How to find another BAdi for Transaction CCM2

I have written an Authorisation Check for transaction CCM2, but there are two select buttons.
load and load extended.
i added the Auth Check to BADI_CCM_EXPLOSION - Restrict Structure Explosion for Actual Configuration, which works okay when i click the "load" button, but this is not called on the "load Extended" button
I checked the BAdi - BADI_CCM_EXPL_ALWD - Restrict Structure Explosion of Allowed and Actual Config and BADI_CCM_CHK_STATUS Adjust the CCM2 Check Result by Technical Object but these are not called from the Transaction either.
is there another way for me to try and work what may be called within this transaction?
when i run through the debugger it always short dumps before i get anywhere as it does not like debug mode... any suggestions??? please?

Please skip if you already did this!
Place a break point in method of CL_EXITHANDLER->GET_INSTANCE at line 28, CASE sy-subrc (According to ECC 6.0).
Code looks like:
CALL METHOD cl_exithandler=>get_class_name_by_interface
EXPORTING
instance = instance
IMPORTING
class_name = class_name
CHANGING
exit_name = exit_name
EXCEPTIONS
no_reference = 1
no_interface_reference = 2
no_exit_interface = 3
data_incons_in_exit_managem = 4
class_not_implement_interface = 5
OTHERS = 6.
CASE sy-subrc.--> (Right here)
This METHOD will be called before triggering any BADI in SAP. After you place a break-point just process your transaction for which you are trying a find a BADI. Before triggering every BADI, code will stop right there and you could get to know your BADI Class and Method name through variables CLASS_NAME & EXIT_NAME respectively.
Reddy

Similar Messages

How to find the BAdi for an Enterprise Service

Hi All,
I am using an standard ES by SAP CashPointPaymentCreateNotification_In
I have to write some code in this hence trying to find the BAd
How can I find the BAdi for this ES?
regards,
Piyush

Hi,
First fidn out this service operation falls under which ES bundle. You can see all the ES bundles at this location:
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=B93B737648B94D26A01F85CC8C46510A&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=
Then once you find the operation "CashPointPaymentCreateNotification_In" click on it and it will giev you all the technical details including the BADI names that can be implemented for this.
Regards,
Pragati

How to find the BADI for the transaction CRM_IC in CRm 5.0

Hi all,
I have a issue:
in CRM 5.0, for the transaction CRM_IC (IC Web tcode), i need to do an enhancement for that tcode.
In crm_ic, we can enter Business partner and product id data,whenever we provide the inputs for BP and Product id and if we press enter then it displays the details like product description, UOM etc.
what i need to do is when we enter product id which is not available in Product Master,develop an enhancement which get those details from Cust / Dist chain and replace the entered value with retrieved value.
For this CRM_IC, I need to find the correct BADI.
Can any one send me out the Exact BADI for this requirement.

spro> crm > transactions > basic settings > badi's
BAdI: Product Processing at Item Level
In this step, you can create enhancements for product processing at item level in the business transaction The following methods are available to you in the Business Add-In CRM_PRODUCT_I_BADI:
CRM_PRODUCT_I_CHECK: BAdI to check object PRODUCT_I
CRM_PRODUCT_I_MERGE: BAdI to merge object PRODUCT_I

How to find the BADI'S in Web Dynpro ABAP

Hi Experts,
I'm new to Web Dynpro ABAP. Can any one tell me, how to find the BADI'S for standarad components like i.e DEMO_ROADMAP .Please tell me, steps/procedure to find the BADI'S in WDA.
Thanks ,
Chaitanya
Moderator message: wrong forum, please have a look in the "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on Jun 18, 2011 4:30 PM

Hi Nagaraju,
There is another fool-proof method to find BADIs while executing a transaction -
1. Goto transaction SE80
2. Select "Class / Interface", type in the class name CL_EXITHANDLER and 'Enter"
3. On the method GET_INSTANCE, create a Breakpoint just after the call to cl_exithandler=>get_class_name_by_interface at the following line -
<i>CASE sy-subrc.</i>
Once the breakpoint has been set, call the transaction you wish to find the BADI for and you will notice that the debugger opens everytime a BADI is about to be called. You could get the name of the BADI from the the value of the variable "EXIT_NAME".
CL_EXITHANDLER is a service class that is called by standard SAP code everytime a BADI is about to be called. So, setting a breakpoint here should let you know exactly which BADIs are called.
Hope this helps!
Thanks,
Rohini.

Reg: can anyone plz help me finding a badi for FB01

hi..,
   My requirement is to capture the profit center & change it w.r.to the profit center available in purchase order while posting a documet in FB01. iam trying to find a badi for this.. can anyone plz suggest me, how to proceed??? this is the first time iam dealing with badi's...

just run this program u find badi related to transaction.
*& Report ZNEGI16                                                     *
REPORT ZNEGI16                                 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
* Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
* Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
* For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.

