How to find bulk storage type

hi,
i have working on blocking bins in bulk storage type in LX05, i didnt able to find out the bulk storage type out of my all types.
how to figure out the bulk storage type out of all types.
regards
muthuraman.d

Hi
check
SPRO>Logistics Execution>Warehouse Management>Master Data>Define Storage Type
In that for Bulk storage type the putaway strategy will be 'B'(Bulk storage)
You can also check in
SPRO>Logistics Execution>Warehouse Management>Storage Units>Strategies>Define Bulk Storage Area
Regards
Amuthan M
Edited by: Amuthan M on Feb 2, 2010 10:22 AM

Similar Messages

MLGT - How to find the Storage Type

Hello,
I have been trying to use MLGT to find the storage type but I have discovered this table does not have all the records. For example - I know that material AAAAAA using Wharehouse number BBB should show CCC for Storage type but when I look in MLGT I see that AAAAAA does not have a record that uses wharehouse number BBB. When I look in MM03 I see that the material has CCC for the storage type.
Does anyone know why this table would not have all the records? Is there a better table to get the storage type?
Thanks,
Matt

I am not able to catch what you try to achieve.
MLGN-LTKZE is just an indicator. if it has the name of a storage type, then either by design or just by chance.
SAP takes this indicator to lookup the placement strategy. (setup in trx OMLY).
There you can see all possible storage types.
A storage type view at a material master is almost only needed if you use fixed bin strategy. then you can specify the fixed bin per storage type in a material.

Replenishment From SU Managed Bulk Storage Type

Hi Experts,
We are trying to implement Immediate TO Creation Random Bin Management from a SU Managed Bulk Storage Type.
Our scenario is the following:
We have a SU Managed Bulk Stype: Stype 702
We have a SU Managed Stype with Putaway Strategy "P": Stype 701
We have material 11000026 and we define the following in WM View 2:
Max Qt: 6000
Min Qt: 2000
Replenishment Qt: 3000
Whenever a delivery TO from 701 is confirmed, and the stock level of material 11000026 in SType 701 drops below the Min. Qt, we need the system to immediately generate a replenishment TO: 3000 kg from Source SType 702 to Destination SType 701.
So far we have done the following:
Created a WM.Mov.Type 721, for which Manual TO creation is not allowed and with Ref.Stor.type Search 721.
We defined Replenishment Control for SType 701: with Replenishment Mov.Type 721 and Replenishment Technique 2.
Created SType Indicator with Operation A and Ref.Stor.type Search 721; in the sequence the first and only SType is Stype 702.
We assigned the SType Indicator to Material in WM View 1.
Whenever we actually confirm a delivery TO from 701 and the stock level drops below the min Qt., the system is not generating the immediate TO. What is the correct configuration or how can I achieve our request?
(The configuration described above works perfectly between STypes that have both the same Putaway Strategy, "P")
Thank you,
Leonidas Oyaga

Hi Mihailo,
Just tried running Tx. LT0R. I get Error Message No. L3009: "no destination storage bin to be found in storage type 701."
(Before doing this, I deleted ID Point 711 from SType 701).
I believe the issue is related to the relationship between SU Managed Bulk SType (702) and SType 701. In 702 stock in a storage bin can be identified based on the SU. However, when creating the TR or OT the system is not able to find a destination storage bin because the quantity taken from a storage bin in 702 is greater than the max quantity allowed in a single storage bin in 701. As if when picking the quantities it is trying to deliver the whole quantity to a single storage bin instead of transfering each SU (1000 KG per SU) to a different storage bin.
For Instance:
Material 11000026 Stype 701
Min Qt: 2000
Max Qt: 6000
Replenishment Qt: 4000
Storage Bin Capacity in 701: 1000
When stock level drops belowe Min. Qt, and the system tries to do replenishment from 702 by delivering 4000, the system is not able to find a storage bin in storage type 701 because it excedes the storage bin capacity.
Best Regards,
Leonidas Oyaga

[WM] Putaway strategy for bulk storage type SU-managed

Hi Gurus,
I need your help
I have a Bulk storage type with SU-managed. I would undestand the real behaviour of putaway strategy B.
1) Case 1: assume that in bulk storage type there are the followed bins (rows):
- in bin XX1 there is material AAA
- Bin XX2 is empty
In this situation if i receive material AAA, putaway strategy B chooses the bin XX1 by background processing - correct!
2) Case 2: assume that in bulk storage type there are the followed bins (rows):
- In Bin XX1 there is material AAA
- in Bin XX2 there is material AAA
- in Bin XX3 there is material AAA
In this situation if i receive material AAA, i don't undestand the behaviour of putaway strategy B. Seems that the system chooses in random way the bin (XX1, XX2 and XX3).
P.S: the storage unit type is one of default - E1.
Can you help me?
Thank very much

You told
Addn to Stock: X
Block upon placement: empty
Then How can you have Case 2?
In Bin XX1 there is material AAA
Next time also stock goes to XX1 only not XX2 unless you overwrite manually.
What does your block strage structure looks like? i'm sorry but i don't undestand your question.
Go to OMM4 "Define-Block struct." and look No. SUs for your St. bin type, SUT & Bulk stor Ind.

