How to find data base tables
hi,
can u guys help me how to find which database tables have been used, for the infocubes and info objects............only in bw side
Hi Preethi,
Please find some tables regarding Objects in BW side..
Go to Se11 and give the table name..
RSDCUBEIOBJ Objects per InfoCube (where-used list)
RSDODSOATRNAV InfoObject in ODS (navigational attributes)
RSDODSOIOBJ InfoObject in ODS
RSDIOBJT InfoObject texts
RSDIOBJ Directory of all InfoObjects
RSDKYF Key figures
RSDBCHATR Master data attributes
RSBBSQUERYDIR BW: Directory of the Query Sender
RSBBSQUERY BW: Query Receiver
RSBBSQUERYT BW: Texts for Query Receiver
ROMSDIOBJ BIW: Assignment of master data attributes to InfoObjects
RODCHA BIW: InfoObjects / characteristics
RODIOBJCMP BIW: InfoObjects / compounding
RODKYF BIW: Key figures
ROAPPLT BIW: Name of the application components
RSUICDONE BIW: Selection table for user-selection update ICs
RODTIM BIW: Time characteristics
RODUNI BIW: Units
RSIST InfoSource texts
RSIS InfoSource (transaction data)
RSISOSMAP Mapping Between InfoSources and OLTP Sources
RSOSFIELDMAP Mapping Between OLTP Source Fields and InfoObjects
RSUPDDAT Update rules key figures
RSUPDKEY Update rule: Key per key figure
RSUPDROUT Update rules - ABAP routine - check table
RSRWBINDEXT Titles of binary objects (Excel workbooks) in InfoCatalog
RSRWORKBOOK 'Where-used list' for reports in workbooks
RSDDIME Dimensions directory
RSDDIMEIOBJ InfoObjects per dimension (where-used list)
RSDDIMET Dimension Texts
RSZCOMPDIR Directory of reporting components
RSZELTATTR Attribute selection per dimension element
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSZGLOBV Global Variables in Reporting
RSDCUBET Texts for the InfoCubes
Hint : If you want find more jus go to se11 --> put RS* and click the button you can see all.
assign points if this helps..
Thanks,
Sudhakar.
Similar Messages
-
How to find data base tables for a particular trancation code
Dear All,
Is there any T.code for finding data base tables used in a particular transaction code(Eg.: MM01).
Regards,
SatyapalliHello Satya
There is a very useful function module available for your requirement:
<b>RS_PROGRAM_TABLES</b>
Call this function module using:
OBJECT_TYPE = 'TRAN' " transaction
OBJECT_NAME = 'VA01'
" PROGRAM -> not required
MONITOR_ACTIVATE = 'X'
The function module will list you all DB tables touched by the transaction and shows whether they are read or updated (unfortunately, on ECC 5.0 this seems to be no longer the case. All tables are displayed as READ).
Regards
Uwe -
How to Read data base table at runtime
Hi,
i have an internal table with two fields they are
tablename and field name.
itab has some entries.
like :
itab-table name itab-fieldname
kna1 kunnr
mara matnr
vbuk vbeln
tvak auart
i want to read these tables with field names.
like :
loop at itab
select singe * from <itab-tablename> into <jtab>
where <itab-fieldname > = <dyanmic value from prog>.
endloop.
Is it possible to read the db table in the above scenario.
Please try to give me the solution.
Thanks,
srikHi, try this example program.
report zrich_0002 .
data: begin of itab occurs 0,
tabname(20) type c,
fldname(20) type c,
end of itab.
data: ref_descr type ref to cl_abap_structdescr.
data: where_clause(100) type c occurs 0 with header line.
data: it_details type abap_compdescr_tab,
wa_details type abap_compdescr.
data: new_table type ref to data,
new_line type ref to data,
it_fldcat type lvc_t_fcat,
wa_it_fldcat type lvc_s_fcat.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
start-of-selection.
itab-tabname = 'T000'.
itab-fldname = 'MANDT'.
append itab.
itab-tabname = 'T001'.
itab-fldname = 'BUKRS'.
append itab.
loop at itab.