How to find *screen badi*

hi,
i know how to find exits and badi for a particular transaction.
i just wanted to know how we can find screen badi for a specific transaction.(ex: mb_migo_badi for migo transaction)
can any one give suggestions in this issue.if possible send any documentation.
note:plz dont send the same old program to find exits and badis.

See point 8
Procedure
       1.      Start the Object Navigator (SE80).
       2.      Open an enhancement spot. For more information, see Creating, Editing, and Deleting Enhancement Spots.
       3.      Select the Enh. Spot Element Definitions tab page.
       4.      Choose Create BAdI.
A dialog box appears.
       5.      Enter a name and a short text for the BAdI.
BAdIs are in the same namespace as global data types from the ABAP Dictionary, global classes, or interfaces. For BAdIs, we recommend using the prefix u201CBADI_u201D (or u201CZBADI_u201D, and so on, in the customer namespace).
The new BAdI appears as a node in the tree display of the tab page.
       6.      On the right-hand side of the page, do the following:
                            a.      Enter the attribute for multiple use.
                            b.      Enter the instance creation mode.
                            c.      Enter the attribute for internal SAP BAdIs (only SAP internal use).
                            d.      Optional: Enter a Fallback Class.
                            e.      In the tree, expand the BAdI and choose the Interface node. Enter the name of an existing BAdI.
       7.      Optional: Choose the function Create Filter to create a filter.
Here you can:
                            a.      Enter the filter name, filter type, and description.
                            b.      Optional: If you choose Constant Filter Value During Call, you may only specify a constant value at the respective filter when using GET BADI. This is provided for future performance improvements of the statement.
                            c.      Optional: Enter either a data element or a domain with fixed values, or a search help. Alternatively, enter a check or input help class, and a length (together with decimal places). In this way, the filter values specified at GET BADIcan be checked during the BAdI implementation.
       8.      Optional: Choose the function Create Screen Enhancement in order to create the BAdI as a screen enhancement.
The BAdI must not be of a multiple use type.
                            a.      Enter Calling Program, Screen Number, Subscreen Area, and Description.
                            b.      Optional: Select Default Value to specify a screen of a program that is used if no active implementation is found at runtime.
       9.      Optional: Choose Create Function Code Enhancement to create the BAdI as a function code enhancement.
The BAdI must not have any filters and must not be of the type for multiple use.
                            a.      Enter Program, Function Code, and Description.
                            b.      Optional: Select Default Value to specify an icon, a menu text, a pushbutton text, and a quick info, all of which are used when no active implementation is found at runtime.
   10.      Optional: Create an example implementation.
                            a.      Select the BAdI, and choose Create Example Class from the context menu.
                            b.      Enter the name of a BAdI implementation class and a description.

Process to find user exit for transactions /sapapo/snptlb or /sapapo/sdp94

Hi All,
Can you help me out with the approach to find out user exits for transactions /sapapo/snptlb or /sapapo/sdp94?
What I am looking for is the approach, i mean how to proceed with?
Win full points for detailed answer !!
Thanks a lot - Chandan

Hi Chandan - this is the same as in any module of SAP:
1) check SPRO
If nothing is found then do the following:
1) Goto SE24 and display class cl_exithandler
2) Enter method GET_INSTANCE and create a break point at Line 25 (CASE sy-subrc)
3) Execute SAP standard transaction and invoke the process for which you need to create custom coding
4) Your break point will stop the process in debug mode - check the values of variable 'exit_name', it will contian the name of the BADI currently being executed.
5) Continue to debug by pressing F8 to see other BADI's
6) Repeat steps 3 thru 5 for each process that you want to find a BADI for
Regards
Andy

How to find USER-EXIT for tcode - F110

I am new in USER-EXIT Please help   how to find USER-EXIT for F110
ASAP

Hi,
Enhancement/ Business Add-in            Description
Enhancement
RFFOX074                                Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075                                Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081                                Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082                                Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100                                Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101                                Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102                                Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103                                Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104                                user exit
RFFOX105                                Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200                                Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210                                Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211                                Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230                                General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240                                Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250                                Enhancement for User Exit 250 (RFFODK_E)
RFFOX901                                Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902                                Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001                                Enhancement to Transaction FDTA (event after the download)
FEDI0002                                Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003                                Function exits for EDI docs in FI - Save PEXR segments
FEDI0004                                Function exits for EDI docs in FI - particular events
FEDI0006                                Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003                                Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041                                Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042                                Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043                                Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061                                Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062                                Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063                                Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064                                Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065                                Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066                                Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071                                Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072                                Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073                                Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT                         FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB                    F110: Check before scheduling a proposal/update run
No.of Exits:         36
No.of BADis:          2
Arunima

How to Find Business Objects for any Tranaction .

