How to find and remove corrupted files?

Hi,
Can anyone give me some direction in locating and removing files that have been corrupted? I am trying to back up my system for the first time on time machine, and keep getting an error message. I visited an Apple store today for support and had them reformat my external drive. I am able to start the backup, but it quits and gives me an error message.
Thanks!

fatchay wrote:
my HD needs to be repaired and that I have an invalid directory count. Is this why I can't backup?
Run Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself).

Similar Messages

  • HT2905 No Display Duplicates under File. How to find and remove duplicate items in your iTunes library

    I now have iTunes ver 11.0.4.4 under Windows 7. I lost all iTunes stuff when updating to Windows 7. I have loaded thousands amd thousands of music files from backup disks, but there are many duplicates. I am attemping to re-establish my old library. I used to be able to remove duplicates quickly with the old iTunes. The new iTunes doesn't seem to offer the same service. Is there any way to remove duplicates quickly, or must I do it one by one?

    When deduping use Shift > View > Show Exact Duplicate Items as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    See also HT2905: How to find and remove duplicate items in your iTunes library
    tt2

  • How to streamline and remove duplicate files on my HD before I backup?

    How to streamline and remove duplicate files on my HD before I backup?
    is there a good program or freeware that can automate and isolate when I have
    duplicate files hiding in the many folders on my Drive... Yes, in a perfect world
    I should know better than having a Drive that is not perfectly organized
    I think there is something called SpringCleaning for windows
    is there something like this for Mac?
    Time machine won't let you remove something after you realized you backed
    up two of the same files... Thanks for ideas

    +is there a good program or freeware that can automate and isolate when I have
    duplicate files hiding in the many folders on my Drive.+
    You should back up your drive with Time Machine before you delete any files in case you make a mistake.
    Tidy Up! - 1.3.2
    http://www.versiontracker.com/dyn/moreinfo/macosx/17908
    +Time machine won't let you remove something after you realized you backed
    up two of the same files.+
    Click on the Time Machine browser icon on the dock. Locate the duplicate file you wish to delete and highlight it. Click on the button with the gear on and choose Delete "all backups of".

  • HT2905 Does anyone know how to find and remove duplicate items in the new itunes 11?

    I am having a hard time trying to figure out how to find and remove duplicate items under the New iTunes 11? Its not as user friendly as in previous versions. Does anyone know how to figure this out?

    As Jim said View > Show Duplicates
    or
    Option + View > Show Exact Duplicates

  • How to find and remove obsolete table entries from /SAPAPO/MATKEY table in EWM System.

    Hello,
    How to find and remove obsolete table entries from below tables in EWM System.
    /SAPAPO/MATKEY
    /SAPAPO/MATMAP
    /SAPAPO/MARM
    /SAPAPO/MATLOC
    /SAPAPO/MATMOD
    /SAPAPO/MATRQ
    /SAPAPO/MATLOTSZ
    Thank you,
    Pravin

    Pravin,
    First, tell me how you determine that these entries are 'obsolete'.
    Removing master data from SCM can usually be done using transaction WUF; however, you have to ensure that it is not re-sent to the SCM system, or you are just wasting your time.
    Best Regards,
    DB49

  • How to find and remove any special character in filename?

    I have a files in various Windows Servers 2003 with a special character at his names, who are causing problem with backup software, i don´t know what character is because in explorer they are not shown and in command line they are shown only as interrogation
    mark and for this, i don´t know how i will find and remove then.
    Thanks.

    Hi,
    I agree with Dave. We can try using
    chkdsk utility to check the file system and file system metadata of a volume for logical and physical errors.
    Regarding
    chkdsk, the following article can be referred to for more information.
    Chkdsk
    http://technet.microsoft.com/en-us/library/cc730714.aspx
    Best regards,
    Frank Shen

  • How to find and remove specific email messages

    I just read an article about a health department employee inadvertently sending a confidential e-mail to 800 users. The IT department shutdown the mail server and wihin an hour removed all copies of the message from the system.
    I asked myself, if that happened here, how would I do that? I could shutdown the Messaging Server, but not sure what to do after that.
    How would you identify, find, and remove a particular e-mail message from everyone's inbox?
    $ imsimta version
    iPlanet Messaging Server 5.2 HotFix 1.26 (built Mar 31 2004)

