How  to   find  article based  support  for  ipad  or  technical notes

how  to   find  article based  support  for  ipad  or  technical notes

The problem comes from VBUK/VBUP which are the control tables for most of SD tables (from VBAK/P to LIKP/PS and VBRK/P) and manage uniqueness of id in the module (and stores statuses). Even item tables don't refer to their header but both refer to the same VBUK record.
e.g.
LIPS : VBELN/POSNR -> VBUK/VBUP -> but you will only find LIKP/PS itself and no record in VBAK/VBAP
LIPS : VBELV/POSNV -> VBUK/VBUP -> you should find VBAK/VBAP
The table VBFA "Sales Document Flow" manages the relations from/to between two different SD documents which exist in VBUL/P and in only one other table depending on type of document. (Also note that the exact relationship may sometimes be modified to some extent by Customizing SD.)
As Katan wrote, look for views defined in ddic, look also at logical databases (SE36) like VLV.
You can also find valuable information in OSS notes/documents like 185530 - Performance: Customer developments in SD.
Regards,
Raymond

Similar Messages

  • How to find my restore password for ipad

    Hi, hoping someone can help with a small situation, my son while apparently showing off what the ipad can do with a few friends managed to reset the thing. wont lull you to sleep whit his seemingly sensible at the time reasoning, suffice to say I now have two choices reload a years worth of information manually or restore from a previous back-up. my last save was at the begining of august and since then have had to use the good old command R trick,(another by junior still gotta love the kid ) so my password was saved on a now deleted hard drive and was hoping to somehow bypass or redo the pass word to save a little time. is it possible or am I on a seek and find through my app library?

    is it an itunes encrypted backup password?  if so see this
    http://support.apple.com/kb/TS5162
    or is a passcode lock? do this
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn phone off
    hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

  • How much is the maximum support for memory for hp dv6 6b68ex?

    i recently bought the HP dv6 6b68ex. i want to add more ram since only 6gb is installed
    i would like to ask if how much is the maximum support for ram for my laptop
    thanks

    Hi,
    Ok, I've found it now. Based on the following information, max RAM is 8Gb:
       http://h20195.www2.hp.com/v2/GetPDF.aspx/c03063996​.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to find out the description for the given field?

    Hi All,
    How to find out the description for the given field?
    I mean ETTYP  Desription is VTEXT. This we can find in TVEPT  Table. So, How canwe find this?
    Thanks in Advance
    Sri...

    Hi  Avi,
    If i want to disply the  fields like   AUART and 'Description of AUART',
    Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
    my question is if i have given T184-AUART  and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
    Thanks in Advance
    Sri...

  • How to find my SOA version for Oracle EBS?

    How to find my SOA version for Oracle EBS?
    Thanks!
    Wei

    please see
    SOA 11g Integration Support for Oracle E-Business Suite (Doc ID 1278194.1)
    AppsMaSti
    Sharing Is Caring

  • How to find out cellular number on ipad

    I have forgotten my cell number that m using for 3G on my ipad 2. Please let me know how to find out cell number on ipad 2

    Make sure that your Cellular Data button is turned on:
    CELLULAR DATA>CELLULAR DATA = ON
    Then the number should show up where Diavonex indicated above

  • How to find next number range for project definition in tcode CJ20N

    Hai Experts,
          Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
    Note: I searched in forum before posting, but couldn't find the solution.
    Thanks
    Regards,
    Prabu S.

    Hi,
    For project defination internal number is assigned by system.
    When you saves's project then system allocate one number to project defination, you can view it,
    SE11 >>> table  PROJ >> Click on contents >>> execute,
    here you will get your project defination & number is assigned to project defination.
    kapil

  • How to find classtype and class for a material.

