How to find CREATION DATE of a REPORT VARIANT

Hi Friends,
How to find the Creation Date of a Report Variant?
Regards,
Viji

Hello Vijaylakshmi,
You can find the Date of the variant created from the table VARID.
Go to the table VARID, You can find the report name, Variant name, EDat(Date on which variant was created), you will also find the time stamp at which the variant is created.
Hope this helps.....
If you need any further information then please l;et me know. ....
Regards,
Kittu
Edited by: Kittu on May 20, 2009 8:04 AM

Similar Messages

  • How to find creation date of a cron job in RHEL 5

    We have instances having RHEL 5.10 in our setup. I wanted to know how to find the creation date of a cron job in RHEL 5. I was investigating a cron job, hence the query to know the creation date of a cron job.
    I hope my question is clear.
    Requesting a reply to my query.
    Regards

    Sorry to have upset you, but I cannot understand your accusation. Could you please explain where you see aggression in my problem evaluation or where I implied "how dare you"?
    I also provided an explanation why the cronfile in /var/spool/cron is not helpful. If I'm wrong, by all means, please let me and anyone else know.
    If no filesystem is specified I assume the default file system, which under OL 6 is ext4 and xfs under OL 7. Furthermore I was assuming ext3 due to other questions the OP has been asking in a similar context, which you may have not seen. For example: How to find creation date of a file in RHEL 5

  • How to find creation date of a file in RHEL 5

    We have instances having RHEL 5.10 in our setup. The file system type shown using
    df –T
    says that file system type is ext3.  The ls –ltr command seems to show the modification time but not created date.
    I hope my question is clear on how to find the created date of a file in Red Hat Linux.
    Requesting a reply to my query.
    Regards

    Hi,
    I agree with Dude.
    Also you can check the command find, this command has many options like:
    -atime n  
                  File  was  last accessed n*24 hours ago.
    -cmin n
                  File’s status was last changed n minutes ago.
    -ctime n
                  File’s  status  was  last changed n*24 hours ago.  See the comments for -atime to understand how
                  rounding affects the interpretation of file status change times.
    -mtime n
                  File’s data was last modified n*24 hours ago.  See the comments for  -atime  to  understand  how
                  rounding affects the interpretation of file modification times.¨
    Best regards

  • How to find creation date of a website in sun one webserver

    Is there any way we can find the creation date of a website or virtual site hosted on Sun One Webserver 6.0 (any sp).
    Thanks

    No. First I access a site (in my intranet ) and then try to get the last modified date :
    telnet vault.red.iplanet.com 80
    Escape character is '^]'.
    GET / HTTP/1.0
    HTTP/1.1 200 OK
    Server: Sun-ONE-Web-Server/6.1
    Date: Mon, 18 Apr 2005 06:03:08 GMT
    Content-length: 687
    Content-type: text/html
    Last-modified: Mon, 22 Mar 2004 21:47:32 GMT
    Accept-ranges: bytes
    Connection: close
    <html>
    <head>
    <title>The Server Formerly Known As Netscape Enterprise</title>
    <script language='JavaScript'>
    var curTab = 0;
    var tabSet = 1;
    var typGroup = 0;
    </script>
    <link rel="shortcut icon" href="/favicon.ico">
    </head>
    <frameset rows='110,*' frameborder='no' border=0>
    <frame src='/tabs.html' name='tabs' frameborder='no' scrolling='no' noresize marginwidth=0 marginheight=0>
    <frameset cols='200,*' border=0 marginwidth=0 marginheight=0 frameborder='no'>
    <frame src='/odds_ends.html' name='options' frameborder='no' noresize>
    <frame src='/header_index.shtml' name='content' frameborder='no' noresize marginwidth=16 marginheight=16>
    </frameset>
    </frameset>
    </html>
    Connection closed by foreign host.
    $ telnet vault.red.iplanet.com 80
    Escape character is '^]'.
    HEAD / HTTP/1.0
    HTTP/1.1 200 OK
    Server: Sun-ONE-Web-Server/6.1
    Date: Mon, 18 Apr 2005 06:03:17 GMT
    Content-length: 687
    Content-type: text/html
    Last-modified: Mon, 22 Mar 2004 21:47:32 GMT
    Accept-ranges: bytes
    Connection: close
    Connection closed by foreign host.

  • How to find the Date and Time of Modification of Column in aTable?

    Hi all,
    Do  you know how to find the Date and Time of Addition of Column to a Particular Table?.
    I know however, How to find the modification time of the Table. Using the below Query :
    Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
    Object_Name
    Last_DDL
    Employee
    20-Aug-2013 09:23:03
    I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
    Regards,
    Bhaskar M

    I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
    My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

  • Discoverer Report: How to find Business Area name from Report Name.

    Hi
    I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
    So I know Report name but don’t know which Business Area it belongs to.
    How to find Business Area Name from Report Name?
    Cheers
    Vijay

    Hi,
    There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
    However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
    select distinct doc_name, obj.obj_name folder_name, bas.ba_name
    from eul_us.eul5_documents doc
    , eul_us.eul5_elem_xrefs xref
    , eul_us.eul5_expressions exp
    , eul_us.eul5_objs obj
    , eul_us.eul5_ba_obj_links bol
    , eul_us.eul5_bas bas
    where xref.ex_from_id = doc.doc_id
    and doc.doc_name = &your_report
    and xref.ex_to_id = exp.exp_id
    and obj.obj_id = exp.it_obj_id
    and bol.bol_obj_id = obj.obj_id
    and bas.ba_id = bol.bol_ba_id
    Rod West

  • How to save the data of ABAP report into a notepad in desktop location???

