How to find built-in functions for PL/SQL
Hi everyone,
Please can someone help me, I am running version 8i, and I am trying to find out how I can access all the built-in functions for PL/SQL.
I am new in ORACLE environment and I just want to know all the built-in functions and their usage.
Thanks
Maikiki1
null
Use the 'Documentation' selection on the left side of the OTN page.
All of the documentation for Oracle is available.
You can also purchase the documentation CD-ROM from the Oracle Store.
The functions are explained in the SQL reference manual.
null
Similar Messages
-
How to find suitable( existing) function group for a Function Module ?
How to find suitable( existing) function group for a Function Module to be created?
This is FM for converting amounts to text.Hi,
If you are not sure into which Function group your FM should go in then its advised to create a Function group of your own. Its not advised to create a function module in any other function group unless its owned by you since your FM can get deleted by others or it can get changed.
Create your own Function group. But if you want to create in an existing FG then best way is to find out the Function Group by searching for suitable existing Function module then see their function group
Regards,
Sesh -
How to find next number range for project definition in tcode CJ20N
Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil -
How to find classtype and class for a material.
Hi,
How to find classtype and class for a material.
which table contains this data.
Thanks
KiranHi Kiran,
Check below sample code. Use this BAPI which will give all info about the class for the material.
DATA: l_objectkey_imp TYPE bapi1003_key-object
VALUE IS INITIAL.
CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
VALUE 'MARA',
lc_classtype_imp TYPE bapi1003_key-classtype
VALUE '001',
lc_freight_class TYPE bapi1003_alloc_list-classnum
VALUE 'FREIGHT_CLASS',
lc_e TYPE bapiret2-type VALUE 'E',
lc_p(1) TYPE c VALUE 'P',
lc_m(1) TYPE c VALUE 'M'.
SORT i_deliverydata BY vbeln posnr matnr.
CLEAR wa_deliverydata.
LOOP AT i_deliverydata INTO wa_deliverydata.
REFRESH: i_alloclist[],
i_return[].
CLEAR: l_objectkey_imp.
l_objectkey_imp = wa_deliverydata-matnr.
*Get classes and characteristics
CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
EXPORTING
objectkey_imp = l_objectkey_imp
objecttable_imp = lc_objecttable_imp
classtype_imp = lc_classtype_imp
* READ_VALUATIONS =
keydate = sy-datum
language = sy-langu
TABLES
alloclist = i_alloclist
* ALLOCVALUESCHAR =
* ALLOCVALUESCURR =
* ALLOCVALUESNUM =
return = i_return
Thanks,
Vinod. -
How to find out the Tcodes for the exits
Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
EXIT_RFEKA400_001
EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
USEREXIT_FIELD_MODIFICATION
USEREXIT_MOVE_FIELD_TO_VBAK
USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
HISTORICAL_VALUES
MD_ADD_ELEMENTS
MD_CHANGE_MRP_DATA
MD_PIR_FLEX_CONS
MD_PLDORD_POST
ME_REQ_POSTED
NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PMi have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong! -
How to find the text id for the text in the sales order
Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh KumarU can fetch the texts for the items using
Read_text.
Example:
g_f_tdname = xvttp-vbeln.
g_f_obj = p_obj.
g_f_langu = 'DE'.
REFRESH g_t_lines.
CLEAR g_t_lines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = p_var
language = g_f_langu
name = g_f_tdname
object = g_f_obj
TABLES
lines = g_t_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards -
How to use Spell-check functionality for textbox (like Orkut, gtalk)
How to use Spell-check functionality for tex Hello Friends,
I am working on a JSP application. I wanted to add Spell check for text box like we have here, when we post a message. It automatically shows red line under the word, when ever spelling is wrong. Please tell me how I can do this. If possible, the code too.
Thanks.I believe the spell checking you see here, or on any other site, is the spell checking built into Firefox. At least that's what I see. Are you using Firefox?
-
How to find Exits in Function Module & BAPI
Hi,
How to find exits in Function Module & BAPI.
Thanks In advanceHi,
i ve a standard FM IDOC_INPUT_SALESORDER_CREATEFR which creates sales order using BAPI (inbound process).
Now my requirement is to check for some custom segment field if its not initial i ve to change item category field in line item for sales order.
could u pls help me in this.