* Get the structure of the table.
refresh it_fldcat.
refresh where_clause.
ref_descr ?= cl_abap_typedescr=>describe_by_name( itab-tabname ).
it_details[] = ref_descr->components[].
loop at it_details into wa_details.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-inttype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
append wa_it_fldcat to it_fldcat .
endloop.
if <dyn_table> is assigned.
refresh <dyn_table>.
unassign <dyn_table>.
endif.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
concatenate itab-fldname '<> ''' '''' into where_clause
separated by space.
append where_clause.
select * from (itab-tabname) into table <dyn_table>
where (where_clause).
endloop.
Regards,
Rich Heilman -
Need Information about TBD10 data base table
Hi Gurus,
Thanks in advance for looking at the issue.
I require information for the below questions ;
1.How is the data base table TBD10 populated i.e which transaction updates data
into this table.
2.How is this data base table used.
Please send your replies.
Thanks,
Bhanu.HI,
TBD10 --- Def., out of which IDOC fields a filter object is to be read
BD59 maintains that table
Rhea.
Edited by: rhea on Nov 4, 2008 2:09 PM -
Hello,
please help me to understand how the macros work. I am facing database inconsistency. The CRM-system retrieves a GUID of an opportunity’s item and checks its existence. However, this GUID (here it is es_info-ref_object) does not exist. As result, an exception is triggered.
I am trying to figure out which data base table is responsible for the inconsistent data. Instead of SELECT statement, I see in the debugger that a macro retrieves the “guilty” entry .
macro_execute macro_msg_data_read_rea.
My Question: How can I find a data base table containing a GUID, which is result of the macro’s execution?
Thanks a lot
AndrejWhen you save a PDF out of Distiller it doesn't just have different options, it's an entirely different program. It doesn't do things the same way, so it can't have the same options. Saving from Distiller is in many ways better, expecially in that transparency isn't flattened.
What specific options are you looking for? -
How to stored data after clicking checkbox in data base table
REPORT ZT .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = V_REPID
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'TRVPICTURE04'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR. " U CAN DELETE
SY-MSGV2 = WA-MATNR. " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888' " U CAN DELETE
WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
INSERT ZTABLE.
ENDIF.
endloop.
ENDCASE.
ENDFORM. "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
How to know who has created a particular record in the data base table
Hi All...
Can any one tell me how to track the information about who has entered the records in to the data base table....
Thanks in advance...You could check the Created By and Created On fields if your tables contains these fields.
OR
You could check the table DBTABLOG if table logging is enabled for the table
OR
You could check the Change document tables CDHDR and CDPOS.
-Kiran
Please mark useful answers -
How to insert data from different internal table into a data base table
hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work. -
How to find data dictionary and oracle schema tables for UTF8 char conversi
I am doing UTF8 char conversition, i got lot of convertable objects,as per document we don't need to worry about data dictionary objects and how to find data dictionary and oracle schema objects for UTF8 char conversition.
