How to find CR Request Number inside a package

Hi Folks,
how to find the CR Request Number list present inside one package.
Reg,
Hariharan

Hi ,
i had gone through the Transaction se03 Search for Object in Request/Task, in the selection screen no option for Package can you just breaf about the Selection Screen Step.
Reg,
Hari.

Similar Messages

  • How to find out spool number from a jobname.

    Hi,
    If I know the jobname and jobcount how to find the spool number of it. Jobname and Jobcount are in table TBTCO and spool number is in TSP01. Is there any link between these tables.
    Your help will be appreciated.
    Thanks & Regards,
    Soumya.

    Hi,
    Check the below link
    [Re:Spool request;
    Regards,
    Surinder

  • How to find ThinkPad serial number if label is worn?

    QuestionI'm having some trouble with my T500 ThinkPad and want to contact service, but am not sure how I can find out the machine type and serial number to provide to support when I call because the sticker on the bottom of the laptop is faded so I don't know what the S/N is. I do have one number though: [serial removed] was what I copied down from it before it became faded. I dont know what to do now, so if you have any ideas, that'd be great.
    Answer 
    Generally the label with type and serial information is found on the bottom of laptops and tablets and on the rear of desktop systems and on the back or along the edge of displays.   As noted by the question asked above, in some cases, the label may become worn.  To reduce / avoid this, the type / serial label was relocated to the battery compartment on some systems with removable batteries, along with the Win 7 COA.  As Win 8 does not have a COA lable, and print technologies for labels have improved, most current systems have the label on the bottom.
    Some tablets may have the type and serial information label on the inside of memory door / SD card slot covers as was the case with the ThinkPad tablet type 1838/1839.
    Here is a link to an article on the support site with examples of label locations for different model Lenovo systems.   If the system will not power up at all, finding the physical label is the best course of action when contacting service.
    If the label is missing and the system will power up, there are several ways to easily find this information as it is written into the BIOS on the system board.
    1) Command Prompt
    Run an elevated command prompt, Enter the command "wmic bios get serialnumber" (without the quotations).
    2) BIOS
    Boot to BIOS (press F1 on startup) and the model type and serial number will be listed.
    3) Diagnostics - Lenovo Solution Center (LSC) or the prior Lenovo ThinkVantage toolbox.

    wmic bios get serialnumber  does not work !!!!all your pages about how to find a serial number are disfunctuional !!! What a bed service

  • How to find out the Number range object for Incident number

    How to find out the Number range object for Incident number ?
    CCIHT_IAL-IALID
    regards,
    lavanya

    HI, an example.
    data: vl_num type i,
          vl_char(6) type c,
          vl_qty type INRI-QUANTITY,
          vl_rc type INRI-RETURNCODE.
    CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        NR_RANGE_NR                   = '01'
        OBJECT                        = 'ZRG0000001'
       QUANTITY                       = '1'
      SUBOBJECT                     = ' '
      TOYEAR                        = '0000'
      IGNORE_BUFFER                 = ' '
    IMPORTING
       NUMBER                        = vl_num
       QUANTITY                      = vl_qty
       RETURNCODE                    = vl_rc
    EXCEPTIONS
       INTERVAL_NOT_FOUND            = 1
       NUMBER_RANGE_NOT_INTERN       = 2
       OBJECT_NOT_FOUND              = 3
       QUANTITY_IS_0                 = 4
       QUANTITY_IS_NOT_1             = 5
       INTERVAL_OVERFLOW             = 6
       BUFFER_OVERFLOW               = 7
       OTHERS                        = 8
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    vl_char = vl_num.
    write vl_char.
    Regard

  • How to find out the number of songs in my iTunes 11 library

    How to find out the number of songs in my iTunes 11 library

    Welcome to the Apple Support Communities
    To see the number of songs, go to View menu > Show Status Bar, so the number of songs you have will appear at the bottom of the iTunes window

  • How to find out asset number in SAP

    Hi,
    Please let me know how to find out asset number based on the depreciation document number.
    Regards,
    Bhaskar Suruvu

    In the FI document header text / line item text you found back the asset document number like:
    AFB01200900101-0000000001
    In the table ANLP you can found back the document number -0000000001
    On this way you can make the link

