How to find changes through transport request

Hi all,
I want to know whcih table and has been changed for that perticular transport request.
Regards,
Ramprasad

Hi,
Go to se09/se01. Open the request and check the objects under that TR.
If u want to know the exact changes then u can do a remote comparision between development and test system for each object underthat TR.
Thanks,
vinod.

Similar Messages

  • How to find out the transport request that a report is locked to?

    Hello Experts,
    I have to transport a report to production system.
    The report has already been assigned to a transport request.
    How do I find as to which transport request is the particular report assigned to.
    Any place where I can check for the locks on a report ?
    Any advice is very much helpful...

    Hello Venkat,
    Thanks for the prompt reply.
    Actually i had tried it. but unfortunately, NO request number is shown. The Only nessage i'm getting is
    " Source systems can not be transported."
    The report is opening in RRMX in change mode.
    This implies 2 things,
    1. The report is already assigned to a transport request. OR
    2. Its assigned to $temp.
    But if the report is stored as $temp, while tranporting in transport connection, it should ask for a transport request and also ask for the development class. Which is not happening
    Any other places to look for ?????

  • Factory calendor changes through transport request

    Hi,
    Is it the right way to move the factory calendor changes to golden client to quality to production clients through transaport request. Please guide me.
    Regards,
    Mastan.

    Hello
    Please take a look on the following note that describes the pre-requisites to transport a factory calendar:
    538344 - Transporting calendar dates
    Also consider the following points:
    The calendar can only be transported as a whole.
    The calendar transports work according to the motto: all or nothing.
    I.e. no keys are specified in the transport and the whole content of the tables is transported.
    It is not possible to select single calendars for transport.
    For all above reasons, when transporting the calendar, all existing entries in the target system will be overwritten.
    BR
    Caetano

  • How to find out programs transport request

    Hi all,
    Is there a way to find out from SE80 in which transport request the program can be found?
    Thank you in advance,
    Ville

    Goto Utilities -> Versions -> Version Management.
    If the program is in a transport request which is not released you can find it under 'Version(s) in the development database:'. Otherwise in 'Version(s) in the version database:'.
    Vinod

  • How to find out the Transport request (TR)

    Hi all,
    which is the table that stores all the Transport requests. (TR)
    Regards,
    Venkat

    hi,
    see both of these following  table
    E070 , E071
    and aslo see the following link
    [TR|Transport Request for Custom Table??;
    Regards
    Ritesh J

  • How to delete role through Transport Request

    Hi,
    when I am deleting Role it is Not asking me for transport request ..this is what i needed.can anybody solve my problem
    regards
    Gaurav

    Hi,
    Please check if your role is already locked under some Transport request. If so it wont pop up any TR.
    If it is locked under some TR, make sure you detach it from the TR and try again it will pop up a TR screen
    Please revert in case of issues
    Regards,
    Pramod

  • Hi guys,Explain how to find whether the user request is dialog or bc ...

    how to find whether the user request is dialog or bc or some other wp and where we can see that ?

    Hello Damodar,
    You can find out that in SM50.
    However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
    Regards.
    Ruchit.

  • Changeing the Transport request Attributes?

    Hi Guys,
                 Can anybody tell me how to Change the Transport request Text , means while creating a Request u will enter the Description for Each request.Can anybody tell me how to change that description?
                   Very Urgent.
    Thanks,
    Gopi.

    HI,
       You cannot change the text of a request if you are not the owner of that request..first change the owner of the request to your id and change the text.
    Thanks
    mahesh

  • How to find routine in transports to which Infosource/DS it belongs to?

    Hi,
    Please let me know how to find a routine of some info source in list of transports to which Info source it belongs to.

    HI,
    You can find this through Transport connection.Just drag the concerned IS into right hand side then All objects under that IS will be displayed.
    Tarak

  • Where i can find the deleted transport request in SAP development system?

    where i can find the deleted transport request in SAP development system?

    Hi,
    When you delete the transport request from SE10 , you can not find the request entry from E070 and E071.
    and only local change request are possible to delete from SE10 /SE09
    if you are try to delete the change request with target system then it's gives you the error that request cannot be deleted because it contains locked objects.
    It's not possible to find out the deleted request from SE10.
    regards,
    kaushal

  • How to assign a new  transport request for  a program saved in $tmp mode

    Hi  all,
    How to assign a new  transport request for  a program saved in $tmp mode?