Hi Abapers,
How to find Business objects for any transcation..... and how to connect the Work flow to any Trancation so that for example any body changes the date of Birth ...... so that the work flow should trigger .
Thanks & Regards
Bhaskar Rao.M

Hi Bhaskar,
For finding business object,you can try transaction SWO4 and by checking the documentation in it you can find your required business object.
Another method is:
1) Go to Trx SWE4 and switch on the event trace.
2) Run your transaction which you want to use for triggering your workflow.
3) Run transaction SWEL and find your Business Object and related event in it.
For connnecting your WF to your transaction you have to create a start event in your WF in SWDD,where in you specify the Business Object and start event which you find using above method.
Eg.You want your WF to be triggered whenever you have an error in your idoc.For this your BO will be IDOCAPPL and your event will be (inputErrorOccurred).This you will give in header data in SWDD.
Neerja

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

User exit or badi for transaction IW32

Hi all,
I am searching for user exit or badi for Transaction IW32 but not finding as per my requirement.here in transaction IW32 if field system status(STTXT) key value is 'Released', all line item components should get displayed in display mode.it should not allow to edit or change line item components.can anyone give user exit or BADI to achieve this.
Thanks in advance.
Regards,
Harshada

Hi,
Try to use this exit:
Enhancement     EXIT_SAPLBSVA_001     STATTEXT     Modification exit for formatting status text lines
Sample code:
IF ( sy-tcode = 'IW32') .
DATA: lv_str1   TYPE string.
FIELD-SYMBOLS : <fs_qmart> TYPE ANY.
lv_str1 = '(SAPLIQS0)VIQMEL-objnr'.
ASSIGN (lv_str1) TO <fs_objnr>.
SELECT SINGLE inact INTO lv_inact FROM jest WHERE objnr = viqmel-objnr
                                                 AND   stat = c_stat
                                                 AND inact = space.
    IF sy-subrc = 0.
      LOOP AT SCREEN.
          screen-input = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDIF.
Alternativ badi:
BADI     SAPLIQS0          IQS0_STATUS_MAINTAIN     Control of Changeability of User Status
I hope this may helpfull.
Thanks,
AMS

How to find an table for storing the employee salary

hi,
how to find an table for storing employee salary .. In which table those details are stored .. Please reply me.
regards,
kumar

Hi,
You can see the basic salary details from table -pa0008.If you can see the payroll data,then its not stored in transparent table.its in cluster.For viewing that,you can see through transaction code - pc_payresult.
Regards,
Manoj.

How to find user exit for a perticular screen?

Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
Vj

User exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
        trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
      FORM get_data                                                 *
form get_data.
select single * from tstc
              where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
            where pgmid = 'R3TR'
              and object = 'PROG'
              and obj_name = tstc-pgmna.
if sy-subrc ne 0.
    select single * from trdir
             where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir
                     where pname = tstc-pgmna.
      select single * from enlfdir
                     where funcname = tfdir-funcname.
      select single * from tadir
                     where pgmid = 'R3TR'
                       and object = 'FUGR'
                       and obj_name eq enlfdir-area.
    endif.
endif.
select * from tadir into table jtab
             where pgmid = 'R3TR'
               and object = 'SMOD'
               and devclass = tadir-devclass.
select single * from tstct
          where sprsl eq sy-langu
            and tcode eq p_tcode.
endform.
      FORM write_list                                               *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey

How to find table information for a datasource?

Hi,
Can you please tell me how to find table information for a datasource. I am not getting much help from help.sap.
I am trying to find table information for below datasources. We are creating DSO's for the below mentioned datasources, for some we have standard DSO's(0WBS_O06), for others I am trying to create
0CO_OM_NWA_1,
0CO_OM_NWA_2,
0CO_OM_WBS_1,
0CO_OM_WBS_6
Please help me.
Regards,
Bob.

Hi BOB,
Another option to find the table information...
inorder to get the tables names involved in that particular data source follow the below steps.
1) ST05 --> activate the Trace
2) RSA3 --> enter your data source (for ex: 0CO_OM_NWA_1)
3) Execute
4) Now goto ST05 -> deactivate the trace
5) click on Display trace(F7) button
6) Execute
7) It will display the complete SQL trace
8) Now from the Menu "Trace list" --> select "Combined Table Access"
it will display the complete tables list involved in that data source...
From Table name section you can get the list of tables involved in that data source.
I had traced and took the information of tables involved in that data source 0CO_OM_NWA_1
0CO_OM_NWA_1
AFKO     Order header data PP orders
AFVC     Operation within an order
AUFK     Order master data
COSP     CO Object: Cost Totals for External Postings
COSPP     Transfer of the Order in the COSP Table to the Project
COSS     CO Object: Cost Totals for Internal Postings
COSSP     Transfer of the Order COSS Table to the Project
COVREF     Coverage Reference Table: All Processing Blocks
COVRES     Table of Coverage Results
You can follow the same steps and find the tables for the rest.
Regards
KP

How to find another BAdi for Transaction CCM2

Similar Messages

Maybe you are looking for