USER.TABLE Convertible Truncation Lossy
MDSYS.OPENLS_NODES 17 0 0
MDSYS.SDO_COORD_OP_PARAM_VALS 200 0 0
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE 1 0 0
MDSYS.SDO_STYLES_TABLE 78 0 0
MDSYS.SDO_XML_SCHEMAS 3 0 0
ORDDATA.ORDDCM_CT_PRED_OPRD 51 0 0
ORDDATA.ORDDCM_DOCS 9 0 0
ORDDATA.ORDDCM_MAPPING_DOCS 1 0 0
SYS.METASTYLESHEET 178 0 0
SYS.REGISTRY$ERROR 2 0 0
SYS.RULE$ 21 0 0
SYS.SCHEDULER$_EVENT_LOG 182 0 0
SYS.WRH$_SQLTEXT 2,099 0 0
SYS.WRH$_SQL_PLAN 1,736 0 0
SYS.WRI$_ADV_ACTIONS 5,452 0 0
SYS.WRI$_ADV_DIRECTIVE_META 5 0 0
SYS.WRI$_ADV_OBJECTS 2,278 0 0
SYS.WRI$_ADV_RATIONALE 9,594 0 0
SYS.WRI$_ADV_SQLT_PLANS 455 0 0
SYS.WRI$_ADV_SQLT_PLAN_STATS 288 0 0
SYS.WRI$_DBU_FEATURE_METADATA 188 0 0
SYS.WRI$_DBU_FEATURE_USAGE 16 0 0
SYS.WRI$_DBU_HWM_METADATA 20 0 0
SYS.WRI$_REPT_FILES 27 0 0
XDB.XDB$DXPTAB 2 0 0
XML CSX Dictionary Tables:
USER.TABLE Convertible Truncation Lossy
Application Data:
USER.TABLE Convertible Truncation Lossy
APPLSYS.BISM_OBJECTS 4 0 0
APPLSYS.DR$FND_LOBS_CTX$I 0 103 1,260,883
APPLSYS.FND_CONC_PROG_ANNOTATIONS 272 0 0
APPLSYS.FND_OAM_CONTEXT_FILES 15 0 0
APPLSYS.FND_OAM_DOC_LINK 1 0 0
APPS.FND_OAM_CONTEXT_FILES_1 6 0 0
AZ.AZ_APIS 11 0 0
AZ.AZ_SELECTION_SET_ENTITIES_B 48 0 0
ECX.ECX_DTDS 205 0 0
ECX.ECX_FILES 91 0 0
IBC.IBC_ATTRIBUTE_BUNDLES 41 0 0
JTF.JTF_HEADER_DTD 1 0 0
JTF.JTF_MESSAGE_OBJECTS 82 0 0
JTF.JTY_TRANS_USG_PGM_SQL 29 0 0
ODM.ODM_PMML_DTD 1 0 0
OKC.OKC_REPORT_SQL_B 3 0 0
OKC.OKC_REPORT_SQL_TL 2 0 0
OKC.OKC_REPORT_XSL_TL 5 0 0
XDP.XDP_PROC_BODY 10 0 0
[Distribution of Convertible, Truncated and Lossy Data by Column]
Data Dictionary Tables:
USER.TABLE|COLUMN Convertible Truncation Lossy
MDSYS.OPENLS_NODES|SYS_NC00004$ 17 0 0
MDSYS.SDO_COORD_OP_PARAM_VALS|PARAM_VALUE_FILE 200 0 0
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE|XMLSCHEMA 1 0 0
MDSYS.SDO_STYLES_TABLE|DEFINITION 78 0 0
MDSYS.SDO_XML_SCHEMAS|XMLSCHEMA 3 0 0
ORDDATA.ORDDCM_CT_PRED_OPRD|SYS_NC00004$ 51 0 0
ORDDATA.ORDDCM_DOCS|SYS_NC00005$ 9 0 0
ORDDATA.ORDDCM_MAPPING_DOCS|SYS_NC00007$ 1 0 0
SYS.METASTYLESHEET|STYLESHEET 178 0 0
SYS.REGISTRY$ERROR|MESSAGE 1 0 0
SYS.REGISTRY$ERROR|STATEMENT 1 0 0
SYS.RULE$|CONDITION 21 0 0
SYS.SCHEDULER$_EVENT_LOG|ADDITIONAL_INFO 182 0 0
SYS.WRH$_SQLTEXT|SQL_TEXT 2,099 0 0
SYS.WRH$_SQL_PLAN|OTHER_XML 1,736 0 0