  • How to set request number of info package using start routine

    Hi All,
    I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
    Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
    Thanks
    Sangita

    You'll probably want to do this in a start routine.  It is probably not advisable to hard-code the technical name of the InfoPak.  They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
    I would do a SQL select like this in a start routine, and then filter based on the results of the SQL.  You'll probably want to sort the results by date and time, both descending.  Or do a MAX in the SQL.
    Please let me know if this isn't clear.
    select q~rnr q~logdpid q~tdatum q~tuzeit
    from rsreqdone as q
      inner join rsldpio as p
        on p~logdpid = q~logdpid
    where p~objvers = 'A'
    and p~logdpid like 'ZPAK%'
    and p~source = 'your data source'

  • How to find my serial number in downloaded logic pro X

    how to find my serial number in downloaded logic pro X

    There is no serial number for Logic Pro X

  • How to find ipod serial number on itunes?

    i need to find out what my serial number was for a stolen ipod. how can i do this on itunes?

    See:
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac

    I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac.

    How did you purchase Lightroom? Download? Package?
    Have you followed the instructions to verify that you qualify for academic discount?

  • How to find Error Reference Number Additional details in HFM

    <font color="Blue">
    Hi All
    How to find Error Reference Number additional details in HFM ?
    Example:
    Error Reference Number:{01977FBD-DB42-4655-99B5-4ABF38D3E082}
    Where to Find above id additional details??
    I mean HSVErrorLogViewer ? OR RegistrySettings ? OR Dcomcnfg ? OR any other way to find the detailed information?
    Any ideas? Appreciate your help in advance.
    Regards
    Taruni
    </font>

    Hi,
    try menu - EDIT - LUW debug
    and see if you can get the idoc number in this way
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • How to find out cellular number on ipad

    I have forgotten my cell number that m using for 3G on my ipad 2. Please let me know how to find out cell number on ipad 2

    Make sure that your Cellular Data button is turned on:
    CELLULAR DATA>CELLULAR DATA = ON
    Then the number should show up where Diavonex indicated above

  • How to find Outbound Idoc number from inbound Idoc number.

    Hi,
    I have one inbound Idoc in my system, then
    How to find the  idoc number from the system which sends that idoc(Outbound Idoc number).

    Hello
    You can use fm SREL_GET_NEXT_NEIGHBORS for this purpose.
    Scenario: An EDI purchase order is received by SAP-XI and forwarded as Inbound ORDERS IDoc to R/3. SAP-XI generates an (outbound) IDoc number which differs from the (inbound) ORDERS05 IDoc in the R/3 system.
    Calling fm SREL_GET_NEXT_NEIGHBORS with the following parameters:
    OBJECT-OBJKEY = <IDoc number, 16-digits>
    OBJECT-OBJTYPE = 'IDOC'
    MAX_HOPS = '99'            " <<< get all links
    I get the following result:
    0000000000133906                                   IDOC       CUSTOMER   OUTIDOC
    0000000000407402                                   IDOC                  INIDOC
    000000370383                                       BUS2012    CUSTOMER   OUTBELEG
    0010057944                                         BUS2032               INBELEG
    Outbound IDoc number
    Inbound IDoc number (ORDERS05)
    PO number
    Sales order (created from inbound ORDERS IDoc)
    Regards
      Uwe

  • Someone stole my 4th gen. Ipod touch and i don't know how to find the serial number... Can you track it?

    I dont know how to find the serial number and someone stole my i pod can someone track it?

    You can easily get the serial number.  Having it will not help you track it.
    iPod: How to find the serial number
    If you activated find my ipod on the ipod BEFORE it went missng, then you may be able to track it.
    Otherwise, you cannot track it.

  • HT2452 How to find the serial number of your Apple hardware product

    How to find the serial number of your Apple hardware product

    This works for any Mac provided that the logic board has not been replaced.
    I recently had the logic board replaced in my iMac. After the tech left (on site repair thanks to Applecare), I went to about the Mac and found jibberish numbers. I called Apple and the AASP and found that he had forgotten to register the serial number. So he came back and, with a special tool (as he called it - looked a little like a USB stick) he contacted Apple and then entered my original serial number as I read it to him.
    So, I assume they changed the process since I still have the same serial number as before.

Maybe you are looking for