    Hi,
    How to find classtype and class for a material.
    which table contains this data.
    Thanks
    Kiran

    Hi Kiran,
    Check below sample code. Use this BAPI which will give all info about the class for the material.
      DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                         VALUE IS INITIAL.
      CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                         VALUE 'MARA',
                 lc_classtype_imp   TYPE bapi1003_key-classtype
                                         VALUE '001',
                 lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                         VALUE 'FREIGHT_CLASS',
                 lc_e               TYPE bapiret2-type VALUE 'E',
                 lc_p(1)            TYPE c             VALUE 'P',
                 lc_m(1)            TYPE c             VALUE 'M'.
      SORT i_deliverydata BY vbeln posnr matnr.
      CLEAR wa_deliverydata.
      LOOP AT i_deliverydata INTO wa_deliverydata.
        REFRESH: i_alloclist[],
                 i_return[].
        CLEAR:   l_objectkey_imp.
        l_objectkey_imp = wa_deliverydata-matnr.
    *Get classes and characteristics
        CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
          EXPORTING
            objectkey_imp         = l_objectkey_imp
            objecttable_imp       = lc_objecttable_imp
            classtype_imp         = lc_classtype_imp
    *   READ_VALUATIONS       =
            keydate               = sy-datum
            language              = sy-langu
          TABLES
            alloclist             = i_alloclist
    *   ALLOCVALUESCHAR       =
    *   ALLOCVALUESCURR       =
    *   ALLOCVALUESNUM        =
            return                = i_return
    Thanks,
    Vinod.

  • HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

    iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.  I've seen reference to the  "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app.  I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for.  I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air.  Any help would be greatly appreciated.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

  • How to find out the Tcodes for the exits

    Hi All,
    how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
    Customer Exits: EXIT_RFEBBU10_001
                              EXIT_RFEKA400_001
                              EXIT_RFFOEXIT_100
    User-Exits:  USEREXIT_DELETE_DOCUMENT
                       USEREXIT_FIELD_MODIFICATION
                       USEREXIT_MOVE_FIELD_TO_VBAK
                       USEREXIT_PRICING_PREPARE_TKOMP
    BADI: CUSTOMER_ADD_DATA_CS
              HISTORICAL_VALUES
              MD_ADD_ELEMENTS
              MD_CHANGE_MRP_DATA
              MD_PIR_FLEX_CONS
              MD_PLDORD_POST
              ME_REQ_POSTED
              NOTIF_EVENT_SAVE
    Can anyone help on this <urgency factor removed>.
    Regards
    Ksihore
    Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

    i have just started reading about all these-user exits ,customer exits etc.
    i have read somewhere that:call to customer exits are triggered by function modules exits.
    the structure of function modules are like this:
    EXIT_RFEBBU10_001
    MEANS
    Keyword EXIT followed by program name fllowed by three digits.
    and the call is like this:
    call customer function 0001.
    From above we can conclude that this customer exit must be used in program RFEBBU10.
    GOTO SE38 andenter prog name RFEBBU10.check for above function module.
    for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
    using Where used lists.
    please Tell me if i m wrong!

  • How to  find the user exit for a screen..

    Hi,
    plz help me how to find the user exit for a screen..?
    Regards
    Anbu