    Hi,
    delete the object fro the package $tmp.
    go to change mode, save it.
    while saving it will ask for teransport id.
    thanks
    vinod

  • How to delete items in transport request

    How to delete items in transport request.  I have quite a lot data to be deleted.
    I click on TR5001. Then click to drill down to Table contents
       C001 
                Data A1
                Data A2
                Data B1
                Data B2
    Placed my cursor on Data A1 and tried deleting Data A1 by clicking on the item and right click then select delete but not able to delete with message "Message no. TK705, A request, task or object could not be deleted because the cursor was not positioned correctly".  . 
    Any clue to the error and any recommded solution?
    I just need to transport Data A2, Data B1 & Data B2. 
    Regards
    PSK

    Hi There,
    I dont have access to SAP as of now, Can you please reffer to these links and give feedback,
    [cursor Page|http://books.google.co.in/books?id=ASekwAiAXdMC&pg=PA250&lpg=PA250&dq=Positionthecursoronarequest,task,orobjectSAPtransport&source=bl&ots=BS7c1uNH0z&sig=dQZNp7UuXvqyHT9-otTbip8iF8U&hl=en&ei=_NBESr7CDsmGkAXX8MmsDw&sa=X&oi=book_result&ct=result&resnum=1]
    [SAP help|http://help.sap.com/saphelp_sm32/helpdata/EN/b6/b40613a44411d1846d0000e8a57770/content.htm]
    Thanks,
    Raja

  • Changing the Transport Request of an Object(Report)

    Hi,
    By mistake I have saved one of my Custom Transaction Code( of a custom Report) under wrong Ttransport Request Number.
    Could you please let me know the procedure to change the Transport Request number of any object like Report, TCode etc.
    Regards,
    Nitin

    Hello,
    Delete that perticular object from the request.
    And save that object again , so , system will ask you for the request again.
    Regards,
    Naimesh

  • How to Recover the Deleted Transport Request

    Hi,
    How to Recover the Deleted Transport Request (Customizing and Workbench).

    Hi Manoj,
    those thins will be done by BASIS people.
    for more info  chekc
    How to recover the deleted Request / task...
    hope it helps you.
    Thanks!

  • How to add config changes in Transport Request

    Hi Experts,
    We did some config changes in Logistics - General=>Material Master=>Configuring the Material Master=>Define structure of Data screen for screen sequence / Assign Secondary sequence / Maintain Order of Main and Additional Screens.
    But while saving this config of  Assign Secondary sequence / Maintain Order of Main and Additional Screens its not asking for Transport Request.
    Even i checked in the menu of EDIT-Tranport entries, but the menu's are in disable mode.
    Can anyone guide me how to add this two fields config changes in to TR?
    Thanks and regards,
    Anandhan

    Hi,
    This is really strage.
    However you can try the following.
    upon entering the config node, use the first menu option in which option "transport" would be there.
    Upon clicking it, the same table opens in display mode.
    Select the entries that you have created and use the option "include in transport"
    When asked for, provide teh transport number.
    Alternatively you can create a transport and them use SE10 to include entries from tables that you can select.
    ou may need teh help of an experinced ABAPer or Basis to do it if you are not confortable doing it yourself.
    However if the config effects multiple tables, then this is not a viable option as you need to know all the impacted tables.
    hope this helps.

Maybe you are looking for

  • Safari and Sound Notifications

    Hey all- Ive come back to Mac and am struggling with a coupla things. Safari's been challenging for a couple of good reasons. I don't see well, so my 15" MBP is usually zoomed in. When I bookmark a page, I can't see rgw dialog box. so hearing it yawn

  • Dump RAISE_EXCEPTION PARTNER_NOT_VALID

    Hi, Got a dump in production system.Dont know the cause.Please help in finding solution What happened?     The current ABAP/4 program encountered an unexpected     situation. What can you do?     Note down which actions and inputs caused the error.  

  • 4.01 is not compatible with Norton toolbar?

    I have used Firefox religiously for the last few years and have always been happy with the stability and reliability. But now I have installed the latest version only to find that it did not work with the Norton Toolbar and the Identity Safe in parti

  • Can not connect to Time Capsule hard drive when I am not on its network.

    If you can help me, I will be forever grateful! I had a airport extreme with a hard drive that I used to back up my computer and to access my files when I am on the road. (Everything worked perfectly) I switched to the Time Capsule. I am now unable t

  • Passing parameters to RFC iview

    Hi Can anyone let me know how to pass parameters to RFC iview ? i want to pass the parameter through URL to the RFC iview (funtion_params_name1) thanks