How to find brush adjustments?

Been using Lightroom for years. I've owned Aperture for a good while but I'm pretty new to using it.
My question is: How do I locate adjustments made with brushes? In Lightroom, there's just one local adjustment tool, and I can click it and see all the little "dots" on the photo indicating where I've brushed on an adjustment. Is there a way to do something similar in Aperture?
Specifically, I made some adjustments to a photo, and I think I'd like to delete one of them, but I can't figure out how to delete just that one. In some other photos, I'd like to see if I made any brush adjustments or not.
Thanks in advance,
Will

William Lloyd wrote:
There is no keyboard shortcut to switch between brush overlays, like the 'o' key in Lightroom. I sorely miss that. I would suggest you use Aperture's "send feedback" mechanism to suggest that. The more the merrier :-)
I checked Automator and AppleScript reference -- there is nothing there that (afaict) allows one any access to either the Brush HUD or any of the commands available from the Brush HUD. I also tried to get the commands by recording my actions with Keyboard Maestro -- nothing but the location of the click relative to the program window. Agree with William: "Aperture➞Provide Aperture Feedback".
That said, one of the _brilliant_ aspects of Aperture (imho ) is the constant and judicious subordination of possibility under what seems to me to be this rigorous test: does this lead directly to _useful_ feedback? Aperture is almost always and almost everywhere consistently image-centric. It is not about using a computer, or about what you can do -- it does not give you digital wings that allow for intellectual flights of fancy. (A "soft" example: a preponderance amount of the controls in Photoshop are dedicated to making and refining selections, which must be done prior to acting on the selection. Aperture's selection tools are, in comparison, either radically reduced or irresponsibly under-developed. I go with radically -- intelligently, deftly, logically -- reduced to those that work for a photographer developing digital photographs to be seen by human viewers. I _love_ that human/humanist core. It is not a scientific tool -- it is an artistic one. {When I do science, I use Photoshop.}) I do not want to see this pointed purposefulness undercut by features which crowd the user with secondary information.
The hierarchy in this case is that using/disabling an already-made adjustment (via the checkbox on the Brick) is more important, and closer to the user than examining the shape and depths of the adjustment mask. The question the user is supposed to ask is -- again, strictly imho, from years spent working with this software -- "How does the Image look?" (and not, "What's the adjustment mask cover, not cover, look like, etc.). It is conceivable -- and important to realize -- that one could make the most of the adjustment brushes without _ever_ seeing any of the brush masks.
OK. Turning off my own mic now.

Similar Messages

How to find out the PATTERN, GRADIENT and BRUSHED objects?

How to find out the PATTERN, GRADIENT and BRUSHED objects information in illustrator active document file. And also how to find the CMYK and RGB color information in illustrator file through javascript. Could you please provide any examples.

I tried using the below code. But for both "cmyk" and "grayscale" pattern it gives only CMYK. Kindly check and advise.
Code:
var docRef = activeDocument;
for(var i=docRef.inkList.length-1;i>=0;i--){
var inkRef=docRef.inkList[i];
var inkRefName=inkRef.name;
alert(inkRefName);
alert(inkRef.inkInfo.kind);
Thanks for looking into this.

Very slow export on images containing brush adjustments

I'm currently on the trial version with Aperture and I enjoy the software so far. One quite annoying issue is that it seems that images containing brush-adjustments take ages to export into any format. When exporting the images to PS4 it hangs totally.
Images with only global adjustments export just fine. Also drag/drop an image (even with adjustments) out of Aperture onto the desktop for example works perfectly fine with no issues. Exporting the same into a smaller jpg onto the desktop takes minutes.
I did all the usual fixes, like deleting .plist files, rebuilding/repairing libraries and so on, but nothing did the trick.
Does anyone have an idea how this could be fixed?
update: and yes... I do have the feeling that this is a newer problem. Can it be related to the "pro-application" update recently? Because I have the feeling that prior to that it worked just fine...
Message was edited by: jarvikarhu2

Pls post your portal Version. Couple of indexes were missing in
3.0.8 version.

How to find ANGLE B/W two edges in Oracle Spatial

How to find ANGLE B/W two edges in Oracle Spatial. I have two edge connected on same node. I wanted to know the angle betwwn them. Can somebody help me out????