    HI all,
    Can any one tell me how to transfer the data of ABAP report into a Notepad.
    Actually I have to schedule a ABAP report in background on daily basis and I want to transfer the
    whole record into Notepad.
    If any program is available for this..please clearify the relevent code for transferring.
    Thanks
    Rajeev

    declare a character type internal table.
    now move your data from it_data ( internal table with data ) into table itab.
    since you are running this report in background, you cannot save it to the desktop. Instead give any app server location
    data: itab(400) occurs 0 with header line.
    field-symbols: <fs1> type any.
    data: gv_file type rlgrap-filename default 'TEST.TXT'.
    data: gv_filepath type rlgrap-filename default <path>.
    LOOP AT it_data.
        DO 100 TIMES.
          ASSIGN COMPONENT sy-index OF STRUCTURE it_data TO <fs1>.
          IF sy-subrc = 0.
            CONCATENATE itab <fs1> INTO itab SEPARATED BY ' '.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
        SHIFT itab LEFT DELETING LEADING ' '.
        APPEND itab.
        CLEAR itab.
      ENDLOOP.
      concatenate gv_filepath '/' gv_file into gv_file.
      OPEN DATASET gv_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc = 0.
        LOOP AT itab.
          TRANSFER itab TO gv_file.
        ENDLOOP.
        CLOSE DATASET gv_file.
      ENDIF.

  • How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

    Hi All,
    We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
    Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

    Hi,
    Here you go..
    1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
    Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
    2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
    3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
    This step you get query reference sheet or column or query general UUID for next step.
    4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
    Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
    Hope this helps.
    Please keep in mind, it might take more time depends on how many query elements you have in the system...
    Comments added for better DB performance by: Arun Thangaraj

  • How to find the data loaded from r/3 to bw

    hi
    how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild  and table the data is comming from . plz help
    thanks in advance to u all

    Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
    So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
    As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
    Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
    Good job
    GFV

  • How to find the Data Type of a column

    Dear All,
    How to find the Data Type of a Column dynamically in oracle Form.
    Thanks and Regards,
    Fazil
    Edited by: user11334489 on Aug 25, 2012 9:06 PM

    hi,
    you can use get_item_property built-in
    eg:
    declare
       l_item VARCHAR2(10);
    begin
       l_item := Get_Item_Property('item_name',DATATYPE);
    end;

  • How to find Archive data In SAP

    Hi experts ,
    How to find Archive data in SAP throught the following tcodes FTWL & AS_afb.
    Thnx
    Venky

    Hello,
    Transaction FTWL is for the DART files (not actually archived data) that are stored in your archive server.  In order to run a query, or browse the DART file, you would need to "Import from archive" from within FTWL and then browse the file.
    I am not sure what you mean by AS_afb.  Please provide more information.
    Regards,
    Karin Tillotson

  • Step- by- Step on How to Load Excel data into Crystal Reports?

    Hi Friends,
                      Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
    Vijay

    It's also important to 'prep' the excel file prior to connecting to it.
    Give the data tab a meaningful name
    Make sure the column headers are unique and that every column has a header
    Delete any blank tabs
    If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text.  You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
    Schema.ini example:
    200912PUSD.csv
    ColNameHeader=True
    Format=CSVDelimited
    MaxScanRows=25
    CharacterSet=OEM
    Col1=SSN Char Width 9
    Col2=LAST_NM Char Width 25
    Col3=FIRST_NM Char Width 25
    Col4=DOB Date
    Col5=STDNT_ID Char Width 10
    Col6=SORTKEY Char Width 10
    Col7=SCHOOL_NM Char Width 30
    Col8=OTHER_ID Integer
    Col9=GRADE Char Width 2
    The filename in the first line needs to have the []  brackets around it, but I couldn't get it to display in this forum correctly.
    Edited by: Eric Petersen on Jan 27, 2010 9:40 AM

  • How to find the date my iPhone 4s was manufactured

    Hi, Please can anyone tell me how to find the date my iPhone 4s 64gb was manufactured. I have the serial and i-m-e numbers. For some reason my Insurance company want to know, all I wanted to do was add the phone to my all risks policy. Thanks in advance for any advice.

    That's all you will get, there is no way to know the manufactured date only the warranty status from date of original sale and it is most unlikely your warranty is still "good" on an iPhone 4

  • Could someone tell me how to find purchase date so I can register

    Could someone tell me how to find purchase date so I can register my Airport extreme on the Apple Support Profile page?

    Unless something has changed, the Apple does not provide a specific support warranty for their AirPort products. Instead, typically, you would get this type of warranty only if your purchased an Apple desktop or laptop at the same time and the AirPort would be covered under that one.
    If you bought the AirPort directly from Apple, they should have a copy of the receipt. Otherwise, if you used a credit card, check with your card provider.

  • How to find login Date of a user

    Hi,
    Can someone please tell me how to find the date when a user logged into the messaging server.
    What i am actually trying to do is as follows : I wan't to disable the account of a user if he does not access his mailbox for some time period.
    The login date & time of a user can be seen from the logs but is there some other place/file where this is available?
    Regards,
    Shveta.

    The logs are the only place where this information is available, currently. We are going to address this in a future release of the mail server. I can't provide detailed specifics, but know that things will get better in future versions.
    Regards,
    Chad

Maybe you are looking for