How to find datasource for cube 0BCS_C11

Now we plan to do BCS. We want to create a cube ZBCS_C11 to copy real-time cube 0BCS_C11, the question is how to find datasource? Is there any standard datasource? Pls info, thanks!

hi,
For reporting purposes, you can use the virtual InfoCube 0BCS_VC11 u2013 Consolidation (Company/Consolidation Profit Center). It shares the same structure as InfoCube 0BCS_C11.
go through this link.
http://help.sap.com/saphelp_nw70/helpdata/EN/05/fdce0e59a82b4da957ead6e8022233/frameset.htm
regards
vadlamudi

Similar Messages

  • How to generate datasource for inforsource in BW 7

    Hi all:
         Could you please tell me how to generate datasource  for inforsource  in BW7, it seems that the way
    is different from other lower edition BW 3.x.   Should I  choose   Tranformation  ? and then how ?
    Thank you very much!
    Edited by: jingying Sony on May 9, 2009 8:41 AM

    1) First thing is that in BI 7.x the infosource is optional.You can directly create a transformation between datasource and data target (e.g. cube). If you still want to use a infosource then you will require 2 transformations. 1 will act as a transfer rule and other one will act as a update rule. This is a crude example showing the comparision between 3.x and 7.x.
    2) Infopackage in 7.x will load the data only till PSA. From PSA to data target you will need DTP. DTP will load data from PSA to data target. So you need to ensure you create a complete flow from datasource to data target and create infopackage & DTP.

  • How to create DataSource for FlatFile Source Systems

    Hi,
    I am practicing BI7.I am familiar with BW 3.5 but while practicing BI7 i am facing some problems.I am trying to load master data of an infoobject (STUDENTID) STUDENTID ATTR.
    After creating Appl Comp and when i am trying to create transformations for the master data attribute i am unable to assign data source.I came to know that i have to create datsource at this step.But dont know how to create datasource for FlatFiles.
    Can anyone give me stpes how to create DataSource.
    Thanks in advance,
    Sunny

    Hi
    Find below help link for procedure
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
    and below are some help links which will be usefull in BI7.0
    http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Look at this new features in Bi 7.0
    http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    how to's in BI 7.0
    http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    Demo's
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
    Report designer new component
    Most of ur solutions u can get through help or SDN search
    Regards,
    Ravi

  • How to find Transaction for a Known Table maintenance View

    Hello Friends,
    May I know how to find transaction for a known table maintenance View.
    Thanks,
    Best Regards,
    Sudhanshu Garg

    Goto SE16 Transaction and enter TSTCP Table
    Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
    enter table name in bold.
    Thanks
    Seshu

  • Im looking how to find driver for Printer HP 2300 driver window 8 (64BIT) PLEASE help !!! stuck

    Hi ,
    I need help how to find driver for my old printer HP 2300d I use USB Cable for my Laptop window 8 (64 bit)
    help I am stuck can't print anything.
    Kim

    Hi, Welcome to hp forums and enjoy your stay, feel yourself like home here!
    I am very sorry to hear this, I will try my best to help you, I am always glad to help!
    Please follow the steps i provided below:
    1. http://windows.microsoft.com/en-ca/windows7/automatically-get-recommended-drivers-and-updates-for-yo...
    Now refer to the below link and right click your printer device
    2. http://pcsupport.about.com/od/windows-8/a/update-drivers-windows-8.htm
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • How to find TCodes for Config Transactions

    Hi All,
    How do I find the TCode for a Config Activitity node?
    For example.
    OX09 is for "Maintain Storage Location"
    OB52 is for FI Period closing/opening
    I know these from google search, but how do find tcodes for other IMG activity nodes?
    Thanks in advance!

    Go to SPRO and in Menu Additional Information Click Display key and IMG activity then Sytem will show the SPRO Transaction along with path
    Else Go to Particular Node say Create Purchasing Group and Right Click on Node and Select Display Technical Info and in ID tab the Last four Charecters wud be the Trxn code.
    In SPRO-IMG screen Only Few Nodes will Show  / have the Transaction codes.

  • How 2 find program for smartform

    how 2 find program for smartform

    Hi,
    go to TNAPR table and find the driver program for the layout.
    give the layout name, if you know the output type also give it.
    OR
    go to se71 and go to the layout , check the text elements syntax then it will show the possible driver programs in the window to choose.
    that way you can find..
    Or else...
    Go to the Tcode -> NACE
    OR
    Go to the T-code 'SMARTFORMs'
    Give your form name
    go to the general attributes.
    Check the Package name.
    then go to T-Code-> SE80
    there check the program name for a package wise
    Regards,
    KK
    Message was edited by:
            Kishore Kumar Karnati