    Well, each message is stored as a simple text file in the store. Assuming unix, you could do a pretty simple find and grep, looking for a key phrase. exec rm from that, and you're done....
    After such brute force methods, you do need to run
    reconstruct -r

  • How do I find and remove hidden files

    For some reason, after the recent install of SL my 1TB drive is extremely bloated. I have deleted or moved just about everything possible from the disk (excluding system files and applications) and it still shows that I only have 94.08 GB of space available.
    Is there a good piece of software out there that will help me to find out if there are several hidden files and remove what is unnecessary?

    Wow ... that was enlightening. I discovered that somehow there is a hidden folder on the 1TB drive entitled "volumes" and within that folder is a subfolder entitled "Mega Drive" (my self-titled name for the 1TB boot drive), which is an exact duplicate of my previous hard drive.
    A little more about how I got here. I had to computer in to the Apple Store, after upgrading to SL, for what I initially though was a hardware issue. The Genius felt it was software, did an erase and install. When I got the macing back I tried to us Migration Assistant to copy files from my Time Machine drive, it took all night so I wasn't awake when it finished. I suspect that is where this folder came from, as the next day I could not find the information on my computer, so I started manually moving the files from that drive.
    The bottom line is this ... is it safe to remove trash this entire folder?

  • How to Find and delete Duplicated Files

    When i bought my iMac 18 months ago, most of the files from my old G5 where transfer in this iMac.
    Also, at this time, the G5 was connect in target mode to the iMac and I was copying files to my iMac when ever a files was needed.
    I now realise I have lots of duplicted files.
    How can I find and delete all thosew duplicates items? Is there a fast solution? Automator?
    How about mail import, I also have lots of duplicate email. Is there a solution to all this?
    Than you for your help.
    BigBlaze

    You can find programs to do what you want by going to Google and post the same question you did on here.  One I noticed was GEMINI by MacPaw.  Good Luck.

  • How to find and remove unwanted s/w?

    I downloaded free version of ;'Little Snitch'.  It now regularly throws up an invite window to (buy &) upgrade.  This message s/w is what I would dearly love to remove.

    Malicious software doesn't always require a administrative password to gain "root" powers, thus control the entire machine, in order to be destructive. It can do a lot just running in what's nicknamed "user space".
    Any user level from Guest to Admin can run a program on the machine, as long as this condition exists, the potential for malware being run on the machine exists in some privilege level or another depending upon the users access level.
    The intention of some malware may to be to run in a lower privilege mode of the user and monitor the user and or their files for valuable information like credit card numbers and passwords entered, then to pass this information online.
    Or it might be that the initial malware could only install a small portion of itself on the users machine, thus needs to "phone home" to download the bigger payload.
    There are 65535 networking ports on modern computers, only a small fraction of those ports are used, so it leaves plenty of ports available for other uses, like for malicious purposes.
    Compromised web browsers can open new ports to make stealthy connections to command and control servers or to download more malicious software, or even upload the contents of a users files much like users upload files to websites.
    Where LittleSnitch comes into play is it's a outgoing firewall, which is the opposite of the incoming firewall in OS X. It watches all processes on the machine and when they attempt to make a outgoing connection it doesn't recognize or it's out of bounds of what it has been allowed, it will then flag the user for approval.
    It also has a popup/fade-away window that informs the use of approved software making outgoing/incoming transmissions so in case a approved one (on a approved port) gets compromised (like a browser for instance) it will show unusual activity the user is not requesting.
    LittleSnitch keeps the advanced user "in the loop" of the hidden outgoings  with their machine. Apple doesn't employ a outgoing firewall because they don't want to scare users unnecessarily.
    LittleSnitch is not a 100% guaranty to prevent malware, it runs in the root level space so it's safe from "user space" malware.
    All bets are off if the user gives malware their admin password, thus gaining "root" access, wether or not LS is installed or not.
    In the past not many Mac users ran LittleSnitch, however today it's more common and malware writers had to adapt to attempt to remove LS if they gained root access on the machine.
    There exists the possibility the malware writer doesn't know about LS, or is careless or can't remove it for some reason or another, which will give the experienced Mac user running LS a upper hand, which they can then notify others of the malware. or unsual outgoing network connections.
    Again it's to have more eyes out there watching instead of being blindfolded.

