How to find Average & Max of a Restricted key figure

Hi Friends,
I have a restriced Key figure. How to find Average & Max for that Restriceted Key figure.
Post Asap.
Thanks = Points.

Hi Friends,
Let me explain my scenerio clearly.
I need to have five columns as below with char Current Assigne.
No of open cases No of Closed cases Avg age of closed cases Avg age of open cases Max age of Closed cases
Current Assigne.
Thanks,
James

Similar Messages

How to build Restricted Key figures in Universe?

Hi All,
I have been trying to find a way to build restricted key figures at BO universe level.
I have gone through the best practices documents and the mdx syntax documents.
Even though building Restricted key figures at universe level is not a recommended approach, we had a requirement to achieve it.
I have tried the below possilbe ways but could succeed only half way.
Please help me and others who has been trying to build the restricted key figures at universe level by guiding us.
Eg: A restricted key figure A1 is based on a basic key figure A, with a restriction on cost element C (detail object,cost element key)
I have built A1 with below syntax and could get correct result in web intelligence report
Select block of A1 measure object in designer
<Expression>@Select(Key figures\A)</Expression>
Where block of A1 measure object in designer
<FILTER KEY="[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="ABCD/1234567"/></CONDITION></FILTER>
But when I build another restricted key figure A2 out of basic key figure A with restriction on the same cost element key field but a different value like ="ABCD/678910".
Both A1 and A2 give correct results individually when they are dragged in a web intelligence query.
But when both of them are required to be dragged in the same query , no result comes because of the conflicting where clauses,as cost element key can't have both values at same time.
Then I tried building A1 in below ways, as mentioned in the mdx examples document
Trial 1:
Select block of A1 measure object in designer
<Expression>(@Select(Key figures\A),[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value].[ABCD/1234567])</Expression>
Trial 2:
Select block of A1 measure object in designer
<Expression>(@Select(Key figures\A),[0COSTELMNT].[ABCD/1234567])</Expression>
Trial 3:
Select block of A1 measure object in designer
<Expression>([Measures].[D787I2PW5YTGMTKL83RWBH80W],[0COSTELMNT].[ABCD/1234567])</Expression>
All the above expressions parse OK at universe level. Trial 1 gives a database error while running the query.
Trial 2 and Trial 3 nither throw any error nor return any result for A1.
If any one has tried and succeeded in implementing restricted key figures at universe level,please provide us some inputs.
Thank You.
Naresh

Hi,
this seems to be identical to this one:
Re: Condition Object for previous month data on current month input
I would suggest you close one of them as two entries asking the same is not a good idea
Ingo

Develop a Restricted Key Figure

Hi Experts
Please me on how to proceed
I am involved in developing a Restricted Key Figure.....which included a key Figure (Counter) and Resctriction on a CHAR of Data Type DATS.
In the Restriction i want to include all the records that are not assigned any date
When i include # in my restriction it is not working..please advise on how shall i proceed
Thanks

Hi,
create new Restricted key figure.
in Restricted key figure, drag key figure Counter and drag date on which you want to restrict and right click on date and select
'#' value and save Restricted Key Figure and drag that keyfigure into columns. and execute report.
check the data in the cube / DSO with the given selections date has ' # ' values and data should be available in report as well.
hope this helps
Regards
Daya Sagar

How to find average for non blank values

I need to calculate avarage for each restricted key figures. There are some blank values in this restricted key figures. Now I need to sumup and divide by non blank count. Do you know how to do it? How to count non blnak values and find avereage.
Thanks,
Phani

In the properties of Key figure used in column/row, Calculations section, you can maintain calculation type for result as well as single value. There is "Average of all values not equal 0" option is available.
Rgds,
Vikram.
Edited by: Vikram Kate on May 22, 2008 11:23 AM

How to find which Restricted Key Figures are using a specific hierararchy??

HI Experts,
I am updating a very important hierarchy which is used in many queries and in many Restricted key figures. Is it possible to find in which Restricted Key Figures this specific hierarchy is used??
Thanks in advance.
Meyling.

Hi
I was able to find a solution
I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases.
When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
year.
Tom

How to find out Max threads count for Custom Work Manager??