  • How to find datasource and standard cube for given R/3 table

    Hi All,
    Can anyone help me that how to find a datsource, standard cube and Standard BI reports for given R/3 table.
    For example if am having the table names "EKKO (Header)
    EKPO (Line item)
    EKET (Schedule Lines)
    EKBE (PO History)
    EKKN (Account Assignment/WBS)
    EKAN/EKPA (Partner Info)" for all these tables how can i find the standard datasource and standard Cube.
    Please help in this. I will assign the points.
    Regards,
    Shanthi

    https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
    MM
    Data Sources Tables
    Purchasing
    2LIS_02_SCL EKKO, EKBE, T001, T001W, EKET, EKPA.
    2LIS_02_HDR EKKO, EKBE, T001, EKPA.
    2LIS_02_ITM EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
    2LIS_02_SCN EKET, EKES, EKPO.
    2LIS_02_CGR EKBE, EKES, EKPO.
    2LIS_02_SGR EKET, EKBE, KKPO
    Inventory
    2LIS_03_BX stock tables, MCHA, MARA, T001, T001W, CALCULATED FROM MBEW, EBEW, QBEW.
    2LIS_03_BF MSEG, MBEW, MKPF.
    2LIS_03_UM BKPF, MBEW, QBEW, EBEW, BSEG.
    MM  
    Purchasing   Datasources
    ODS  
    0PUR_O01  2LIS_02_ITM, 2LIS_02_SGR, 2LIS_02_CGR, 2LIS_02_SCN.
    0PUR_O02  2LIS_02_HDR, 0PUR_O01
    0PUR_DS03  2LIS_02_SCL and 2LIS_02_SGR.
    CUBE  
    0PUR_C10  2LIS_02_SCL and 2LIS_02_SGR.
    0PUR_C07 
    0PUR_C08 
    0PUR_C09  0PUR_O02, 80PUR_O01, 2LIS_02_HDR
    0SRV_C01  2LIS_02_S174
    0PUR_C04  2LIS_02_S011, 2LIS_02_SCL, 2LIS_02_ITM, 2LIS_02_HDR
    0PUR_C01  2LIS_02_S012, 2LIS_02_ITM, 2LIS_02_SCL
    0PUR_C02  2LIS_02_S013
    0PUR_C05  0MM_PUR_VE_01
    0PUR_C06  0MM_PUR_VE_02
    0PUR_C03  2LIS_02_S015
    Inventory Management  
    CUBE  
    0IC_C03  2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM
    0IC_C02  2LIS_03_S195, 2LIS_03_S197
    0IC_C01  2LIS_03_S196, 2LIS_03_S198
    SD 
    Data sources Tables
    2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
    2LIS_11_VAHDR VBAK, VBUK, T001
    2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
    2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
    2LIS_11_VASTH VBUK
    2LIS_11_VASTI VBUP, VBUK
    2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
    2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
    2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
    2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
    FI 
    DATASOURCES Tables
    Cost Center Accounting 
    0CO_OM_CCA_1 COSP, COSS
    0CO_OM_CCA_2 COSP, COSS
    0CO_OM_CCA_3 COSL, COKL.
    0CO_OM_CCA_4 COSR
    0CO_OM_CCA_5 COSB
    0CO_OM_CCA_6 COOMCO
    0CO_OM_CCA_7 BPJA, BPPE.
    0CO_OM_CCA_8 COST, TKA07,COOMCO, CSLA, COST, COKL.
    0CO_OM_CCA_9 COVP (COEP& COBK), COSP, COST, COEJ, COEP, T001.
    0CO_OM_CCA_10 COOI, COSP_VTYPE.
    Product Cost Controlling 
    0CO_PC_PCP_01 KEKO, TCKH3, TCKH8.
    0CO_PC_PCP_02 KEKO, TCKH3.
    0CO_PC_PCP_03 CKIS, T001K, TKA02, KEKO, MARA, MBEW.
    0CO_PC_PCP_04 CKIS, T001K, TKA02, KEKO, MBEW, MARA
    0CO_PC_01 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
    0CO_PC_02 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
    Hope this Helps.

  • How to find datasources in in r/3 for HR fileds

    Hi BW guru's
    i want extract data from these fields from r/3 to bw .
    ARBST
    WOSTD
    WKWDY
    i find teese are in PA0007 table , but i dont know which  standard datasources supports for these fields.
    how to find the exact datasource for thes fields ?
    it is very argunt...
    waiting for fast reply..
    i will assign more points for fast reply
           Thank u
            PSR

    Hi,
    I had a scenario where I was required to bring in fields WOSTD, WKWDY in BW but that doesnt come thru standard datasource. So I had enhanced datasource 0HR_PA_0 and had added these fields to it.  You would be required to write user exit code in RSAP0001 to populate those fields. Its little tricky as data is time dependent and records comes in different date ranges.
    Abhijit

  • How to create infopackage for Cube to Cune to transaction

    HI Experts
    I have performed following steps for cube to cube load.
    1. Created source cube and loaded the data from R3
    2. Created Destination cube
    3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
    4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
    5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource.  its not showing up any name with 8ZFIGL_C01.
    Kindly let me know how to create infopackage for this to laod the data from cube to cube.
    Additional information:
    I have set the optopn Display Generated Object in Settings.
    Thanks in advance for your help.
    Regards
    NLN

    Hi,
    Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
    See solution from SAT:
    Problems with Infosource Data Marts
    Best regards,
    Frank

  • How to find out which cube/ods has the code

    hi,
    I want to find out which cube/ods has the start routine/update rules written in it.  Is there a table or Tcode to find out the code instead of opening each cube/ods to find out whether there is code in it or not.
    Thanks,
    Sam

    hi Sam,
    take a look
    /message/3483792#3483792 [original link is broken]
    try RSTRAN, field STARTROUTINE
    related tables
    RSAROUT
    RSAABAP
    RSAABAPINV
    RSAROUTT
    Technical name of start routine
    Re: How to get info about a GP* program?
    Re: Search for start, update rule, etc. that uses infoobject
    if couldnt find out, you can use ST05 'sql trace', open 2 session, one for create start routine, and one for ST05, activate with option 'sql trace', then create start routine and 'deactivate trace' and 'display trace', and check out the tables list
    hope this helps.