  • How to find and delete duplicate files?

    Is it possible to have duplicate programs too.  I think I downloaded Picassa two times.  If so how do I delete them?
    thanks,

    Search with spotlight (command-option-space) then select the result and press command-r and it will take you to the file location.

  • HT2905 How to find and remove duplicate items in your iTunes library for iTunes 11

    I found instructions for iTunes 10, not the same as 11. New to iTunes - have LOTS of duplicates. There must be a way to delete them besides one at a time! Please help...

    If you don't see a menu bar press Ctrl+B to reveal it or Alt to show it temporarily. To check your library for duplicates use Shift > View > Show Exact Duplicates as this is normally a more useful selection. Keep holding down shift until you have clicked on the text Show Exact Duplicates or it may still use the loser definition.
    If you find that you have true duplicates you need to manually select all but one of each group to remove, or use my DeDuper script if you don't want to do it by hand. The script attempts to take account of different types of duplicates which need to be handled differently, merges playcounts and preserves playlist membership. Please take note of the warning to backup your library before deduping. See this thread for background.
    tt2

  • Easiest way to find and remove duplicate files?

    My wife is a photographer and she's terrible at file management. Consequently she has duplicate versions of images stashed all over her almost full hard drive. What is the easiest waty to find duplicates of files so that I can get rid of them? Any freeware out there that does something like that? This would be for her Intel-based macbook pro running Tiger.

    Having spent several hours a few days ago organizing files, I was intrigued by your question.
    I found Singular which is appears to be freeware, for at least the time being. There's a link on the registration page that will register the application for you — I assume Singular has to be running for that to work, but that's just a guess.
    http://www.emeraldion.it/software/macosx/singular.html
    After you run Singular and drop files/folders on it, you can double click a duplicate entry and both versions are displayed.
    Good luck!

  • How to find and move iTunes file from back-up

    I have a new drive in my iMac.  Now I want to move my iTunes files from my backup, but I want to know how to move it to the new computer so all my equipment will get recognized by iTunes in my new computer.  Thank you.

    Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the computer.  Open iTunes and immediately hold down the Option (alt) key so you get a prompt to select a library, then guide it to the iTunes Library.itl file in the moved iTunes folder.
    If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)

  • Finding and Removing Deleted Files

    Hello,
    I was looking through the actual iTunes folder on my drive and discovered that there are a whole lot of files that I thought I deleted from iTunes but that are still taking up space on my drive.
    Is there anyway to get rid of these?
    Thanks for any help,
    -Grey

    This script -> List Music Folder Files Not Added v2.0
    "This script recursively searches user-selected folders for files not added to iTunes and creates a text file listing their file paths."

Maybe you are looking for

  • Create a new line in the xml-header structure.

    Hi, Can any one tell me how to create a new line in the xml-header structure. I am doing a IDOC-XI-HTTP scenario. Actually my mapping create this file: <b><?xml version="1.0" encoding="utf-8"?> <ORDERS05>   <IDOC BEGIN="1">     <EDI_DC40 SEGMENT="1">

  • Session variables being lost

    In my onApplicationStart method (which should tell you I'm using an Application.cfC, not cfM), I have a cfif loop that passes a value to a custom tag and returns a form variable. I'm then reassigning that variable to a session variable. In IE, this w

  • How to upload company code data related to Company Code BP01?

    How to upload company code data related to Company Code BP01 FOR CIN?

  • Make dimension values shown reflect other dimension filter values

    I have created a cube and uses access this cube in an Excel pivot table.  Is it possible to make values shown for one dimension display only the values valid, if I have selected another dimension's value that would limit the values that should show u

  • Cropping Still Very bad in iPhoto 08

    I am spending much, mcuh more time cropping my 200-300 photos per event that was a breeze to crop in iPhoto '06. Hoping the Apple Gods will read these posts so iPhoto can go back to being the very, very best. I want my iPhoto '06 cropping back. Pleas