Hi All,
How to find out Max threads count for Custom Work Manager??
I have created 1 WM & targeted it to a cluster of 2 MS. Later I created Max thread Constraint = 300 & assigned that to my WM.
I need to check how many threads maximum were created by my WM after lets say 1 completed day.
The idea behind that is to understand if .. 300 is enough or need to increase the same way as we do it for JDBC datasource like.. Active connections Max count.. etc.
Any Idea?
regards,
Tanmay

Hi Ashish,
Thanks for your response.
The monitoring page that you are suggesting does not indicate the max thread count reached for a particular WM.
For example, If I have Sample WM with 300 Max Thread Constraint, is there a way for me to check how many threads have been used out of 300??
Any pointers in this regard are appreciated.
Thanks,
Tanmay

How to find Average transaction size and average number of transactions/sec

Would like to know
1. how to find average transaction size
2. number of transactions per sec
using SQL queries. We also have statspack installed.
Regards,
Anirban

SQL> select maxval,minval,average from SYS.V_$SYSMETRIC_SUMMARY where metric_name in ('User Transaction Per Sec');
MAXVAL MINVAL AVERAGE
.7 0 .149170735
SYS.V_$SYSMETRIC_SUMMARY have to many other metrics check the one you need. (10G and above)
Coskan Gundogar
http://coskan.wordpress.com
Edited by: coskan on Mar 31, 2009 12:42 PM

How to copy restricted key figures in query designer ?

hi,
i have created a query in query designer (BI 7.0).
How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
any ideas ?
best regards, Martin

Hi Martin,
Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
Hope that helps.
Regards
Mr Kapadia

How to find out what is the lock key for the computer

How to find out what is the lock key for the computer?

You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

How to show filter values of restricted key figures in BEx Analyzer?

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

How to Create a Restricted Key Figure in BO Webi Report

Hi Experts,
Please tell me How to Create a Restricted Key Figure in BO Webi Report.
Thanks in Advance.
Regards,
Rafi

Hi,
1. Define a new measure in the designer.
2. In the select clause give the reference to the key figure on which restriction to be applied.
For example
@Select(Key Figures\Number of Records)
3. In the where clause, give the MDX expression for the filter to be applied.
For example
<FILTER KEY="[0PURCH_ORG].[LEVEL01]">
<CONDITION OPERATORCONDITION="InList">
<CONSTANT CAPTION="HAS"/>
</CONDITION>
</FILTER>
Regards

How To Transport a Restricted Key Figures

Dear all,
can u plz tell me how to transport Restricted key figures for the first time.
i mean shall i create new package or shall i use the existing package only?
Regards
venu

Dear Venkat,
In qaulity the sales value for a week is showing correctly where as in the production the sales value is showing only for one material that to in the -ve...we have so many materials....
When i open a Query Designer in quality the system is giving a status message
[E865(RSO)]ERRORS: System is not set to Changeable - objects are not changeable
[b]When i click the documetaion on the error message the following is appearing:
Errors: System is not set to changeable - objects are not changeable [E865(RSO)]
Diagnosis
You want to change objects although the system setting is "Not Changeable".
System Response
The objects cannot be changed.
Procedure
Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4.
Venu

How can we restrict Key Figure in the BI System

Hi All,
Can any one explain How can i restrict key figures in BI system.
So when i create a query a specific user can only execute it if a specific key figure is a part of query otherwise he is not allowed to execute a query.
For Example:
A user TEST123 is allowed to execute a query with keyfigure Quantity he is not allowed to execute the query if any other key figure is present in the query
Regards,
Deepak

Hay Diogo,
Bravo...
Your suggetions always work for me. The scenario was that
A user TEST_PLD08 should only allow to see output for the querys which consist of the keyfigure PLDQUACMP and not for other keyfigures while other user TEST_PLD07 is allowed to see the output for querys consist of any of the keyfiguers.
so I have assign a authorization profile PLD_TEST07 to the user TEST_PLD08 with KeyFigures authorization as mentioned below and it is working fine
I EQ :
I EQ PLDQUACMP
You can forward me more scenarios like this if you can think of more it will be really helpful for me
Regards,
Deepak

How to create Calculated/Restricted Key Figures in AO

All,
In our project we are consuming Bex Queries for AO Analysis. In these we have lot of calculated/restricted key figures. In bex we can restrict 2 characterstics to one Keyfigure, So can we able to create calculated/restricted KF in AO
Regards,
John

Hello Tammy,
We are having a reqauirement in which we have 5 Bex queries built on the same infoporvider and we are trying to consolidate all the 5 queries to one single generic Bex query or two. So in AO we would like to consume this query and build different AO workbooks to meet all the old 5 queries requirement.
So as part of this process, I would like to know can we create calculate/restricted KF's in AO , that way i can make a better decision to create them in Bex VS AO.
Thanks for your inputs in advance.
Regards,
John
Message was edited by: sunny johnson

How to delete a restricted key figure in a multiprovider

Hi all
I used transaction RSZC (for the first time) to copy over restricted key figures from and info provider to a multi provider.
This worked but somehow it copied over each restricted key figure twice.
I have right clicked on the ones I don't want and clicked on delete but it doesn't delete them.
any ideas ?
thanks in advance

Thanks to you all for your help
It was my fault, I had them in structures that I'd copied over so that's why it wouldn't let me delete them.
I found this out when I used RSZDELETE, thanks for that
Sandra

How to find Average & Max of a Restricted key figure

Similar Messages

Maybe you are looking for