    Hi,
    check this program this will give you the list of user-exit and BADI for the perticular Tcode.
    REPORT  zuserexit_badi.
    TABLES : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode,
    p_pgmna LIKE tstc-pgmna .
    DATA wa_tadir TYPE tadir.
    START-OF-SELECTION.
      IF NOT p_tcode IS INITIAL.
        SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
      ELSEIF NOT p_pgmna IS INITIAL.
        tstc-pgmna = p_pgmna.
      ENDIF.
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'PROG'
        AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
          WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
            WHERE pgmid = 'R3TR'
            AND object = 'FUGR'
            AND obj_name EQ enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
        SELECT * FROM tadir INTO TABLE jtab
        WHERE pgmid = 'R3TR'
        AND object IN ('SMOD', 'SXSD')
        AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(105) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
          SORT jtab BY object.
          DATA : wf_txt(60) TYPE c,
          wf_smod TYPE i ,
          wf_badi TYPE i ,
          wf_object2(30) TYPE c.
          CLEAR : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
          LOOP AT jtab INTO wa_tadir.
            AT FIRST.
              FORMAT COLOR COL_HEADING INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 'Enhancement/ Business Add-in',
              41 sy-vline ,
              42 'Description',
              105 sy-vline.
              WRITE:/(105) sy-uline.
            ENDAT.
            CLEAR wf_txt.
            AT NEW object.
              IF wa_tadir-object = 'SMOD'.
                wf_object2 = 'Enhancement' .
              ELSEIF wa_tadir-object = 'SXSD'.
                wf_object2 = ' Business Add-in'.
              ENDIF.
              FORMAT COLOR COL_GROUP INTENSIFIED ON.
              WRITE:/1 sy-vline,
              2 wf_object2,
              105 sy-vline.
            ENDAT.
            CASE wa_tadir-object.
              WHEN 'SMOD'.
                wf_smod = wf_smod + 1.
                SELECT SINGLE modtext INTO wf_txt
                FROM modsapt
                WHERE sprsl = sy-langu
                AND name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
              WHEN 'SXSD'.
    For BADis
                wf_badi = wf_badi + 1 .
                SELECT SINGLE text INTO wf_txt
                FROM sxs_attrt
                WHERE sprsl = sy-langu
                AND exit_name = wa_tadir-obj_name.
                FORMAT COLOR COL_NORMAL INTENSIFIED ON.
            ENDCASE.
            WRITE:/1 sy-vline,
            2 wa_tadir-obj_name HOTSPOT ON,
            41 sy-vline ,
            42 wf_txt,
            105 sy-vline.
            AT END OF object.
              WRITE : /(105) sy-uline.
            ENDAT.
          ENDLOOP.
          WRITE:/(105) sy-uline.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No.of Exits:' , wf_smod.
          WRITE:/ 'No.of BADis:' , wf_badi.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(105) 'No userexits or BADis exist'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(105) 'Transaction does not exist'.
      ENDIF.
    AT LINE-SELECTION.
      DATA : wf_object TYPE tadir-object.
      CLEAR wf_object.
      GET CURSOR FIELD field1.
      CHECK field1(8) EQ 'WA_TADIR'.
      READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
      MOVE jtab-object TO wf_object.
      CASE wf_object.
        WHEN 'SMOD'.
          SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
          CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
        WHEN 'SXSD'.
          SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
          CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
      ENDCASE.
    Reagards,
    Bharat.

  • URGENT: How to find out the Tables for Routines  in BW.

    Hi BW Gurus,
    How to find out the Tables for Routines  in BW.
    I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
    thanks in advance,
    points will be rewarded.
    Regards,
    Maruthi.

    Hi Maruthi,
    Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
    Cheers,
    Praveen.

  • How to find out the link for the tables for sub contract PO

    Dear All,
    How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
    Please provide the solution for the Table related to ABAP.
    Thanks,
    V.V.

    Hi,
       Make use of the table EKKO, EKPO...
    For subcontract please select the option in EKPO-PSTYP.
    Regards
    GK.

  • How to find the text id for the text in the sales order

    Hi all,
    How to find the text id for the item-text in the sales order?
    There are different Text available in  the sales order under item like Warehouse instruction, CSR instruction...
    I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
    Table TTXID contains the validation of the Text id.
    Please help me in knowing the way to identify the text-id from the text list..
    Thanks foryour help
    Suresh Kumar

    U can fetch the texts for the items using
    Read_text.
    Example:
        g_f_tdname = xvttp-vbeln.
        g_f_obj = p_obj.
        g_f_langu = 'DE'.
        REFRESH g_t_lines.
        CLEAR g_t_lines.
        CALL FUNCTION 'READ_TEXT'
             EXPORTING
                  id                      = p_var
                  language                = g_f_langu
                  name                    = g_f_tdname
                  object                  = g_f_obj
             TABLES
                  lines                   = g_t_lines
             EXCEPTIONS
                  id                      = 1
                  language                = 2
                  name                    = 3
                  not_found               = 4
                  object                  = 5
                  reference_check         = 6
                  wrong_access_to_archive = 7
                  OTHERS                  = 8.
        IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    The Required fields are,
    Text-id ,language,name,object.
    Let me know if you further require help.
    Regards

Maybe you are looking for