Ok. My first example was an approximation. The farther you get north or south of equator, the more inacurate it gets.
This one should do the trick with some degree of accuracy.
declare
PI constant number := 3.14159265358979;
g1 sdo_geometry;
g2 sdo_geometry;
g3 sdo_geometry;
angle1 number;
angle2 number;
FUNCTION POINT(P_LAT IN number
                ,P_LONG IN number)
    RETURN MDSYS.SDO_GEOMETRY IS
BEGIN
    -- we load both the ordinate array and the point type because some spatial functions show inconsistent behavior
    -- it is not important for this example, just something to be aware of
    return(mdsys.sdo_geometry(2001,8307 -- WGS84
                             ,mdsys.sdo_point_type(p_long,p_lat,null)
                                                  ,mdsys.sdo_elem_info_array(1,2,1)
                                                  ,mdsys.sdo_ordinate_array(p_long,p_lat)));
END;
begin
-- For the example, project in WGS84
-- g1,g2,g3 could also come straight out of the database as sdo_geometry
g1 := point(50, 7);          -- Point A
g2 := point(51, 7);          -- Point B
g3 := point(50,10);          -- Point C
angle1 := atan2(g2.sdo_point.x - g1.sdo_point.x,
                  g2.sdo_point.y - g1.sdo_point.y);
angle2 := atan2(g3.sdo_point.x - g1.sdo_point.x,
                  g3.sdo_point.y - g1.sdo_point.y);
-- depending on rotation and where we are on the planet, adjustments may be needed
if angle1 < 0      then angle1 := angle1 + 2 * PI; end if;
if angle2 < 0      then angle2 := angle2 + 2 * PI; end if;
if angle2 < angle1 then angle2 := angle2 + 2 * PI; end if;
dbms_output.put_line('Angle between the lines A-B and A-C: '||
                       round(sdo_util.convert_unit(angle2-angle1,'Radian','Degree'),1));
end;
Angle between the lines A-B and A-C: 90

Discoverer Report: How to find Business Area name from Report Name.

Hi
I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
So I know Report name but don’t know which Business Area it belongs to.
How to find Business Area Name from Report Name?
Cheers
Vijay

Hi,
There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
select distinct doc_name, obj.obj_name folder_name, bas.ba_name
from eul_us.eul5_documents doc
, eul_us.eul5_elem_xrefs xref
, eul_us.eul5_expressions exp
, eul_us.eul5_objs obj
, eul_us.eul5_ba_obj_links bol
, eul_us.eul5_bas bas
where xref.ex_from_id = doc.doc_id
and doc.doc_name = &your_report
and xref.ex_to_id = exp.exp_id
and obj.obj_id = exp.it_obj_id
and bol.bol_obj_id = obj.obj_id
and bas.ba_id = bol.bol_ba_id
Rod West

How to find a specific word in sentence in each line?

How to find a specific word in sentence in each line and output will show start from the beginning from specific word plus with small description from each sentence?
For example: I need to find a "+Wednesday+" and "+Thursday+" word in each sentence by line by line from "myfile.txt".
Go ballet class next Wednesday.
On the Wednesday is going to swim class.
We have a meeting on Thursday at Panda's.
Then it will show the output:
Wednesday : ballet class
Wednesday : swim class
Thursday: meeting at Panda's
I am going to figure out in Java console to read from a file for specific word from each line and how to make it output in correct way. I know already to make input/file codes.

I got it and understand much better. Thank you very much. There is a problem with it because I knew how to make
a specific word in sentence but how I should make Output for specific word and some words from sentence.
For example:
Input:
+"On Thursday go to ballet class"+
+"Swim class on Friday one time a month at 2 p.m."+
I used the codes for that:
class FindSchedule{
     String firstline = "On Thursday go to ballet class ";
     String secondline = "Swim class on Friday one time a month ";
     FindSchedule(){
          System.out.println(firstline + findTheIndex("Thursday", firstline));
          System.out.println(secondline + findTheIndex("Friday", secondline));
     public int findTheIndex(String word, String sentence){
          int index;
          index = sentence.indexOf(word);
          return index;
     public static void main (String[] args){
          new FindSchedule();
}The output will be:
Thursday: ballet class
Friday: 14:00 swim class one time a week
Notice that time is changing in output complete different from input.
I need to find out how to extract some words from each sentence for output. Do you know how to do it?