LT03 for Bulk Storage Types

Dear SAP-Experts,
we use ECC 6.0 with WM. First we create an outbound delivery with VL10a/VL01N, after that we create the TOs with the LT03. We are using storage units(SU) and one SU is one palett. When we create an outbound delivery with 2 paletts the system only created 1 TO. But I need 2 TOs. Is there something to change in the customizing? Should I use an User Exit?
A picture what the system is doing with a bulk storage type:
But this is what I need:
Thanks a lot.
Walter

Hi Walter,
I have never used the split profile in Bulk storage type earlier however i used TO split for other storage type and it works fine for me and i hope the same should work for bulk also. find below the setting which is required to define the TO Split
From the below node select --Define Profile
Define the profile for Performance Data
Select Profile for Transfer order splitting
Sort profile for TO splitting
in my opinion VLENR should work for you however there are multiple option available you can click on the match code button and have a look for other parameter
Define the movement type,Source storage type , Destination storage type and Profile for the TO split which was define in the above steps

Zero stock check for a bulk storage type

Hi Experts,
We have a requirement to do the zero stock check for a bulk storage type. As a standard SAP it is not allowed to do the zero stock check for a bulk storage type. Is there any way to do this?
Thanks & Regards
Sanpan

Hi Sanpan
I am in a similar boat.
We have a Bulk warehouse with storage types with 'B' putaway strategy. We would also like to instigate zero stock check but get the message Zero stock check not supported in bulk storage areas with storage units
Message no. LT246
Did you find a solution to this? Or have you coded a solution?
Many thanks
Adam.

How to find out which type of the driver is used in our application?

Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
Phoeniox

Hi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
               for(int i=0;i<drivers.size();i++)
                    Driver driver = (Driver)drivers.get(i);
                    String driverName = driver.getClass().getName();
                    System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath

How to find the Data Type of a column

Dear All,
How to find the Data Type of a Column dynamically in oracle Form.
Thanks and Regards,
Fazil
Edited by: user11334489 on Aug 25, 2012 9:06 PM

hi,
you can use get_item_property built-in
eg:
declare
l_item VARCHAR2(10);
begin
l_item := Get_Item_Property('item_name',DATATYPE);
end;

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

How to find the application type fora Script based on Form name?

Hi Guys,
            can anybody tell me how to find the Application Type and output type based on Form name and print program name?
I am having form name as: ZINVENT (INVENT is the actual) and program name as RM07IDRU.How can i find the Appliction ntype and OutType for entering into the NACE tr code.
                i tried thru TNAPR table but i was not able to find the Entry in the TNAPR with form Name and printprogram name
               Th Script is about Phsical inventory Documents.
Thanks,
Gopi.

You can use this...
REPORT Z_DUMMY_ATG NO STANDARD PAGE HEADING.
*======================================================================
* Tablas
*======================================================================
TABLES: TTXFP.
*======================================================================
* Tablas Internas
*======================================================================
DATA: T_TTXFP TYPE STANDARD TABLE OF TTXFP WITH HEADER LINE.
*======================================================================
* Selection-Screen
*======================================================================
SELECTION-SCREEN BEGIN OF BLOCK SCRIPT WITH FRAME.
SELECT-OPTIONS:
              PRINTNAM FOR TTXFP-PRINT_NAME,
              TDFORM   FOR TTXFP-TDFORM.
SELECTION-SCREEN END OF BLOCK SCRIPT.
*======================================================================
* Start-of-selection
*======================================================================
START-OF-SELECTION.
PERFORM SELECT_DATA.
PERFORM PRINT_DATA.
*&      Form SELECT_DATA
*       Seleccionamos los datos del reporte.
FORM SELECT_DATA.
SELECT TDFORM PRINT_NAME LAST_PROG
INTO TABLE T_TTXFP
FROM TTXFP
WHERE PRINT_NAME IN PRINTNAM
    AND TDFORM IN TDFORM
ORDER BY TDFORM.
ENDFORM.                    "SELECT_DATA
*&      Form PRINT_DATA
*       Imprimimos el resultado del reporte.
FORM PRINT_DATA.
FORMAT COLOR 3.
WRITE: 'Programa', 18 'Formulario', 50 'Flag de Ultimo programa'.
FORMAT COLOR OFF.
SKIP 1.
IF NOT T_TTXFP[] IS INITIAL.
SORT T_TTXFP BY PRINT_NAME.
    LOOP AT T_TTXFP.
      IF T_TTXFP-LAST_PROG EQ 'X'.
      FORMAT COLOR 4.
      WRITE:/ T_TTXFP-PRINT_NAME, 18 T_TTXFP-TDFORM, 60 T_TTXFP-LAST_PROG.
      FORMAT COLOR OFF.
      ELSE.
      WRITE:/ T_TTXFP-PRINT_NAME, 18 T_TTXFP-TDFORM, 60 T_TTXFP-LAST_PROG.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PRINT_DATA
Greetings,
Blag.

