the Erraneous records in Session Method?

    Hi,
    Currently we are working in SAP-HR.Our programs run using Session  method of BDC.We get data from Legacy System through Flat Files which are in text format.First I upload the data for Actions Infotype 0000 and subsequently the other Infotype data.When I run my session if some records go in Error i want to filter out those erraneous records from Actions file and also other Infotype files and then proceed with data upload.Is there any method to do this?
    Also when the Session is in process i want to trace the status of each record i.e. Is it processed or rejected. How can i achieve this ?
    Can anyone help me in this.
    Thanks & Regards
    Ravi

    Hi Sanjay,
    Thanks for your response.
    But my problem is that i want to Automate the whole process with less manual intervention.I want to shedule all the jobs in background and when the Actions Infotype (0000) is uploaded and it gives errors i want to filter those error records in separate file and also filter those records from subsequent infotypes file if they are present.
    Also how to check the status of each record when the session is in progress? This i need because i want to send acknowledgment files to Legacy system saying that these many records are successfully uploaded and so many are in errors.
    How can i automate the whole process?
    Regards,
    Ravindra

  • How to find and replacing the path (url) given for data binding from type 'datasocket'

    Hi everyone,
    I'm sorry to pose this question as my own knowledge is still very limited.
    I have an assignment (bachelor level). We were asked to adjust a plc program in step7 so that multiple of an existing sequence could be run indepently.
    The settings for that sequence are controlled by labview. Sensor data is also viewed in labview.
    There is an existing labview VI that was made by someone else before us. It uses 'Datasocket' type for data binding. Because we would like to adjust this VI to be used with the other sequences, we would like to change the original path or URL quickly, as in a 'Find&Replace' solution. Yet the find and replace only works for objects or text, not entries in the properties.
    Can someone please tell me if there is a way to do is, without having to use shared variables, as we are not at all known with this type.
    Many thanks,
    Niels

    Dear Niels,
    Please find the attached example. I placed 5 controls on the front panel, all with a data socket URL (control 1 = URL1, control 2 = URL2 etc). Through property nodes I did the following;
    - I got a reference to the front panel
    - with this reference we can get an array of references to the controls on this front panel
    - one by one we will read the references and check the data socket URL from the control, we compare this with the URL we are searching
    - if found, stop we will use the reference to write a new URL to the control.
    Please notice the default values of the controls; it is set to search for URL3 and replace this with URL10, run the VI once and you will see that happening. I also included a sting indicator which will show you the label of the control which we find. Also a Boolean indicator in case we were not able to find the URL.
    I downsaved the VI to 8.6, I'm not sure in which version you are working, if you have 8.6 or higher you are able to open it. Hope this brings you further,
    Best regards,
    Martijn S
    Applications Engineer
    NI Netherlands
    Attachments:
    findURLexample.vi ‏12 KB

  • How to find and edit the seeded invoice template from receivables

    Hi,
    I want to edit the seeded invoice template which comes from receivables. How can I see the name of the template, as I run the invoice from Transaction -> Transactions -> Open an Invoice and then click on the button next to the Transaction Number. I have tried finding it in XML Publisher responsibility, but I cannot find that particular template.
    Thank you in advance!

    Hi,
    I believe I have my answer now, or at least a good thread on the subject going hear:
    http://forums.java.net/jive/thread.jspa?threadID=45148
    Thanks,
    Mark

  • I had a system crash(with Vista).I cannot start up windows on that drive.I have Win 7 on a new drive.I can access the files on the old drive to copy them.I would like to know how to find and copy the bookmarks from Firefox on the old drive and copy to the

    Hi:
    I had a system crash and I cannot start windows (Vista)on it.I have a new drive running Win 7.How do I copy the files from the old drive's files to the new?The Bookmark files that is.
    Thanks.Any help is appreciated.
    Shaun

    This could help.
    http://support.mozilla.com/en-US/kb/Backing+up+your+information
    Basically, you have to copy your profile from the old hdd to the new one.

  • How to Find and Contact the Owner of a Stolen Silver iPhone 5?

    I have decided to do a really good deed for a victim of an iPhone Thief. Can you please help me contact the owner of this device?
    This is the following details of this device:
    Type: iPhone 5
    Color: SIlver
    IMEI: ***
    ICCD: 8963 0313 2530 1034 6018
    Location: Manila, Philippines
    Please help me out guys! I dont want my effort to go such a waste. This is a big deal for the owner.
    Thank you!
    Sincerely,
    Mr. Goody Good
    <Personal Information Removed by Host>

    Well that was pretty stupid then!
    You have also asked the same question before, so don't keep asking the same question just because you don't get a reply.
    If you have purchased a stolen iPhone, then you need to hand it into the police and let them find the owner.  If the phone is locked, then you have a brick and there is absolutely nothing that you can do.
    Why would you want to waste good money on a birthday present to yourself that you can never use?  Get real.
    Hand the phone into the police.

Maybe you are looking for

  • Using Multiple AD domains with ACS

    Hi, Is it possible to use multiple domains for authentication with ACS? I need to use AAA to authenticate remote users into a centralised location but the users will be from different domains and I was hoping to use a single applicance to cater for a

  • Line rental increase from December to £14.70 witho...

    I've seen in the press that line rental will go up by 90p this december.  Also, oher charges will be going up too. Well guess what, my salary has not gone up twice in one year.  I will be switching my landline to o2 and keeping their broadband.  I wa

  • Macbook Pro with SSD 10.8 OS install CC desktop failed

    System disk (256GB SSD) has 210GB before installation process started, 16GB system DIMM available, OS is v10.8. The process of updating Creative Cloud Desktop could not be finished, system prompted warning message of "insufficient memory for app inst

  • How to load webpage in app ?

    Hi guys. Is it possible to load the web page in app ? Now I am using below code to load the web page: [[UIApplication sharedApplication] openURL:[NSURL URLWithString:@"http://www.webside.com"]]; But this code leaves the application process. How to ma

  • Add Row instance but with adjusted cell references

    Is there a by to use the  AddInstance and have the cells in the "new" row have adjusted cell references , such as Cell1-1, Cell1-2 or will they have the same name always? I want the info from the cells to link elsewhere with Global Binding. Thanks, t