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type          : Report                                 *
*****& Title                 : Z_ABAP_TCODE_MONITOR                   *
*****& Transaction code      : ZTCODE_USAGE                           *
*****& Developer name        : Shailendra Kolakaluri                  *
*****& Deveopment start date : 26 th Dec 2011                         *
*****& Development Package   : ZDEV                                   *
*****& Transport No          : DEVK906086                                       *
*****& Program Description   : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
      fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      layout TYPE slis_layout_alv,
      variant TYPE disvariant,
      events TYPE slis_t_event WITH HEADER LINE,
      heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date   TYPE swncdatum,
user   TYPE swncuname,
mandt     TYPE swncmandt,
tcode     TYPE swnctcode,
report TYPE swncreportname,
count     TYPE swncshcnt,
END OF zusertcode.
*data   : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode,
      wa           TYPE zusertcode,
      t_ut         TYPE STANDARD TABLE OF zusertcode,
      wa_result    TYPE zusertcode,
      t_result     TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      ASSIGNDSYS    = 'DEV'
      periodtype    = 'M'
      periodstrt    = month
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
    wa-user = wa_usertcode-account.
    IF wa_usertcode-entry_id+72 = 'T'.
      wa-tcode = wa_usertcode-entry_id.
      wa-report = space.
    ELSE.
      wa-tcode = space.
      wa-report = wa_usertcode-entry_id.
    ENDIF.
    COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'DATE'.
fcat-seltext_l   = 'Date'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'MANDT'.
fcat-seltext_l   = 'Client'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'USER'.
fcat-seltext_l   = 'User Name'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'TCODE'.
fcat-seltext_l   = 'Transaction Code'.
fcat-key         = 'X'.
APPEND fcat.
ENDFORM.
*&      Form SET_LAYOUT
      text
--> p1        text
<-- p2        text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
--> p1        text
<-- p2        text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM.                    " GET_EVENT
**&      Form GET_COMMENT
      text
--> p1        text
<-- p2        text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM.                    " GET_COMMENT
**&      Form top_of_page
      text
--> p1        text
<-- p2        text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary       = heading[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
*ENDFORM.                    " top_of_page
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = fcat[]
      i_save             = 'A'
      is_variant         = variant
      it_events          = events[]
    TABLES
      t_outtab           = t_ut
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " DISPLAY_DATA

How to find out the person who did a transport.

How to find out the person who did a transport.
There are 3 basis admins in our Org.
so is there a way of tracing out , who did what transport.
Regards,

- Goto import Overview (STMS)
- Import Queue
- Select DEV req (goto Import History)
- Edit - Display More
It will show the user who did the transport
Rgds

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to find out web-inf path from the physical drive?

How to find out web-inf path from the physical drive?
I have some user profiles in web-inf directory.SO I want to know the path from root directory like
d:/program files/allaire/jrun/appname/web-inf/profiles/username like that.
Presently I am able to get the path upto the application directory and from that I am concatinationg web-inf/profiles/username .
But it is giving problems when it is deployed under unix or linux.Because web-inf there it treats as WEB_INF
SO I want to get the path of web-inf directory with out hard coding.
Thanku

String path = application.getRealPath("/WEB-INF/profiles/username");
Note sure why you need this, but you don't need the real path to read the file - you can get an InputStream using the relative path. See ServletContext getResource() and getResourceAsStream().

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

How to find out list of variants in TVARV table

hi!
can anybody can guide me on the following issues? plz
How to list all variants in TVARV table?
How to find out any Z* programs that writes to TVARV table, using the variant name?
How to find out the programs which are reads the TVARV data into a program variant?
Thanks & Regards,
vijay

Or some help might be useful:
http://help.sap.com/saphelp_47x200/helpdata/en/c0/98037ae58611d194cc00a0c94260a5/frameset.htm
Regards,
Subramanian V.

How to find out list of users who have access to particulat SID

HI
How to find out the list of users who has access, to a particular SID?
Satish.

jurjen,
Thanks for replying, actually i was trying to navigate and execute the report using, SUIM...
could you help me to find out the list of users who has access to a particular system.. using SUIM.
satish.

How to find brush adjustments?

Similar Messages

Maybe you are looking for