How to find associated transaction for SAP Prog.?

I made a change to an include within SAPLV61A. How can I determine how to kick off SAPLV61A so I can test the code?
Is there a way to find the associated transaction to SAPLV61A?
Thank-You.

Open this program in SE 80 (I think we are talking of module pool SAPLV61A, programs are RV61AFZA or RV61AFZB, etc. ) and Look under the list of objects under 'TRANSACTIONS' .
Also, this website would be of help :
http://www.saptransactioncodes.com
Hope this helps.
Regards
Vimal Vidyadharan

Similar Messages

How to find backend user for sap bw on Hana

Hi expert,
how to find backend user for sap bw on Hana , which are used to communicate with Hana.
Many Thanks.

Hi There,
Goto DB02,
Click on SQL Editor:
Execute the below Query:
select :session_user from dummy;
Regards,
Krishna Tangudu

How we find object list for SAP MM T codes.

Dear Experts,
How can i find object list for SAP MM T codes.
Actualy that is required for SAP User autorization review.
Regards
Kumar

Get t.codes list from table TSTCT using SE16,Enter t.code as MM* or M*. Execute it.
You will get a list of MM t.codes.
Also you can refer SU22 for authorization objects from above t.codes list.

How to find web address for SAP GUI for HTML enabled transaction ?

HI All ,
I have a transaction and in SE93 , the SAP GUI for HTML checkbox is marked for this transaction .
I believe we can access this transaction via web .
How to find URL for this web address ?
Please advise .
Regards,
Ambar Patil .

can be done through SICF

How to find standard Programs for perticular prog.

Hi Abapers,
How to find standard program is avalible or not in SAP to up load data for vendor master updataion ... through BDC or LSMW or BAPI ? .
If standard program is avalible in SAP . we can use it to upload ?.

hi madhu
yes we can upload the data , we can use the Direct input methods to upload the vendor master using LSMW tool . As goutham suggested use RFBIKR00 to upload the vendor master.
~linganna

How to find what transaction an user was running for a given period

hi
could anybody tel me
how to find what transaction a particular user was running for a given period
in the past.............

Hi,
U need to findout the list of Tcode excuted by SAP user
1) Tcode: ST03N
2) Select Expert Mode option
(there u find Server Host name & Today)
If u select Host name u find DAY/WEEK/Month (same thing will in Today option)
3)Now u need to select the option of DAY,WEEK etc.
Now u can find in two ways
1) Transaction profile (Standard / EarlyWatch)
2) User (user profile)
If u select the Transaction profile
Under these u find the option of Aggregation----application/package/tranasation etc.
I hope these will help u to findout.
Regards
ASR

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

How to find the transaction code for the particular program or include

Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
Muralikrishna

HI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful

How to find user exit for a perticular screen?

Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
Vj

User exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
        trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
      FORM get_data                                                 *
form get_data.
select single * from tstc
              where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
            where pgmid = 'R3TR'
              and object = 'PROG'
              and obj_name = tstc-pgmna.
if sy-subrc ne 0.
    select single * from trdir
             where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir
                     where pname = tstc-pgmna.
      select single * from enlfdir
                     where funcname = tfdir-funcname.
      select single * from tadir
                     where pgmid = 'R3TR'
                       and object = 'FUGR'
                       and obj_name eq enlfdir-area.
    endif.
endif.
select * from tadir into table jtab
             where pgmid = 'R3TR'
               and object = 'SMOD'
               and devclass = tadir-devclass.
select single * from tstct
          where sprsl eq sy-langu
            and tcode eq p_tcode.
endform.
      FORM write_list                                               *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey

How to find Archive data In SAP

Hi experts ,
How to find Archive data in SAP throught the following tcodes FTWL & AS_afb.
Thnx
Venky

Hello,
Transaction FTWL is for the DART files (not actually archived data) that are stored in your archive server. In order to run a query, or browse the DART file, you would need to "Import from archive" from within FTWL and then browse the file.
I am not sure what you mean by AS_afb. Please provide more information.
Regards,
Karin Tillotson

HOW TO FIND MENU PATH FOR A TCODE

PLZ TELL ME HOW TO FIND MENU PATH FOR A TCODE .
I HAVE MADE A MENU ENHANCEMENT WITH TCODE +DW2.
IT MENU PATH IS NOT TRACEABLE.

Hi Madan,
It is in the transaction code <b>S001</b>.
Check my previous post on this.
It is not listed on the SAP Menu. Thats why SEARCH_SAP_MENU returns nothing...
<b>Go to the Initial Screen and then type /n in the TCODE.
From there now type S001 to go to transaction S001.</b>
The other ways do not work. Like combining both in a single step : "/ns001".

How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0?

Hi,
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0? Please let me know.
Thanks,
Monica

Hi,
In SRM for all objects like SC ( BUS21210),BID,PO(BUS22010),Confirmation (BUS2203),invoice etc all the data stored
in BBP_PDHGP and BBP_PDBEI tables only, These is no separate tables..
for your reference below are the few SRM tables
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSB Bid Invitation
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISB Bid Invitation/Bid-Specific Item Data
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_H Business Transaction
CRMD_ORDERADM_I Business Transaction Item
CRMD_PARTNER Partners
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
Thanks & Regards,
Prasad S

How to find the webclient in SAP MDM server

How to find the webclient in SAP MDM server
Thanks In Advance
GuruvaReddy

Hi Guruva,
If you are talking about MDM APIs, then you will get them from Service place when you download the complete MDM 5.5 Suite. You need to choose the API which is appropriate to you. MDM comes with 2 different APIs - Java API and COM API as of SP1(The news is.. ABAP API is under development).
Pre-requisite for building applications using Java APIs is basic Java skills.
Regards,
Rajani Kumar K

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

How to find unreconcilled transactions ?

Hi All,
Can anybody guide on How to find unreconcilled transactions ?
BR
Samir Gandhi

Hi Samir,
In version 2007 use the table for journal entry lines, JDT1.
You will find the fields BalDueDeb and BalDueCred which indicates if there is an open balance, meaning, has the posting been fully reconciled or not.
There is no reconciliation field saying yes or no.
It is easy to write a query to find the results. However, as most GL accounts are not reconciled there will be many, it might be an idea to separate between BP postings and GL accounts postings.
Query:
SELECT Account, shortname, TransId, Debit, Credit, BalDueDeb, BalDueCred FROM JDT1 WHERE BalDueDeb - BalDueCred != 0
To remove all accounts just add in the where part 'and shortname != account' or to remove all BPs 'and shortname = account'
Hope it helps.
Jesper

How to find associated transaction for SAP Prog.?

Similar Messages

Maybe you are looking for