How to find the cube type ( aso/bso)

Hi all,
How to find/ know if the cube is ASO or BSO type.
I have no documents to know the history of the cube.
any help would be apprceciated.
thanks
Ram

In EAS when you look at the application Nodes, ASO apps have a red asterisk in the middle of the node.
In MaxL if you run a Display application statement, the column 'Storage Type' will return a '1' for BSO and '4' for ASO.
I think EAS should break them out and group separately. You can do this with custom views if you want, but I don't see the need for that. Simply having a group heading called ASO and BSO with appropriate apps under them would be a nice enhancement IMO.

How to find out the type of the value stored in a string variable?

Hi,
How do i find out the type of the value stored in a string variable?
for example,
I have a string variable str, in which the following type of values wil be stored
1) Intger
2) Long
3) boolean
4) Char
Is there any method to find out the type of the value, anything like str.getType()?. Please kindly help me. Thanks in advance.

Hi All, i'm sorry for the double posting, by mistake it occured.
Thanks for your replies, i have a string variable str, in which the value is stored and i have another string variable type, in which the type of the value is stored.
For example,
String str = "15";
String type = "Integer";
Is there any way to verify whether the value stroed in str is of type stored in the variable 'type'. I want to write a method of type boolean, it will throw true of the value stored in str is of type 'type'. Thanks

How to find out the type of the object ?

how would i find out the type of an object reference variable ?
it would be nice if there was some sort of getType() method that would return a string to tell me the type of the object -- just for testing purposes

try
Object.getClass().getName();
or just
Object.getClass().toString();
so something like this in your code:
Object obj = new Foo();
System.out.println(""+obj.getClass());
etc.

How to find a output type in bdc ?

hi guys ,
I am creating a report programe like calling two transaction like vl02n and lt31. for this i have write a code for bdc . for lt31 it is working fine .. when i am trying to call vl02n transaction there i have 3 output types. but according to requirement i need to find out of the out put type wat ev er i need? can any one please let me know how to do that ?
Thanks in advance.

hi max ,
thank you for your reply.. but my problem is not that.
CALLING FIRST SCREEN********
IT_BDCTAB-PROGRAM = 'SAPMV50A'.
IT_BDCTAB-DYNPRO = '4004'.
IT_BDCTAB-DYNBEGIN = 'X'.
APPEND IT_BDCTAB.
CLEAR IT_BDCTAB.
**********ENTER************
IT_BDCTAB-FNAM = 'BDC_OKCODE'.
IT_BDCTAB-FVAL = '=PRNT_T'.
APPEND IT_BDCTAB.
CLEAR IT_BDCTAB.
**********values *******
IT_BDCTAB-FNAM = 'LIKP-VBELN '.
IT_BDCTAB-FVAL = P_VBELN .
APPEND IT_BDCTAB.
CLEAR IT_BDCTAB.
CALLING SECOND SCREEN********
IT_BDCTAB-PROGRAM = 'SAPLVMSG'.
IT_BDCTAB-DYNPRO = '0200'.
IT_BDCTAB-DYNBEGIN = 'X'.
APPEND IT_BDCTAB.
CLEAR IT_BDCTAB.
IT_BDCTAB-FNAM = 'ROW_MARK(02)'.
IT_BDCTAB-FVAL = 'X' .
APPEND IT_BDCTAB.
CLEAR IT_BDCTAB.
CALLING THIRD SCREEN********
IT_BDCTAB-PROGRAM = 'SAPLVMSG'.
IT_BDCTAB-DYNPRO = '0100'.
IT_BDCTAB-DYNBEGIN = 'X'.
APPEND IT_BDCTAB.
CLEAR IT_BDCTAB.
**********ENTER************
IT_BDCTAB-FNAM = 'BDC_OKCODE'.
IT_BDCTAB-FVAL = '=STAR'.
APPEND IT_BDCTAB.
CLEAR IT_BDCTAB.
This is my code .. can you see the 'ROW_MARK(02)' here the system is going 2 nd output type. here i need to find the output type . the system is printing what ever in second row . but if my output type should any one row ? can you please tel me how to do that ?

How to find the message type for application

Hi Guys,
while postnig the data through idocs,we use message types
the issue is how can we find the massage type for application?
plzz help

You can find these in transaction WE82.
You can find in WE57, this basis type, which fm is attached (BAPI_IDOC_INPUT1).
Then check out transactions WE41 and WE42.
You can use the table EDIMSG, in SE16 to list all the msg types making use of the same IDoc.
or
If you want to get all the message types, you can use WE81.
If you want to see which message types are attched to a particular Idoc type, use WE82
check it in BD60 and WE57..

How to find bulk storage type

Similar Messages

Maybe you are looking for