SYS.WRI$_ADV_ACTIONS|ATTR5 2,726 0 0
SYS.WRI$_ADV_ACTIONS|ATTR6 2,726 0 0
SYS.WRI$_ADV_DIRECTIVE_META|DATA 5 0 0
SYS.WRI$_ADV_OBJECTS|ATTR4 2,278 0 0
SYS.WRI$_ADV_RATIONALE|ATTR5 9,594 0 0
SYS.WRI$_ADV_SQLT_PLANS|OTHER_XML 455 0 0
SYS.WRI$_ADV_SQLT_PLAN_STATS|OTHER 288 0 0
SYS.WRI$_DBU_FEATURE_METADATA|INST_CHK_LOGIC 21 0 0
SYS.WRI$_DBU_FEATURE_METADATA|USG_DET_LOGIC 167 0 0
SYS.WRI$_DBU_FEATURE_USAGE|FEATURE_INFO 16 0 0
SYS.WRI$_DBU_HWM_METADATA|LOGIC 20 0 0
SYS.WRI$_REPT_FILES|SYS_NC00005$ 27 0 0
XDB.XDB$DXPTAB|SYS_NC00006$ 2 0 0
XML CSX Dictionary Tables:
USER.TABLE|COLUMN Convertible Truncation Lossy
Application Data:
USER.TABLE|COLUMN Convertible Truncation Lossy
APPLSYS.BISM_OBJECTS|SYS_NC00023$ 4 0 0
APPLSYS.DR$FND_LOBS_CTX$I|TOKEN_TEXT 0 103 1,260,883
APPLSYS.FND_CONC_PROG_ANNOTATIONS|PROGRAM_ANNOTAT 272 0 0
APPLSYS.FND_OAM_CONTEXT_FILES|TEXT 15 0 0
APPLSYS.FND_OAM_DOC_LINK|DOC_LINK_INFO 1 0 0
APPS.FND_OAM_CONTEXT_FILES_1|TEXT 6 0 0
AZ.AZ_APIS|FILTERING_PARAMETERS 11 0 0
AZ.AZ_SELECTION_SET_ENTITIES_B|FILTERING_PARAMETE 48 0 0
ECX.ECX_DTDS|PAYLOAD 205 0 0
ECX.ECX_FILES|PAYLOAD 91 0 0
IBC.IBC_ATTRIBUTE_BUNDLES|ATTRIBUTE_BUNDLE_DATA 41 0 0
JTF.JTF_HEADER_DTD|HEADER_DTD 1 0 0
JTF.JTF_MESSAGE_OBJECTS|BUS_OBJ_DTD 41 0 0
JTF.JTF_MESSAGE_OBJECTS|BUS_OBJ_SQL 41 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_DEA_SQL 1 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_INCR_SQL 5 0 0
JTF.JTY_TRANS_USG_PGM_SQL|BATCH_TOTAL_SQL 6 0 0
JTF.JTY_TRANS_USG_PGM_SQL|INCR_REASSIGN_SQL 5 0 0
JTF.JTY_TRANS_USG_PGM_SQL|REAL_TIME_INSERT 6 0 0
JTF.JTY_TRANS_USG_PGM_SQL|REAL_TIME_SQL 6 0 0
ODM.ODM_PMML_DTD|DTD 1 0 0
OKC.OKC_REPORT_SQL_B|SQL_TEXT 3 0 0
OKC.OKC_REPORT_SQL_TL|HELP_TEXT 2 0 0
OKC.OKC_REPORT_XSL_TL|HELP_TEXT 2 0 0
OKC.OKC_REPORT_XSL_TL|XSL_TEXT 3 0 0
XDP.XDP_PROC_BODY|PROC_BODY 10 0 0
-------------------------------------------------- ---------------- ---------------- ----------------Hi;
Please run below query which could be helpful for your issue:
select * from dictionary where TABLE_NAME LIKE '%NLS%'
select * from dictionary where TABLE_NAME LIKE '%GLOBAL%'
Regard
Helios -
How to control the name of custom field in data base table, added by AET
Hi,
I have added the one custom field by Application Enhancement Tool (AET).