  • Aggregates...How to find out for a query..Any TC??

    Hi friends,
    How to find out whether the query is using aggregates or not, which are built on its base cube. Is there any TCode for it to know?. Without going to Infocube maintenance tab, can we know whether queries use aggegates???
    Thanks
    Murthy

    Go to RSRT transcation in bw
    there u select the query on  cube where u created an aggergates click Execute+debug(you vl be presented with select"show aggregates used"also check Nochache now click the tickmark.
    It  vl show you how many aggegates are there for the cubes and how many aggegates are used for the particular query used .Go to table RSDDSTAT this  shows every navigational step for a query and vch aggregates it used.
    thanks
    Prasanth Reddy

  • FI - How to find KOSTL for Single FI Documents / Invoices

    Hi experts,
    can someone explain me how to find the reight KOSTL for every Single Document/Invoice. Because the Filed within BSEG does not always contain
    the information (=empty). e.g for Documents in BSEG with KOART = 'A' or 'S' etc...
    Many Thanks in advance.
    Ali

    Hi Eric,
    this is exactly the point. I am trying to Extract towards BW with the
    0FI_GL_4 Datasource all Items for Debits / Kredits whisch are mostly coming from the (BSID/BSAD) / (BSIK/BSAK) but for the most records i do not have a Costcenter. But what i know is that for example Items with the KOART 'A' Assets have a costcenter assigned somwehere in the table ANLZ. What i am looking for are the rules with which i can get
    the KOSTL the diffrent KOART's in the BSEG.
    Which tables and conditions do provide the KOSTL for
    KOART EQ 'A' / 'S' / 'M' / 'D' or 'K'. I am new to FI and do not exactly
    now the relations / tables.
    With that information i will enhance my Extract to that selection logic and i will be fine
    hopefully
    many thank in advance to all who can help out with any kind of information to that topic.
    Regards,
    Ali

  • How to find licence for Hyperion Software

    Hi,
    I want "Essbase Application Manager" for one of my team member but somehow our desktop support team is not able to find this software in their catalog . I think name of the software may be changed.
    I have same software on my desktop but it is inside "Hyperion Solutions" SOftware . Does anyone have any idea on my situatuin.
    Is there any Hyperion product in which I can ""Essbase Application Manager" for my day to day work
    Also I want to find licence for the Hyperion SOLutions software on my desktop. Can anyone tell me how I can find it ?

    What version of Essbase are you running? I think Application Manager was decommissioned in Version 6 (although it might have been Version 7). It was replaced by Essbase Administration Services(EAS). Application Manager does not need a license as it is just an administrative tool for Essbase. For the license number again it depends on the version. Later version do not have a license number, earlier versions do. In some cases you can get it from App Manager by getting server properties and it will show you. In other versions, you would start Essbase in foreground and it will show you the license as it starts. Essbase 7.16, System 9.3.1 and Version 11 do not have licenses that you have to enter.

  • How to find values for fields of  PROPERTIES  in cl_crm_documents= create_w

    Hi  everyone ,
    I am attaching files from local disk to CRM Opportunity by using method cl_crm_documents=>create_with_file .
    I am able to see files in SAP frontend portal , but the problem is some of the fields in properties tab coming blank .
    So how to find the NAME and VALUE fields of PROPERTIES structure in create_with_file  .
    Right now i am passing below fields these ar coming
    "-----Filling Properties structure
        ls_prop-name   = 'KW_RELATIVE_URL'.
        ls_prop-value  = wa_path-ls_name.
        APPEND ls_prop TO lt_prop.
        ls_prop-name   = 'DESCRIPTION '.
        ls_prop-value  = 'Strategy paper for action plan1' .
        APPEND ls_prop TO lt_prop.
    ls_prop-name  = 'LANGUAGE'.
        ls_prop-value = sy-langu.
        APPEND ls_prop TO lt_prop.
    but fileds like Attachment Type , Document Status ,  Line of Business , Business Year and Country of LE are not coming
    as i frontend is a CRM custom application to mentain opportunity .
    at prasent i am passing attribute Names and default values of these fields to properties structure  but then also i am unable to see it in front end.
    Please help if anybody knows where to find the NAME and VALUE fields for thse parameters.
    Regards
    Chetan

    I used insert statement to populate these fields in table CRMD_KW_DOC_GEN as these are custom fields.
    Regards
    Chetan

Maybe you are looking for