Thanks in advance. -
How to find out the Functional module related to a T-code
Hi All ,
Please tell how to find out the Functional module related to a T-code.
i want it for the T-code RSZDELETE.Hi
There is no direct way to see this.
You need to Pick the Program(Se37/38) and tables (SE16/11)and to see where its been used
The FM for RSZDELETE is RSZ_DB_COMP_REORG_AS_POPUP.
Hope it helps -
How to find the supplying plant for a purchase order
Hi Guru,
My requirement is to dispaly the suppling plant and some other fields for the purchase orders using ALV report.
Could any one help me how to find the supplying palnt for a purchase order.
Suggest me any function module or with sample coding
Regards
PaulHi Ravi,
You are solution is right but in that table the supplying plant is not updated
Could you suggest me any other tables
Regards
Paul -
How to find the WhereUsed List for a Business Object Event?
How to find the WhereUsed List for a Business Object Event?
Can anybody let me know how to get which
Whereused function will get the data from
different Werks in multi-level?
Any sample program please!!! -
How to find the ASCII value for an alphabet.
How to find the ASCII value for an alphabet.
How can I get Ascii value of any letter
How can I get Ascii value of any letter. Is there any function?
This is how you do it :
report demtest.
data : c.
field-symbols : <n> type x.
data : rn type i.
c = 'A'.
assign c to <n> casting.
move <n> to rn.
write rn.
This will convert 'A' to 65.
Tom Demuyt
How to convert ascii value to character.
If I give input as 65 (ascill value) I want display 'A'.
Below logic is for convert from character to ascii value , now I want to know how to convert ascii value to character.
Naveen
report demtest.
*going from A to 65
data : c value 'A'.
field-symbols : <n> type x.
data : rn type i.
assign c to <n> casting.
move <n> to rn.
write rn.
*going from 66 to B
data : i type i value 66.
data : x type x.
field-symbols : <fc> type c.
move i to x.
assign x to <fc> casting type c.
move <fc> to c.
write c. -
How to find the BTE event for FBCJ transaction code
Hi All,
i need to find the BTE event for Finance related transaction codes.i checked in the SWEL transaction code, didnt find any event triggered and the standard BADI doesnt suite my requirement.The transaction code which i tried is FBCJ.can anyone help me how to find the BTE event for the above mentioned transaction.
Thanks in Advance,
lokesh kumar.KHello Lokesh,
The following is one of the process of finding a BTE and implementing it.
(1)Goto transction FIBF .Execute it with Attribute type = 'A'. Then in the menubar Environment->Info System (P/S )
Go through the list of BTE's available with the description available beside.
(2)Select the BTE you want to implement.
(3)Press button Sample function module
(4)This brings you to SE37 - Copy the sample function module to a Z-function module (First create a new function group for the function module) . Note: The name of the Z-functionmodule is not important
(5)Edit the code in the new function module
(6)Go back to transaction FIBF - Menu Settings->Products -> Of a customer and create a new product whicj identifies the new product . Remember to mark the Active field.
(7)Go back to FIBF menu Settings->P/S function modules->of a customer - Create an entry that links the BTE and Product with the new function module
Hope this will help.
Regards,
Samson -
How to Use the language function for assignment and validation
Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
ArnabHi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.
Maybe you are looking for
-
After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as in
-
Multiple BP for same vendor in SAP SRM
Hello SRM experts, We have an issue in our SRM 7 system where in during the replication of vendor from backend, the system has generated two BP numbers for one vendor in the backend. We are not sure of how and why this was generated. Ex: BP no Ve
-
Export Excel to forms Adobe Acrobat
I searched for this since it seems like a common question. I found add on programs on a google and the reverse questions on this forum. I have a lengthy excel sheet that I want to get into Acrobat Pro and have it recognize the cells so that I don't h
-
I bought a Thermaltake Volcano 7+ HS&F, and noticed it has a silicon based thermal compound, however it is in a powder form. (presumably you mix with water?) Is it better to by a different compound paste or is it fine to use the powder stuff they pro
-
I installed a new USB External SoundBlaster Li've 24 bits and to my surprise I can not select 24 bits. Software tells me about the bandwith limitation of USB .. But the card is plugged in USB 2.0 slot. I did not find an upgraded driver for this devic