The name of custom field has been added in the data base table as ZZFLD000004 by AET.
I need to add the some meaningful name like that ZMYPROB.
How can I control the name of custom field in the database field through AET?
Thanks,
AmitGot the answer.
Need to click on the Enable Expert mode, then custom field name will be editable. -
How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN
How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN
Hi
One Database table contain 249 Fields.
Rewards Points if useful..
Regards
Nikunj Shah
Edited by: Nikunj Shah on May 13, 2008 1:08 PM -
How to stored data after clicking check box save in data base table
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gw_fieldcat TYPE slis_fieldcat_alv,
gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
mseg JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
SORT itab BY matnr.
PERFORM display_alv_output.
ENDIF.
*& Form display_alv_output
text
--> p1 text
<-- p2 text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZREPORT'
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fieldcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " display_alv_output
this is mycode .
send me replay.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
How to find from which table we r fetching the data
Hi friends,
i got a requirement to design a query,in my transfer rules i check the info object related to the fiels.but in my crm the field name is different.
how to find from which table the field is fetched........
please tell me........
Regards
sridathDear Sridath,
In ST05 switch on the SQL Trace.
Goto RSA3.
Give your DataSource name > Execute
Goto ST05...Switch OFF the Trace
Analyze the Trace file
Gives you details about the fields and Tables from where you are fetching.
OR
Goto LBWE
Find your DataSource > Maintenance > Display mode
In right side window...expand ALL list box...
Exclude MC and take other words...they are the Source Tables.
Regards,
Ramkumar. -
How to modify a data base table ?
Hi,
i am working on a list output where if user is editing a field and that field need to be updated in the data base. table is a z table .
the table has 5 fields .
mandt key field
matnr key field
werks key field
charg key field
lgpla key field
usnam
edate
in the list output , the user will change the values in the lgpla field and that field need to be changed in the data base table.
i have used the stmt :
modify< table> from <internal table> ,
but a new record is added in the data base instead of overwriting the existing one.
but the record can be seen modified in the internal table.
kinldy let me know the method of updating or modifying the existing value in the data base.
thanks and regards,
vikram.Hi,
Its not possible to change Primary Key contents in the database.
it mention in documentation of MODIFY Statement,
a line is searched for in the database table that has the same content
in the primary key as the corresponding beginning part of the work area.
If such a line is not found,
a new line is inserted according to the same rules as for the INSERT statement.
If such a line is found,
this line is overwritten according to the same rules as for the UPDATE statement
if you want insert the modified line first Delete from database,Then Use Modify Statement
Regards,
Raghava Channooru -
Hi,
My data base Table master_accouts contain some of child tables. I would like to
Know How can i findout How many tables/what r those tables. Please guide me.
warm regards,
Venkat.Hi,
My data base Table master_accouts contain some of child tables. Could you please give more information on what you want ?
If you want to find the constraints then yo can use ALL_CONS_COLUMNS view to get the constraints.
Thanks
Maybe you are looking for
-
How to configure jar files in BAT file
hi to all .I have one doubt. how to configure the no.fo jar files in BAT file. can any one help me thanks
-
I was running a time machine back up and did a couple other things, now the machine is totally frozen, complete with the beach ball of death. Can I do a hard reboot and not lose my entire hard drive? Thanks!
-
Need Help In Solving Writing To Queue Problem
Hi Guys, I have two threads that are adding to the same message queue. The first one is suppose to add four integers consecutively. Meanwhile the second thread add an integer in between the four integers. Because of that my application is not working
-
Regarding oracle8i to Oracle9i server upgradation
Hai all Its about a up gradation project, I'm totally new to this server up gradation projects Can someone guide me 1. what are all the things that we should be knowing before going for a sever up gradation from oracle 8i to oracle 9i ( i.e.) like a
-
In PS CS 6, I somehow turned off the crosshair that used to be in the center of the Liquify tool. I'd like to get it back. How does one turn this on/off?